Database Info

Redmi 6 EDL Test Point?

My Redmi 6 was Hard Bricked by installing the wrong TWRP (check out the other posts that describe this problem) and none of the solutions mentioned worked for me; then recently I discovered that most of the other Xiaomi/Redmi phones have what's called "EDL Mode", or Test Point Mode which let's you repair a Hard Bricked device even with a locked bootloader. Does anyone know if this mode can be activated on this device (and if so, with which points on the device)?

Mtk does'nt have edl mode (and maibi test poin too)
U need mi auth account to unbrick

wulan17 said:
Mtk does'nt have edl mode (and maibi test poin too)
U need mi auth account to unbrick
Click to expand...
Click to collapse
How would I unbrick it with a Mi Auth Account?

Yoss Roness said:
How would I unbrick it with a Mi Auth Account?
Click to expand...
Click to collapse
go to an authorized service center

burzaa4 said:
go to an authorized service center
Click to expand...
Click to collapse
No, say I had access to a Xiaomi Auth Account - how would I go about fixing the phone?

Yoss Roness said:
No, say I had access to a Xiaomi Auth Account - how would I go about fixing the phone?
Click to expand...
Click to collapse
In my opinion, you do not have because if you had an authorized account, you would know how to probably inform them how to repair phones. If you have a fastboot, you will repair the phone with the mi falsh program.
If you don't have a fastboot, then the spFlash tool will put Da and scatter and auth file there, if the error Status brom cmd fail (0xC00600005) means that you do not have permission to repair it and you will practically not repair it yourself. See thread Hard Brick redmi 6, no Fastboot mode.If I am wrong, somebody correct me.

burzaa4 said:
In my opinion, you do not have because if you had an authorized account, you would know how to probably inform them how to repair phones. If you have a fastboot, you will repair the phone with the mi falsh program.
If you don't have a fastboot, then the spFlash tool will put Da and scatter and auth file there, if the error Status brom cmd fail (0xC00600005) means that you do not have permission to repair it and you will practically not repair it yourself. See thread Hard Brick redmi 6, no Fastboot mode.If I am wrong, somebody correct me.
Click to expand...
Click to collapse
I read somewhere that MediaTek has a test point equivalent, gold points, and then I saw this video. Would this fix my Redmi 6?

Yoss Roness said:
I read somewhere that MediaTek has a test point equivalent, gold points, and then I saw this video. Would this fix my Redmi 6?
Click to expand...
Click to collapse
See here https://4pda.ru/forum/index.php?showtopic=907017&st=7120 There is a lot more about redmi 6. What you show is a total demolition of the phone. All forums (hovetek, gsmdevelopers, 4pda, xda, miui etc. ) say that you can't fix it yourself, you need to find someone with a service account. If it were otherwise they would have written somewhere about it and not immediately showed it. Don't look for a solution on youtube because it's the same fake.

burzaa4 said:
See here https://4pda.ru/forum/index.php?showtopic=907017&st=7120 There is a lot more about redmi 6. What you show is a total demolition of the phone. All forums (hovetek, gsmdevelopers, 4pda, xda, miui etc. ) say that you can't fix it yourself, you need to find someone with a service account. If it were otherwise they would have written somewhere about it and not immediately showed it. Don't look for a solution on youtube because it's the same fake.
Click to expand...
Click to collapse
Thanks bro, that russian site led me to miflashpro.com and that tool did everything I needed. It helped me flash the stock rom (zip file, not fastboot) in recovery.
I had this problem: "system destroyed" message after upgrade gone wrong, no unlocked bootloader, no Mi account on the phone, USB debugging turned off. Been struggling with this for a week, nothing worked until I found miflashpro.

Fritzzie said:
Thanks bro, that russian site led me to miflashpro.com and that tool did everything I needed. It helped me flash the stock rom (zip file, not fastboot) in recovery.
I had this problem: "system destroyed" message after upgrade gone wrong, no unlocked bootloader, no Mi account on the phone, USB debugging turned off. Been struggling with this for a week, nothing worked until I found miflashpro.
Click to expand...
Click to collapse
Can you write a procedure using miflashpro?
I have the same problem.

Question Super-Hard Bricked OnePlus 9

I have an extremely big problem, maybe someone could help me here?
So today I tried to flash diffrent OOS version on my OnePlus 9, I did it with fastboot, after the command "fastboot reboot fastboot" the screen on the phone went blank and there was a sound on the computer as if the phone was still connecting and disconnecting. Now, the phone does not respond to the buttons, the charger, I cannot enter the fastboot, only the EDL mode works, but I cannot use the MSM because it does not detect the phone, I get the "sahara communication failed" notification all the time, previously the same MSM version was working.
Probably the most important thing is that it turned out that the OOS I tried to flash was actually ColorOS, I didn't pay attention to it, I don't know how it happened.
I feel like an idiot, I'm afraid that I will not save this phone myself and that the repair service will also not accept it under warranty, any suggestions?

MSM cannot recognize your phone aka. Sahara Connection error? Check this.
Hi! Today i successfully bricked my OP9 to the point where the global MSM tool couldn't recognize it anymore. I tried everything, from different MSM tools to this thread. Nothing. Then, Deus ex Machina, @flameteam recommended me to try...
forum.xda-developers.com

Rayekk said:
I have an extremely big problem, maybe someone could help me here?
So today I tried to flash diffrent OOS version on my OnePlus 9, I did it with fastboot, after the command "fastboot reboot fastboot" the screen on the phone went blank and there was a sound on the computer as if the phone was still connecting and disconnecting. Now, the phone does not respond to the buttons, the charger, I cannot enter the fastboot, only the EDL mode works, but I cannot use the MSM because it does not detect the phone, I get the "sahara communication failed" notification all the time, previously the same MSM version was working.
Probably the most important thing is that it turned out that the OOS I tried to flash was actually ColorOS, I didn't pay attention to it, I don't know how it happened.
I feel like an idiot, I'm afraid that I will not save this phone myself and that the repair service will also not accept it under warranty, any suggestions?
Click to expand...
Click to collapse
See link below. Worked for me I was in same position.

ctonylee1965 said:
See link below. Worked for me I was in same position.
Click to expand...
Click to collapse
Thank you very much! Tbh I can't understand how and why it works, but it worked!

Rayekk said:
Thank you very much! Tbh I can't understand how and why it works, but it worked!
Click to expand...
Click to collapse
Make sure you look at the rest of the instructions to get back on global from Indian.

Rayekk said:
Thank you very much! Tbh I can't understand how and why it works, but it worked!
Click to expand...
Click to collapse
Brother what is your phone model is it Chinese (Le2110)? or another model ?

bro i have the same issues , did u found any solution & can you help me plz

See if these steps work for you: (last post)
Display becomes unresponsive after OOS 12 update
I upgraded my OnePlus 9 LE2115 from OOS 11 to OOS 12, and every time the phone reboots after completing the update, the touch screen is completely unresponsive, so it stays stuck at the lock screen forever. I upgraded from OOS 11.2.10.10 to OOS...
forum.xda-developers.com

Hey, i have hardbricked my OnePlus 9 and now i have the connect and disconnect-problem in the EDL-Mode. My Model is a Lahaina and i hope it is the same like a Lemonade or a OnePlus 9. I was on the latest Android 12 for the OP 9 before it gets bricked. How i bricked my phone: First i have unlocked the Bootloader and after that i was trying to boot into TWRP. The bootscreen from TWRP comes and the screen gets black and then into boot dump mode. okay, then i installed this: https://forum.xda-developers.com/t/fastboot-rom-pc-required-op9-stock-oos-11-2-2-2aa.4275727/unread and the message <awaiting any device> shows up and i disconnected my phone. After that my phone just shows black and on the pc it just shows up the "QDLoader" (yes, the driver is installed) . How i could bring my phone back to life and fix the partitionproblem/connect & disconnect problem. The MSM just shows "Status of Connection: N/A" and "Waiting for device". I am using an Laptop with Windows 10 on it and an intel chipset.
I think i have killed the partitioning of the oneplus by downgrading from A 12 to A 11. Thanks for your help. By the way: I have downloaded the MSM with Indian OS and I have still the same problem.

I´ve got exactly the same situation and problem as DerBaLu841... Anything to do for now or is the OP9 finally hard bricked now..?

kischde said:
I´ve got exactly the same situation and problem as DerBaLu841... Anything to do for now or is the OP9 finally hard bricked now..?
Click to expand...
Click to collapse
Check this out:
MSM cannot recognize your phone aka. Sahara Connection error? Check this.
Hi! Today i successfully bricked my OP9 to the point where the global MSM tool couldn't recognize it anymore. I tried everything, from different MSM tools to this thread. Nothing. Then, Deus ex Machina, @flameteam recommended me to try...
forum.xda-developers.com

DerBaLu841 said:
Check this out:
MSM cannot recognize your phone aka. Sahara Connection error? Check this.
Hi! Today i successfully bricked my OP9 to the point where the global MSM tool couldn't recognize it anymore. I tried everything, from different MSM tools to this thread. Nothing. Then, Deus ex Machina, @flameteam recommended me to try...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi! Have you telegram? Can I ask to you help with the method you posted?

Xiaomi Mi5 linageos 19.1 bricked after fastboot oem lock ?

Hello everybody,
i'm not new in custom roms, but i have a problem, i can't solve by myself:
I flashed an unlocked Mi5 to linageos 19.1 without problems.
I had the bad idea to relock the bootloader due to security reasons (fastboot oem lock).
Now the device is not booting anymore, i can just see the Mi-Logo flashing very shortly.
I can access fastboot, but can't boot into recovery.
I tried to unlock the device again, but the Mi Unlocker fails and prompts me to go to the developer options in Miui, which is clearly impossible.
Any chance to proceed from fastboot (fastboot oem unlock does not work...) ?
Thanks, Jan

congrats, you succesfully hard bricked your phone. please take it for a walk to the xiaomi service and pay for gettting it fixed. who told you it is a good idea to relock the bootloader with a custom rom installed ?

Fytdyh said:
congrats, you succesfully hard bricked your phone. please take it for a walk to the xiaomi service and pay for gettting it fixed. who told you it is a good idea to relock the bootloader with a custom rom installed ?
Click to expand...
Click to collapse
actually, i remember some banking apps complained about the locked bootloader. I thought i can lock/unlock it in fastboot mode, but looks like i was wrong.
I will give the MiFlash Tool a chance, but i have not much hope...
@Fytdyh: do you think, Xiaomi Service can fix it ?

jever2k said:
actually, i remember some banking apps complained about the locked bootloader. I thought i can lock/unlock it in fastboot mode, but looks like i was wrong.
I will give the MiFlash Tool a chance, but i have not much hope...
@Fytdyh: do you think, Xiaomi Service can fix it ?
Click to expand...
Click to collapse
Make sure if your bootloader is really locked or not using fastboot command
fastboot oem device-info
OR,
fastboot getvar unlocked
If it's not locked, you can simply flash your stock rom using flash tool available for mi. Before downloading a rom from internet, take note of your device info using fastboot command ,
fastboot getvar all
And if bootloader is really locked, you have to flash stock rom from EDL mode. You may have to remove back cover to turn on EDL mode. Your device has snapdragon chipset (Plus point). Watch tutorials about xiaomi edl rom flash - snapdragon. You can go to service centre. If they tell you that you have to replace motherboard, don't be agree. Tell them to flash rom using EDL mode.

Tawsif999 said:
Make sure if your bootloader is really locked or not using fastboot command
fastboot oem device-info
OR,
fastboot getvar unlocked
If it's not locked, you can simply flash your stock rom using flash tool available for mi. Before downloading a rom from internet, take note of your device info using fastboot command ,
fastboot getvar all
And if bootloader is really locked, you have to flash stock rom from EDL mode. You may have to remove back cover to turn on EDL mode. Your device has snapdragon chipset (Plus point). Watch tutorials about xiaomi edl rom flash - snapdragon. You can go to service centre. If they tell you that you have to replace motherboard, don't be agree. Tell them to flash rom using EDL mode.
Click to expand...
Click to collapse
looks like i am getting closer... located the two EDL points to short during PC connection, installed the Qualcomm serial driver. For a second i see the device appearing as COM6 but then it disappears again and is not availiable anymore.
Any hints ?
Thanks again, Jan

jever2k said:
looks like i am getting closer... located the two EDL points to short during PC connection, installed the Qualcomm serial driver. For a second i see the device appearing as COM6 but then it disappears again and is not availiable anymore.
Any hints ?
Thanks again, Jan
Click to expand...
Click to collapse
Try this to solve the issue.
If it doesn’t help, read this to boot properly into edl

jever2k said:
Hello everybody,
i'm not new in custom roms, but i have a problem, i can't solve by myself:
I flashed an unlocked Mi5 to linageos 19.1 without problems.
I had the bad idea to relock the bootloader due to security reasons (fastboot oem lock).
Now the device is not booting anymore, i can just see the Mi-Logo flashing very shortly.
I can access fastboot, but can't boot into recovery.
I tried to unlock the device again, but the Mi Unlocker fails and prompts me to go to the developer options in Miui, which is clearly impossible.
Any chance to proceed from fastboot (fastboot oem unlock does not work...) ?
Thanks, Jan
Click to expand...
Click to collapse
Flash stock recovery for your device via fastboot, then you should be able to boot into recovery or flash a stock system.img or your full stock firmware for your device, then unlock the bootloader(fastboot oem unlock) then flash TWRP and LineageOS again.

Droidriven said:
Flash stock recovery for your device via fastboot, then you should be able to boot into recovery or flash a stock system.img or your full stock firmware for your device, then unlock the bootloader(fastboot oem unlock) then flash TWRP and LineageOS again.
Click to expand...
Click to collapse
But he mentioned, bootloader fails to unlock. Actually it's hard brick(Even though he can boot into fastboot,the bootloader is locked. So nothing to do with fastboot).Without unlocked bootloader, flashing something from fastboot will hard brick his device completely (Will not be able to boot into fastboot). Or flashing will be denied

Tawsif999 said:
Try this to solve the issue.
If it doesn’t help, read this to boot properly into edl
Click to expand...
Click to collapse
OK, next level reached. The phone is connected to the com-port and the correct driver is displayed.
The whole procedure is a bit unstable, i need to connect the phone several times, to get a stable EDL mode.
The Xiaomi Flasher recognizes the phone, but flashing does not succeed. Sometimes it's not able to receive a kind of Hello message, sometimes it displays "object reference not set to an instance of an object".
I also downloaded the QPST flasher, but have no plan, how to use it.
I'll keep on trying!
Thanks to all, who helped me to reach this point!

jever2k said:
OK, next level reached. The phone is connected to the com-port and the correct driver is displayed.
The whole prcedure is a bit unstable, i need to connect the phone several times, to get a stable EDL mode.
The Xiaomi Flasher recognizes the phone, but flashing does not succeed. Sometimes it's not able to receive a kind of Hello message, sometimes it displays "object reference not set to an instance of an object".
I also downloaded the QPST flasher, but have no plan, how to use it.
I'll keep on trying!
Thanks to all, who helped me to reach this point!
Click to expand...
Click to collapse
I found something new by watching this video. Maybe you don't understand hindi(India is our relative country, so I do).
Lemme explain,
This guy's xiaomi k20 pro phone hard bricked with a locked bootloader. He tried a lot to repair it(by deep flash or something idk). But everything failed. At last he came to this step of EDL mode. But xiaomi Edl mode flash requires an "AUTHORIZED MI ACCOUNT" . Xiaomi people pay to get authorized account license that normal users don't have. So the guy contacted with them on a telegram page called "Mod Edit: Name Removed" . They told him that they will repair his phone via teamviewer. All he had to do is pay some $ & connect phone in edl mode. Rest of the things were done by them. And his phone repaired successfully! (Watch the video from 4:00)
So In his video, he is telling to go to that page & contact with "Mod Edit: Name Removed" there. They take 20-25$ (depends on device). If you tell them you're from Mod Edit: Name Removed's video, they will give some discount

Tawsif999 said:
But he mentioned, bootloader fails to unlock. Actually it's hard brick(Even though he can boot into fastboot,the bootloader is locked. So nothing to do with fastboot).Without unlocked bootloader, flashing psomething from fastboot will hard brick his device completely (Will not be able to boot into fastboot). Or flashing will be denied
Click to expand...
Click to collapse
Yeah, I jumped the gun and posted before seeing all the replies in the thread describing their whole scenario, should've known better.
They obviously need a hardware approach, i.e. JTAG/RIFF/Octoplus or replace motherboard.

Tawsif999 said:
I found something new by watching this video. Maybe you don't understand hindi(India is our relative country, so I do).
Lemme explain,
This guy's xiaomi k20 pro phone hard bricked with a locked bootloader. He tried a lot to repair it(by deep flash or something idk). But everything failed. At last he came to this step of EDL mode. But xiaomi Edl mode flash requires an "AUTHORIZED MI ACCOUNT" . Xiaomi people pay to get authorized account license that normal users don't have. So the guy contacted with them on a telegram page called "Mod Edit: Name Removed" . They told him that they will repair his phone via teamviewer. All he had to do is pay some $ & connect phone in edl mode. Rest of the things were done by them. And his phone repaired successfully! (Watch the video from 4:00)
So In his video, he is telling to go to that page & contact with "Mod Edit: Name Removed" there. They take 20-25$ (depends on device). If you tell them you're from Mod Edit: Name Removed's video, they will give some discount
Click to expand...
Click to collapse
Thanks for research!
Meanwhile, i stopped using Windows due to all the caveats and switched to reliable Debian Linux on a different machine.
Again it takes 10 attempts to get into EDL Mode.
I used qdl (Qualcomm downloader for Linux) with all the firehose, raw and patch .xmls
Code:
sudo ./qdl --debug --storage ufs --include . prog_ufs_firehose_8996_ddr.elf partition.xml rawprogram0.xml rawprogram1.xml rawprogram2.xml rawprogram3.xml rawprogram4.xml rawprogram5.xml patch0.xml patch1.xml patch2.xml patch3.xml patch4.xml patch5.xml
Output looked like some stuff was written, at the end i receive:
Code:
qdl: failed to write: Connection timed out
However, the phone is now dead as can be without fastboot working any more.
Maybe i'll give it another try, or get a used Mainboard...
Best regards, Jan

jever2k said:
Thanks for research!
Meanwhile, i stopped using Windows due to all the caveats and switched to reliable Debian Linux on a different machine.
Again it takes 10 attempts to get into EDL Mode.
I used qdl (Qualcomm downloader for Linux) with all the firehose, raw and patch .xmls
Code:
sudo ./qdl --debug --storage ufs --include . prog_ufs_firehose_8996_ddr.elf partition.xml rawprogram0.xml rawprogram1.xml rawprogram2.xml rawprogram3.xml rawprogram4.xml rawprogram5.xml patch0.xml patch1.xml patch2.xml patch3.xml patch4.xml patch5.xml
Output looked like some stuff was written, at the end i receive:
Code:
qdl: failed to write: Connection timed out
However, the phone is now dead as can be without fastboot working any more.
Maybe i'll give it another try, or get a used Mainboard...
Best regards, Jan
Click to expand...
Click to collapse
jever2k said:
Thanks for research!
Meanwhile, i stopped using Windows due to all the caveats and switched to reliable Debian Linux on a different machine.
Again it takes 10 attempts to get into EDL Mode.
I used qdl (Qualcomm downloader for Linux) with all the firehose, raw and patch .xmls
Code:
sudo ./qdl --debug --storage ufs --include . prog_ufs_firehose_8996_ddr.elf partition.xml rawprogram0.xml rawprogram1.xml rawprogram2.xml rawprogram3.xml rawprogram4.xml rawprogram5.xml patch0.xml patch1.xml patch2.xml patch3.xml patch4.xml patch5.xml
Output looked like some stuff was written, at the end i receive:
Code:
qdl: failed to write: Connection timed out
However, the phone is now dead as can be without fastboot working any more.
Maybe i'll give it another try, or get a used Mainboard...
Best regards, Jan
Click to expand...
Click to collapse
That's expensive. Anyway, it will be better if you don’t waste time on this. Just go for 3rd party help(From that official telegram channel or service centre). That will cost less

Tawsif999 said:
That's expensive. Anyway, it will be better if you don’t waste time on this. Just go for 3rd party help(From that official telegram channel or service centre). That will cost less
Click to expand...
Click to collapse
Thanks Tawsif for the good hints and links.
I don't really depend on the phone, so i will keep trying.
It's not wasted time, it's mainly learning new stuff and improving skills.
I believe, i'm not too far away and if it works, it's the best satisfaction.
If not, i bricked an old Mi 5.
All the best,
Jan

Bricked My phone, cant get into FastbootD to fix it

So i recently wanted to root my OOS 12 oneplus nord, and i bricked it..
i cant get into fastbootD, Recovery, or anything at all except fastboot, the device is detected as Android bootloader interface in device manager, i have tried using: msm tool, flashing normal rom (error: partition not found and Flashing is not allowed for critical partition)

As a last resort, this worked for me : [OPNORD][OOS AC01AA/BA/DA] Unbrick tool to restore your device to OxygenOS

Azeld said:
As a last resort, this worked for me : [OPNORD][OOS AC01AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Click to expand...
Click to collapse
As I said, msm didn’t work for me

Hafted said:
As I said, msm didn’t work for me
Click to expand...
Click to collapse
may be need to reinstall drivers? should be displayed differently in the device manager than Android bootloader interface.

gorro8 said:
may be need to reinstall drivers?
Click to expand...
Click to collapse
Nope, I can’t get it into edl mode, I did manage once but I got the you need to restart error and I couldn’t get it back there

Hafted said:
Nope, I can’t get it into edl mode, I did manage once but I got the you need to restart error and I couldn’t get it back there
Click to expand...
Click to collapse
what do you do to enter the edl mode?
what cable are you using?

gorro8 said:
what do you do to enter the edl mode?
what cable are you using?
Click to expand...
Click to collapse
Using official one plus cable, I hold bot volume keys for about 40 seconds, then connect the cable and only then I let my hands go off the keys

I found a problem similar to yours. they say it's the wrong driver
[Bricked] OP8 : FASTBOOT rom : 'Flashing is not allowed for Critical Partitions
I messed up trying to install TWRP on c.17 OOS12 Now the mobile is bricked. 1. I tried the MSM tool, it shows the COM PORT but doesnt do anything. Just stuck at waiting for device. 2. I tried the ALL IN ON TOOL, but getting "UNHANDLED...
forum.xda-developers.com

download the correct drivers and replace them in the device manager

gorro8 said:
I found a problem similar to yours. they say it's the wrong driver
[Bricked] OP8 : FASTBOOT rom : 'Flashing is not allowed for Critical Partitions
I messed up trying to install TWRP on c.17 OOS12 Now the mobile is bricked. 1. I tried the MSM tool, it shows the COM PORT but doesnt do anything. Just stuck at waiting for device. 2. I tried the ALL IN ON TOOL, but getting "UNHANDLED...
forum.xda-developers.com
Click to expand...
Click to collapse
Ok, I’ll try that and give you an update, Ty!

worth trying another USB port too, even if they are supposed to be the exact same. Same thing happened with my laptop, tried another (presumably identical) USB port and it works first time, every time

Hafted said:
Using official one plus cable, I hold bot volume keys for about 40 seconds, then connect the cable and only then I let my hands go off the keys
Click to expand...
Click to collapse
1st, u really should find the exact drivers. But also very important to remember booting your PC into Test Mode with Driver Signature Enforcement OFF - BEFORE installing the EDL 9008 Drivers for your device.
Besides, after you press and hold both Vol buttons, u should plug the device in IMMEDIATELY, not waiting for 40 seconds, since each time the device boots into EDL mode, if there's no connection is established in 5 seconds , the device will automatically out of EDL mode.

Hey, so after some time (I got a new phone by now) I managed to fix it, turns out that i had to instantly put in the cable, just like how LinhBT Said
LinhBT said:
waiting for 40 seconds, since each time the device boots into EDL mode, if there's no connection is established in 5 seconds , the device will automatically out of EDL mode.
Click to expand...
Click to collapse

Here is something that might work for unbricking and/or getting in to EDL-mode:
Unable to reinstall Oxygen OS from custom ROM. FAILED (remote: Flashing is not allowed for Critical Partitions ). Need assistance, details below.
Hello, friends. So I am here following this exact tutorial : https://www.thecustomdroid.com/oneplus-nord-oxygenos-restoration-guide/ I currently am stuck there @pop-os:~/Desktop/platform-tools_r31.0.2-linux/platform-tools/Partition-image$...
forum.xda-developers.com

Question [HELP!] Needing to flash OP9 back to stock, but I have some issues...

Trying to flash my friend's phone back to stock but having some issues, you might have seen twixyfig's post in the OnePlus 9 Pro threads, but it's a regular OP9 and not the Pro.
Anyways, I have been trying to flash to working condition but MSM won't help. It keeps saying "No valid trg ID" and "Param preload" for a while now. This happened because we tried to root the phone but failed. The bootloader is unlocked, and fastboot works too.
TIA.

Whenever you post asking for help, always make sure to add as many details as possible. Your phone model, variant, current firmware, the tool you are using, the tools you used before, the steps you took before you started facing issues, every detail you can possibly tell. Only then someone might be able to help.

shadabkiani said:
Whenever you post asking for help, always make sure to add as many details as possible. Your phone model, variant, current firmware, the tool you are using, the tools you used before, the steps you took before you started facing issues, every detail you can possibly tell. Only then someone might be able to help.
Click to expand...
Click to collapse
So its a oneplus 9 (Chinese model), before it got bricked it was on android 12, we tried MSM V5.1.89 and CMD, cmd said " No boot.img found "

twixyfig said:
So its a oneplus 9 (Chinese model), before it got bricked it was on android 12, we tried MSM V5.1.89 and CMD, cmd said " No boot.img found "
Click to expand...
Click to collapse
Download the MSM Tool (Global) from this link. Global works on Chinese variant (LE2110) too. Have proper drivers OnePlus drivers installed. Turn off your phone and set it aside, do not connect to PC yet. Run the MSM Tool exe file. Once its loaded, click Start and it should wait for device. Now on your phone, hold vol+ and vol- buttons (no power button), and connect the cable to phone. This will make the phone enter EDL mode. The PC would recognize the device (USB plugged in sound) but phone screen would still be black. On MSM, the flashing would start and would be done in about 4-5 mins. Good luck.

shadabkiani said:
Download the MSM Tool (Global) from this link. Global works on Chinese variant (LE2110) too. Have proper drivers OnePlus drivers installed. Turn off your phone and set it aside, do not connect to PC yet. Run the MSM Tool exe file. Once its loaded, click Start and it should wait for device. Now on your phone, hold vol+ and vol- buttons (no power button), and connect the cable to phone. This will make the phone enter EDL mode. The PC would recognize the device (USB plugged in sound) but phone screen would still be black. On MSM, the flashing would start and would be done in about 4-5 mins. Good luck.
Click to expand...
Click to collapse
Thanks! Im gonna try this today and give you an update when something happens

twixyfig said:
Thanks! Im gonna try this today and give you an update when something happens
Click to expand...
Click to collapse
I think you were trying Indian MSM Tool. That might be the problem.
When your open MSM Tool, choose Others as login.

Write me in dm and I will help you, I think I can solve your problem

you can download OP9PRO India MSM tool(OnePlus_9_Pro_India_OxygenOS_11.2.4.4) and
1.unzip OP9Pro India ROM and download to your phone(select the firhose chebox)
2.if you success to download it,your phone will restart to the OOS.
3.Login your Google account and unlock OEM,then reboot your phone
4. install "Oxygen Updater", VERSION 5.7.3，you can find it on github.
5.download OOS for OP9 , archive name is "1797d47ddef0fca1411fb006b9c7a1a7ba33d818.zip"
6.enter the oxygen updater,and flash "1797d47ddef0fca1411fb006b9c7a1a7ba33d818.zip" to your phone
7.reboot and fixed!
PS: my english is so suck,try to read it!
good luck!