Related
Hi,
i flash ROM and after first run phone boot on HTC logo, after that it restart and go to recovery. I try restore backup without effect.
HTBOOT-2.00.0002
bootloader unlocked via htdev
euromen said:
Hi,
i flash ROM and after first run phone boot on HTC logo, after that it restart and go to recovery. I try restore backup without effect.
HTBOOT-2.00.0002
bootloader unlocked via htdev
Click to expand...
Click to collapse
Have you flashed boot.img from that rom?
Probably that's the problem ,if you're htc dev unlocked than you'r S-ON and you need to flash the boot image .Unzip the rom you have flashed and find the boot.img and flash it .
oh thats my problem, I have a habit from desire, only copy and install ROM. Thanks
After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.
ttakacs said:
After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.
Click to expand...
Click to collapse
When you flashed to stock you erased your recovery.. Reconnect to your computer and push a recovery onto your phone and you're good to go..
Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."
ttakacs said:
Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."
Click to expand...
Click to collapse
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.
Setting.Out said:
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.
Click to expand...
Click to collapse
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?
ttakacs said:
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?
Click to expand...
Click to collapse
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium
Setting.Out said:
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.
ttakacs said:
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.
Click to expand...
Click to collapse
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.
Setting.Out said:
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.
Click to expand...
Click to collapse
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?
ttakacs said:
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?
Click to expand...
Click to collapse
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Sent from my Nexus S using xda premium
Setting.Out said:
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Click to expand...
Click to collapse
I am too. Every method known to me (Odin, fastboot, adb) to flash a ROM, whether custom or stock, has failed to boot. Thanks for hanging with me on this; if you can think of solution I'll be glad to have it. Or if I solve it, I'll post here.
Okay so I tried to flash cyanogenmod 11 for the first time on this moto G (US). It bootlooped and I tired to reflash it again and it did the same. There was no way of returning to stock because I had not made a backup. So I tried to flash stock in the bootloader and that didn't work. I went into the recovery and it said 'cant mount /sdcard. So go back into the bootloader and format the sdcard and that doesn't work (which I returned to the recovery to see it not working). I go back and flash twrp thinking that recovery would have something to help me flash a new rom and now I don't even have a working recovery. It takes me straight back to the bootloader and every time I flash a recovery it says Mismatched partition size (recovery) and I am unable to boot into it.
I have no clue on what to do at this point and I need help.
also it says invalid "boot image header!" in red letters
http://forum.xda-developers.com/showthread.php?t=2542219
Install full factory image with fastboot.
P.Kosunen said:
http://forum.xda-developers.com/showthread.php?t=2542219
Install full factory image with fastboot.
Click to expand...
Click to collapse
Alright thankyou!
I got everything to work again but I still can't flash roms. They just bootloop :S
It could be too big recovery install with fastboot causes problem, every recovery cwm/twrp i tried to install with fastboot fails.
http://forum.xda-developers.com/showpost.php?p=49559872&postcount=234
Twrp_MotoG_signed_010814_163615.zip
Download vocoderisms TWRP build, extract "recovery.img" from it.
After you have kitkat installed and working:
Option 1, use TWRP without install:
Boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img) and install rom from there.
Option 2, install TWRP (have not tested):
Upload twrp zip to phone (adb push Twrp_MotoG_signed_010814_163615.zip /sdcard/), boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img), install Twrp_MotoG_signed_010814_163615.zip.
Misterowl said:
Okay so I tried to flash cyanogenmod 11 for the first time on this moto G (US). It bootlooped and I tired to reflash it again and it did the same. There was no way of returning to stock because I had not made a backup. So I tried to flash stock in the bootloader and that didn't work. I went into the recovery and it said 'cant mount /sdcard. So go back into the bootloader and format the sdcard and that doesn't work (which I returned to the recovery to see it not working). I go back and flash twrp thinking that recovery would have something to help me flash a new rom and now I don't even have a working recovery. It takes me straight back to the bootloader and every time I flash a recovery it says Mismatched partition size (recovery) and I am unable to boot into it.
I have no clue on what to do at this point and I need help.
Click to expand...
Click to collapse
https://docs.google.com/file/d/0B2LP8tI1Xwu4MGtPTlpVcVQxN0k/preview this cwm worked for me
You do know flashing stock again removes root, so it has to be rerooted again ?
aradalien said:
You do know flashing stock again removes root, so it has to be rerooted again ?
Click to expand...
Click to collapse
Yes I am very aware and followed through with root with that outcome.
kieranc88 said:
https://docs.google.com/file/d/0B2LP8tI1Xwu4MGtPTlpVcVQxN0k/preview this cwm worked for me
Click to expand...
Click to collapse
CWM doesn't work it. It boots up (Im used cyanogenmod) the cyanogenmod boot animation but just stays there.
P.Kosunen said:
It could be too big recovery install with fastboot causes problem, every recovery cwm/twrp i tried to install with fastboot fails.
http://forum.xda-developers.com/showpost.php?p=49559872&postcount=234
Twrp_MotoG_signed_010814_163615.zip
Download vocoderisms TWRP build, extract "recovery.img" from it.
After you have kitkat installed and working:
Option 1, use TWRP without install:
Boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img) and install rom from there.
Option 2, install TWRP (have not tested):
Upload twrp zip to phone (adb push Twrp_MotoG_signed_010814_163615.zip /sdcard/), boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img), install Twrp_MotoG_signed_010814_163615.zip.
Click to expand...
Click to collapse
I've flashed twrp too and came out with the same outcome.
stuck in fastboot
Misterowl said:
Okay so I tried to flash cyanogenmod 11 for the first time on this moto G (US). It bootlooped and I tired to reflash it again and it did the same. There was no way of returning to stock because I had not made a backup. So I tried to flash stock in the bootloader and that didn't work. I went into the recovery and it said 'cant mount /sdcard. So go back into the bootloader and format the sdcard and that doesn't work (which I returned to the recovery to see it not working). I go back and flash twrp thinking that recovery would have something to help me flash a new rom and now I don't even have a working recovery. It takes me straight back to the bootloader and every time I flash a recovery it says Mismatched partition size (recovery) and I am unable to boot into it.
I have no clue on what to do at this point and I need help.
Click to expand...
Click to collapse
Exactly i am also facing same problem....
mobile unable to instal firmware...
still i am searching for solution ...
guys plz help me
I thought I am the only one with this problem..After mailing the phone to SC and got it back after 2 months, the phone still looks the same, just like they did nothing to fix it.
I bought this phone so I can get access to a lot of different roms... I'm trying to install twrp as my recovery or cmw but when I flash it after unlocking the boot loader with cmw it doesn't stay installed and revert back to the original request and the twrp I get an error message in twrp about original recovery and then the phone goes into a boot loop. It has the latest OS version running with April Security fixes... please help
Flash twrp as it is a more versatile and widely supported recovery.
Flash twrp in fastboot mode. After flashing, use the power and volume buttons to boot directly to twrp, do not reboot the phone until after you have entered recovery.
audit13 said:
Flash twrp as it is a more versatile and widely supported recovery.
Flash twrp in fastboot mode. After flashing, use the power and volume buttons to boot directly to twrp, do not reboot the phone until after you have entered recovery.
Click to expand...
Click to collapse
did exactly what you said and im getting thr error / system to prevent the stock rom from replacing twrp...
whats happening
I recommend flashing the latest stock rom to make sure the phone boots properly.Then, I would flash twrp again.
audit13 said:
I recommend flashing the latest stock rom to make sure the phone boots properly.Then, I would flash twrp again.
Click to expand...
Click to collapse
Did that and flashed twrp and I'm still getting the error...
I unlocked boot loader
Flashed twrp
With USB still plugged in I selected recovery from the fastboot menu...
Boots to recovery and still get that error message
Am I doing something wrong
You're flashing 2.8.7 for the hammerhead?
audit13 said:
You're flashing 2.8.7 for the hammerhead?
Click to expand...
Click to collapse
No I'm flashing the latest 3.0.2 version is that the problem?
I would try 2.8.7
Alright, so its without wasting time of people here, I'd just state the summary in points.
I flashed stock rom a.17 - I had custom roms before, I got fed up with them changing every 2 months.
Then everything worked fine until I flashed the boot.img from vishal_android_freak to get recovery.
I got the twrp recovery 2.7.0.0.
I flashed AOSP 6.0.1 through it, it was done very well but the rom stuck on boot animation for more then 30 mins.
I pulled the battery out - now I had TWRP 2.8.4.0
I tried flashing the rom again, it gave /data error.
I flashed stock rom, rooted then tried other methods of getting recovery, I failed everytime (Tried from TWRP app, su dd command, Recovery installer app )
Then I found a CWM boot.img to flash through fastboot.
I did and got CWM.
I flashed AOSP again from it, it stuck on boot animation again.
Then again I flashed stock rom and repeated the process.
This time with CWM, I flashed Stryflex LP Ultimate
It also stuck on boot animations.
Any idea why this happens? How to fix this ****?
Summary: Only stock rom works, not any other rom.
Observer000 said:
Alright, so its without wasting time of people here, I'd just state the summary in points.
I flashed stock rom a.17 - I had custom roms before, I got fed up with them changing every 2 months.
Then everything worked fine until I flashed the boot.img from vishal_android_freak to get recovery.
I got the twrp recovery 2.7.0.0.
I flashed AOSP 6.0.1 through it, it was done very well but the rom stuck on boot animation for more then 30 mins.
I pulled the battery out - now I had TWRP 2.8.4.0
I tried flashing the rom again, it gave /data error.
I flashed stock rom, rooted then tried other methods of getting recovery, I failed everytime (Tried from TWRP app, su dd command, Recovery installer app )
Then I found a CWM boot.img to flash through fastboot.
I did and got CWM.
I flashed AOSP again from it, it stuck on boot animation again.
Then again I flashed stock rom and repeated the process.
This time with CWM, I flashed Stryflex LP Ultimate
It also stuck on boot animations.
Any idea why this happens? How to fix this ****?
Summary: Only stock rom works, not any other rom.
Click to expand...
Click to collapse
I think, that means bootloader is unlocked again! Recheck bootloader state and always use latest TWRP recovery (v3.0.2 for us).
You can download Xperia L recovery from twrp website and then use your current v2.8.4 one to install that. Or just simply use adb & fastboot in your PC and enter this command:
Code:
fastboot flash boot [I]your recovery image name.img[/I]
. And then flash your desired ROM
Kungfu73 said:
I think, that means bootloader is unlocked again! Recheck bootloader state and always use latest TWRP recovery (v3.0.2 for us).
You can download Xperia L recovery from twrp website and then use your current v2.8.4 one to install that. Or just simply use adb & fastboot in your PC and enter this command:
Code:
fastboot flash boot [I]your recovery image name.img[/I]
. And then flash your desired ROM
Click to expand...
Click to collapse
Alright, I check bootloader state, it says bootloader unlock done means it's unlocked.
I am going to flash twrp 3.0.2 and will update you soon!
Kungfu73 said:
I think, that means bootloader is unlocked again! Recheck bootloader state and always use latest TWRP recovery (v3.0.2 for us).
You can download Xperia L recovery from twrp website and then use your current v2.8.4 one to install that. Or just simply use adb & fastboot in your PC and enter this command:
Code:
fastboot flash boot [I]your recovery image name.img[/I]
. And then flash your desired ROM
Click to expand...
Click to collapse
Oh Man, you saved my day! nothing worked but the damnit twrp 3.0.2
For anyone else referring here:
I get hell lot of graphical glitches when I flashed twrp 3.0.2, I just made it to factory reset and click install button although my screen was glitched and I cant even look at it.
JUST IGNORE THE GLITCHES! I wiped dalvik cache after flashing AOSP-RRO, now I'm flashing Lineage OS, thanks a lot! Button pressed.
Observer000 said:
Oh Man, you saved my day! nothing worked but the damnit twrp 3.0.2
For anyone else referring here:
I get hell lot of graphical glitches when I flashed twrp 3.0.2, I just made it to factory reset and click install button although my screen was glitched and I cant even look at it.
JUST IGNORE THE GLITCHES! I wiped dalvik cache after flashing AOSP-RRO, now I'm flashing Lineage OS, thanks a lot! Button pressed.
Click to expand...
Click to collapse
Did TWRP 3.0.2 ultimately work with this?
If worked, I am also curious to know how much space is left there for apps in device memory, since the ROM seems to be Marshmallow based.