Hi
I'm looking for Easy Tutorial/Guide Convert OnePlus 8
TMobile to LineageOS .
BEST REGARDS
You'll need to unlock your bootloader first, heres a guide for that
Guide to install Lineage
FoxyDrew said:
You'll need to unlock your bootloader first, heres a guide for that
Guide to install Lineage
Click to expand...
Click to collapse
Thanks For Your Help.
Now the question is How to install Magisk On LineageOS ?
If you find the information please post it here, so others can benefit. Thanks.
alaminus said:
Thanks For Your Help.
Now the question is How to install Magisk On LineageOS ?
Click to expand...
Click to collapse
download magisk.apk, rename it to magisk.zip, go into lineage recovery, adb sideload magisk.zip and thats it.
Related
Hey, everyone,
I just bought a new Mate 9 Lite [BLL-L23] and would like some help with how to make it my own. I am familiar with other devices - but, not the BLL-L23.
I am very appreciative, my friends! Here's what I'd like to know:
1. Does anyone know when we'll get Android Oreo (or, at the least, Android Nougat)?
-- I am currently running 6.0; EMUI 4.1.
2. Is there an official support forum for the BLL-L23?
3. Does anyone know how to root the BLL-L23 using Magisk or Chainfire (which is better)?
4. Is there a recent TWRP recovery available?
5. What else should I do to take full advantage of my device?
THANK YOU VERY MUCH FOR EVERYTHING, EVERYONE!
vince.lupe said:
Hey, everyone,
I just bought a new Mate 9 Lite [BLL-L23] and would like some help with how to make it my own. I am familiar with other devices - but, not the BLL-L23.
I am very appreciative, my friends! Here's what I'd like to know:
1. Does anyone know when we'll get Android Oreo (or, at the least, Android Nougat)?
-- I am currently running 6.0; EMUI 4.1.
2. Is there an official support forum for the BLL-L23?
3. Does anyone know how to root the BLL-L23 using Magisk or Chainfire (which is better)?
4. Is there a recent TWRP recovery available?
5. What else should I do to take full advantage of my device?
THANK YOU VERY MUCH FOR EVERYTHING, EVERYONE!
Click to expand...
Click to collapse
1- I don't know (it's up to huawei)
2- no, for now
3- I didn't find (after searching)
4- again, nothing yet.
5- customize it as you like.
That's all I can tell you
PalakMi said:
1- I don't know (it's up to huawei)
2- no, for now
3- I didn't find (after searching)
4- again, nothing yet.
5- customize it as you like.
That's all I can tell you
Click to expand...
Click to collapse
Thank you very much ? What about the application "Firmware Finder?" Do you know anything about it and how to use it?
vince.lupe said:
Thank you very much ? What about the application "Firmware Finder?" Do you know anything about it and how to use it?
Click to expand...
Click to collapse
All I know is you use it to download a firmware or OTA and flash it with dload method
PalakMi said:
All I know is you use it to download a firmware or OTA and flash it with dload method
Click to expand...
Click to collapse
I am currently downloading the latest full firmware, and I know it's not a problem to install it - but, when I check the Firmware Status, it says that the firmware is not approved for installation. Is there still a way to install it? What does this mean? Thank you very much, PalakMi ?
vince.lupe said:
I am currently downloading the latest full firmware, and I know it's not a problem to install it - but, when I check the Firmware Status, it says that the firmware is not approved for installation. Is there still a way to install it? What does this mean? Thank you very much, PalakMi ?
Click to expand...
Click to collapse
Updates got more complicated, so I can't help with that
PalakMi said:
Updates got more complicated, so I can't help with that
Click to expand...
Click to collapse
Okay, thank you.
No problem
Mate 9 Lite is a rebranded H6x, OpenKirin's TWRP works fine. You can also use Firmware Finder for updating. Magisk works fine too. I think all Custom ROMs on this forum should work. I'm planning to flash RROS but I'm waiting for some bugfixes.
The only thing I suggest you is, if you want to update your Stock ROM, you MUST flash the right ROM for your device.
Panchoso4D said:
Mate 9 Lite is a rebranded H6x, OpenKirin's TWRP works fine. You can also use Firmware Finder for updating. Magisk works fine too. I think all Custom ROMs on this forum should work. I'm planning to flash RROS but I'm waiting for some bugfixes.
The only thing I suggest you is, if you want to update your Stock ROM, you MUST flash the right ROM for your device.
Click to expand...
Click to collapse
But, what happens if it says in firmware finder that the firmware is not authorized for installation?
vince.lupe said:
But, what happens if it says in firmware finder that the firmware is not authorized for installation?
Click to expand...
Click to collapse
Your build number is BLL-L23C605 (Latin America)?
RedSkull23 said:
Your build number is BLL-L23C605 (Latin America)?
Click to expand...
Click to collapse
Yes, my friend
vince.lupe said:
Yes, my friend
Click to expand...
Click to collapse
I wanted to provide you a link for an EMUI 5 update package by Emui official site but they have stopped support on uodates via packages on SD!! I'll look for it on other sites...
vince.lupe said:
But, what happens if it says in firmware finder that the firmware is not authorized for installation?
Click to expand...
Click to collapse
FF update may not work all the time. But for twrp, check and you should get the openkirin twrp from 6X thread working.
shashank1320 said:
FF update may not work all the time. But for twrp, check and you should get the openkirin twrp from 6X thread working.
Click to expand...
Click to collapse
My friend, could you please provide a link? I'd be gratefully appreciative ? That TWRP will indeed work with the Mate 9 Lite [BLL-L23] to flash unauthorized software?
vince.lupe said:
My friend, could you please provide a link? I'd be gratefully appreciative ? That TWRP will indeed work with the Mate 9 Lite [BLL-L23] to flash unauthorized software?
Click to expand...
Click to collapse
Yes it will work.
https://forum.xda-developers.com/honor-6x/development/twrp-t3583413
shashank1320 said:
Yes it will work.
https://forum.xda-developers.com/honor-6x/development/twrp-t3583413
Click to expand...
Click to collapse
AWESOMEZ bro, you're the man ? Thank you!!!
vince.lupe said:
AWESOMEZ bro, you're the man ? Thank you!!!
Click to expand...
Click to collapse
If it doesn't work then have stock recovery handy. Good luck buddy
shashank1320 said:
If it doesn't work then have stock recovery handy. Good luck buddy
Click to expand...
Click to collapse
Okay, does stock recovery have to be modified? I don't have a modified stock recovery for my BLL-L23
vince.lupe said:
Okay, does stock recovery have to be modified? I don't have a modified stock recovery for my BLL-L23
Click to expand...
Click to collapse
Not modified but pure stock.
Hello everyone. Sorry, I'm a noob so please be patient with me. My RN7P is rooted with Magisk, has Peter's TWRP and EdXposed. I have MIUI_V10.3.13.0.PFHINXM. How do I update to MIUI 11? Do i just download the Indian ROM (from here: https://www.xda-developers.com/download-miui-11-xiaomi-redmi-note-7-pro-poco-f1/amp/), and install it through TWRP, or do I also need to do something else, do I have to make sure that something is right? I just want to make sure that I don't break my device.
So, I just received the update from the updater app and I wanted to know, can I just download the package from there and flash it through TWRP?
New User... Maybe said:
Hello everyone. Sorry, I'm a noob so please be patient with me. My RN7P is rooted with Magisk, has Peter's TWRP and EdXposed. I have MIUI_V10.3.13.0.PFHINXM. How do I update to MIUI 11? Do i just download the Indian ROM (from here: https://www.xda-developers.com/download-miui-11-xiaomi-redmi-note-7-pro-poco-f1/amp/), and install it through TWRP, or do I also need to do something else, do I have to make sure that something is right? I just want to make sure that I don't break my device.
Click to expand...
Click to collapse
Just flash this using peter twrp. Dont need to wipe anything .
https://forum.xda-developers.com/redmi-note-7-pro/how-to/rom-miui-11-xiaomi-eu-t3980851
Sent from my Redmi Note 7 Pro using XDA Labs
Just got Google version P3 and it's on November Android 10. Unlocked bootloader, but seemingly no can do on TWRP? If yes, how? If no, can I downgrade to 9.0? Pros and cons?
Thanks in advance!
amajamar said:
Just got Google version P3 and it's on November Android 10. Unlocked bootloader, but seemingly no can do on TWRP? If yes, how? If no, can I downgrade to 9.0? Pros and cons?
Thanks in advance!
Click to expand...
Click to collapse
You can root on Android 10, just not with twrp as it doesn't work on 10. You'll need to patch a boot.img with magisk on your device and then flash that with fastboot from your pc. There are guides for this.
Thanks for that! I just downgraded to 9.0 and rooted while I was waiting, but any real good reasons to use 10?
Semi rom noob so apologies in advance.
I installed the stagOS Android 12 rom and while it's very good I want to go back to stock oos11. Can anyone point me in the right direction to a guide for going back to stock?
I had to use lineage os recovery lemonade to flash stagOS. Since I already have this recovery can I use this to flash stock oos11? Thanks.
Thread '[FASTBOOT] [ROM] [PC REQUIRED] [OP9] Stock OOS 11.2.2.2AA' https://forum.xda-developers.com/t/fastboot-rom-pc-required-op9-stock-oos-11-2-2-2aa.4275727/
mattie_49 said:
Thread '[FASTBOOT] [ROM] [PC REQUIRED] [OP9] Stock OOS 11.2.2.2AA' https://forum.xda-developers.com/t/fastboot-rom-pc-required-op9-stock-oos-11-2-2-2aa.4275727/
Click to expand...
Click to collapse
Unfortunately this hard bricked my device
lukebukowiec said:
Unfortunately this hard bricked my device
Click to expand...
Click to collapse
You were asking if there was a fastboot rom for op9. Sorry thought it would help. Never hard bricked if you can reach edl or fastboot!!
mattie_49 said:
You were asking if there was a fastboot rom for op9. Sorry thought it would help. Never hard bricked if you can reach edl or fastboot!!
Click to expand...
Click to collapse
No worries man I barely know what I'm doing. I just posted another thread, I can't get EDL to work even. i really f'd up here
Hello everyone, I have a problem with my Xiaoxin Pad Plus (TB-J607F).
When I bought it in a China store, it had a pseudo Global Rom on it. I then flashed the China Rom and everything worked fine. Also got some OTA update.
Then I got the stupid idea to try another Rom (P11 5G via LMSA) and now I can't get back to the China Rom. I guess something is preventing a downgrade because I did the OTA update.
As I remember it was the ZUI 13.1.???.
But I only have this ROM :TB-J607F_CN_WIFI_USER_Q00010.0_R_ZUI_12.6.142_ST_210801_qpst-001.7z
I would very much like to go back to the China ROM and maybe there is a way.
Thanks for your help.
You must unlock bootloader to flash back to China ROM as Global ROM is much more newer than China ROM. If you want to relock, you need to wait Lenovo release ZUI14 on September.
thanks for your reply.
yes indeed, the bootloader is locked.
I need an unlock file which I can only get from Lenovo. ( please correct me if i am wrong)
I requested this from Lenovo a few days ago but so far no response.
https://www.zui.com/iunlock
I may have to be patient.
gfellow said:
thanks for your reply.
yes indeed, the bootloader is locked.
I need an unlock file which I can only get from Lenovo. ( please correct me if i am wrong)
I requested this from Lenovo a few days ago but so far no response.
https://www.zui.com/iunlock
I may have to be patient.
Click to expand...
Click to collapse
In fact if you are in Global ROM now, you don't need to request for unlock file. Just enable oem unlock in Developer Settings, reboot to bootloader and run
Code:
fastboot flashing unlock
Only Chinese Firmware need unlock file.
Thanks for the explanation
I still have a few questions.
1. can I lock the bootloader again after the China Rom flashed and downloaded the OTA update?
2. with which command I lock the bootloader again?
Thanks in advance
gfellow said:
Thanks for the explanation
I still have a few questions.
1. can I lock the bootloader again after the China Rom flashed and downloaded the OTA update?
2. with which command I lock the bootloader again?
Thanks in advancei want an answer of this too. Can anyone pls help?
Click to expand...
Click to collapse
bigsaltyfishes said:
In fact if you are in Global ROM now, you don't need to request for unlock file. Just enable oem unlock in Developer Settings, reboot to bootloader and run
Code:
fastboot flashing unlock
Only Chinese Firmware need unlock file.
Click to expand...
Click to collapse
Do you have a tutorial on how to install china rom on my pad plus global rom? Thank you!
In principle, you can also use the How TO from Tropaion.
https://forum.xda-developers.com/t/install-stock-rom-xiaoxin-pad-pro-2021-tb-j716f.4347951/
Credit and Thanks:
Tropaion
Here is the Stock ROM/China ROM of the TB-J607F.
https://4pda.to/forum/index.php?showtopic=1035371&st=1600#entry112659597
Credit and Thanks:
4pda.to
gfellow said:
In principle, you can also use the How TO from Tropaion.
https://forum.xda-developers.com/t/install-stock-rom-xiaoxin-pad-pro-2021-tb-j716f.4347951/
Credit and Thanks:
Tropaion
Here is the Stock ROM/China ROM of the TB-J607F.
https://4pda.to/forum/index.php?showtopic=1035371&st=1600#entry112659597
Credit and Thanks:
4pda.to
Click to expand...
Click to collapse
Thank you!!
gfellow said:
In principle, you can also use the How TO from Tropaion.
https://forum.xda-developers.com/t/install-stock-rom-xiaoxin-pad-pro-2021-tb-j716f.4347951/
Credit and Thanks:
Tropaion
Here is the Stock ROM/China ROM of the TB-J607F.
https://4pda.to/forum/index.php?showtopic=1035371&st=1600#entry112659597
Credit and Thanks:
4pda.to
Click to expand...
Click to collapse
I installed the J607Z rom in my J607F (the one with 5G), it came with the "global" rom, then i installed this one that's a bit better but i want the rom with zui that seens to have more functions (mainly for external display that i need). Can i go with this tutorial to install the chinese rom? I didn't changed bootloader settings to install the one i'm using, also does the chinese rom have other languages other than chinese?
thanks
LucasCT said:
I installed the J607Z rom in my J607F (the one with 5G), it came with the "global" rom, then i installed this one that's a bit better but i want the rom with zui that seens to have more functions (mainly for external display that i need). Can i go with this tutorial to install the chinese rom? I didn't changed bootloader settings to install the one i'm using, also does the chinese rom have other languages other than chinese?
thanks
Click to expand...
Click to collapse
Same question here.
LucasCT said:
I installed the J607Z rom in my J607F (the one with 5G), it came with the "global" rom, then i installed this one that's a bit better but i want the rom with zui that seens to have more functions (mainly for external display that i need). Can i go with this tutorial to install the chinese rom? I didn't changed bootloader settings to install the one i'm using, also does the chinese rom have other languages other than chinese?
thanks
Click to expand...
Click to collapse
The ZUI-ROM has besides chinese also english.
The important thing is that the ROM is newer than what you have at the moment. The latest is ZUI 14, only then you can flash the ROM when the bootloader is locked. Otherwise you have to unlock the bootloader.
gfellow said:
The ZUI-ROM has besides chinese also english.
The important thing is that the ROM is newer than what you have at the moment. The latest is ZUI 14, only then you can flash the ROM when the bootloader is locked. Otherwise you have to unlock the bootloader.
Click to expand...
Click to collapse
thanks for the answer. i downloaded the chinese rom, if it takes to long for de zui 14 download link to be released then i'll consider to unlock the bootloader.
LucasCT said:
thanks for the answer. i downloaded the chinese rom, if it takes to long for de zui 14 download link to be released then i'll consider to unlock the bootloader.
Click to expand...
Click to collapse
Are you successful in flashing the Chinese Rom from global?
jash12per said:
Are you successful in flashing the Chinese Rom from global?
Click to expand...
Click to collapse
i went from global to P11 5G stock. haven't tryed going to chinese rom sinse i have to unlock bootloader. if i still was with global rom then i think it would not be necessary.
jash12per said:
Are you successful in flashing the Chinese Rom from global?
Click to expand...
Click to collapse
Yes i am, and i know how to do that, went all the way from latest 5g rom to zui 14 with locked bootloader )
L_lucio said:
Yes i am, and i know how to do that, went all the way from latest 5g rom to zui 14 with locked bootloader )
Click to expand...
Click to collapse
I want too, but I'm afraid of bricking my tab. If you can help me with a full tutorial, please help.