Hello
Im looking at upgrading the S10E to the Canadian Variant of the S20 which is SM-G781W and was wondering what my options are for bootloader unlock and root Im very tired of the Samsung bloatware and being unable to remove it
dantexaiver said:
Hello
Im looking at upgrading the S10E to the Canadian Variant of the S20 which is SM-G781W and was wondering what my options are for bootloader unlock and root Im very tired of the Samsung bloatware and being unable to remove it
Click to expand...
Click to collapse
You can debloat with no root, check this post:
https://forum.xda-developers.com/t/...sh-the-full-potential-of-your-galaxy.4376755/
dantexaiver said:
Hello
Im looking at upgrading the S10E to the Canadian Variant of the S20 which is SM-G781W and was wondering what my options are for bootloader unlock and root Im very tired of the Samsung bloatware and being unable to remove it
Click to expand...
Click to collapse
you wouldn't have bootloader unlock and therefore no root, you posted this in the wrong section BTW.
rgrapow said:
You can debloat with no root, check this post:
https://forum.xda-developers.com/t/...sh-the-full-potential-of-your-galaxy.4376755/
Click to expand...
Click to collapse
3mel said:
you wouldn't have bootloader unlock and therefore no root, you posted this in the wrong section BTW.
Click to expand...
Click to collapse
actually looking into a paid service to unlock the bootloader
dantexaiver said:
actually looking into a paid service to unlock the bootloader
Click to expand...
Click to collapse
currently one service can't unlock the newer firmwares and the other is on hiatus, maybe for the same reason.
3mel said:
currently one service can't unlock the newer firmwares and the other is on hiatus, maybe for the same reason.
Click to expand...
Click to collapse
service told me to keep an eye out for a certain version of bootloader so when the phone services im going to boot it up with out setup and see what version
I had to return my Canadian edition, locked bootloader.
I ended up having to buy the international model with OEM Unlock which Canadian does not.
K2silver said:
I had to return my Canadian edition, locked bootloader.
I ended up having to buy the international model with OEM Unlock which Canadian does
Click to expand...
Click to collapse
can i replace the motherboard of the SM-G781W with a SM-G781B one? or would i be still not able to unlock the bootloader
Hello friends,
Recently I moved to Canada, I have the international model, G781B, I was wondering if it is possible to flash the canadian variant. Reason: 5G didnt work so far, tryied everything to make it work, even manually configuration of Bell network.
Comparing at the gsmarena.com, the hardware looks like the same.
I'm almost giving up and buying a new phone.
ejpenha said:
Hello friends,
Recently I moved to Canada, I have the international model, G781B, I was wondering if it is possible to flash the canadian variant. Reason: 5G didnt work so far, tryied everything to make it work, even manually configuration of Bell network.
Comparing at the gsmarena.com, the hardware looks like the same.
I'm almost giving up and buying a new phone.
Click to expand...
Click to collapse
Most likely your carries uses mmwave 5g network, and international S20 FE 5g uses the other spectrums for 5g. There is no way a software flfash can change anyting, and I do not think that you can even flash software for thw wrong phone model, as odin check the BL version prior to flashing
Related
I use Straight Talk (AT&T sim) in the US. I am looking to get a phone I can install a custom rom on. (Still researching which rom). Since the carrier-specific models of the S7/edge are about $100-200 less used, is there any reason NOT to get a carrier specific model?
Since I'm installing a custom rom, all carrier bloatware would be gone. Wouldn't this effectively be the same as the unlocked model, maybe without international capabilities which I probably wouldn't need anyway.
Is the AT&T model the only one that would work on Straight Talk (AT&T sim)? I'm looking for the cheapest variant that will work.
Thank you.
Some may have a locked bootloader making it impossible to flash TWRP / Custom ROMs
martyxng said:
Still researching which rom
Click to expand...
Click to collapse
There aren't any, you need the canadian or international s7 if you want roms, all american phones have locked bootloaders, there's a half assed root for it but that's it.
peachpuff said:
There aren't any, you need the canadian or international s7 if you want roms, all american phones have locked bootloaders, there's a half assed root for it but that's it.
Click to expand...
Click to collapse
Wouldn't the US unlocked version work? SM-G930U
martyxng said:
Wouldn't the US unlocked version work? SM-G930U
Click to expand...
Click to collapse
The unlocked part refers to its ability to be used on any carrier, nothing to do with the bootloader, its still locked like all the other snapdragon phones.
peachpuff said:
The unlocked part refers to its ability to be used on any carrier, nothing to do with the bootloader, its still locked like all the other snapdragon phones.
Click to expand...
Click to collapse
Ahhhh....it boils down to the chipset. So the G930F with Exynos looks to be what I want for running a custom ROM.
Bingo.
Hi, I came from S4 and teted several Roms. Can I unlock the S7 so easy too?
Unlock what? Carrier, bootloader, or root?
I want to install custom rom CM15 or similar. On my S4 I had TWRP. How can I install it on S7?
Which version of the s7 do you have? I think the Verizon and AT&T versions have a locked bootloader.
Not just Verizon and AT&T, all US models. Sprint, carrier unlocked, etc.
Beanvee7 said:
Not just Verizon and AT&T, all US models. Sprint, carrier unlocked, etc.
Click to expand...
Click to collapse
Thank you for the information. So only Exynos versions have unlocked bootloaders?
I believe there's a chinese snapdragon variant that is the only exception, otherwise yes just Exynos.
Beanvee7 said:
I believe there's a chinese snapdragon variant that is the only exception, otherwise yes just Exynos.
Click to expand...
Click to collapse
Great time to own g930w8
Hi guys, quick question... My good old Note 9 (Canadian variant: SM-N960W) is flashed with an unlocked/unbranded US firmware (SM-960U1), and everything's working flawlessly (Wi-Fi calling, VoLTE, OTA updates, etc.). The main reason I did it: Canadian carriers are useless morons, they take weeks/months to release updates, and I've been more than happy with the quick updates I get with the US firmware installed.
I would like to do the same with my Canadian Note 20 Ultra I will receive Friday, but I want to make sure it's still possible, with "Odin Patched", to flash a firmware from a different region on the Note 20 Ultra.
Someone on XDA did it? Did it go well, and did it break something?
Many thanks
Phazonclash said:
Hi guys, quick question... My good old Note 9 (Canadian variant: SM-N960W) is flashed with an unlocked/unbranded US firmware (SM-960U1), and everything's working flawlessly (Wi-Fi calling, VoLTE, OTA updates, etc.). The main reason I did it: Canadian carriers are useless morons, they take weeks/months to release updates, and I've been more than happy with the quick updates I get with the US firmware installed.
I would like to do the same with my Canadian Note 20 Ultra I will receive Friday, but I want to make sure it's still possible, with "Odin Patched", to flash a firmware from a different region on the Note 20 Ultra.
Someone on XDA did it? Did it go well, and did it break something?
Many thanks
Click to expand...
Click to collapse
I haven't seen anyone do it yet, you can test it out for us and report back how it went.
I too have a Canadian variant of Note 20 Ultra...wondering if switching to the US ROM will enable rooting option?
Yes you can do that what you will not able to get 5g network
I have us model U1 never gef 5g i changed to it rwc roger now get 5g
may2014 said:
Yes you can do that what you will not able to get 5g network
I have us model U1 never gef 5g i changed to it rwc roger now get 5g
Click to expand...
Click to collapse
Thanks for the heads-up, I didn't thought about 5G, but glad to hear it's still possible to do it (flash a firmware from a different region) without bricking the device. I'll probably pick faster updates over 5G for now, considering I live in the middle of nowhere and have access to LTE only anyway
I have a Rogers Note 20 Ultra, I will wait for the updates because here in this part of Ontario, has 5G for whatever reason. I really enjoy streaming Xbox games from the cloud. Almost no delay.
You should be able to flash U or U1 firmware using patched Odin. Just make sure if you have a carrier locked version (not sure if thats a thing in Canada) to have it SIM unlocked before flashing anything, especially if you plan on changing carriers ever. After going to U1 firmware, you can access the service mode menus to enable bands for LTE, NR 5G and DSS. Canada uses 5G bands n38, n66 and n71 and DSS. The only band I don't see available in the US firmware is n38, although it may be available under another CSC like WWD or GCF. I have included a screenshot of the bands I've enabled under the Verizon CSC.
Has anyone with an N986W been able to flash the U1 firmware yet?
Has anyone tried it already? if its possible to flash SM-N986W to U or U1
Did anyone flashed SM-N986W to u or U1. Can you share the experience Please.
jsbutran said:
Did anyone flashed SM-N986W to u or U1. Can you share the experience Please.
Click to expand...
Click to collapse
FlasherX197 said:
Has anyone tried it already? if its possible to flash SM-N986W to U or U1
Click to expand...
Click to collapse
wallyg8r said:
Has anyone with an N986W been able to flash the U1 firmware yet?
Click to expand...
Click to collapse
May2014 did it. See his post I quoted.
may2014 said:
Yes you can do that what you will not able to get 5g network
I have us model U1 never gef 5g i changed to it rwc roger now get 5g
Click to expand...
Click to collapse
Phazonclash said:
Thanks for the heads-up, I didn't thought about 5G, but glad to hear it's still possible to do it (flash a firmware from a different region) without bricking the device. I'll probably pick faster updates over 5G for now, considering I live in the middle of nowhere and have access to LTE only anyway
Click to expand...
Click to collapse
Have you given it a try yet by chance im really wanting to try it. 5g is nothing to me as I'm on pay as you go. Any guides or tips would be super appreciated
may2014 said:
Yes you can do that what you will not able to get 5g network
I have us model U1 never gef 5g i changed to it rwc roger now get 5g
Click to expand...
Click to collapse
This can be fixed by flashing the home_CSC file of your carrier and then there are many other ways to fix this. So take this information lightly.
Phazonclash said:
Thanks for the heads-up, I didn't thought about 5G, but glad to hear it's still possible to do it (flash a firmware from a different region) without bricking the device. I'll probably pick faster updates over 5G for now, considering I live in the middle of nowhere and have access to LTE only anyway
Click to expand...
Click to collapse
This can be fixed by flashing the home_CSC file of your carrier and then there are many other ways to fix this. So take this information lightly. Also he never said he was able to do it, he just had a U1 device.
mellojosh said:
You should be able to flash U or U1 firmware using patched Odin. Just make sure if you have a carrier locked version (not sure if thats a thing in Canada) to have it SIM unlocked before flashing anything, especially if you plan on changing carriers ever. After going to U1 firmware, you can access the service mode menus to enable bands for LTE, NR 5G and DSS. Canada uses 5G bands n38, n66 and n71 and DSS. The only band I don't see available in the US firmware is n38, although it may be available under another CSC like WWD or GCF. I have included a screenshot of the bands I've enabled under the Verizon CSC.
Click to expand...
Click to collapse
What he said :good:. Also you would be able to get on Beta on which a lot of 5G things were fixed / enabled so in fact that might work for you.
Only things i would want you to check before flashing the US firmware is:
1. Is it a dual sim phone? If No you are good.
2. Do you have E-sim Capability enabled? If No you are good.
3. What variant is your phone ? If Snapdragon you are good.
ohh if you are flashing US firmware flash the U1, no need to flash U firmware. Do check if you are sim unlocked because in case you are not and in future you want to sim unlock your device you will have to be on Carrier Firmware, if you plan to stay with your carrier for a long long time and or if you are sim unlocked this should not be of a concern.
Sm-n986w (canadian version)
warriorvibhu said:
This can be fixed by flashing the home_CSC file of your carrier and then there are many other ways to fix this. So take this information lightly.
This can be fixed by flashing the home_CSC file of your carrier and then there are many other ways to fix this. So take this information lightly. Also he never said he was able to do it, he just had a U1 device.
What he said :good:. Also you would be able to get on Beta on which a lot of 5G things were fixed / enabled so in fact that might work for you.
Only things i would want you to check before flashing the US firmware is:
1. Is it a dual sim phone? If No you are good.
2. Do you have E-sim Capability enabled? If No you are good.
3. What variant is your phone ? If Snapdragon you are good.
ohh if you are flashing US firmware flash the U1, no need to flash U firmware. Do check if you are sim unlocked because in case you are not and in future you want to sim unlock your device you will have to be on Carrier Firmware, if you plan to stay with your carrier for a long long time and or if you are sim unlocked this should not be of a concern.
Click to expand...
Click to collapse
Just as a heads up for future reference all Canadian new phone since December 2018 are Sim unlocked
For anyone still wanting to convert their N986W to US unlocked N986U1 I just wanted to say its possible. I used modified Odin and put the U1 firmware on my N986W. I was then able to install the 3 beta's. After a couple of days I switched back to the Canadian firmware. So for anyone wanting to try it, you should be good to go.
wallyg8r said:
For anyone still wanting to convert their N986W to US unlocked N986U1 I just wanted to say its possible. I used modified Odin and put the U1 firmware on my N986W. I was then able to install the 3 beta's. After a couple of days I switched back to the Canadian firmware. So for anyone wanting to try it, you should be good to go.
Click to expand...
Click to collapse
Hello,
I have a n986w (freedom locked) and i was wondering does every band work with u1? Or do we have to manually enable bands from service mode? And if i may ask where did you find modified odin and u1 firmware? And why did you roll back? I am still new to samsung phones, i had my fair share of modding android in past but sammy does thing bit differently so i am but confused about everything
harsh9101 said:
Hello,
I have a n986w (freedom locked) and i was wondering does every band work with u1? Or do we have to manually enable bands from service mode? And if i may ask where did you find modified odin and u1 firmware? And why did you roll back? I am still new to samsung phones, i had my fair share of modding android in past but sammy does thing bit differently so i am but confused about everything
Click to expand...
Click to collapse
Your N986W with freedom is probably not sim locked. I know mine isn't and someone earlier in the thread said that phones in Canada aren't sim locked anymore. So you should be able to proceed. When I switched to the U1 firmware I was receiving LTE signal on freedom. I did not test any other bands as I was just in my living room. There is a guide here on xda regarding enabling all the bands and there is a link to it from the thread I followed in order to switch to the U1 firmware. The link to modified Odin and U1 firmware is also in the same thread. The thread OP is warriorvibhu and its about switching from U to U1 firmware but you can follow it just the same and you can find that thread and the thread for sideloading the beta in the Guides, News and Discussion section. Sorry I couldn't add a link for you I have limited time right now. I rolled back because I just wanted to see if it could be done or not. The instructions were straightforward. Good luck and enjoy.
wallyg8r said:
Your N986W with freedom is probably not sim locked. I know mine isn't and someone earlier in the thread said that phones in Canada aren't sim locked anymore. So you should be able to proceed. When I switched to the U1 firmware I was receiving LTE signal on freedom. I did not test any other bands as I was just in my living room. There is a guide here on xda regarding enabling all the bands and there is a link to it from the thread I followed in order to switch to the U1 firmware. The link to modified Odin and U1 firmware is also in the same thread. The thread OP is warriorvibhu and its about switching from U to U1 firmware but you can follow it just the same and you can find that thread and the thread for sideloading the beta in the Guides, News and Discussion section. Sorry I couldn't add a link for you I have limited time right now. I rolled back because I just wanted to see if it could be done or not. The instructions were straightforward. Good luck and enjoy.
Click to expand...
Click to collapse
Yes my phone is not sim locked. it is in fact unlocked. Does this trip knox? and will I receive OTA updates after I switch to Oneui 3.0? or will I have to manually flash beta otas?
harsh9101 said:
Yes my phone is not sim locked. it is in fact unlocked. Does this trip knox? and will I receive OTA updates after I switch to Oneui 3.0? or will I have to manually flash beta otas?
Click to expand...
Click to collapse
It did not trip knox as its official firmware. You will have to manually flash the betas. Also, when you get the U1 firmware, make sure that you download the one ending in ATID. That is the one required for the beta. I read both the guide for the beta flashing and the guide for flashing the U1 firmware before I proceeded. Also make sure you remove sim card b4 flashing U1. Have sim in when sideloading the betas and be careful you don't accidentally take an update between U1 and beta or you will have to re-flash ATID.
wallyg8r said:
It did not trip knox as its official firmware. You will have to manually flash the betas. Also, when you get the U1 firmware, make sure that you download the one ending in ATID. That is the one required for the beta. I read both the guide for the beta flashing and the guide for flashing the U1 firmware before I proceeded. Also make sure you remove sim card b4 flashing U1. Have sim in when sideloading the betas and be careful you don't accidentally take an update between U1 and beta or you will have to re-flash ATID.
Click to expand...
Click to collapse
I'm going to try this! Would you link me to where I need to download everything? Will test if 5G will still work or not. I am with Rogers in a 5G area. But is it even worth it to use as a daily?
I've looked through threads of people doing the reverse of this. It's been a few years since I've had an android and was running nexus devices then. What's the process to flash an unlocked firmware on an AT&T locked 968U to the 968U1 firmware (assuming there aren't issues doing it)?
Are there any other pitfalls I need to be aware of prior to doing it other than the wifi calling?
If this is already posted somewhere else, please feel free to point me there. I didn't see any info about going from a carrier locked 968U to unlocked firmware.
Thanks in advance.
viperhrdtp said:
I've looked through threads of people doing the reverse of this. It's been a few years since I've had an android and was running nexus devices then. What's the process to flash an unlocked firmware on an AT&T locked 968U to the 968U1 firmware (assuming there aren't issues doing it)?
Are there any other pitfalls I need to be aware of prior to doing it other than the wifi calling?
If this is already posted somewhere else, please feel free to point me there. I didn't see any info about going from a carrier locked 968U to unlocked firmware.
Thanks in advance.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/ota-ota-firmware-n986u-t4143833/page71
I have done this and I lost WIFI calling and VOLTE. I'm very happy with it so far.
viperhrdtp said:
I've looked through threads of people doing the reverse of this. It's been a few years since I've had an android and was running nexus devices then. What's the process to flash an unlocked firmware on an AT&T locked 968U to the 968U1 firmware (assuming there aren't issues doing it)?
Are there any other pitfalls I need to be aware of prior to doing it other than the wifi calling?
If this is already posted somewhere else, please feel free to point me there. I didn't see any info about going from a carrier locked 968U to unlocked firmware.
Thanks in advance.
Click to expand...
Click to collapse
I just did this today went from TMB locked one to unlocked (For a family member) mine is unlocked. All went well no problems at all. Just download the U1 Firmware you want to flash and for CSC use home_csc (In ODin) so you can keep your data and probably the wifi calling feature too ( i did that all features are intact). Use the Odin and firmware from Ota and non Ota thread . Enjoy
ahenderson223 said:
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/ota-ota-firmware-n986u-t4143833/page71
I have done this and I lost WIFI calling and VOLTE. I'm very happy with it so far.
Click to expand...
Click to collapse
What did you gain that made it worth it for you? Also, I'm on a Locked ATT/Firstnet Ultra and am wondering if flashing to an Unlocked Firmware would give me more control of my device.
that1guyty said:
What did you gain that made it worth it for you? Also, I'm on a Locked ATT/Firstnet Ultra and am wondering if flashing to an Unlocked Firmware would give me more control of my device.
Click to expand...
Click to collapse
If your on FirstNet I recommend that you stay on ATT branded software, I'm not sure if band 14 will work properly for you if you are on unlocked software. Thank you for your service!
ahenderson223 said:
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/ota-ota-firmware-n986u-t4143833/page71
I have done this and I lost WIFI calling and VOLTE. I'm very happy with it so far.
Click to expand...
Click to collapse
You can get VoLTE back, but yeah, WiFi calling is not gonna happen.
https://forum.xda-developers.com/ga...to/how-to-activate-video-calling-lte-t4178819
The thread is for T-Mobile, but most of it works with AT&T devices as well.
rjohnstone said:
You can get VoLTE back, but yeah, WiFi calling is not gonna happen.
https://forum.xda-developers.com/ga...to/how-to-activate-video-calling-lte-t4178819
The thread is for T-Mobile, but most of it works with AT&T devices as well.
Click to expand...
Click to collapse
I flashed the U1 firmware (ATJ3) onto my AT&T Note Ultra, then flashed the Home CSC from the AT&T U firmware. I have VoLTE and WiFi calling.
Help!
Hello all, I have a Note 20 Ultra 5g that is unlocked and I'm looking to flash the original ATT firmware for this device.
Having this unlocked version on Firstnet has been nothing but problems and I don't have access to band 14 or wifi calling.
I see this thread is a little old but if anyone could help me out or send me in the right direction I would greatly appreciate it!
I have rooted some of my older phones several several years ago so I think I could pick this back up pretty quickly. I know over the years things seem to get easier and have probably changed quite a bit since I've last done something like this.
Thanks in advance!
droppinbaums said:
I flashed the U1 firmware (ATJ3) onto my AT&T Note Ultra, then flashed the Home CSC from the AT&T U firmware. I have VoLTE and WiFi calling.
Click to expand...
Click to collapse
My comment was made before we were able to change IMS settings directly.
You can get it all now. VoLTE, WiFI Calling, RCS, Video calling...
Verntd3 said:
Help!
Hello all, I have a Note 20 Ultra 5g that is unlocked and I'm looking to flash the original ATT firmware for this device.
Having this unlocked version on Firstnet has been nothing but problems and I don't have access to band 14 or wifi calling.
I see this thread is a little old but if anyone could help me out or send me in the right direction I would greatly appreciate it!
I have rooted some of my older phones several several years ago so I think I could pick this back up pretty quickly. I know over the years things seem to get easier and have probably changed quite a bit since I've last done something like this.
Thanks in advance!
Click to expand...
Click to collapse
AT&T hasn't released any "official" firmware for the Note 20 series.
Since Samsung firmware is multi CSC, just flash any firmware with the same build number as the AT&T variant and use your AT&T SIM card.
Go to this thread https://forum.xda-developers.com/t/ota-and-non-ota-firmware-for-n986u-and-n986u1.4143833/
Make sure you know what device you have, U or U1. Then grab the appropriate version.
Fir AT&T U devices, N986USQU2DUCA or N986USQU2DUCA will work.
For AT&T U1 devices, N986U1UEU2DUCB is the most recent version.
rjohnstone said:
AT&T hasn't released any "official" firmware for the Note 20 series.
Since Samsung firmware is multi CSC, just flash any firmware with the same build number as the AT&T variant and use your AT&T SIM card.
Go to this thread https://forum.xda-developers.com/t/ota-and-non-ota-firmware-for-n986u-and-n986u1.4143833/
Make sure you know what device you have, U or U1. Then grab the appropriate version.
Fir AT&T U devices, N986USQU2DUCA or N986USQU2DUCA will work.
For AT&T U1 devices, N986U1UEU2DUCB is the most recent version.
Click to expand...
Click to collapse
Ok thanks, according to this I assume I have the U1....?
Verntd3 said:
Ok thanks, according to this I assume I have the U1....?
Click to expand...
Click to collapse
Yes, based on screenshot, you have U1
warriorvibhu said:
I just did this today went from TMB locked one to unlocked (For a family member) mine is unlocked. All went well no problems at all. Just download the U1 Firmware you want to flash and for CSC use home_csc (In ODin) so you can keep your data and probably the wifi calling feature too ( i did that all features are intact). Use the Odin and firmware from Ota and non Ota thread . Enjoy
Click to expand...
Click to collapse
So i can flash rom n986u1 on N986u ?
romano_ezzat said:
So i can flash rom n986u1 on N986u ?
Click to expand...
Click to collapse
Yes you can, please look for instructions I have posted instruction on this device forum to go from U to U1 and vice versa
I'm in USA and on Verizon. No matter how much digging on the forums I'm not sure I can ever be sure which exact version of the 8t would be the carrier unlocked international version with available bootloader unlock and root available. Hoping someone could provide with that info, thanks!
If you buy it directly from OP you should be good to go. Just make sure it's not been purchased through T-Mobile and hardware model KB2007.
KB2005
Lost Dog said:
If you buy it directly from OP you should be good to go. Just make sure it's not been purchased through T-Mobile and hardware model KB2007.
Click to expand...
Click to collapse
Why TMobile? Is there not an equilvalent, for example to my V30 that was a non-carrier branded unlocked international model? And Sykojoe mentioned the KB2005, which one is that? I'll admit I haven't even looked up yet.
breacherman said:
Why TMobile? Is there not an equilvalent, for example to my V30 that was a non-carrier branded unlocked international model? And Sykojoe mentioned the KB2005, which one is that? I'll admit I haven't even looked up yet.
Click to expand...
Click to collapse
I'm saying if you are NOT a T-Mobile customer, don't buy a phone that is locked to the T-Mobile network. You need to get them to SIM unlock it then you need to get a bootloader unlock token from OnePlus before you'll be able to flash any other ROMs.
KB2005 is the international version from OnePlus. That is the one you want to get. If the model number is KB2007 it's from T-Mobile.
Lost Dog said:
I'm saying if you are NOT a T-Mobile customer, don't buy a phone that is locked to the T-Mobile network. You need to get them to SIM unlock it then you need to get a bootloader unlock token from OnePlus before you'll be able to flash any other ROMs.
KB2005 is the international version from OnePlus. That is the one you want to get. If the model number is KB2007 it's from T-Mobile.
Click to expand...
Click to collapse
Ok, yea I understand. The carrier unlocked (non-carrier) international one was the one i was looking for, thanks.