Related
Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?
raptax said:
Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?
Click to expand...
Click to collapse
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
Exactly! I'm glad to had help you sometimes if something is done wrong TWRP is dangerous
raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
If you wipe system, then flash oos ROM, TWRP will think there is no os. You can just ignore and boot.
Wiping system then flashing any time will make twrp display "no os installed" it does this because it hasn't created files for twrp to check if you have a ton installed. Flashing twrp then rebooting to twrp fixes it.
Reboot to stock recovery?
Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?
5xonlineage said:
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?
Click to expand...
Click to collapse
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.
Fastboot method?
°Washy said:
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.
Click to expand...
Click to collapse
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.
5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
Do you solve, man?
Fastboot ROM
°Washy said:
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.
Click to expand...
Click to collapse
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?
5xonlineage said:
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?
Click to expand...
Click to collapse
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.
Magisk, boot img?
°Washy said:
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.
Click to expand...
Click to collapse
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?
5xonlineage said:
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?
Click to expand...
Click to collapse
No. Just flash stock boot image if magisk broke something.
Rooted
°Washy said:
No. Just flash stock boot image if magisk broke something.
Click to expand...
Click to collapse
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!
5xonlineage said:
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!
Click to expand...
Click to collapse
I followed that thread for the first A10 release cause there wasn't a worked twrp yet. You are welcome man, when I feel myself usefull I always try to help.
Here i found the latest oxygen os gsi,
people claim it is of oneplus 7 pro, and many people are using it on pocophone and on mi devices.
https://mirrors.lolinet.com/firmware/gsi/
however, i tried to install it, it got installed succeesfuly but it never passed through oneplus boot enimation. can anyone tell will it work or did i need some kind of patch or anything ?
i did installed chinese rom first and then factory reseted and then installed the oxygen os gsi.
Thanks in advance.:fingers-crossed:
anybody ? please.
dheerajverma143 said:
anybody ? please.
Click to expand...
Click to collapse
have you tried to do "Factory Reset" and "Format Data" from TWRP after you flashed the ROM? That usually helps with getting past the boot logo
Habulda said:
have you tried to do "Factory Reset" and "Format Data" from TWRP after you flashed the ROM? That usually helps with getting past the boot logo
Click to expand...
Click to collapse
yes i did everything and it booted to oneplus boot enimatiom and stayed there for 20-30 minuits ,then.i switched back to other rom, however, today i read somewhere that i needed to mount Vendor before reboot to system. but i doubt , coz that process was for another phone.
From which ROM you come , it seems like you didn't follow the instructions, you need a permissive kernel for it to work
Josevega said:
From which ROM you come , it seems like you didn't follow the instructions, you need a permissive kernel for it to work
Click to expand...
Click to collapse
i followed these instructions to install the GSI,
but yes i did not installed any kernel meanwhile.
Hi. For some reason, I'm not able to make my phone working with any custom ROM but MIUI ones. I tried the guides about flashing the 9.5.9 first, flashing the firmware but still, every time I flash a custom ROM (with flash result 1 in TWRP) and I reboot into the system, the phone keeps rebooting quickly after displaying only the MI logo. Apparently it shows that there isn't a valid firmware installed, but I followed the guides with no success. Any advice? Thanks!
Takenfal said:
Hi. For some reason, I'm not able to make my phone working with any custom ROM but MIUI ones. I tried the guides about flashing the 9.5.9 first, flashing the firmware but still, every time I flash a custom ROM (with flash result 1 in TWRP) and I reboot into the system, the phone keeps rebooting quickly after displaying only the MI logo. Apparently it shows that there isn't a valid firmware installed, but I followed the guides with no success. Any advice? Thanks!
Click to expand...
Click to collapse
Hello try to install magisk after installing the rom it worked for me so i hope it does for you as well but don't reboot literally flash the rom when it's done flash magisk and i think it should do it
Format data after flash, not just wipe
Sammy1221 said:
Hello try to install magisk after installing the rom it worked for me so i hope it does for you as well but don't reboot literally flash the rom when it's done flash magisk and i think it should do it
Click to expand...
Click to collapse
Ok, I'll do it when I'll try to install a custom ROM again; I can't keep trying formatting my data and then returning back to MIUI I need to be sure it will work!
siggey said:
Format data after flash, not just wipe
Click to expand...
Click to collapse
Did it! The process I did was:
Boot on TWRP and format data
reboot TWRP
Wipe cache, dalvik, data and System
Flash FW, ROM, GAPPS
Takenfal said:
Hi. For some reason, I'm not able to make my phone working with any custom ROM but MIUI ones. I tried the guides about flashing the 9.5.9 first, flashing the firmware but still, every time I flash a custom ROM (with flash result 1 in TWRP) and I reboot into the system, the phone keeps rebooting quickly after displaying only the MI logo. Apparently it shows that there isn't a valid firmware installed, but I followed the guides with no success. Any advice? Thanks!
Click to expand...
Click to collapse
Which twrp version did you use? Also try Resurrection Remix, it had simple flashing method.
GVN.Gallus said:
Which twrp version did you use? Also try Resurrection Remix, it had simple flashing method.
Click to expand...
Click to collapse
Actually that was the ROM I wanted to use XD I tried 3 different Kernels but noone worked :/ I'm using the twrp-3.3.1-5
Takenfal said:
Actually that was the ROM I wanted to use XD I tried 3 different Kernels but noone worked :/ I'm using the twrp-3.3.1-5
Click to expand...
Click to collapse
Hmm, unofficial twrp 3315 by mauronofrio?
Which device variant do you have, china or global? And device code name are perseus(4g)?
I suggest make a clean flash (without relock) with miflashtool, then install any new EU rom, after that try flash RR, with these step nothing could go wrong.
GVN.Gallus said:
Hmm, unofficial twrp 3315 by mauronofrio?
Which device variant do you have, china or global? And device code name are perseus(4g)?
I suggest make a clean flash (without relock) with miflashtool, then install any new EU rom, after that try flash RR, with these step nothing could go wrong.
Click to expand...
Click to collapse
Yes, It should be the 3.3.1.5 by mauronofrio; my Mi MIX 3 is the global version and right now I'm using the MIUI 11 9.10.10. What version of MIUI should I install using miflashtool? Thanks!
I cannot get data decryption with Android Q on any of the twrp builds.
Sent from my MIX 3 using Tapatalk
Takenfal said:
Yes, It should be the 3.3.1.5 by mauronofrio; my Mi MIX 3 is the global version and right now I'm using the MIUI 11 9.10.10. What version of MIUI should I install using miflashtool? Thanks!
Click to expand...
Click to collapse
Try last global beta 9.6.27, its the most stable with new feature, even better than global stable.
Then install any eu miui10 rom newer than 9.6.27, after that install custom rom.
Remember to boot up after each install, not necessary to complete set up, just boot up to welcome screen.
you saved my life
Sammy1221 said:
Hello try to install magisk after installing the rom it worked for me so i hope it does for you as well but don't reboot literally flash the rom when it's done flash magisk and i think it should do it
Click to expand...
Click to collapse
Even though the thread is quite old I have exactly the same problem with no suggestion here in the forums working to fix it
Can anybody please help me getting this figured out. My goal is to install the Pixel experience Rom for perseus (non 5g) posted here.
You MUST FORMAT data partition when you install anything from stock roms. It should boot after you format, and I'm not saying with the rm -rf option in settings if you have TWRP. It must be a full format of data. I know some of the older ROMs used to take many minutes to boot the first time (like up to 10). I am not actively developing for android after they turned on the hardware backed verity states and broke Google Pay with unlocked bootloader, I left android.
Hi guys, I'm at my wits end with my flashing experience currently.
I just unlocked my K30 PZ, and was messing around with manuelbianco's TWRP, and I seem to have effectively softlocked my phone
I'm pretty tired and have no idea how I ended up here, so all I can really post is what I can observe.
It's constantly stuck in bootloop, and while I have access via fastboot as well as LR-TEAM TWRP(MB doesnt work, boots to logo then goes to black screen), nothing I do seems to be able to break my bootloop.
Attempting to flash MIUI via miflash results in the attempt getting stuck on super.img, while flashing by XiaoMiTool also has the same effect, with the added exit code 1.
Also noteworthy is that according to twrp, "/vendor", "/product" and "/odm" all fail to mount due to invalid arguement, which I have no idea about.
I've attempted to manually mount them via twrp, and try and flash stock miui, however there is no change in the behavior.
Any help is appreciated, thanks.
PipPasadran said:
Hi guys, I'm at my wits end with my flashing experience currently.
I just unlocked my K30 PZ, and was messing around with manuelbianco's TWRP, and I seem to have effectively softlocked my phone
I'm pretty tired and have no idea how I ended up here, so all I can really post is what I can observe.
It's constantly stuck in bootloop, and while I have access via fastboot as well as LR-TEAM TWRP(MB doesnt work, boots to logo then goes to black screen), nothing I do seems to be able to break my bootloop.
Attempting to flash MIUI via miflash results in the attempt getting stuck on super.img, while flashing by XiaoMiTool also has the same effect, with the added exit code 1.
Also noteworthy is that according to twrp, "/vendor", "/product" and "/odm" all fail to mount due to invalid arguement, which I have no idea about.
I've attempted to manually mount them via twrp, and try and flash stock miui, however there is no change in the behavior.
Any help is appreciated, thanks.
Click to expand...
Click to collapse
Which ROM did you want to flash?
I grabbed the latest Poco F2 Pro zip from the mi community, since I couldn't find any K30 Pro ROMs
PipPasadran said:
I grabbed the latest Poco F2 Pro zip from the mi community, since I couldn't find any K30 Pro ROMs
Click to expand...
Click to collapse
Do you want a miui stock rom or eu roms or aosp roms?
My end goal is an AOSP rom like arrowOS or evolutionX.
I tried flashing arrowOS after everything had happened. It seems to flash normally, but on reboot it's shows the POCO logo then proceeds to bootloop
PipPasadran said:
My end goal is an AOSP rom like arrowOS or evolutionX.
I tried flashing arrowOS after everything had happened. It seems to flash normally, but on reboot it's shows the POCO logo then proceeds to bootloop
Click to expand...
Click to collapse
Is your phone is a CN version?
Yeap
PipPasadran said:
Yeap
Click to expand...
Click to collapse
arrowOS or evolutionX have not the same firmware.
Dont relock your bootloader(otherwise the phone is dead)
1/flash this twrp with fasboot command https://androidfilehost.com/?fid=17248734326145679747
2/Twrp wipe format data write yes,reboot twrp
3/otg the rom or push in internal storage
4/flash rom(firmware)
5/format data again reboot twrp
6/flash rom(with the op instructions)
NOSS8 said:
arrowOS or evolutionX have not the same firmware.
Dont relock your bootloader(otherwise the phone is dead)
1/flash this twrp with fasboot command https://androidfilehost.com/?fid=17248734326145679747
2/Twrp wipe format data write yes,reboot twrp
3/otg the rom or push in internal storage
4/flash rom(firmware)
5/format data again reboot twrp
6/flash rom(with the op instructions)
Click to expand...
Click to collapse
To be clear, by rom u mean evoX or arrowOS right?
PipPasadran said:
To be clear, by rom u mean evoX or arrowOS right?
Click to expand...
Click to collapse
4/flash rom(firmware)
Requires CN version MIUI 12.2.1.0 firmware and vendor or
MIUI V12.2.1.0.RJKMIXM
6/flash AOSP rom(with the op instructions)
NOSS8 said:
4/flash rom(firmware)
Requires CN version MIUI 12.2.1.0 firmware and vendor or
MIUI V12.2.1.0.RJKMIXM
6/flash AOSP rom(with the op instructions)
indeed these two roms have the same firmware
Click to expand...
Click to collapse
Thanks, its about 130am over here
Evo x global firmware and arrow cn firmware.
Not the same!!!!!!!!
indeed these two roms have the same firmware
Thanks, I went back to read the flashing instructions
Tiredness isn't helping though XD
NOSS8 said:
Evo x global firmware and arrow cn firmware.
Not the same!!!!!!!!
indeed these two roms have the same firmware
Click to expand...
Click to collapse
Final update before I sleep
I've followed the steps, and managed to get arrowOS to boot screen
But I waited 20 mins for initial boot, and was stuck at the loading screen
Formatted data again to retry, and am now letting it run for as long as I can, but so far I'm 15 mins in now and have not seen anything more than the initial boot loading screen.
Thanks for the help, cheers
Evo x
PipPasadran said:
Final update before I sleep
I've followed the steps, and managed to get arrowOS to boot screen
But I waited 20 mins for initial boot, and was stuck at the loading screen
Formatted data again to retry, and am now letting it run for as long as I can, but so far I'm 15 mins in now and have not seen anything more than the initial boot loading screen.
Thanks for the help, cheers
Click to expand...
Click to collapse
So which firmware do you flash?
NOSS8 said:
Evo x
So which firmware do you flash?
Click to expand...
Click to collapse
CN firmware and arrowOS A11 from their site
PipPasadran said:
CN firmware and arrowOS A11 from their site
Click to expand...
Click to collapse
format data yes,reboot twrp
flash the rom https://sourceforge.net/projects/xi...MK30Pro_V12.2.1.0.RJKCNXM_v12-11.zip/download
reboot system
nothing else
first boot take 5/6 minutes.
if the phone restarts on this rom you will be sure that the correct firmware is installed
NOSS8 said:
format data yes,reboot twrp
flash the rom https://sourceforge.net/projects/xi...MK30Pro_V12.2.1.0.RJKCNXM_v12-11.zip/download
reboot system
nothing else
first boot take 5/6 minutes.
if the phone restarts on this rom you will be sure that the correct firmware is installed
Click to expand...
Click to collapse
Im downloading that rom but my download speed is quite slow, update tmr. But is it normal that after format data and yes, the arrowOS loading screen still comes up?
PipPasadran said:
Im downloading that rom but my download speed is quite slow, update tmr. But is it normal that after format data and yes, the arrowOS loading screen still comes up?
Click to expand...
Click to collapse
yep ,but you can before flashing the EU rom after format data,do a wipe all except OTG.
NOSS8 said:
yep ,but you can before flashing the EU rom after format data,do a wipe all except OTG.
Click to expand...
Click to collapse
So I formatted data, wiped all except OTG and then flashed the xiaomi.eu rom
Phone simply goes back into 2 bootloops before booting into twrp
Also to note, in advanced wipe system partition is missing in twrp. There is an option to mount, but it never shows up in wipe.
Alright I finally rooted my Google pixel 6a using the pixel flasher and it is a really nice tool. My problem now is this phone isn't supported on the twrp app.and I don't remember seeing the option to flash twrp from the pixel flasher. Any advice on where and how I would go about getting a recovery installed? Thanks
Kerrylee1738$$$ said:
Alright I finally rooted my Google pixel 6a using the pixel flasher and it is a really nice tool. My problem now is this phone isn't supported on the twrp app.and I don't remember seeing the option to flash twrp from the pixel flasher. Any advice on where and how I would go about getting a recovery installed? Thanks
Click to expand...
Click to collapse
Pixel devices do not have dedicated recovery partitions, as Samsung devices do. The recovery kernel is in the boot image.
There is no need to flash TWRP on a Pixel device. If you want to use it, you can live boot it, but for the most part it's unnecessary because we can flash partitions directly from bootloader.
V0latyle said:
Pixel devices do not have dedicated recovery partitions, as Samsung devices do. The recovery kernel is in the boot image.
There is no need to flash TWRP on a Pixel device. If you want to use it, you can live boot it, but for the most part it's unnecessary because we can flash partitions directly from bootloader.
Click to expand...
Click to collapse
I think he means this, live booting into any TWRP img doesnt work, he is asking for where to find a custom recovery to live boot or whatever, right? @Kerrylee1738$$$
Yes that's right... I figured Google pixel 6a had twrp but after looking it didn't. Any advice on a alternative to TWRP would be greatly appreciated
Kerrylee1738$$$ said:
Yes that's right... I figured Google pixel 6a had twrp but after looking it didn't. Any advice on a alternative to TWRP would be greatly appreciated
Click to expand...
Click to collapse
Depending on what youre wanting it for, there isnt an alternative.
Using TWRP to flash a ROM on a phone is the only way I know how. Would ROM manager work on flashing this nitrogen ROM I downloaded?
Negative ghostwriter
Kerrylee1738$$$ said:
Using TWRP to flash a ROM on a phone is the only way I know how. Would ROM manager work on flashing this nitrogen ROM I downloaded?
Click to expand...
Click to collapse
You have to flash it with fastboot mode and stock or lineage recovery.
ROM's are flashed either via fastboot or as an OTA in recovery.
I decided just to wait for a twrp recovery to become available and started working on my xt2131-1 and OnePlus Nord device again.
Kerrylee1738$$$ said:
I decided just to wait for a twrp recovery to become available and started working on my xt2131-1 and OnePlus Nord device again.
Click to expand...
Click to collapse
TWRP will likely never be available for this device.
That's kinda disappointing
Kerrylee1738$$$ said:
That's kinda disappointing
Click to expand...
Click to collapse
Hasnt worked on Pixels since the P3 I think.
It isn't hard to flash rooms, just need a computer every time. Twrp is aparenntly dead
Twilightsparklez said:
It isn't hard to flash rooms, just need a computer every time. Twrp is aparenntly dead
Click to expand...
Click to collapse
Correct....flashing roms is super simple....just need a PC like you said.
ctfrommn said:
Hasnt worked on Pixels since the P3 I think.
Click to expand...
Click to collapse
wellll, p3 was the end of other recoveries like orange fox (unofficial) up to p5 i have seen twrp tho..and its possible to build off Los cuz that works for every device.