Hello everyone, has anyone tested installing a GSI ROM to see how the device behaves?
I'm about to venture if no one has been able to test it, it really is a beautiful team but the software is an anchor for the equipment it has, I'm about to test under Pixel Experience.
I got used to using TWRP, but at the moment there is not for this model, does anyone have the necessary process and files for the snapdragon 888?
Thanks
Any luck?
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
Among other GSI could not install it on the device, I can not connect it in fastboot mode without TWRP, I would need it.
Any developer who can give me a hand, I'm on vacation available to test.
I have tried to create ROM .tar to pass it with ODIN but it does not allow me to do it either, which I have been able to do with the S10e before.
Anyway, some experienced developer lets me know and we do tests.
Thank you and excuse my English.
I've tried running the lineage gsi via DSU loader but I get kicked to recovery on reboot.
Twrp?
ssvdude said:
I've tried running the lineage gsi via DSU loader but I get kicked to recovery on reboot.
Click to expand...
Click to collapse
What process did you do? to see if I change with other GSI
Clusco said:
Twrp?
Click to expand...
Click to collapse
Still without expert developers to create it.
CarlosEHidalgo said:
What process did you do? to see if I change with other GSI
Click to expand...
Click to collapse
Here you go
DSU Sideloader
I tried both lineage and AOSP
ssvdude said:
Here you go
DSU Sideloader
I tried both lineage and AOSP
Click to expand...
Click to collapse
Excellent thanks, tomorrow I'll be doing tests with various ROMs and if I can start it I'll let you know here.
ssvdude said:
Here you go
DSU Sideloader
I tried both lineage and AOSP
Click to expand...
Click to collapse
the same is not only the GSI, apparently it would be necessary to pass the vbmeta.img through Odin
CarlosEHidalgo said:
Still without expert developers to create it.
Click to expand...
Click to collapse
Sad to hear that with powerful processors...
I did tests with DSU and the start of two GSIs worked excellent, one of efran pixel and another generic, I mention that my computer is rooted, the only thing is that when I close the lid it blocks completely the screen stops turning on, I'm for testing with Android 12L, which is more intended for folding to see how it turns out, but hey, at least this is the closest thing to a custom ROM. Works data, calls, playstore, all basic functions with Pixel GSI efran ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarlosEHidalgo said:
I did tests with DSU and the start of two GSIs worked excellent, one of efran pixel and another generic, I mention that my computer is rooted, the only thing is that when I close the lid it blocks completely the screen stops turning on, I'm for testing with Android 12L, which is more intended for folding to see how it turns out, but hey, at least this is the closest thing to a custom ROM. Works data, calls, playstore, all basic functions with Pixel GSI efran ROM.
Click to expand...
Click to collapse
Hi Carlos. I want to thank you for what you're doing. Because of how long you've been with this pre-alpha effort. Our lovely Zflip 3 is a wonderful phone, although we don't have a twrp for it yet, we don't have a custom rom for it. It may be because no one is interested in the development we used to have anymore, or because development efforts are becoming more challenging. No matter what the reason, here you are trying to create something.I don't have that knowledge that you seem to have. Please don't give up.
CarlosEHidalgo said:
I did tests with DSU and the start of two GSIs worked excellent, one of efran pixel and another generic, I mention that my computer is rooted, the only thing is that when I close the lid it blocks completely the screen stops turning on, I'm for testing with Android 12L, which is more intended for folding to see how it turns out, but hey, at least this is the closest thing to a custom ROM. Works data, calls, playstore, all basic functions with Pixel GSI efran ROM.
Click to expand...
Click to collapse
Where did you find or build these ROMs? I would like to help if possible.
ssvdude said:
Where did you find or build these ROMs? I would like to help if possible.
Click to expand...
Click to collapse
The link is in the 3rd post for a list of gsi roms, but I'm not sure which ones they tried as most of them are 2 or 3 years old.
beanbean50 said:
The link is in the 3rd post for a list of gsi roms, but I'm not sure which ones they tried as most of them are 2 or 3 years old.
Click to expand...
Click to collapse
Among all pixels Erfan from such list. the most recent is from oct 19 2021
beanbean50 said:
The link is in the 3rd post for a list of gsi roms, but I'm not sure which ones they tried as most of them are 2 or 3 years old.
Click to expand...
Click to collapse
Hello, rather they are new compilations, the one that has worked almost excellent for me is:
https://github.com/ponces/treble_build_pe/releases
The only serious detail is that the equipment stops turning on the screen when it is closed.
BVB3?
It's sad to know that there are no ROM developers for this device but if there is someone who develops applications for the external screen and it costs 100$...
Just a personal comment...
So far the Android 12 Pixel Experience GSI works almost everything, I can't keep the screen active when I close the device, I hope that with the Android 12.1 update this fault can be solved, which would be more oriented to folding devices.
I'll be reporting the progress.
Related
I have found this beautiful rom and flashed.???
Unless it is your work, do not post without permission.
Per the rules of XDA You must post the Rom and its source code.
Do that and you can post
imonshahed said:
I have found this beautiful rom and flashed.
Everything is work fine and properly???
But I didn't found face unlock here
Otherwise this is perfect
Click to expand...
Click to collapse
Where did you find the ROM?
GApps included? Chrome chrashing or not?
What about GCam?
Is this the latest build?
Is it suitable for a daily driver?
everything is working properly in my daily use..
you can try this
and everything is included
Sir, you are in the wrong section. This is ROMs releases only.
Any bug found?
Gapps included or not?
harsh3172 said:
Gapps included or not?
Click to expand...
Click to collapse
Yes, yes includ
included
no....
this Tulip or twolip channel is dying! This is the most updated, stable rom android Q for tulip devices! Please post the source
imonshahed said:
I have found this beautiful rom and flashed.
Unless it is your work, do not post without permission.
Per the rules of XDA You must post the Rom and its source code.
Do that and you can post
Click to expand...
Click to collapse
post the rom in questions & answer
khoaphm20 said:
post the rom in questions & answer
Click to expand...
Click to collapse
I'm not sure if this is what the OP was talking about but... PixelExperience 10.0 BETA GSI is there. (I'm pretty sure Redmi Note 6 Pro is ARM64 A)
I tried flashing it and but it wouldn't boot, I was using cDroid so I probably need to go back to Xiaomi.eu rom because Cdroid patched vendor... at least I think that is what this guide says I should do and it says to flash Fixzygote_v2 too so I'mg to try it and see if I can get it working.
EDIT: Ok I flashed the PixelExperience 10.0 BETA GSI in TWRP and then Fixzygote_v2 and it booted to setup. I tried to restore my phone from google cloud and after I entered my pin it wouldn't advance so I rebooted the phone. After it rebooted I was able to restore my google cloud backup, no need to flash Gapp and so far the the bugs I've found is the Camera doesn't work and Wifi is doesn't always work... keeps crashing.
Now that I know Fixzygote_v2 is needed I'm goign to try out some Android Q GSI's.
skuly1775 said:
I'm not sure if this is what the OP was talking about but... PixelExperience 10.0 BETA GSI is there. (I'm pretty sure Redmi Note 6 Pro is ARM64 A)
I tried flashing it and but it wouldn't boot, I was using cDroid so I probably need to go back to Xiaomi.eu rom because Cdroid patched vendor... at least I think that is what this guide says I should do and it says to flash Fixzygote_v2 too so I'mg to try it and see if I can get it working.
EDIT: Ok I flashed the PixelExperience 10.0 BETA GSI in TWRP and then Fixzygote_v2 and it booted to setup. I tried to restore my phone from google cloud and after I entered my pin it wouldn't advance so I rebooted the phone. After it rebooted I was able to restore my google cloud backup, no need to flash Gapp and so far the only bug I've found is the Camera doesn't work.. keeps crashing.
Ok and seems like I might have having wifi problems.
Click to expand...
Click to collapse
Yes this rom faced wifi problems, it's not your wifi, it's the rom! It's not the OP meaning but I know it's cool if you post it in questions&answer, in form of a sharing post
khoaphm20 said:
Yes this rom faced wifi problems, it's not your wifi, it's the rom! It's not the OP meaning but I know it's cool if you post it in questions&answer, in form of a sharing post
Click to expand...
Click to collapse
I found https://mirrors.lolinet.com/firmware/gsi/ but haven't flashed any yet I am still downloading them, Seems like Camera and Wifi isn't working on any of the Android 10 roms I've tried so far.
I guess if I get lucky and find one that works I'll share in the questions&answer section if nobody else had yet..
Every single GSI I tried was either too buggy or too big to install.
I went back to Xiaomi.eu because even crDroid had minor bugs that annoyed me.
skuly1775 said:
I'm not sure if this is what the OP was talking about but... PixelExperience 10.0 BETA GSI is there. (I'm pretty sure Redmi Note 6 Pro is ARM64 A)
I tried flashing it and but it wouldn't boot, I was using cDroid so I probably need to go back to Xiaomi.eu rom because Cdroid patched vendor... at least I think that is what this guide says I should do and it says to flash Fixzygote_v2 too so I'mg to try it and see if I can get it working.
EDIT: Ok I flashed the PixelExperience 10.0 BETA GSI in TWRP and then Fixzygote_v2 and it booted to setup. I tried to restore my phone from google cloud and after I entered my pin it wouldn't advance so I rebooted the phone. After it rebooted I was able to restore my google cloud backup, no need to flash Gapp and so far the the bugs I've found is the Camera doesn't work and Wifi is doesn't always work... keeps crashing.
Now that I know Fixzygote_v2 is needed I'm goign to try out some Android Q GSI's.
Click to expand...
Click to collapse
i think OP was talking about the android 10 pixel experience rom in the tulip_updates telegram that rom's link is down tho
martimcavaco said:
i think OP was talking about the android 10 pixel experience rom in the tulip_updates telegram that rom's link is down tho
Click to expand...
Click to collapse
Oh I never used Telegram, I just installed it on windows.
Is this the rom you're talking about? https://t.me/tulipofficial/252341
I'm downloading the Rom now. PixelExperience_twolip-10.0-20191012-1227-BETA-BOOZA.zip
EDIT: I haven't had time to flash it but Thanks for pointing me in the right direction (Telegram).
EDIT2: I'm flashing it now.
EDIT3: I have it on my phone now and so far its working really well... only things I don't like is double-tap to wake doesn't seem to work and with full gesture mode enabled there is still some tiny bar at the bottom of the screen that doesn't see to be able to be disabled
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
check it out in question and answer section
check it out
skuly1775 said:
I found https://mirrors.lolinet.com/firmware/gsi/ but haven't flashed any yet I am still downloading them, Seems like Camera and Wifi isn't working on any of the Android 10 roms I've tried so far.
I guess if I get lucky and find one that works I'll share in the questions&answer section if nobody else had yet..
Click to expand...
Click to collapse
It works for me! The OP posted this rom in Q&A, which let me using havoc 3.0 rom, camera and wifi seems to be ok on this rom using MGC GCAM 6.1.021 BSG mod and nikGAPPS
Hey everyone,
so one of my friends was trying to figure out how to set a custom animation on Android 11. The apps which were avaiable on the playstore didnt work anymore starting from android 10, so we decided to create our own app. (Also sorry, this is my first post here ^^)
Requirements:
- Have your smartphone rooted with Magisk
To use the app pick one of the 200+ animations (more to be added, and eventually a custom upload feature coming too...) and install it like any other module. Thats it!
LINK (Google Playstore) >> Bootiful - Custom Bootanimations in Android 10+
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Known Issues:
- Doesnt support QMG (Samsung Bootanimation) as of now (we are working on that)
- MI A3 doesnt override boot animation https://forum.xda-developers.com/t/...d-10-11-requires-magisk.4238141/post-84557499
Thanks, but it did not work on Mi A3 Android 11. The modules install correctly, but the default bootanimation is always there when restarting.
By the way, it would be good to have an option to backup the original bootanimation.
Technical said:
Thanks, but it did not work on Mi A3 Android 11. The modules install correctly, but the default bootanimation is always there when restarting.
By the way, it would be good to have an option to backup the original bootanimation.
Click to expand...
Click to collapse
Thanks for the info, we will look into this Do you have any additional information you could give us for further testing, that would be great!
Will this work on Samsung models like US S20 lines?
Smartphones13 said:
Will this work on Samsung models like US S20 lines?
Click to expand...
Click to collapse
In theory, as long as Magisk runs on your phone, it should work. Since Im a student, i dont have that many devices to test (just a new One Plus) and therefore I cant assure it.
There are probably some issues still hidden and getting to know them is the most important step to fix them, so testing it on various devices would do us a great job ^^
L3the said:
In theory, as long as Magisk runs on your phone, it should work. Since Im a student, i dont have that many devices to test (just a new One Plus) and therefore I cant assure it.
There are probably some issues still hidden and getting to know them is the most important step to fix them, so testing it on various devices would do us a great job ^^
Click to expand...
Click to collapse
OK. I will test and let you know.
I don't assume that these take into account Samsung's QMG's ?
KineSight said:
I don't assume that these take into account Samsung's QMG's ?
Click to expand...
Click to collapse
Had to google that haha, ok.
In this version not, but i guess supporting qmgs should be possible, Ill let you know if I have something new.
L3the said:
Had to google that haha, ok.
In this version not, but i guess supporting qmgs should be possible, Ill let you know if I have something new.
Click to expand...
Click to collapse
Cool.
L3the said:
Thanks for the info, we will look into this Do you have any additional information you could give us for further testing, that would be great!
Click to expand...
Click to collapse
Any module is correctly installed and seems to be loading correctly, but the bootanimation is the same.
Technical said:
Any module is correctly installed and seems to be loading correctly, but the bootanimation is the same.
Click to expand...
Click to collapse
Thanks, i will look into it
Works great on aosp (Shapeshift os Android 11) on xiaomi mi10. Thx !
Skyllery said:
Works great on aosp (Shapeshift os Android 11) on xiaomi mi10. Thx !
Click to expand...
Click to collapse
Thanks, thats great to hear
Doesn't work for me, stock boot animation still plays. Xiaomi Redmi Note 9 Pro running PixysOS (Android 10). Thanks though!
razerphynx said:
Doesn't work for me, stock boot animation still plays. Xiaomi Redmi Note 9 Pro running PixysOS (Android 10). Thanks though!
Click to expand...
Click to collapse
Hey there, if you could provide me additional information like logs that would be great Thanks for the response!
Also to add: Thats the second Redmi, so I guess its definietly some issue like with samsungs qmg. I will check on that!
Thank You for this app, work without problems on my Xiaomi mi9 MIUI 12.2.
L3the said:
Hey there, if you could provide me additional information like logs that would be great Thanks for the response!
Also to add: Thats the second Redmi, so I guess its definietly some issue like with samsungs qmg. I will check on that!
Click to expand...
Click to collapse
What logs can I provide and where can I find them? Cheers.
razerphynx said:
What logs can I provide and where can I find them? Cheers.
Click to expand...
Click to collapse
Basically the same logs @Technical gave me, see his post here: Logfiles
Otherwise, you can look into this: Magisk Help
L3the said:
Basically the same logs @Technical gave me, see his post here: Logfiles
Otherwise, you can look into this: Magisk Help
Click to expand...
Click to collapse
Thanks for the guidance, here you go:
razerphynx said:
Thanks for the guidance, here you go:
Click to expand...
Click to collapse
Thanks, this will help us
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Project-Zephyrus for OnePlus 8 [instantnoodle]
What is this?
Project-Zephyrus - Minimal Android Fork Focused on Design and Performance!
Fast and Smooth: Project-Zephyrus is more smooth (i.e. less jank) and responds faster than stock.
Clean UI design: We Pay Attention to details in the User Interface.
Privacy: Project-Zephyrus helps keep your Data Private with Camera & Microphone Indicators, Internet & Sensor Permissions.
Based on Android 12.1
Whats working?
Why to list if everything is working fine.
Known issues
Nothing yet
You tell me
As only Essential Features will be added so this list will be updated whenever there is a new feature
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from Github Releases
Donate Send ur money with a note (Zephyrus) or (Sameer) . Thank you
Liked my work? Give me a beer
UPI ID: [email protected]
Stay tuned
Our Telegram Group​
Android OS version: 12.1
Security patch level: June 2022
Build author/Device Maintainer: @HELLBOY017
Kernel Source code: https://github.com/Project-Zephyrus/meteoric_kernel
Source code: https://github.com/Project-Zephyrus
Zephyrus Developer: HELLBOY017
Screen Shots: Some Screenshots Spam Here
Reserved
Reserved
Ooh, new ROM. By chance, does your Device Extras implementation have 5G NSA/SA control?
Nice ROM but toooo much google ****. Without this can be really nice.
The best custom rom for oneplus 8/8pro. Fod speed and rom speed is insane.
Magisk sideloads but doesnt show up in my apps, any ideas?--------------Nevermind, after I setup the phone, and restarted, it appeared
Hi
I'm on the latest crdroid A12 with crdroid recovery
How to install this rom?
Thanks
So far, so awesome. Tried a handful of roms, and this is the most responsive to date
Can anyone tell me how the battery life and camera (it's OxygenOS camera right?) is working on this ROM?
And how does the speakers sound now, on this ROM?
raftomas88 said:
Can anyone tell me how the battery life and camera (it's OxygenOS camera right?) is working on this ROM?
And how does the speakers sound now, on this ROM?
Click to expand...
Click to collapse
Battery life is good camera is oos and everything is well built and amazing!
Suennio said:
Hi
I'm on the latest crdroid A12 with crdroid recovery
How to install this rom?
Thanks
Click to expand...
Click to collapse
Use crdroid recovery or a different one
Does safetynet is ok out of the box (for Netflix, Google pay and bank apps) ?
And does it need to restore a11 firmware to install, or is it ok from a12 (cr droid 8.5) ?
astro2737 said:
Does safetynet is ok out of the box (for Netflix, Google pay and bank apps) ?
And does it need to restore a11 firmware to install, or is it ok from a12 (cr droid 8.5) ?
Click to expand...
Click to collapse
Safetynet works yes
If you are already in a custom rom, no need go back to oxygen os 11.
Do we have to pay to download this ROM? I keep getting download unauthorized error.
Ramrod71 said:
Do we have to pay to download this ROM? I keep getting download unauthorized error.
Click to expand...
Click to collapse
No. Custom roms here are free and will always will be unless said by a maintainer and I have never seen a paid custom rom. Some roms want you to pay to lock bootloader like Jaguar ROM and Pixel Experience, you can lock bootloader depending on your device but thats pretty much it for the paying stuff and that's it
thattechguy_69 said:
No. Custom roms here are free and will always will be unless said by a maintainer and I have never seen a paid custom rom. Some roms want you to pay to lock bootloader like Jaguar ROM and Pixel Experience, you can lock bootloader depending on your device but thats pretty much it for the paying stuff and that's it
Click to expand...
Click to collapse
If that's the case do you know why I keep getting unauthorized download error. Tried it on both my phone and PC. I'm currently on Evo but want to give this a whirl. Thanks
Ramrod71 said:
If that's the case do you know why I keep getting unauthorized download error. Tried it on both my phone and PC. I'm currently on Evo but want to give this a whirl. Thanks
Click to expand...
Click to collapse
Check my post here #70
Anyone noticing the volume in call is just really really loud at minimum volume with the ROM? Even on speaker phone or in ear, it's just way too loud.
I have been using this rom for about 4 days and its been very dependable all around. Only problem for me is that Dolby Atmos doesnt seem to work. I am unrooted and use no mods. Anyone with the same issue?
I installed it. Seems fine so far. Nice that OnePlus is rolling it out so quickly. I bet they are wanting to put the dumpster fire that was OOS12 behind them ASAP.
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
community.oneplus.com
Wondering if I can carry magisk 25.2 over to ob1 and obtain root?
Phoenix47 said:
Do you have L1 ?
Do you have dual sim bug ?
Click to expand...
Click to collapse
Funny enough, I do have L1 back even though I had lost it after my last time using the MSM Tool (which shouldn't have happened because my bootloader is locked but I didn't care enough to fix it).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There is no dual SIM bug when using the official global firmware on an LE2115. T-Mobile devices will probably still have it.
Can root/magisk still be used for the OOS Dual Sim patch for T-Mobile devices?
You mean colorOS with oxygen OS skin lol
Vmo x said:
You mean colorOS with oxygen OS skin lol
Click to expand...
Click to collapse
I really don't care anymore what they call it as long as it's stable. Everyone knows by now that there are next to no differences in the two OSes besides the name.
EtherealRemnant said:
I really don't care anymore what they call it as long as it's stable. Everyone knows by now that there are next to no differences in the two OSes besides the name.
Click to expand...
Click to collapse
I haven't used it myself due to the fact that the stock roms are covered in bloatware., There should be more development towards custom roms soon though id hope considering the android 13 has been released. Give it a few months
Phoenix47 said:
I am having problem with playstore. How about you ?
Click to expand...
Click to collapse
What problems? It seems to be working for me?
Phoenix47 said:
It is not loading for me.
Click to expand...
Click to collapse
Try clearing the cache, rebooting, etc. Working fine here.
Phoenix47 said:
View attachment 5716353
Click to expand...
Click to collapse
Strange. Working fine here.
EtherealRemnant said:
I installed it. Seems fine so far. Nice that OnePlus is rolling it out so quickly. I bet they are wanting to put the dumpster fire that was OOS12 behind them ASAP.
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
community.oneplus.com
Click to expand...
Click to collapse
It says on changelog OnePlus says a data wipe is necessary to boot into ob1 after A12. Did you have to wipe date to get a boot?
Phoenix47 said:
Can't install play system update.View attachment 5716443
Click to expand...
Click to collapse
That hasn't worked for me since OOS11.
mattie_49 said:
It says on changelog OnePlus says a data wipe is necessary to boot into ob1 after A12. Did you have to wipe date to get a boot?
Click to expand...
Click to collapse
No, the log is wrong, no wipe needed.
You can't feel the pain of Us EU users!
All I am hoping for is OnePlus releasing the source codes for OOS 13. The fact this never happened for OOS 12, I think I have a better hope winning $1 billion dollars.
Phoenix47 said:
Dude just convert to global rom.
I did from tmobile to global.
Click to expand...
Click to collapse
Please help me ,how convert T-Mobile TO GLOBAL ROM, OnePlus 9 5G LE2117 ??
HOW TO FIND BOOTUNLOCK TOKEN CODE?
I TRIED AGAIN AND AGAIN BOOTUNLOCK METHOD.. MISSING TOKEN CODE.
Anyone with Verizon sim don't waste your time. Ob1 nukes your sim. No data. No way to add apn
And to add I'm super f'n excited. New A13 is sleek very nice and smooth and many many new options. I love it . They will fix Verizon not detecting sim in ob2 I hope. I'm stoked it's a great build.
Phoenix47 said:
It is already mentioned in the thread on oneplus forum.
Click to expand...
Click to collapse
Technically it says carrier phones which would normally mean that unlocked ones would work and that isn't the case, it's all Verizon.
Phoenix47 said:
There is no need for unlocking bootloader. There is a msm conversion tool.
Convert T-Mobile OnePlus 9 to Global (or other) firmware
** USE THIS AT YOUR OWN RISK. ** READ THROUGH THE STEPS BEFORE ATTEMPTING. IF AT ANY POINT WHILE READING THESE STEPS YOU GET CONFUSED, YOU PROBABLY SHOULDN'T ATTEMPT THIS. ** BACKUP YOUR FILES AND APP DATA AS THIS WILL WIPE YOUR PHONE. ** BACKUP...
forum.xda-developers.com
Click to expand...
Click to collapse
Preload.bin and image.bin failed show in msm tool ,Not installed,, how to fix it?
EtherealRemnant said:
Technically it says carrier phones which would normally mean that unlocked ones would work and that isn't the case, it's all Verizon.
Click to expand...
Click to collapse
He's right and I read it correctly. Why I continued with update .Says the Verizon variant which there isn't one. Only way the developers thought to communicate with us. Meaning Verizon sim. Won't read CDMA_less/Volte (voice over lte) yet.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UPDATED FOR April 21st 2023
I am not affiliated with the official Evolution-X team.
link to kernel source: https://github.com/psybernetiq/kernel_google_redbull_tiramisu-pixel
my other repos for the device and vendor are there as well.
downloads:
EvolutionX-13 - Google Drive
drive.google.com
flash the vendor_boot img. Then adb sideload the zip file in recovery.
Notes:
BACKUP YOUR DATA FOR THIS BUILD. YOU WILL PROBABLY HAVE TO RESET YOUR DEVICE TO FLASH THS ROM. SORRY FOR INCONVENIENCE.
I make reference to 9.9.9.9 (quad9 dns) rather than 1.1.1.1 (cloud flare) to 1 part in the code under bionic/libc/dns/net/getaddrinfo.c.
I added bromite webview support (does not require you to be rooted)
I added a flag called TARGET_IS_PIXEL_5 := true so that this device gets a hit to make persist.sys.disable_rescue=true. Without this, the device will boot but then reboot to recovery within ~10seconds.
I did not add wireguard support to the kernel this time. Let me know if you want me to add it back in.
passes safety net
The screen on my pixel 5 cracked back in March and I got a Pixel 7 Pro. I still have the pixel 5, though, and I tested this rom on the device before uploading and sharing here.
The March update was super late coming from Google, and the Evolution-X team was making a bunch of changes during this time (and they still are.) So consider this release an off-cycle release.
I was also having trouble building the ROM for a few weeks due to my laptop's RAM (32GB) being fried but not really making it clear to me that that was the problem. I had been using Qubes as my OS but have since gone back to good 'old Linux Mint. I liked Qubes but it's kinda a pain to constantly fuss with allocating the USB drives and I suspect the constant use of my 32GB of RAM to run all the virtual machines therein contributed to the premature death of my RAM cards (~1 yr old).
I build this ROM in the same tree as for my Pixel 7 Pro, so I should continue to make updates going forward for the Pixel 5. I'm planning on adding the Pixel 3XL and OG Pixel ("sailfish") as well, since I own all those phones, too.
Due to this trouble with my PC, the pathways to my keys (the ones you can see in /system/etc/security/otacerts.zip, you can see it includes the entire pathway where the keys are actually located in my PC) changed and I think that's why you have to clear data on this ROM. I'm also using a different Github repo now, too, as part of a rebranding process I'm doing.
Enjoy!
Can we flash this on top of your unbound rom without a factory reset?
screenshots of just some of the features
elong7681 said:
Can we flash this on top of your unbound rom without a factory reset?
Click to expand...
Click to collapse
I dont' know...sorry about that
aleph.mercury said:
I dont' know...sorry about that
Click to expand...
Click to collapse
Thanks for your fast response
elong7681 said:
Can we flash this on top of your unbound rom without a factory reset?
Click to expand...
Click to collapse
Asking the same question. Waiting for brave soul to try it.
saxmydix said:
Asking the same question. Waiting for brave soul to try it.
Click to expand...
Click to collapse
If the worst that could happen is having to factory reset and start over if it doesn't work then I'll give it a shot.
elong7681 said:
If the worst that could happen is having to factory reset and start over if it doesn't work then I'll give it a shot.
Click to expand...
Click to collapse
This is my main and only device, too lazy to backup at this point.
Why another thread? Why just update an old thread. just one question. Bluetooth volume up?
saxmydix said:
This is my main and only device, too lazy to backup at this point.
Click to expand...
Click to collapse
My only device too but I will try it after work
elong7681 said:
My only device too but I will try it after work
Click to expand...
Click to collapse
I just did, update on top of previous without wiping. Working good.
saxmydix said:
I just did, update on top of previous without wiping. Working good.
Click to expand...
Click to collapse
Awesome thanks for letting me know, so to update the rom would I just sideload it in recovery?
saxmydix said:
I just did, update on top of previous without wiping. Working good.
Click to expand...
Click to collapse
Please, cann you try bt headphone volume? On prew build was litlebit low.
got some freezes here and there when adjusting quick settings and had to reboot, but all in all seems to be a nice rom.
only thing i'm missing are advanced navbar settings like "force close active app when holding back-button"
also "connectivity thermal power manager" apparently draws way to much battery
@aleph.mercury I really do enjoy this rom but is there any chance that we can get Now Playing working on this ROM? I tried to enable it through the settings and it does nothing.
elong7681 said:
@aleph.mercury I really do enjoy this rom but is there any chance that we can get Now Playing working on this ROM? I tried to enable it through the settings and it does nothing.
Click to expand...
Click to collapse
I'll look into it. I never tried to use it before, I'll see what I can do
aleph.mercury said:
I'll look into it. I never tried to use it before, I'll see what I can do
Click to expand...
Click to collapse
Thank you
Aospmods magisk module will add some stuff you guys need
[MOD][Xposed+Magisk][13 Compatible] AOSP Mods - System modifications for AOSP-based Android 12+
This is a mixed Xposed+Magisk module, which is made to allow customizations that are not originally designed in AOSP (Android Open Source Project). Features: Currently, AOSP Mods offers customizations on different aspects of system framework and...
forum.xda-developers.com
badaas said:
Aospmods magisk module will add some stuff you guys need
[MOD][Xposed+Magisk][13 Compatible] AOSP Mods - System modifications for AOSP-based Android 12+
This is a mixed Xposed+Magisk module, which is made to allow customizations that are not originally designed in AOSP (Android Open Source Project). Features: Currently, AOSP Mods offers customizations on different aspects of system framework and...
forum.xda-developers.com
Click to expand...
Click to collapse
I want to say that I tried to install it on the unbound evolution x rom and it didn't work I ended up in a bootloop, have you tried it on this rom yet
Edit: It works on this rom
seems that "connectivity thermal power manager" and "com.android.hbmsvmanager" are drawing way to much power. together they drew like 50% and i had to recharge my phone midday, which usually never happens