[UNOFFICIAL] [Q] PixelExperience - Xiaomi Redmi Note 6 Pro ROMs, Kernels, Recoveries,

I have found this beautiful rom and flashed.???
Unless it is your work, do not post without permission.
Per the rules of XDA You must post the Rom and its source code.
Do that and you can post

imonshahed said:
I have found this beautiful rom and flashed.
Everything is work fine and properly???
But I didn't found face unlock here
Otherwise this is perfect
Click to expand...
Click to collapse
Where did you find the ROM?
GApps included? Chrome chrashing or not?
What about GCam?
Is this the latest build?
Is it suitable for a daily driver?

everything is working properly in my daily use..
you can try this
and everything is included

Sir, you are in the wrong section. This is ROMs releases only.

Any bug found?

Gapps included or not?

harsh3172 said:
Gapps included or not?
Click to expand...
Click to collapse
Yes, yes includ

included

no....

this Tulip or twolip channel is dying! This is the most updated, stable rom android Q for tulip devices! Please post the source

imonshahed said:
I have found this beautiful rom and flashed.
Unless it is your work, do not post without permission.
Per the rules of XDA You must post the Rom and its source code.
Do that and you can post
Click to expand...
Click to collapse
post the rom in questions & answer

khoaphm20 said:
post the rom in questions & answer
Click to expand...
Click to collapse
I'm not sure if this is what the OP was talking about but... PixelExperience 10.0 BETA GSI is there. (I'm pretty sure Redmi Note 6 Pro is ARM64 A)
I tried flashing it and but it wouldn't boot, I was using cDroid so I probably need to go back to Xiaomi.eu rom because Cdroid patched vendor... at least I think that is what this guide says I should do and it says to flash Fixzygote_v2 too so I'mg to try it and see if I can get it working.
EDIT: Ok I flashed the PixelExperience 10.0 BETA GSI in TWRP and then Fixzygote_v2 and it booted to setup. I tried to restore my phone from google cloud and after I entered my pin it wouldn't advance so I rebooted the phone. After it rebooted I was able to restore my google cloud backup, no need to flash Gapp and so far the the bugs I've found is the Camera doesn't work and Wifi is doesn't always work... keeps crashing.
Now that I know Fixzygote_v2 is needed I'm goign to try out some Android Q GSI's.

skuly1775 said:
I'm not sure if this is what the OP was talking about but... PixelExperience 10.0 BETA GSI is there. (I'm pretty sure Redmi Note 6 Pro is ARM64 A)
I tried flashing it and but it wouldn't boot, I was using cDroid so I probably need to go back to Xiaomi.eu rom because Cdroid patched vendor... at least I think that is what this guide says I should do and it says to flash Fixzygote_v2 too so I'mg to try it and see if I can get it working.
EDIT: Ok I flashed the PixelExperience 10.0 BETA GSI in TWRP and then Fixzygote_v2 and it booted to setup. I tried to restore my phone from google cloud and after I entered my pin it wouldn't advance so I rebooted the phone. After it rebooted I was able to restore my google cloud backup, no need to flash Gapp and so far the only bug I've found is the Camera doesn't work.. keeps crashing.
Ok and seems like I might have having wifi problems.
Click to expand...
Click to collapse
Yes this rom faced wifi problems, it's not your wifi, it's the rom! It's not the OP meaning but I know it's cool if you post it in questions&answer, in form of a sharing post

khoaphm20 said:
Yes this rom faced wifi problems, it's not your wifi, it's the rom! It's not the OP meaning but I know it's cool if you post it in questions&answer, in form of a sharing post
Click to expand...
Click to collapse
I found https://mirrors.lolinet.com/firmware/gsi/ but haven't flashed any yet I am still downloading them, Seems like Camera and Wifi isn't working on any of the Android 10 roms I've tried so far.
I guess if I get lucky and find one that works I'll share in the questions&answer section if nobody else had yet..

Every single GSI I tried was either too buggy or too big to install.
I went back to Xiaomi.eu because even crDroid had minor bugs that annoyed me.

skuly1775 said:
I'm not sure if this is what the OP was talking about but... PixelExperience 10.0 BETA GSI is there. (I'm pretty sure Redmi Note 6 Pro is ARM64 A)
I tried flashing it and but it wouldn't boot, I was using cDroid so I probably need to go back to Xiaomi.eu rom because Cdroid patched vendor... at least I think that is what this guide says I should do and it says to flash Fixzygote_v2 too so I'mg to try it and see if I can get it working.
EDIT: Ok I flashed the PixelExperience 10.0 BETA GSI in TWRP and then Fixzygote_v2 and it booted to setup. I tried to restore my phone from google cloud and after I entered my pin it wouldn't advance so I rebooted the phone. After it rebooted I was able to restore my google cloud backup, no need to flash Gapp and so far the the bugs I've found is the Camera doesn't work and Wifi is doesn't always work... keeps crashing.
Now that I know Fixzygote_v2 is needed I'm goign to try out some Android Q GSI's.
Click to expand...
Click to collapse
i think OP was talking about the android 10 pixel experience rom in the tulip_updates telegram that rom's link is down tho

martimcavaco said:
i think OP was talking about the android 10 pixel experience rom in the tulip_updates telegram that rom's link is down tho
Click to expand...
Click to collapse
Oh I never used Telegram, I just installed it on windows.
Is this the rom you're talking about? https://t.me/tulipofficial/252341
I'm downloading the Rom now. PixelExperience_twolip-10.0-20191012-1227-BETA-BOOZA.zip
EDIT: I haven't had time to flash it but Thanks for pointing me in the right direction (Telegram).
EDIT2: I'm flashing it now.
EDIT3: I have it on my phone now and so far its working really well... only things I don't like is double-tap to wake doesn't seem to work and with full gesture mode enabled there is still some tiny bar at the bottom of the screen that doesn't see to be able to be disabled
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

check it out in question and answer section

check it out

skuly1775 said:
I found https://mirrors.lolinet.com/firmware/gsi/ but haven't flashed any yet I am still downloading them, Seems like Camera and Wifi isn't working on any of the Android 10 roms I've tried so far.
I guess if I get lucky and find one that works I'll share in the questions&answer section if nobody else had yet..
Click to expand...
Click to collapse
It works for me! The OP posted this rom in Q&A, which let me using havoc 3.0 rom, camera and wifi seems to be ok on this rom using MGC GCAM 6.1.021 BSG mod and nikGAPPS

Related

[ROM] AICP Oreo Edition 13.1 [Unofficial] R7 Plusf (Qualcomm)

AICP Oreo.
................ Old stuff below................
AICP
- also known as Ice Cold Project - is based on LineageOS 14.1, but with a few features added.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install as any other ROM
Below guide is inspired from this CM13 post.
Unlock the Bootloader (Fastboot Mode = Vol. Up + Power)(Command: fastboot oem unlock)
* Flash a custom recovery (Command: fastboot flash recovery name.recovery.img)
Download AICP ROM and Open GApps (ARM64/7.1) and copy to the phone
Reboot to Recovery (Vol. Down + Power)
Do a Full Wipe (will delete everythings so make a copy of your file to the microSD card)
Flash AICP ROM
Flash GApps
Reboot the phone and wait (the first time will take a bit of time)
* Using twrp 3.0.2-0, there will be 2 red error lines when flashing - just ignore.
Credits:
LineageOS for making R7Plus ready for custom ROMs.
The team behind AICP.
omnirom, SlimRoms & probably more.
Source code
AICP
Device source and build guide.
Have fun!​
Very nice to see the R7 Plus get custom ROMS ! Thanks !
rch.aj34 said:
Very nice to see the R7 Plus get custom ROMS ! Thanks !
Click to expand...
Click to collapse
Very nice
---------- Post added at 01:58 AM ---------- Previous post was at 01:56 AM ----------
Very nice:good::good::good:GoodGuide
can not install this rom... wipe-> install from internal or external storage-> twrp display out and no install
pixelfreak
-pixelfreak- said:
can not install this rom... wipe-> install from internal or external storage-> twrp display out and no install
pixelfreak
Click to expand...
Click to collapse
What device?
What recovery?
What was installed previously?
Works perfectly, keep going :victory:
re
teemo said:
What device?
What recovery?
What was installed previously?
Click to expand...
Click to collapse
Oppo R7Plusf... root...Twrp from raymanfx.. first custom flash is with CM13 and BaNks gapps...
CM13 make no install proplems.....
nice to see other devs work for this device
Pixelfreak
-pixelfreak- said:
Oppo R7Plusf... root...Twrp from raymanfx.. first custom flash is with CM13 and BaNks gapps...
CM13 make no install proplems.....
nice to see other devs work for this device
Pixelfreak
Click to expand...
Click to collapse
Looks good to me, even though I don't know the recovery. It should work, since it works for CM13.
However, you can try with the official twrp. That's the one I link to from OP.
guys.,. anyone had time to try it?
on CM13 i'm experiecing problems with AUTO ROTATE screen.. is becoming a bit annoying !
I'd like to know if anyone experienced this problem with this rom, hopefully i'll have time to test it myself in the next days !
thanks
simika said:
guys.,. anyone had time to try it?
on CM13 i'm experiecing problems with AUTO ROTATE screen.. is becoming a bit annoying !
I'd like to know if anyone experienced this problem with this rom, hopefully i'll have time to test it myself in the next days !
thanks
Click to expand...
Click to collapse
@Osleg reported rotating issue in the CM thread. I had it once on this ROM as well.
I was messing with stuff in "Developer options" and at a point the rotation totally broke. I wasn't able to revert the setting, so I flashed the ROM again and have not had the problem again.
I suspect the "Multi window mode" broke it, but it could be other things like a bad behaving theme.
Could you think of any specific changes you have made previous to your broken rotation ?
Aside from that, the build has been stable for me since 22. Feb.
teemo said:
@Osleg reported rotating issue in the CM thread. I had it once on this ROM as well.
I was messing with stuff in "Developer options" and at a point the rotation totally broke. I wasn't able to revert the setting, so I flashed the ROM again and have not had the problem again.
I suspect the "Multi window mode" broke it, but it could be other things like a bad behaving theme.
Could you think of any specific changes you have made previous to your broken rotation ?
Aside from that, the build has been stable for me since 22. Feb.
Click to expand...
Click to collapse
I didn't make any significant change in &"developer" section and for sure I didn't touch the multi window thing.. yesterday I installed the new nightly but I still have same issue.. did you activate again developers mode?
Sent from my R7plusf using Tapatalk
simika said:
I didn't make any significant change in &"developer" section and for sure I didn't touch the multi window thing.. yesterday I installed the new nightly but I still have same issue.. did you activate again developers mode?
Sent from my R7plusf using Tapatalk
Click to expand...
Click to collapse
Thanks. There may be something here on CMs Gerrit. We are not alone. Im thinking our v3.10 kernel or the vendor blobs are not yet able to cope 100% with MM and need some workarounds.
It will be fixed.
Installed and loving it, great rom compliments to the dev.
Is it possible to move apps to micro sad card if so how or if not is it on th to do list.
Cheers.
Fantastic and very fast ROM
question 1st. which is the theme OP is displaying
2nd. how to remove google bar from the screen?
2007jchill said:
Installed and loving it, great rom compliments to the dev.
Is it possible to move apps to micro sad card if so how or if not is it on th to do list.
Cheers.
Click to expand...
Click to collapse
Thanks.
I don't know about moving apps yet. But you should be able to format the sdcard as ext4 and use it as internal data. I think you get the option to chose the first time you mount the sdcard. I'm sure there is a guide somewhere
jacktackle said:
Fantastic and very fast ROM
question 1st. which is the theme OP is displaying
2nd. how to remove google bar from the screen?
Click to expand...
Click to collapse
1. DarkSideOrange theme. One of many variants: http://youtu.be/l5wuc7bKO-o
2. Long press an empty area of the screen, chose settings. Disable search bar.
This rom is only getting better and better.
Latest build outstanding.
Cheers
Ok 6.x.x Google camera video mode force closes. But the 5.x.x.x version works perfectly. Appreciate it if you have any ideas.
Cheers
2007jchill said:
This rom is only getting better and better.
Latest build outstanding.
Cheers
Click to expand...
Click to collapse
Thanks. There are some improvements in next build, like fixing clock settings fc.
2007jchill said:
Ok 6.x.x Google camera video mode force closes. But the 5.x.x.x version works perfectly. Appreciate it if you have any ideas.
Cheers
Click to expand...
Click to collapse
I can't even find the Google cam, do you have a link to the app. Or do you mean build in camera?
teemo said:
Thanks. There are some improvements in next build, like fixing clock settings fc.
I can't even find the Google cam, do you have a link to the app. Or do you mean build in camera?
Click to expand...
Click to collapse
Just got the latest from apkmirror once installed it shows in play store then when you uninstall on play store you get the option to install the 5.x.x version which works fine. I think the 6.x.x version is for the nexus at the moment.

LineageOMS 14.1 [Substratum] [NIGHTLY]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OMS supported LineageOS version. You can use them by downloading Substratum from Google Play.
What's working :
Boots
Wifi
Bluetooth
Camera ( Videos And Photos )
Video Playback
Audio ( Record and Playback )
Sensors
GPS
What's not working:
Please tell me.
Instructions :
Download the latest build and gapps
Reboot to recovery
Flash the latest build and gapps
Reboot
Downloads :
Builds : https://www.androidfilehost.com/?w=files&flid=181589&sort_by=date&sort_dir=DESC
Root addon : https://download.lineageos.org/extras
Google Apps : http://opengapps.org/?arch=arm64&api=7.1
XDA:DevDB Information
LineageOMS 14.1, ROM for the Xiaomi Mi Mix
Contributors
Cenkay, asderdd, pappschlumpf, LuK1337, luca020400, bgcngm, h2o64
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Created 2017-05-18
Last Updated 2017-05-18
Hi Cenkay, thanks for the rom. I guess this is based on the new device tree so it should have the same bugs as RR.
There have been some complains about the proximity sensor. They say that (when the phone is locked) and you receive a phone call, the proximity sensor doesn't work and the screen would stay on during the entire call. So If someone could test because I'm currently testing private RR builds. And i need more time to test and reproduce the issue. Can't really test both the same time. Anyways, Thanks again Cenkay!.
Sent from my MI Mix using Tapatalk
Thanks a lot @Cenkay
Which root do they offer?
Magisk also is possible?
mohammed510 said:
Hi Cenkay, thanks for the rom. I guess this is based on the new device tree so it should have the same bugs as RR.
There have been some complains about the proximity sensor. They say that (when the phone is locked) and you receive a phone call, the proximity sensor doesn't work and the screen would stay on during the entire call. So If someone could test because I'm currently testing private RR builds. And i need more time to test and reproduce the issue. Can't really test both the same time. Anyways, Thanks again Cenkay!.
Sent from my MI Mix using Tapatalk
Click to expand...
Click to collapse
Now there are reports that it is not working if you make a call yourself. And that it works if a call comes in screen off. Both situations work without problems on my phone. Proximity is fine. So there's nothing to do. The proximity is a little slow, so it sometimes happens that you pulldown statusbar. But screen and digitizer are off during call. Always on my device. @mohammed510 on your phone it is fine too, right?
Gesendet von meinem MI Mix mit Tapatalk
pappschlumpf said:
Now there are reports that it is not working if you make a call yourself. And that it works if a call comes in screen off. Both situations work without problems on my phone. Proximity is fine. So there's nothing to do. The proximity is a little slow, so it sometimes happens that you pulldown statusbar. But screen and digitizer are off during call. Always on my device. @mohammed510 on your phone it is fine too, right?
Gesendet von meinem MI Mix mit Tapatalk
Click to expand...
Click to collapse
I'm using the latest private build and no problems here with proximity. I have tried many scenarios but couldn't find the problem. maybe user error? And For me, the proximity is not slow. It's normal, just like any other phone i used before.
Sent from my MI Mix using Tapatalk
The proximity issue turned out to be a user error. Other than this, everything else seems to be working fine here.
Better to remind users to do a clean install before reporting bugs to avoid wasting time. Thanks.
Sent from my MI Mix using Tapatalk
I will try this. Can you tell me if this passes safetynet without installing magisk?
Too many variables to call it a bug.. but I dirty flashed this over the latest LOS from pappschlumpf, then flashed the SchlumpfKernel 1.02 and didn't make it passed the boot-loader. Anyone else?
blinksilver said:
Too many variables to call it a bug.. but I dirty flashed this over the latest LOS from pappschlumpf, then flashed the SchlumpfKernel 1.02 and didn't make it passed the boot-loader. Anyone else?
Click to expand...
Click to collapse
Yes, the dev himself. The kernel needs a recompile to work again. Use included kernel until i push an update, please.
I can't get fingerprint sensor to work. I may have installed it wrong though. My previous rom was an old EPIC version (android 6.x). I wiped system, caches and data, and installed rom + gapps using twrp. Is there anything else I should do?
Alxandr said:
I can't get fingerprint sensor to work. I may have installed it wrong though. My previous rom was an old EPIC version (android 6.x). I wiped system, caches and data, and installed rom + gapps using twrp. Is there anything else I should do?
Click to expand...
Click to collapse
Are you able to get it to boot? You're the first one who has reported it being bootable
It booted just fine. It may be cause of other things I flashed though. Also I got fingerprint sensor to work . In case someone are interested this is the order I did things in:
1. Start with old EPIC rom (don't remember which one. Installed in January or February).
2. Wipe system, data and cache.
3. Flash RR rom. - Fingerprint sensor didn't work.
4. Wipe system, data and cache.
5. Flash linage (from this thread). - Fingerprint sensor didn't work.
At this point I figured flashing (even after wiping system) didn't clear everything, and I read something in the RR thread about needing MIUI dev rom before flashing RR for things to work so I did this:
1. Download and flash Chinese (not global) dev rom (latest atm is v7.5.11).
2. Boot phone. - this will remove TWRP or any other custom recovery.
3. Flash TWRP from fastboot.
4. Wipe System, data and cache.
5. Flash RR + gapps + magisk.
6. Profit.
Granted, I'm now running RR, but from what I saw this should likely work with lineage too. Hopefully someone finds this helpful
I dont find Fingerprint in setting
I guess it's using the newest version of Pappschlumpf's device tree and vendor, or do u use a personal one?
And do u use any other toolchain then the standard one?
If u need help in changing the toolchain or any other question feel free to hit me up.
its a nice rom have a good day sir
All is running fine...
vergilbt said:
All is running fine...
Click to expand...
Click to collapse
Same
skittishwind said:
I dont find Fingerprint in setting
Click to expand...
Click to collapse
Flash fastboot global stable rom, and install this rom.
Cenkay said:
Flash fastboot global stable rom, and install this rom.
Click to expand...
Click to collapse
Hmm, i would recommend china dev
In Korea, when you use the " Lineage OS ", your phone number and my phone number are
In Korea, when you use the " Lineage OS ", your phone number and my phone number are displayed together.
Ex) 0104444444401055555555
I hope this error fixes quickly.

[ROM][New][Unofficial] OpenKirin's LineageOS 14.1 for Honor 8

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Latest update: June 29th 2017​
Disclaimer:
Altough we are working hard to deliver a bug-free rom, things may break and we are not responsible if something goes wrong and your hardware becomes damaged or if you have any problem, you are taking a risk flashing roms.
Hi, so you might wonder why the other thread got closed and what's all of this about. Well, the answer is that now I'll be maintaining this rom while Surdu will take care of Resurrection Remix, the rom is the same and you can flash this builds without wiping if you had the 'older' rom.
Instructions:
If you come from stock EMUI 5.0:
Install TWRP (Available in this subforum)
Format data
Flash vendor.zip
Flash LineageOS's zip
If you already have LineageOS:
Flash LineageOS's zip
Downloads:
Find them in this DevDB project section called 'Downloads' (you might need to use a computer)
Bugs:
Encryption
Changelog:
Code:
01/06/2017 - Fixed random reboot issue
01/06/2017 - Added loop support
29/06/2017 - Fixed tethering
29/06/2017 - Fixed shaky camera
29/06/2017 - Updated Lineage source
Asking for help...
There are still some little bugs to fix and things will break from time to time, so in order to properly help you and keep the thread organized every help petition should include:
Brief description of the issue
A way to replicate it
Screenshots/Logs
Without that information, your post will be futile so please meet those easy conditions and try to keep the thread clean!
Last but not least, thanks to the whole OpenKirin team (@surdu_petru @OldDroid) for their amazing job at keeping updated roms for kirin devices as well as helping with this one.
XDA:DevDB Information
LineageOS 14.1 for Honor 8, ROM for the Honor 8
Contributors
XePeleato, surdu_petru, OldDroid
Source Code: https://github.com/OpenKirin
ROM OS Version: 7.x Nougat
ROM Firmware Required: EMUI 5.0
Based On: LineageOs
Version Information
Status: Stable
Created 2017-06-01
Last Updated 2017-06-30
Going to try it these days. Thanks
I see vendor.zip only in Downloads section
Yeah only vender.zip is in the download section, there's no Lineage zip
morpheus302 said:
I see vendor.zip only in Downloads section
Click to expand...
Click to collapse
Gus194 said:
Yeah only vender.zip is in the download section, there's no Lineage zip
Click to expand...
Click to collapse
Please be patient, it's coming very soon
Thank you for understanding !
I'm bit confused. So where is the download section?
Found it

			
				
Sorry about that, there must be a problem with XDA servers, it's taking more than an hour to upload! And unfortunately I couldn't upload it without posting the DevDB thread, if it keeps working like that I'll find a more reliable storage solution.
I am really sorry! Check back in 5 minutes or so
Very nice job, and happy you fixed the issue. I'll set it as my daily driver once everything's OK
So what exactly caused the issues ? I'm curious as to whether it could have been solved on our own (i do say without Huawei's kind but forced operations).
And what do we do with that vendor.zip ? Flash it on top of Lineage's original Vendor package ?
(EDIT : Check post on top, the joys of cross-posting )
Still, thank you immensely on behalf of all the community
DJ Daemonix said:
So what exactly caused the issues ? I'm curious as to whether it could have been solved on our own (i do say without Huawei's kind but forced operations).
Click to expand...
Click to collapse
Hi, the problem was that a driver introduced by Huawei checked the time that it takes to boot (running in a kthread), if it takes more than three minutes it reboots to eRecovery, but it looks like it waits for a signal from userspace to check if it booted (like, write 1 to /sys/.... Whenever it boots).
We were actually aware of this being the issue, and tried to avoid it by editing the function's code (ARM64 instructions because we had no source (By filling the function with NOP or returning 0)) but we didn't succeed at first and thought that the kernel release was near so it made no sense to keep wasting time on it, if you want to see more details just go to github and check what we did, I hope that you understood the explanation.
Thanks for your kind words!
EDIT: The rom is up, you can download it now.
The Lineage zip file has uploaded! Thanks again for all your guys work.
Thx for your job. I'll now have to unlock the bootloader and start flashing. Two questions: can I lock the bootloader again once I installed LOS? Do i need to install twrp or is it enough to just boot it for installation?
faeArai said:
can I lock the bootloader again once I installed LOS?
Click to expand...
Click to collapse
Not at all, you need to be on EMUI in order to relock it. (You can if you go back to EMUI but I think that you asked if you could do that while you are on LineageOS).
faeArai said:
Do i need to install twrp or is it enough to just boot it for installation?
Click to expand...
Click to collapse
TWRP is just needed to format data and install the ROM, there's no need to keep it after installing the ROM.
What issues, if any, are present? Does the dual camera work? FPS fully functional along with gestures? Thanks
NeophyteGS2 said:
What issues, if any, are present?
Click to expand...
Click to collapse
Encryption
NeophyteGS2 said:
Does the dual camera work?
Click to expand...
Click to collapse
I am not sure about that, I think it does because that's coded into the HAL and we are using the one from Huawei.
NeophyteGS2 said:
FPS fully functional along with gestures? Thanks
Click to expand...
Click to collapse
It works well but the gestures are not included by now, maybe in the next release.
XePeleato said:
Encryption
I am not sure about that, I think it does because that's coded into the HAL and we are using the one from Huawei.
It works well but the gestures are not included by now, maybe in the next release.
Click to expand...
Click to collapse
Fantastic, thanks for the quick response. I'll test it out later and reply with feedback after a week or so
NeophyteGS2 said:
What issues, if any, are present? Does the dual camera work? FPS fully functional along with gestures? Thanks
Click to expand...
Click to collapse
I do not want to be rude, but if you want a personalized rom, based LOS or AOSP with fully dual camera support and FPS gesture, you better stay on stock EMUI
does the rom supports volte?if no please add that feature..this is the one con to make it as my daily driver
---------- Post added at 07:20 PM ---------- Previous post was at 07:20 PM ----------
thanks for your hardwork :good:
Where can I download this?
XePeleato said:
TWRP is just needed to format data and install the ROM, there's no need to keep it after installing the ROM.
Click to expand...
Click to collapse
What about updates? Do I need TWRP for (OTA-LOS) updates?

[ROM][10][SAKURA] Pixel Experience [OFFICIAL][AOSP]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Sakura
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
Facelock
Known issues
Nothing
DON'T FLASH GAPPS, ALREADY INCLUDED
Download from Pixel Experience website
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog​
Build author/Device Maintainer: ZIDAN44
Device Source code: https://github.com/PixelExperience-Devices
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
​
XDA:DevDB Information
Pixel Experience ROM For The Xiaomi Redmi 6 Pro
Contributors
Zidan44,RevanthTolety
ROM OS Version: Android 10
Version Information
Status: Beta
Created 2019-09-23
Last Updated 2019-09-23
Reserved
Time For Update 10
ChangeLog :
*First Beta Build Of Android 10
Important: You Must Have To Use SAR TWRP-Twrp for system-as-root builds(won't work with pie builds)
Amazing work! I Will probe ir as soon as posible!
If am flash this... The can i revert back to pie miui 10 or pe pie again without any issues
volte issue
volte wont work how to solve
Yuvraj sing said:
volte wont work how to solve
Click to expand...
Click to collapse
Volte enabled inbuilt... But only OUTGOING is not work... INCOMING is work great....
Do I need to install lazyflasher before flashing this ROM? My phone gets into bootloop and is stuck at the Google logo. Please help.
Imthi Az said:
Volte enabled inbuilt... But only OUTGOING is not work... INCOMING is work great....
Click to expand...
Click to collapse
[EDITED] Gonna wait until the VoLTE issue gets fixed. Thanks @ZIDAN44 for porting so many amazing ROMs for Sakura specially OOS.
It's initial build ofc there will be no proper support at start
Success but my phone always suddenly shutdown automatically. How to FIX.
before flashing I am using MIUI stable v10.3.3.0 and TWRP V 3.3.
Azamsm said:
Why all the Android Q ROMs and GSIs for Sakura have VoLTE issues. I had download the ROM but now I think I should wait a bit more. What is the use of a phone when can't phone someone!
Click to expand...
Click to collapse
Ur saying right i downloaded all the android Q rom but in all roms LTE problem is their. Plzz fix this rom developers as fast as possible.
Azamsm said:
Why all the Android Q ROMs and GSIs for Sakura have VoLTE issues. I had download the ROM but now I think I should wait a bit more. What is the use of a phone when can't phone someone!
Click to expand...
Click to collapse
Its a initial build... U should happy for having a Android10 now... Wait for the next update... Our devs are working good for our sakura...
mithu.prince said:
Ur saying right i downloaded all the android Q rom but in all roms LTE problem is their. Plzz fix this rom developers as fast as possible.
Click to expand...
Click to collapse
Yes you guys are right .Developer's are your employee,You pay them right.
Respect for what you got.
artroeb89 said:
Success but my phone always suddenly shutdown automatically. How to FIX.
before flashing I am using MIUI stable v10.3.3.0 and TWRP V 3.3.
Click to expand...
Click to collapse
Yes, same problem. Can anyone please help with this issue. I made a clean install and used the recommended TWRP version.
deepak kumar android said:
Yes you guys are right .Developer's are your employee,You pay them right.
Respect for what you got.
Click to expand...
Click to collapse
Ur ryt bro
U all guys r using ROM without donating so plz be patient it will be fix
---------- Post added at 04:53 AM ---------- Previous post was at 04:51 AM ----------
abyshek said:
Yes, same problem. Can anyone please help with this issue. I made a clean install and used the recommended TWRP version.
Click to expand...
Click to collapse
Reflash the software without formatting just dirty flash it may get fixed if not fixed u have to flash a zip to fix that
Swarajj said:
Ur ryt bro
U all guys r using ROM without donating so plz be patient it will be fix
---------- Post added at 04:53 AM ---------- Previous post was at 04:51 AM ----------
Reflash the software without formatting just dirty flash it may get fixed if not fixed u have to flash a zip to fix that
Click to expand...
Click to collapse
Which zip do I have to flash to fix random shutdowns?? Thanks for your help.
Swarajj said:
Reflash the software without formatting just dirty flash it may get fixed if not fixed u have to flash a zip to fix that
Click to expand...
Click to collapse
Try reflash without format still problem random shutdown.
Which version of TWRP is correct. TWRP with system partition or TWRP with system-root partition?
mithu.prince said:
Ur saying right i downloaded all the android Q rom but in all roms LTE problem is their. Plzz fix this rom developers as fast as possible.
Click to expand...
Click to collapse
Donate money to dev and he will fix it asap.
Guys like you should understand that dev is also a human like you and me and he also have a personal life instead of all of this things and most importantly he is doing this out of his own interests not for anyone like you and me. So please be sincere of what you are saying and chose your words wisely.
If you have suddenly power off
First at all, install SAR recovery. Then copy you PE 10 at USB OTG FLASH. Open Advanced wipe, and wipe all except cust, otg and micro sd. Come back to main menu recovery and click on advanced wipe again. Now you can see system_as_root. Wipe again all, except.... And install PE normally. It ok, now you phone will not reboot.

[CLOSED][ROM][12][Xiaomi Mi A2] PixelExperience [AOSP]

Moderator Edit: Use this most recent thread for all versions of this ROM -> [ROM][12][Xiaomi Mi A2] PixelExperience [AOSP] [jasmine_sprout]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Xiaomi Mi A2 [jasmine_sprout]
What is this?
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 12
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
WFD
Fingerprint reader
Face unlock (Will be added soon)
Lights
Sound/vibration
Install Instructions
Screenshots
MUST READ
For gcam
Known issues
Nothing yet
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download PixelExperience
Donate
Liked my work? Give me a beer
UPI :- [email protected]
Translation
Help with project translation
Stay tuned
My Telegram channel
My Telegram group
My blog​
Android OS version: 12
Security patch level: December 2021
Build author/Device Maintainer: Immanuel Raj
Kernel source code: https://github.com/PixelExperience
Source code: https://github.com/iamimmanuelraj/android_kernel_xiaomi_jasmine_sprout/tree/wcs
ROM Developer: jhenrique09
RESERVED
How's the stability and performance? Does encryption work? I've always liked this ROM and I want to install it to extend the life of the phone.
fdgd1998 said:
How's the stability and performance? Does encryption work? I've always liked this ROM and I want to install it to extend the life of the phone.
Click to expand...
Click to collapse
Good day! the firmware is extremely unstable. the phone application exits with an error every couple of minutes. Google play services also stop working every 5 minutes ...
KOJl6ACEP said:
Good day! the firmware is extremely unstable. the phone application exits with an error every couple of minutes. Google play services also stop working every 5 minutes ...
Click to expand...
Click to collapse
After posting I decided to try the ROM. I've got no problems at all. I've been using for one hour doing the configuration and installing all my apps.
Everything's going perfect so far.
fdgd1998 said:
After posting I decided to try the ROM. I've got no problems at all. I've been using for one hour doing the configuration and installing all my apps.
Everything's going perfect so far.
Click to expand...
Click to collapse
I've been using the rom for about a day and it's been great so far. Performance is great and I haven't had any app crashes. The only problem I have with it is that you don't get free google photos storage (it just says backup complete). I don't know if that's a bug or it's supposed to work like that but free storage was available in the alpha build...
KOJl6ACEP said:
Good day! the firmware is extremely unstable. the phone application exits with an error every couple of minutes. Google play services also stop working every 5 minutes ...
Click to expand...
Click to collapse
Nothing like that here.. do log it and send with proper logs and bug report else please dont say blank like this . No one has said so...Also i have tested it numerous times before release so i dont think what you are saying is true
VladaDj said:
I've been using the rom for about a day and it's been great so far. Performance is great and I haven't had any app crashes. The only problem I have with it is that you don't get free google photos storage (it just says backup complete). I don't know if that's a bug or it's supposed to work like that but free storage was available in the alpha build...
Click to expand...
Click to collapse
Hey ! good day. I added some code in the source side to make it work but then on/after december patch it doesnt work..seems like google patched it so idk ...if any other fix is availabe for it i will make sure to ship it with a feature update or monthly update
Immanuel Raj said:
Hey ! good day. I added some code in the source side to make it work but then on/after december patch it doesnt work..seems like google patched it so idk ...if any other fix is availabe for it i will make sure to ship it with a feature update or monthly update
Click to expand...
Click to collapse
I have also noticed that in some places (like when installing apps from the play store website on PC) the phone is seen as a Google pixel 6 pro witch could be causing the problem if Google photos also thinks it is a pixel 6 because the pixel 6 series doesn't get free storage
Hi. Rom seems great and stable.
But i have found 3 issues..
1. Its seems online as Pixel 6 pro.
2. In camera app there is no settings.
3. In camera app flash is not working at all.
Any idea?
Thanks,
M
miklosK said:
Hi. Rom seems great and stable.
But i have found 3 issues..
1. Its seems online as Pixel 6 pro.
2. In camera app there is no settings.
3. In camera app flash is not working at all.
Any idea?
Thanks,
M
Click to expand...
Click to collapse
1. Its due to the rom's source patches/works
2. It is there. Please do check well (swipe left/right)
3.Yes. It is a source side error.I check in other app like google lens and stuff and it works . Hopefully it will be fixed in future
Hello and have a nice day
I have two problems with this ROM
1. Using two SIM cards, the antenna of the phone is disturbed and I am constantly losing the antenna
2. The phone is not connected to the computer to transfer the file. I tried with Windows 11
Hey, thank you for this ROM.
Can I dirty flash this as an update to "[ROM][ALPHA][12][Xiaomi Mi A2/jasmine_sprout] Pixel Experience [AOSP]?
edit: Guess not, should have read the "MUST READ"
Have been using this ROM for about 6 hours now. Everything is working like charm (Kudos to everyone associated).
However, sometimes, mobile network gets lost (goes into a loop of going off and coming back...) This gets resolved if we switch off the location. Is it just me facing this issue?
I installed the ROM yesterday and so far it is working great except "4G Calling" which I had to deactivate to be able to make phone calls (incoming audio was heavily garbled while outgoing audio was just noise).
Hey, love your work. can you tell me how the battery performnce is
Hello
I am trying to flash this rom but it is impossible. I have done everything to the letter, the wipes and reboots, and I always remain in bootloop. I have restored 5 times my device to the stock rom and I have done the procedures of different tutorials and nothing.
I also tried adb.
I am using twrp 3.6.0_9-0 because OrangeFox is also in bootloop.
pls help!
Happy 2K22
Google Traductor *-*
excuse the copy / paste
BusterCL said:
Hello
I am trying to flash this rom but it is impossible. I have done everything to the letter, the wipes and reboots, and I always remain in bootloop. I have restored 5 times my device to the stock rom and I have done the procedures of different tutorials and nothing.
I also tried adb.
I am using twrp 3.6.0_9-0 because OrangeFox is also in bootloop.
pls help!
Happy 2K22
Google Traductor *-*
excuse the copy / paste
Click to expand...
Click to collapse
I also had problems installing it, try to acceed to the fastboot and boot twrp 3.6 img, wipe everything in the 2 sides and then reboot again to the fastboot, acceed to the twrp 3.6 and install the new version. If this doesn't work, do the same process but instead of install the new version first install the alpha and then the new one.
Hope that helps
amardgod said:
Hey, love your work. can you tell me how the battery performnce is
Click to expand...
Click to collapse
Good but i can't tell the real consumption because i have like a 72% real battery life hehehe
rabisa47 said:
Good but i can't tell the real consumption because i have like a 72% real battery life hehehe
Click to expand...
Click to collapse
mine is the same

Categories

Resources