Database Info

Pre-Rooted Boot Image for Nokia NB1 v4.88B for Unlocked Nokia 8

Enjoy the latest beauty with root.
To root your phone using Magisk,
1) Enable "USB Debugging"
2) Install MagiskManager
3) Download patched boot image from https://mega.nz/#!WZhCFIoT!ddpaDe-3XF_Ozj4UIVZkCS2MZ3Si-rEEQ8jSMTwtAHw
[ New Image Provided by @Trissi - Test Required : https://mega.nz/#!YBJ3HYAC!4NSCKVGLveXTgvloj--K_CzghyL33Zd1aGz_2TPRClw ]
4) Run "adb reboot bootloader"
5) Type "fastboot boot NB1_4.88B_Rooted_Magisk.img" from same folder where downloaded that img file. [ Don't FLASH it. It will break your WiFi !!! ]
6) Let it boot, and then Open MagiskManager --> Install --> Direct Install.
Once install is done, reboot normally. And - voila - you have MagiskRooted NOKIA 8 ( NB1 )
P.S: For TWRP based on v4.88B - check https://forum.xda-developers.com/nokia-8/development/unofficial-twrp-based-v4-88b-wifi-t3802333.

If I'm already on a Magisk-rooted TA-1004 (March 1 Security patch), Build 00WW_4_84A_SP01,
do I need to just go through steps 3-5?
(p.s. it won't erase any data on the phone, right?)

1st update to the latest v4.88B . Then follow 1-5

bidhata said:
Enjoy the latest beauty with root.
To root your phone using Magisk,
1) Enable "USB Debugging"
2) Install MagiskManager
3) Download patched boot image from deleted
3) Run "adb reboot bootloader"
4) Type "fastboot boot NB1_4.88B_Rooted_Magisk.img" from same folder where downloaded that img file. [ Don't FLASH it. It will break your WiFi !!! ]
5) Let it boot, and then Open MagiskManager --> Install --> Direct Install.
Once install is done, reboot normally. And - voila - you have MagiskRooted NOKIA 8 ( NB1 )
P.S: Please put hand together for a working TWRP.
Click to expand...
Click to collapse
1
2
3
3
4
5
Nice count :fingers-crossed:
PS: Ty for the boot image

erik128766 said:
1
2
3
3
4
5
Nice count :fingers-crossed:
PS: Ty for the boot image
Click to expand...
Click to collapse
Lol - fixed.

Wifi ok after it action?
And I can install SP w/o error?

head66 said:
Wifi ok after it action?
And I can install SP w/o error?
Click to expand...
Click to collapse
Don't flash it - expected wifi will not work. Rather use it to boot your device from fastboot, then use MagiskManager to patch your own boot partition. Previously SP updated worked well ( SP1 --> SP2 ) . But not sure about future update. Though - we will find-out a way together

Thank you so much.

I have an unlocked bootloader and a root via Magisk. How to prepare the device for updating OTA?

Nice. It work perpectly

bidhata said:
Enjoy the latest beauty with root.
To root your phone using Magisk,
1) Enable "USB Debugging"
2) Install MagiskManager
3) Download patched boot image from https://mega.nz/#!WZhCFIoT!ddpaDe-3XF_Ozj4UIVZkCS2MZ3Si-rEEQ8jSMTwtAHw
4) Run "adb reboot bootloader"
5) Type "fastboot boot NB1_4.88B_Rooted_Magisk.img" from same folder where downloaded that img file. [ Don't FLASH it. It will break your WiFi !!! ]
6) Let it boot, and then Open MagiskManager --> Install --> Direct Install.
Once install is done, reboot normally. And - voila - you have MagiskRooted NOKIA 8 ( NB1 )
P.S: For TWRP based on v4.88B - check https://forum.xda-developers.com/nokia-8/development/unofficial-twrp-based-v4-88b-wifi-t3802333.
Click to expand...
Click to collapse
My device is not detected in CMD for adb devices. I remembered I have installed the driver. Does updating the firmware to latest June Security patch make it undetected? Is there anyone having the latest driver? My phone can't go into bootloader if it can't detect in CMD.

Look under developer settings if USB debugging is on
Powered by View 10

2WildFirE said:
Look under developer settings if USB debugging is on
Powered by View 10
Click to expand...
Click to collapse
It is on of course. Else, why would I ask in here? hehehe

Wifi is broken with 4.88B SP1, how can I downgrade to 4.88B?

On my Device it have work.
But i have the TWRP in the Boot_a. how i can delete this?

chris.aus.at said:
On my Device it have work.
But i have the TWRP in the Boot_a. how i can delete this?
Click to expand...
Click to collapse
OK i have found a way.

If anyone has problem when root 4.88B June Security Patch, or doesn't have Direct Install option, this is what I have done to get rooted:
1. Enable "USB Debugging"
2. Download MagiskManager and Magisk zip, copy to phone but DO NOT install
3. Download patched boot image by @bidhata, copy to adb folder
4. Open CMD from adb folder and run "adb reboot bootloader"
5. Run "fastboot boot NB1_4.88B_Rooted_Magisk.img"
6. Let it boot, you will see wifi is broken (it's ok) and then install MagiskManager --> Add Magisk zip to Module --> Reboot when installation finishes.
After reboot the phone still has root and wifi working normally. Good luck!

hot to fix
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

iyadengle said:
hot to fixView attachment 4539271
Click to expand...
Click to collapse
You must unlock the Bootloader

iyadengle said:
hot to fixView attachment 4539271
Click to expand...
Click to collapse
Pre-Rooted Boot Image for Nokia NB1 v4.88B for Unlocked Nokia 8

[Recovery] TWRP 3.2.2.0 for redmi 6 pro ( sakura )

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IM NOT THE CREATOR OF THIS TWRP, FOUND IT SPMEWHERE AND WANTED TO SHARE IT​
installation:
1. Setup ADB/Fastboot
2. Download the twrp from here : download
3. Power off your device.
4. Hold volume down + power button to boot into the bootloader.
5. Connect your device to your PC with a USB cable.
6. Open the command prompt on your PC.
7. Type cmmand : fastboot flash recovery "filename of recovery.img"
done
If u have anti rollback enabled :
first method:
fastboot boot "recovery.img"
in that booted twrp recovery flash twrp .img again and it will work
2nd method:
fastboot flash antirbpass "recovery.img"
changelog:
What's new in 3.2.2-0:
* adb backup fixes
* OTA style update zips will now install automatically without prompting for decrypt
* minor tweaks to handling date/time on Qualcomm devices
* updates to some language translations
for further questions and discussion join telegram group here

nofx161 said:
IM NOT THE CREATOR OF THIS TWRP, FOUND IT SPMEWHERE AND WANTED TO SHARE IT​
installation:
1. Setup ADB/Fastboot
2. Download the twrp from here : download
3. Power off your device.
4. Hold volume down + power button to boot into the bootloader.
5. Connect your device to your PC with a USB cable.
6. Open the command prompt on your PC.
7. Type cmmand : fastboot flash recovery "filename of recovery.img"
done
changelog:
What's new in 3.2.2-0:
* adb backup fixes
* OTA style update zips will now install automatically without prompting for decrypt
* minor tweaks to handling date/time on Qualcomm devices
* updates to some language translations
for further questions and discussion join telegram group here
Click to expand...
Click to collapse
C : \ adb> fastboot flash recovery sakura . img
sending 'recovery' (47604 KB)...
OKAY [ 1.562s]
writing 'recovery'...
FAILED (remote: rollback version downgrade)
finished. total time: 1.578s

evl01 said:
C : \ adb> fastboot flash recovery sakura . img
sending 'recovery' (47604 KB)...
OKAY [ 1.562s]
writing 'recovery'...
FAILED (remote: rollback version downgrade)
finished. total time: 1.578s
Click to expand...
Click to collapse
fastboot boot "recovery.img"
in that booted twrp recovery flash twrp .img again and it will work
u can aso try : fastboot flash antirbpass "recovery.img"

nofx161 said:
fastboot boot "recovery.img"
in that booted twrp recovery flash twrp .img again and it will work
u can aso try : fastboot flash antirbpass "recovery.img"
Click to expand...
Click to collapse
Now is asking for a password to decrypt. What should I put there?
---------- Post added at 10:53 PM ---------- Previous post was at 10:48 PM ----------
evl01 said:
Now is asking for a password to decrypt. What should I put there?
Click to expand...
Click to collapse
When I put cancel, I can enter to recovery but I can't use any storage. It's 0mb

If you factory reset through twrp and reboot recovery it should be OK. But keep in mind to do a backup of your stuff first.

Hello,
TWRP is released under GPLv3+. It means that if you submit a build of TWRP, you need to distribute its source code and instructions to build it.
Where did you find this build if you "found it somewhere and wanted to share it"? You are basically violating the license by just "sharing" it.
Read the pinned post for more information (applies to GPLv2 like GPLv3).

nofx161 said:
fastboot boot "recovery.img"
in that booted twrp recovery flash twrp .img again and it will work
u can aso try : fastboot flash antirbpass "recovery.img"
Click to expand...
Click to collapse
Thanks for the information, I lost connection with terminal after booting into TWRP, and didn't know what to do next as TWRP was o MB .
And terminal showed "FInished" with no error in your second command, but twrp was still not installed after holding down power + volumn down. :/
Is there anything i did wrong? Please reply Mr.Sakura

How to check if anti rollback is enabled?

Fastboot getvar anti

It just says anti: and no number. What does this means?

Mine shows the same so I think there is no anti rollback on our 2 devices.

mine also says "anti"..no number

Please be careful while flashing recovery that are found "somewhere".

Well, after flashing latest miuipro still anti with no count

Please delete this thread! False information!

any solution it is show 0mb internal

Do a factory reset in twrp or flash disable encryption.zip

forum.xda-developers.com/redmi-6-pro/development/recovery-twrp-v3-2-x-redmi-6-prosakura-t3851959
Check my post in above link

Doubt
coolek33 said:
If you factory reset through twrp and reboot recovery it should be OK. But keep in mind to do a backup of your stuff first.
Click to expand...
Click to collapse
How will i access the internal storage later if i format it totally ???

You will access it but it will be empty. So U can use sd card/usb otg for flashing

[Official][Recovery]TWRP for the Huawei Y3 2017 CRO-U00

TeamWin Recovery Project 3.2.3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING #1: Unlocking BL and flashing a custom recovery voids your warranty. Please make sure to contact your carrier/seller if your phone is still under warranty after unlocking the bootloader.
WARNING #2: Make sure you have enabled OEM unlock and unlocked bootloader before trying to flash this. How you can successful root and install TWRP will be described below.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
HOW-TO UNLOCK BOOTLOADER
1. Get bootloader Unlock code here
2. Install minimal adb and fastboot
3. Plug in your phone and make sure all huawei drivers got installed
4. Enable developer options in settings as described above.
5. Enable OEM unlock, enable USB debugging (both in developer options)
6. Open the adb tool you installed recently
7. Type fastboot devices (now a device number should show up)
8. Type fastboot reboot-bootloader (your phone will now boot into bootloader, if not, you haven't set up drivers or adb/fastboot correctly)
9. This step will wipe all your data! Type:
Code:
Code:
fastboot oem unlock xxxxxxxxxxxxxxxx
(xx is for your unlock code)
10. Ones it's done type:
Code:
Code:
fastboot reboot
Your phone will reboot and you have an unlocked bootloader!
11. You can now go on installing TWRP on your device
HOW-TO INSTALL
Make sure you enabled OEM unlock in settings, if you haven't please do that now by tipping 10 times on build number (to activate developer options), than open developer options and go to OEM unlock, enable it
Have an unlocked bootloader is required! (In my case, I login the unlocker website at provide necessary information and get the unlock code so try yourself !!!)
Download the TWRP recovery from the download section below
Make sure you got fastboot drivers installed (I will describe this below in how to unlock your bootloader)
Open the adb/fastboot application on your pc and go to the directory where your TWRP img file is downloaded
Boot your phone into download mode (First method: fastboot reboot-bootloader while connected to pc. Second method: power off your phone, hit power on and volume down until it boots to download mode)
Check again if there is written: unlocked phone!
If yes type now into your adb/fastboot terminal:
Code:
fastboot flash recovery twrp-3.2.3-0-CRO_U00.img
Click to expand...
Click to collapse
Type:
Code:
Code:
fastboot reboot
Now boot into recovery by pressing: power+volume up+volume down at the same time
Enjoy twrp
HOW-TO ROOT
Backup, just in case
Have an unlocked bootloader and TWRP installed from above (take one from december)
We will use this root method: Phh's superuser
Download latest official phh superuser zip here.
Put the zip on your external sd card of your phone (since we can't access /data in twrp)
Boot into twrp and flash the downloaded file
Install latest Material phh apk: Release post
Now you are rooted, congrats!
SUPPORTED DEVICES
CRO-U00
HWCRO-U6580M
(Test your Device, if you want to take the risk )
Official Release Link : https://twrp.me/huawei/huaweiy32017.html
DOWNLOAD
Updated Link Shared In Next Post.
Contributors
Omni 5.1.1 Minimal Twrp Source
Ubuntu 16.04
Google
HWDEV
****
More Information Given Later

[Reserved Post]

Thank you !
Thank you buddy. Though the link you mentioned for DOWNLOAD is no longer available, but I found one in the Official Release Link. :good:

key

TWRP doesn't install/boot on Redmi 6 Cereus

Hello everyone...
Problem in brief:
unlocked bootloader;
anti-rollback safeguard "theoretically" disabled;
three ROMs to try;
TWRP that does not want to install/start;
installed orangefox which worked, but after the first time it didn't start:
TWRP installed once but (flashed a ROM), openGapps was corrupt and the phone did not exit the fastboot ... other attempts all unsuccessful.
Extended problem:
I have been trying to install a custom ROM on my old Redmi 6 for a week now (I would like to be able to try at least one between Havoc, Corvus and Resurrection Remix, I already have the ROMs theoretically compatible with the model in question).
After three days (and creating a virtual machine with Windows 10 on my Arch-based distro), I am able to unlock the bootloader (with no waiting time, account created for three days but device in possession for more than two years). Yesterday I managed to put OrangeFox, but I did not have a microSD at hand and I had to restart the cell normally... then I put my hand to a micro SD that I had somewhere, the Redmi does not start in recovery I need to pay for it TWRP, but in the boot partition instead of recovery, due to my distraction error while using the "Xiaomi ADB Fastboot Tool" program, but I managed to flash the official MIUI 11 ROM to repair the damage (note: in all I flashed twice so far) through the semi-official tool, or the linux port of the official one, which should allow the installation of TWRP and ROM of your choice (but it is practically abandoned, so the TWRP option does not work and without does put other ROMs that are not the official model). I tried again several attempts, all preceded by the disabling of the ARS, today, to reinstall TWRP and OrangeFox both through the Xiaomi ADB Fastboot tool and via the terminal... but I am no longer successful...
Terminal output:
❯ sudo fastboot devices
[sudo] password di omar:
d672d8b67d29 fastboot
❯ sudo fastboot flash recovery twrp.img
Sending 'recovery' (24908 KB) OKAY [ 1.053s]
Writing 'recovery' OKAY [ 0.333s]
Finished. Total time: 1.388s
❯ sudo adb reboot recovery
error: no devices/emulators found

When operating phone in Fastboot mode as 1st re-boot phone to Android OS, so that ADB can access it
Code:
fastboot reboot
and then as 2nd invoke recovery via
Code:
adb reboot recovery

I followed the advice, but stock recovery starts and not TWRP...

Then TWRP isn't got installed properly.

I tried again from the terminal (after the previous attempt from GUI) with Xiaomi ADB Fastboot ... nothing, always the recovery stock

Is there a way to flash the ROM from a pc?

Stock ROM always can get flashed from PC via ADB Sideload method

I meant without having to go through TWRP

On windows it remains stationary like this (it has been for at least 10 minutes)...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Apparently some Xiaomi ROMs immediately overwrite the custom recovery... here (site in Italian), in fact, among the comments I read that to get around this problem you must have the ROM ready to install... I'd be ready, if only I could flash TWRP or OrangeFox at least once...
If so, would it be useful to try flashing the "original" ROM? Due to the wrong attempt, I used MiFlash to flash the stock ROM ... which was updated to the latest release (11.0.5 instead of 10.3.4)

I managed to flash OrangeFox ... only problem is that now it has given me back the problem of the lack of an OS. I try to flash Havoc OS (unofficial build for Redmi) ... but I ran into a number of errors. First of all, it gives that /system and / cache are not mounted. Then the terminal gives these results:
Code:
E:TWFundc ::Unpack_Image failed.
E:Deactivation process: Unable to unpack boot image
and
Code:
Errore montaggio '/data' (Invalid argument)
Errore montaggio '/cache' (Invalid argument)
Edit: the errors below I managed to solve by simply formatting...

Flashed again MIUI 11 (the official ROM), the custom recovery is removed, and trying to install one again, the ROM "breaks" giving recovery when you try a restart "Warning, no OS present on the device"... then, not only it is impossible for me to flash other ROMs, but also to root only...

i have same issue with Cactus...

Kasull said:
Flashed again MIUI 11 (the official ROM), the custom recovery is removed, and trying to install one again, the ROM "breaks" giving recovery when you try a restart "Warning, no OS present on the device"... then, not only it is impossible for me to flash other ROMs, but also to root only...
Click to expand...
Click to collapse
yo,
have you tried PBRP, i was able to install Lineage 16 on my cactus...installed PBRP, format card
and then boot to bootloader and flash twrp...

[RECOVERY] [Infinix Note 12 5G] [TWRP 3.7.0] [X671] [12+] [UNOFFICIAL] TeamWin Recovery - Initial release

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void!!!
*
* If sh!t happens, i am not responsible for your bricked device.
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications,
* Do at your own risk!!!
*/
Team Win Recovery Project 3.7.0 for Infinix​Note 12 5G​Introduction:​Team Win Recovery Project, is an open-source software custom recovery
image for Android-based devices. It provides a touchscreen-enabled
interface that allows users to install third-party firmware and back up the
current system which are functions often unsupported by stock recovery.
Version and device Information:​
Status: -Stable, Unofficial (Initial build)
Based on TWRP version: 3.7.0
Device: Infinix Note 12 5G
Codename: X671
Android version: Android 12+ (X0S v12)
Release Date: 19 March, 2023
Last Updated: 08 April, 2023
Maintainer: Shibu Shaji, (perilouspike)
Minimal manifest: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_aosp​​Installation.​ - The installation is a little bit tricky and problematic compared to other devices!, so read every steps carefully and do as it states.
Prerequisite:​ - Copy the stock boot.img and twrp.img to your device's internal storage, external SDcard or OTG drive.
Step:1 Installing TWRP recovery.​• Disable verified boot first with this command: (optional)
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img[/INDENT][/INDENT]
[INDENT][INDENT]'Which is extracted from current stock rom ozip file.'[/INDENT][/INDENT]
[INDENT][INDENT]
• Flash twrp build with the command:
Code:
fastboot flash boot <twrp_image _name>.img
• Reboot to recovery with the command:
Code:
fastboot reboot recovery
Step: 2 Installing Recovery Ramdisk.​• After rebooted the device to twrp recovery, go to the INSTALL option in TWRP and select the stock boot.img that you previously copied to the device.​• Flash the boot.img to the given Boot partition.​• After that, go to ADVANCED option in TWRP and select Install Recovery Ramdisk from the given option.​• Now select the twrp.img that you previously copied to the device storage.​• And 'swipe to install' it.​• Then reboot the device to system.​Enjoy, You have successfully installed the twrp recovery for your device without any issues !!​Alt method for Step: 2: Using the Flash Current TWRP Feature.​• After installing the boot.img on step 2.​• You can choose the 'Flash current TWRP' options from ADVANCED options instead of choosing 'Install Recovery Ramdisk'. That will also flash the TWRP and it will stay permanently forever.​​List of features working:​• Support Decryption for Android 12 (tested and works with stock firmware and some available GSI roms)
• External SD Card & USB-OTG
• Successful installation of flashable .zips, Magisk (Custom rom not tested as it is not available now)
• Additional features such as close AVB2.0. (disabled-verify on vbmeta)
• Working Mounting/Unmounting of Dynamic partitions (r/o only)
• Fully functional Backup/Restore of all partitions.
• Adb Sideloading
• Fully functional Adb and Fastbootd in twrp.
Whats not working:​- You tell meh
Note:​• If you got 'unable to mount /data' error or Bootloop after flashing a ROM or having done a Format Data do the below.
Boot to bootloader and:
Code:
fastboot devices
fastboot -w
fastboot reboot
Changelogs:​
• Removed support for x671b. (Some x671b devices can't boot the build and causes bootlooping, needs to be test again)
• Updated sources
Click to expand...
Click to collapse
Downloads:​X671
twrp-3.7.0_12-Unofficial-Stable-X671.img
CREDITS:​• The TWRP Team
• Special thanks to @carlodeeCrypton

I tried following the steps I unlocked my bootloader first I made sure OEM unlocking is enabled... now I have Orange state showing and a boot loop... can you please help? I cant turn off my phone and enter recovery or fastboot... I also dont want to open my phone

I have followed instructions carefully. Have OEM unlocking enabled.. I unlocked my bootloader before doing this... now I have Orange State notification.. and endless bootloop... my phone cannot turn off, enter recovery or fastboot... what should I do?

Sir can you make a twrp recovery for my infinix note 12. Please rep

rohanjena said:
Sir can you make a twrp recovery for my infinix note 12. Please rep
Click to expand...
Click to collapse
The thing is, we need testers for testing the build and no one is willing to do it.

Shibu Shaji said:
The thing is, we need testers for testing the build and no one is willing to do it.
Click to expand...
Click to collapse
can you give me the build, probably i would tested but im gonna ask my friend that have same phone

Can you test the note 12 5g build first?

PikriNtr said:
can you give me the build, probably i would tested but im gonna ask my friend that have same phon
Click to expand...
Click to collapse
Shibu Shaji said:
Can you test the note 12 5g build first?
Click to expand...
Click to collapse
you mean x671 build on x670?
nope

I can give you my boot.img