Hello.. I have device runs on android 2.2. I tried to change the framework-res.apk and hope i will get custom view for my gadget, but now my phone get boot loop....
I try to fix it by replacing the modified file with the original framework-res.apk file by accessing the phone through adb, but i can't access the su to get permission for replacing the file, i got these:
$ su
su
[1] + Stopped (signal) su
$ su
su
[2] + Stopped (signal) su
[1] Segmentation fault su
$
even i tries many times but the problem still...
Or any another methode to fix this boot loop problem... ???
Help me...! help me....! Please....
which phone are u using?
i'm using MT6516.. it's china phone..
I have a Huawei H867G Inspira it is or was rooted now through adb shell i cant execute any busybox commands mkdir, mount, ls etc. it gives me cannot execute permission denied. Now the system is read only i have tried several adb commands i can get shell but su command just stays in limbo but the toast notifications says that shell has been granted super user permission but nothing happens i can't use titanium backup either and fix permissions on scripter, and busybox installer don't work any help would be greatly appreciated
I'm also using ics and out is aqualcomm device rooted with framaroot o have uninstalling root won't work i used customscript on framaroot 1.9. It says success by the system status is still read only
*Since this problem can happen to other LG devices, I'm writing here.
-Summarized Question for Busy XDAers-
1.Installed su binary and busybox through Android System Recovery 3e.
2.Can get root access from LG Recovery mode, half access on ordinary boot+adb shell, Permission denied on terminal emulator app. SuperSu not working, and 'root' is granting permission every 5 minutes.
3.HELP PLEASE!
-Full Question-
Maybe it can be a real noobish question, but I need help rooting my G Pro.
LG started Kitkat update a week ago, and G Pro also got Kitkat update.
I tried to root my device using old methods, and new methods for other G devices, but none of them worked.
So! I tried making one for me, using Android System Recovery 3e(maybe it could be a problem?)
I booted my device to recovery using
Code:
'adb reboot recovery'
and sideloaded zip file containing su binary and busybox.
Of course I signed it with testkey, so I could get SuperSu, su binary, and busybox installed on my system.
But, after rebooting my device, I felt something went wrong.
I typed
Code:
'su'
command on terminal enulator, and got
Code:
'Permission Denied'
error.
Assuming it's related to permission and owner of su binary, I tried
Code:
ls -al /system/bin/su
.
Here's the result:
Code:
[email protected]:/ $ su
Permission denied
1|[email protected]:/ $ ls -al /system/bin/su
-rwsr-sr-x root root 85096 2008-08-01 21:00 su
It seems...nothing's wrong!
So I tried with adb, and got # without asking Superuser app.
But I couldn't mount system, as well as other commands require root access.
I removed SuperSu and downloaded Superuser by ChainsDD, but that didn't work.
Instead, I could see on log that 'root' was granting permission every 5 minutes.
Not knowing what the problem is, I rebooted device to LG recovery(diffrent from Android Recovery 3e).
I could access adb from there, and got root access and removed some garbage apps.
Then, it means su binary and busybox is working.
What is the problem??? Please help!
EDIT:It was binary version problem lol
I was trying to unlock my android phone by adb installed. I tried to followed these steps:
adb devices
adb shell
cd data/system
su r
m *.key
But when i typed and enter su, its showing permission denied. My phone is also rooted. But i don't know why after entering su, its showing permission denied.
Can you please tell what extra steps I have to do so that I don't get permission denied ? Please help me out. Tell me step by step procedure, what I have to do.
The novel CAT S22 Flip was released in September, and is pretty much the only of its kind. It actually has an unlocked bootloader, and I was excited to try to root it. However, there's no version of TWRP designed specifically for it! Having never rooted anything before, does anyone know my options in this case to get TWRP for this phone? (Or another method of root I'm not aware of would also be fine.) Thanks!
Shoitah said:
The novel CAT S22 Flip was released in September, and is pretty much the only of its kind. It actually has an unlocked bootloader, and I was excited to try to root it. However, there's no version of TWRP designed specifically for it! Having never rooted anything before, does anyone know my options in this case to get TWRP for this phone? (Or another method of root I'm not aware of would also be fine.) Thanks!
Click to expand...
Click to collapse
Hey. I'm in the same boat. I need to add su binary but looks like the only way to do it is with TWRP. Have you succeeded? I keep trying to find a way to do it, so far no luck.
TWRP isn't needed at all to push ( suitable ) SU binary onto Android's filesystem: you achieve this by means of ADB, too
jwoegerbauer said:
TWRP isn't needed at all to push ( suitable ) SU binary onto Android's filesystem: you achieve this by means of ADB, too
Click to expand...
Click to collapse
Sweet!!! How does it look like?
I just tried adb sideload <file.zip> while in recovery mode and i'm getting this
adb: sideload connection failed: closed
adb: trying pre-KitKat sideload method...
adb: pre-KitKat sideload connection failed: closed
When check adb devices its shows that device is unauthorized. But it's only unauthorized in recovery mode.
Actually looks like I have a problem with recovery mode. Instead I'm getting "No command" screen. It's not even getting into recovery
To perform a ADB Sideload - what is used to flash a Stock ROM - phone must get booted into Sideload mode at 1st
Code:
adb devices
adb reboot sideload
adb sideload <STOCK-ROM-ZIP>
adb reboot
Oh cool. Didn't know that I could reboot stratight to sideload and bypass initial recovery menu. Thank you!
As for my previous issue with "No command" error on recovery boot, I managed to resolve it. When It's gets to "No command" screen, you need to hold Power + Volume Down just long enough to tap Volume Up. And then recovery menu will appear. So Press Power + Volume Down and then tap Volume Up.
When I tried to sideload su binary with
Code:
adb sideload <file.zip>
On the mobile screen i'm getting this error
Code:
E:failed to verify whole-file signature. Update package verification took 0.5 s ( result 1)
E:Signature verification failed
E: error: 21
Looks like recovery not allowing to install unsigned packages. Is there a way around it? Do I need to source another su binary or there is a way to sign it?
Ok. I think I'm getting closer to the core issue. I thought that I rooted the device, but I only unlocked the bootloader. So device is not rooted. As per original thread topic, looks like there is still no TWRP yet and boot.img is not accessible to modify. Tried to get boot.img directly from the device, but getting - permission denied.
Any other walkarounds i should try?
SU binary isn't a signed package. It's a ~110KB file you have to push onto Android OS, preferred to /data/local/tmp directory and afterwards have to make it executable.
I've downloaded Chainfire SuperSu Zip packages, unpacked it and got a su file from arm64 folder. As you mentioned, su file is 108.5KB =)
I've pushed it to /data/local/tmp and made it executable
Code:
S22FLIP:/ $ ls -la /data/local/tmp
total 114
drwxrwxrwx 2 shell shell 3488 2022-12-22 09:36 .
drwxr-x--x 4 root root 3488 1970-01-01 12:15 ..
-rwxrwxrwx 1 shell shell 108496 2008-02-29 03:33 su
Maybe I'm missing something, I still get
Code:
S22FLIP:/ $ su
/system/bin/sh: su: inaccessible or not found
You must tell Android where the SU binary is located
Code:
cd /data/local/tmp & su
or
Code:
/data/local/tmp/su
jwoegerbauer said:
You must tell Android where the SU binary is located
Code:
cd /data/local/tmp & su
or
Code:
/data/local/tmp/su
Click to expand...
Click to collapse
Hi. I am trying to root the phone. I tried with QFIL to get the boot.img file with no luck.... I am trying now with su. I put the su binary where you said and execute it.
Now what should I do? If you can help me, I will be grateful
IMO you can't root a phone ( a conglomerat of hardware pieces ) but only enable Android OS to run system commands as root ( will say with elevated rights if those are required ) by means of su.
Knowing this you would open a terminal window in Android and type out
Code:
<FULLPATH-TO-SU-BINARY-HERE>/su -c "<SHELL-COMMAND-THAT-REQUIRES-ELEVATED-RIGHTS-HERE>"
Example:
Code:
/data/local/tmp/su -c "mount -o remount,rw -t auto /system"
jwoegerbauer said:
IMO you can't root a phone ( a conglomerat of hardware pieces ) but only enable Android OS to run system commands as root ( will say with elevated rights if those are required ) by means of su.
Knowing this you would open a terminal window in Android and type out
Code:
<FULLPATH-TO-SU-BINARY-HERE>/su -c "<SHELL-COMMAND-THAT-REQUIRES-ELEVATED-RIGHTS-HERE>"
Example:
Code:
/data/local/tmp/su -c "mount -o remount,rw -t auto /system"
Click to expand...
Click to collapse
Doesn't work. It looks like the su binary doesn't grant system commands root
I really don't know what to do......