[Q] need help with adb shell busybox is write protected - General Questions and Answers

I have a Huawei H867G Inspira it is or was rooted now through adb shell i cant execute any busybox commands mkdir, mount, ls etc. it gives me cannot execute permission denied. Now the system is read only i have tried several adb commands i can get shell but su command just stays in limbo but the toast notifications says that shell has been granted super user permission but nothing happens i can't use titanium backup either and fix permissions on scripter, and busybox installer don't work any help would be greatly appreciated

I'm also using ics and out is aqualcomm device rooted with framaroot o have uninstalling root won't work i used customscript on framaroot 1.9. It says success by the system status is still read only

Related

[Q] How do I access my /root directory?

I just unlocked my bootloader and rooted my phone. But, I'm still not able to see system files or access the root directory or run various commands like SUFBS or mount from adb.
Does anyone know what I can do to get these permissions?
adb shell
root
root: permissions denied
type su first
Aro2220 said:
I just unlocked my bootloader and rooted my phone. But, I'm still not able to see system files or access the root directory or run various commands like SUFBS or mount from adb.
Does anyone know what I can do to get these permissions?
adb shell
root
root: permissions denied
Click to expand...
Click to collapse
try with su permissions:
Code:
adb shell
su root
And allow su permissions on the phone, when asked...
Neato! Thanks

Shell Root

Hi everyone
i tryed execute this command dd if=/dev/block/bml3 of=/sdcard/bml3.bak
but my shell is not SU (super user) "ROOT"
from terminal i executed SU and the reply is access denied
my phone is the sidekick4g
i tryed with the superoneclick but not works.
thanks a lot for your help
What didn't work about superoneclick? You have to enable USB debugging on the phone before superoneclick can work.

[Q] Problems with supersu and busybox on juawei inspira

My Huawei Inspira was rooted thanks to Framaroot.apk. yesterday it went on the fritz and I reset the phone and lost busybox and supersu with ota survival so I dl framaroot and installed again but this time it said partial success /system is write protected. permission denied I have tried su, sudo chmod, chown, chgrp, chown adb, terminal nothing will work on this build.prop nothing at all any suggestions please I am complete noob at this but, cant find a stockroom or anything on this even on huaweis site itself any help would be greatly appreciated.
se7encircles said:
My Huawei Inspira was rooted thanks to Framaroot.apk. yesterday it wentboot the fritz and I reset the phone and lost busybox and supersu with ota survival so I dl framaroot and installed again but this time it said partial success /system is write protected. permission denied I have tried su, sudo chmod, chown, chgrp, chown adb, terminal nothing will work on this build.prop nothing at all any suggestions please I am complete noob at this but, cant find a stockroom or anything on this even on huaweis site itself any help would be greatly appreciated.
Click to expand...
Click to collapse
Ok i can get to ADB shell but if i Type su it stays In limbo the phone says adb shell has been granted su but nothing i did a dumpsys and it said the boot sector has two conflicting signatures can any one leaf me in the direction on this i can use some shell command lsof, adb, applypatch, bmgr etc. but mksh has an error id permission denied rad only file system anyone have any knowledge to help please do any help would be greatly appreciated

[Resolved] [Q] Help needed rooting G Pro! T_T

*Since this problem can happen to other LG devices, I'm writing here.
-Summarized Question for Busy XDAers-
1.Installed su binary and busybox through Android System Recovery 3e.
2.Can get root access from LG Recovery mode, half access on ordinary boot+adb shell, Permission denied on terminal emulator app. SuperSu not working, and 'root' is granting permission every 5 minutes.
3.HELP PLEASE!
-Full Question-
Maybe it can be a real noobish question, but I need help rooting my G Pro.
LG started Kitkat update a week ago, and G Pro also got Kitkat update.
I tried to root my device using old methods, and new methods for other G devices, but none of them worked.
So! I tried making one for me, using Android System Recovery 3e(maybe it could be a problem?)
I booted my device to recovery using
Code:
'adb reboot recovery'
and sideloaded zip file containing su binary and busybox.
Of course I signed it with testkey, so I could get SuperSu, su binary, and busybox installed on my system.
But, after rebooting my device, I felt something went wrong.
I typed
Code:
'su'
command on terminal enulator, and got
Code:
'Permission Denied'
error.
Assuming it's related to permission and owner of su binary, I tried
Code:
ls -al /system/bin/su
.
Here's the result:
Code:
[email protected]:/ $ su
Permission denied
1|[email protected]:/ $ ls -al /system/bin/su
-rwsr-sr-x root root 85096 2008-08-01 21:00 su
It seems...nothing's wrong!
So I tried with adb, and got # without asking Superuser app.
But I couldn't mount system, as well as other commands require root access.
I removed SuperSu and downloaded Superuser by ChainsDD, but that didn't work.
Instead, I could see on log that 'root' was granting permission every 5 minutes.
Not knowing what the problem is, I rebooted device to LG recovery(diffrent from Android Recovery 3e).
I could access adb from there, and got root access and removed some garbage apps.
Then, it means su binary and busybox is working.
What is the problem??? Please help!
EDIT:It was binary version problem lol

[Working]Root Kindle Fire HD8 6th Gen

Ladies and Gentleman,
I was able to root the HD8 6th Gen using Kingoroot while in airplane mode. I download the executable and ran it directly from my computer. My Fire tablet is on version 5.3.1.1 and was never registered with Amazon. I can run su in adb but the SuperUser app is not working on my tablet. I am looking into replacing the KingoRoot SuperUser app with SuperSU. I suggest you block updates as soon as you achieve root.
look at this thread to see if you can remove Kingroot and replace
https://forum.xda-developers.com/am...rtool-root-t3272695/post69855730#post69855730
This applied to 7" but may be same issue you are having. Note I would suspect you at least need to install the app since you used the PC version but then that might allow replacement fully. The Rootjunky script basically installs supersu and removes the kingroot app following this approach: https://www.droidmen.com/remove-kingroot-kinguser-with-supersu/
So now the questions are:
* Does the app work too or just PC version
* Does a device which has been used and registered with Amazon work? I am on 5.3.1.1, have OTA disabled, have Novalauncher sort of working, and managed to get Amazon to disable the ads lock screen but right now the device does not leave home due to Opendns constraints as I did not want to lose 5.3.1.1 while waiting.
Decided to try this on 5.3.2.1, ran Kingroot for PC few times (version 3.4.0 build 1142). Did not work. Hope it works for you 5.3.1.1 guys.
I believe 5.3.2 can be downgraded to 5.3.1.1 but I also believe 5.3.2.1 is confirmed to not be downgradable.
I was lucky and got my BF unit with 5.3.1.1 and blocked OTA right away
I register to reply this thread and tell everyone that 5.3.1.1 CAN BE ROOT using KingoRoot(not KingRoot)
blocked OTA and planning to place Kingoroot with Supersu now.
go kingoapp.c0m(replace 0 with o) and download the PC one.
Tried APK one but seems stuck at 90% or not enough patient?
---------- Post added at 05:17 PM ---------- Previous post was at 05:12 PM ----------
chemie99 said:
look at this thread to see if you can remove Kingroot and replace
https://forum.xda-developers.com/am...rtool-root-t3272695/post69855730#post69855730
This applied to 7" but may be same issue you are having. Note I would suspect you at least need to install the app since you used the PC version but then that might allow replacement fully. The Rootjunky script basically installs supersu and removes the kingroot app following this approach: https://www.droidmen.com/remove-kingroot-kinguser-with-supersu/
So now the questions are:
* Does the app work too or just PC version
* Does a device which has been used and registered with Amazon work? I am on 5.3.1.1, have OTA disabled, have Novalauncher sort of working, and managed to get Amazon to disable the ads lock screen but right now the device does not leave home due to Opendns constraints as I did not want to lose 5.3.1.1 while waiting.
Click to expand...
Click to collapse
my device is registered with amazon and it works
Detailed instruction on post#38
so what is difference between
kingoroot
and kingroot
??
I am familiar with Kingroot but kingoroot seems to be another animal? Is kingo safe? We have a total of 3 lifetime posts from two accounts who are speaking its benefits....
chemie99 said:
so what is difference between
kingoroot
and kingroot
??
I am familiar with Kingroot but kingoroot seems to be another animal? Is kingo safe? We have a total of 3 lifetime posts from two accounts who are speaking its benefits....
Click to expand...
Click to collapse
honestly I dunno, I'm new to android, just bought the kindle to start playing with android...
but I found it difficult to replace the kingoroot with supersu, when I type su in terminal, it show nothing, can't give root permission to terminal emulator.
I replaced kingoroot with supersu following instruction from androidforums.com/threads/script-replace-kingoroot-with-supersu.919175/
After it's done, supersu doesn't prompt for root access. So I set 'default access' to 'grant' in supersu settings, and it seems to be working.
g4ry12 said:
Decided to try this on 5.3.2.1, ran Kingroot for PC few times.
Click to expand...
Click to collapse
I was not paying attention, it's KingoRoot, not KingRoot. Downloaded KingoRoot for PC (v1.4.9), and tried on 5.3.2.1. Rooting failed, unfortunately.
I ran the PC kingo and rooted.
I then tried to remove and replace with supersu and it failed
I lost root
I tried to rerun Kingo PC but it wanted debugging enabled even though it was
tried the apk kingo (from kingoapp.com; playstore it is a adware hack)
got stuck at 90%
exited and kindle was really sluggish; maybe something to do with my novalauncher or something?
power off reboot and stuck in boot up (Fire image). Now can't boot.
Message is be careful with kingo when removing....will try restore now.
Edit: wiping data and cache did not help. Did brick recovery to 5.3.1.1 (which is what it was on when I got it), and managed to recover. Glad I don't have to send this one back to Amazon!
I will now restart kingo root effort and if it works will report back steps (including supersu replacement).
So I have root according to kingo but "root checker basic" says I do not have root.
Try to open "superuser" (which is a kingo superuser app) and it is just a blank screen then back to Home.
The removal tool that @2ig2ag linked did not work.
It failed on "mount -w -o remount /system" with "mount: operation not permitted"
I also tried to manual cp the su file over and get error "read only file system"
Edit: Despite kingo saying you have root, you don't. At least not complete root. I am unable to copy anything into system/app via ES File explorer too. I am unable to grant programs that want access, that access. For example, Titanium BackUp is unable to detect "Su and Busybox" so no go.
I am able to pm disable the firelauncher for example but that is about it
chemie99 said:
So I have root according to kingo but "root checker basic" says I do not have root.
Try to open "superuser" (which is a kingo superuser app) and it is just a blank screen then back to Home.
The removal tool that @2ig2ag linked did not work.
It failed on "mount -w -o remount /system" with "mount: operation not permitted"
I also tried to manual cp the su file over and get error "read only file system"
Edit: Despite kingo saying you have root, you don't. At least not complete root. I am unable to copy anything into system/app via ES File explorer too. I am unable to grant programs that want access, that access. I am able to pm disable the firelauncher for example but that is about it
Click to expand...
Click to collapse
I soft-bricked once, stuck at fire logo, sideload adb and resumed normal.
I didn't use the root checker to check, the superuser included will crash when I launch it,
but I can su in adb shell..
@2ig2ag's way not work for me either,
I cannot run the script, it said permission denied, then I try to run it manually,
I can remount /system, it do not show any error, but I am stopped at "cp ./su /system/xbin/daemonsu",
it said "daemonsu" text file in use.
tried ultra explorer as another way to get to /system and it just locks up when trying to detect root.
Tried manually installing supersu.apk and it locks up and requires reboot to get back to working device.
@phpbb88 I retried "mount -w -o remount /system" and it worked; maybe I wasn't in su at the time. I get the same error on file copy
So to summarize:
you can: adb su
you can: pm disable fire launcher and OTA (not sure if unrooted allows this too?)
you can not:
write to /system
install any apk that require root and grant root access
switch to supersu
adb remount (fails)
I would not call this a successful root. I am not even sure of the pm disables will last more than 24 hours.
chemie99 said:
tried ultra explorer as another way to get to /system and it just locks up when trying to detect root.
Tried manually installing supersu.apk and it locks up and requires reboot to get back to working device.
@phpbb88 I retried "mount -w -o remount /system" and it worked; maybe I wasn't in su at the time. I get the same error on file copy
So to summarize:
you can: adb su
you can: pm disable fire launcher and OTA (not sure if unrooted allows this too?)
you can not:
write to /system
install any apk that require root and grant root access
switch to supersu
adb remount (fails)
I would not call this a successful root. I am not even sure of the pm disables will last more than 24 hours.
Click to expand...
Click to collapse
I am using a file explorer called "ES File explorer", it cannot view the system file when it is not root.
After Kingoroot, I can view them, but I still cannot create file in /system by using that File explorer.
However I can successfully create a dir in /system in adb shell, shown below.
[email protected]:/system # mkdir 123
[email protected]:/system # ls
123
app
bin
build.prop
data
etc
fonts
framework
lib
lib64
lost+found
media
priv-app
recovery-from-boot.p
sbin
security
sqfs
tts
usr
vendor
xbin
[email protected]:/system #
I have made progress...with kingo install I did this:
copy the files of the kingo root removal to sdcard/kingo
adb shell
su
mount -w -o remount /system
cd /sdcard/kingo
cp ./su /system/xbin/daemonsu
fails because it is locked. Then I started to think that the steps were for the kingo app and not the PC so
with adb window still open, run PC program and remove root
then
cp ./su /system/xbin/daemonsu
chmod 0755 /system/xbin/daemonsu
daemonsu -d &
./step1.sh
got some errors
then sideload the supersu apk via ES file explorer
then allow supersu to do it thing and reboot.
Now I have supersu running!''
edit:
but do I have root?
Titanium backup still fails but ultra explorer does say it has root
now adb shell su fails.....
chemie99 said:
I have made progress...with kingo install I did this:
copy the files of the kingo root removal to sdcard/kingo
adb shell
su
mount -w -o remount /system
cd /sdcard/kingo
cp ./su /system/xbin/daemonsu
fails because it is locked. Then I started to think that the steps were for the kingo app and not the PC so
with adb window still open, run PC program and remove root
then
cp ./su /system/xbin/daemonsu
chmod 0755 /system/xbin/daemonsu
daemonsu -d &
./step1.sh
got some errors
then sideload the supersu apk via ES file explorer
then allow supersu to do it thing and reboot.
Now I have root with supersu!
Titanium backup still fails but ultra explorer does say it has root
Edit: hmmm..
now adb shell su fails.....
Click to expand...
Click to collapse
I cannot run the step1.sh, still show permission denied.
I tried manually, but got another permission error...
[email protected]:/sdcard/Kingo # cp ./su /system/xbin/daemonsu
[email protected]:/sdcard/Kingo # chmod 0755 /system/xbin/daemonsu
[email protected]:/sdcard/Kingo # daemonsu -d &
[1] 8434
[email protected]:/sdcard/Kingo # ./step1.sh
sh: ./step1.sh: can't execute: Permission denied
[1] + Done daemonsu -d
126|[email protected]:/sdcard/Kingo # cp ./su /system/xbin/su
[email protected]:/sdcard/Kingo # chmod 0755 /system/xbin/su
[email protected]:/sdcard/Kingo # ./chattr.pie -ia /system/xbin/ku.sud
sh: ./chattr.pie: can't execute: Permission denied
126|[email protected]:/sdcard/Kingo # ./chattr.pie -ia /system/xbin/supolicy
sh: ./chattr.pie: can't execute: Permission denied
126|[email protected]:/sdcard/Kingo #
after the errors, did you install supersu.apk?
I ignored the errors thinking they were from differences between kingo apk and kingo PC versions of what they put on device.
Supersu does manage to install itself but root checker still says I do not have root.
chemie99 said:
after the errors, did you install supersu.apk?
I ignored the errors thinking they were from differences between kingo apk and kingo PC versions of what they put on device
Click to expand...
Click to collapse
I didn't finish all the steps in step1.sh, cause I have installed SuperSU at the beginning of time,
I then try to run Supersu and it said blahblahblah error, need to reboot my device.
wola, i lost my connection to root adb shell, and now going to root it again
phpbb88 said:
I didn't finish all the steps in step1.sh, cause I have installed SuperSU at the beginning of time,
I then try to run Supersu and it said blahblahblah error, need to reboot my device.
wola, i lost my connection to root adb shell, and now going to root it again
Click to expand...
Click to collapse
I only install supersu as the step after running step1; it worked, and took hold (at least no errors and opening the program looks normal). The issue is that it won't grant access to anything (TB, flashfire, etc)
chemie99 said:
I only install supersu as the step after running step1; it worked, and took hold (at least no errors and opening the program looks normal). The issue is that it won't grant access to anything (TB, flashfire, etc)
Click to expand...
Click to collapse
Kingoroot PC asked me to grant root access to it by pressing OK on my device's pop up when my device is under root,
but my device wouldn't show anything.
Is there any problem on fire OS that wouldn't show this pop up?

Categories

Resources