Recently bought a Note 20 Ultra from Hongkong(TGY) and happened to upgrade the system from Android 11 to 12.
For some reasons i decided to flash the ROM from the TGY(HK version) to CHC(Chinese version) but failed with a typical error code "abl.elf" when running on Odin.
My baseband version is N9860ZCU3EVA3 and the firmware verion is N9860ZCU3EVA7.
i could not get around the issue. Coudl someone help?
Try first to upgrade to TGY Android 12 ---> then flash CHC Android 12.
Related
Hi, I was running the latest noble rom (3,1) but I wanted to go back to stock samsung firmware. I downloaded and flashed a 6.0.1 firmware for the UK. When i was trying to flash it I got a error an now it wont boot. I get the error " Check device: 4, Binary: 3". I can get in to download mode but im not sure what firmware to flash
kLN93 said:
Hi, I was running the latest noble rom (3,1) but I wanted to go back to stock samsung firmware. I downloaded and flashed a 6.0.1 firmware for the UK. When i was trying to flash it I got a error an now it wont boot. I get the error " Check device: 4, Binary: 3". I can get in to download mode but im not sure what firmware to flash
Click to expand...
Click to collapse
Use the firmware for your region, e.g. country of issue and figure out the region code e.g. XFA, XFE, etc.
Ok so I had the same problem as you. When you get this error in download mode, it's because you can't downgrade your bootloader.
The version of TW you're trying to flash has an older bootloader than the bootloader you have already install.
You need to flash the latest version of TW. You can find it on Sammobile or with the soft Samfirm.
Hi
I have galaxy s6 with G920FXXU2COH2 baseband & g920F model number (mentioned in about phone section), there is android 5.1 installed on this phone & I want to upgrade to android 6 so I download G920FXXS4DPG4 Rom from sammobile.
I installed odin on my pc & when I want to setup this rom I faced with this error : "sboot.bin - fail"
- Is this necessary to install G920FXXU2COH2 rom (as same as primary rom)?
-how can I upgrade the rom?
-
Alireza20 said:
Hi
I have galaxy s6 with G920FXXU2COH2 baseband & g920F model number (mentioned in about phone section), there is android 5.1 installed on this phone & I want to upgrade to android 6 so I download G920FXXS4DPG4 Rom from sammobile.
I installed odin on my pc & when I want to setup this rom I faced with this error : "sboot.bin - fail"
- Is this necessary to install G920FXXU2COH2 rom (as same as primary rom)?
-how can I upgrade the rom?
-
Click to expand...
Click to collapse
If it a stock rom then use Samsung Smart Switch to upgrade.
If that don't work then use the international stock version for your part of the world with Odin.
Hey guys since I upgraded my J700F to the latest version with october security patch
I dont seem to be able ti downgrade my phone to 5.1.1
I tried some ways including deleting 2 files from 5.1.1 rom and fkash but no luck
Everytime i get this error in downloading mode:
sw rev check fail device 1 binary 0
Please someone give me a step by step guide to downgrade to 5.1.1
Thanks
Flash using odin
I guess you will have to do it using odin. Search these forums for the guide. I saw it around here. Use search man. Thanks.
Download the firmware of 5.1.1 of j700f from sam mobiles website and flash it with odin
please i need some help too can't downgrade it from mm to lp.. i read on some tread that the new mm bootloader did that
When boost mobile and sprint and virgin mobile updated their j7s from f3 to ph4 they did the samething but on 6.0.1. What they did was stop the flashing of the older rom which did not have the Asks software security. When you flash a older android version such as 5.0 over a new android version such as 6.0 the flash is declined. You cant downgrade cause the bootloader prevents it thats why theres a error message in odin.. not really sure why youd want 5.0 over 6.0.
Hi! I wanted to downgrade from android 7.0 to 6.0.1 to install Xtrestolite after. I have csc VD2 and tried with stock fw XEU and VD2 from sammo..but all i got was error :use Smart Switch
Questions:
Can I install Xtrestolite having android 7?
Why i couldn't downgrade to 6?
Thanks!!!
use odin to flash 6.0.1 firmware
That is what I tried to do. I used two versions of Odin and tried to flash 6.0.1 VD2 and XEU but i got an error after a few seconds and soft bricked my device. I tried to use Smart switch to recover but got stuck at 93% (2 times). Eventually I flashed 7.0 VD2 with Odin again. Back to where I started
flash this version: https://drive.google.com/file/d/0B6i7SkUaVY0GOTVTdEhmT2VFRHM/view
This version 4 files or just ap
This nougst s6 is pure s**t why there is no custom kernels ?
After I upgraded my J7 SM-J710MN to the Nougat android, the touch no longer works. I'm from Brazil and tried to flash through odin 4 rom stock 6.0 versions and FAIL always appears. Only the Nougat version I was able to flash but it did not work.
Which firmware version should I install? What to do?
The latest mm from august doesn't work?
Tried flashing the nougat TTT?
jrkiller said:
After I upgraded my J7 SM-J710MN to the Nougat android, the touch no longer works. I'm from Brazil and tried to flash through odin 4 rom stock 6.0 versions and FAIL always appears. Only the Nougat version I was able to flash but it did not work.
Which firmware version should I install? What to do?
Click to expand...
Click to collapse
That problem you have in your mobile is because you have installed Nougat 7 with the binary 4, you can not return to MM, here I leave the Original firmware TTT (Trinidad and Tobago) operator-free, before installing the firmware performs complete wipes, thus avoid Bugs in the New firmware.
https://forum.xda-developers.com/galaxy-j7/how-to/galaxy-j7-sm-j710mn-android-7-stock-t3672932
J710mn bit 6 fix touch
Hi guys I need solution fix touch j710mn bit 6 ? Thanks