I replaced stock recovery with Clockwork Mod recovery after I used One-Click Root. I would like to go back to stock recovery, before I one click unroot and return this phone to At&T.
Any tips to go back to stock recovery?
I saved the stock recovery as recovery.orig before I did anything. It is save in my /system/bin folder..
Flash to stock and return the phone - it will remove the CWM from the phone.
I was trying to avoid flashing to stock, only because I see some people had problems.
I assume they must have had "repartition" checked when they used ODIN.
I am assuming it should not be checked, correct??
If your using the PIT file then Odin will repartition it. YOU wont need that. just dont use the ultimate one brick use gtg's other return to stock with just the md5stock.Tar file and you should be ok.
even if you use the ultimate unbrick with the pit files(which i have used numerous time) you should still be ok.
Every once in awhile when I use Titanium back up after flashing I will restart and be stuck in a boot loop. Pushing vol up, home and power does not load recovery and it seems like I am forced to use Odin and flash back to stock and go from there. I may not have a great understanding of using Odin but through some searches I have not been able to see how to load a custom ROM from it, at least I can not find anything in a .tar file.
My question is where am I going wrong with Titanium or is there an easy way to get recovery back when it won't load. This last time I was just going from one JB leak ROM to another, used XML for the backup and poof.
Thanks everyone for whatever help you can toss my way.
Do not use titanium backup to restore data... however you can use it to restore apps only. There are no custom roms with the odin or .tar format.
droidstyle said:
Do not use titanium backup to restore data... however you can use it to restore apps only. There are no custom roms with the odin or .tar format.
Click to expand...
Click to collapse
Thanks for the info! Was wondering if the data part was killing me but it seemed to work most of the time.
So i did something stupid right after rooting my Relay. I deleted basic stock files that are necessary for the phone to function properly. I was able to copy them from my current phone (rooted T-Mobile G2/Desire Z) onto an SD card and in turn push them back onto my Relay. My problem is that I still get error messages constantly after boot up and the simplest tasks can take hours (not to mention I can't use phone, contacts, messaging). I have seen all over the web (and XDA) about unrooting the phone and retuning it to stock. I was thinking that I could unroot, then reroot my Relay and that will solve my problem.
I was all set to unroot when I encountered yet another issue. Samsung-updates.com and sammobile both direct you to download the firmware files from hotfile. Hotfile has been shut down due to copyright infringement. Where I can find the stock firmware files now that hotfile has been shut down?
Please help me as I anxiously await using my new phone without the extra bloatware!
Thank you,
RockinRita
RockinRita said:
I was all set to unroot when I encountered yet another issue. Samsung-updates.com and sammobile both direct you to download the firmware files from hotfile. Hotfile has been shut down due to copyright infringement. Where I can find the stock firmware files now that hotfile has been shut down?
Click to expand...
Click to collapse
Would Samsung's Kies software be able to restore it to stock, or is it too far gone for Kies to work?
Bobby Tables said:
Would Samsung's Kies software be able to restore it to stock, or is it too far gone for Kies to work?
Click to expand...
Click to collapse
Without the stock files wouldn't Kies be pointless?
The easiest way I've found to completely revert to stock, is to get a CWM flashable version of the unmodified stock rom (From the straight system image, not an update.zip reformated image) and a CWM flashable version of the stock recovery. Flash those in. If you want to reset your flash counter, make certain to also flash a su binary of some form (I personally prefer SuperSU, since it's so easy to clear out, run triangle away, then uninstall your su app properly.
http://forum.xda-developers.com/showpost.php?p=48581775&postcount=6
I've just put up recovery and system flashables of Stock JB.
Pushing on a Relay
RockinRita said:
So i did something stupid right after rooting my Relay. I deleted basic stock files that are necessary for the phone to function properly. I was able to copy them from my current phone (rooted T-Mobile G2/Desire Z) onto an SD card and in turn push them back onto my Relay.
Click to expand...
Click to collapse
I did a very similar thing to my Relay and I can only get it boot off of the SD card. I am curious how you performed the push. I assumed that you
used adb push, but how?
Thanks,
Lou
scopedial said:
I did a very similar thing to my Relay and I can only get it boot off of the SD card. I am curious how you performed the push. I assumed that you used adb push, but how?
Thanks,
Lou
Click to expand...
Click to collapse
I copied the files from my rooted HTC Desire Z/ T-Mobile G2 to a spare SD card I have and then I inserted that card into my Relay and started it up. It took me a few hours to get passed all the error messages that constantly pop up. And then I went into my files, external SD and moved the files over to the system folder on the Relay. After several reboots, the error messages still are coming up which I why I need to unroot it and reroot it.
Magamo said:
The easiest way I've found to completely revert to stock, is to get a CWM flashable version of the unmodified stock rom (From the straight system image, not an update.zip reformated image) and a CWM flashable version of the stock recovery. Flash those in. If you want to reset your flash counter, make certain to also flash a su binary of some form (I personally prefer SuperSU, since it's so easy to clear out, run triangle away, then uninstall your su app properly.
http://forum.xda-developers.com/showpost.php?p=48581775&postcount=6
I've just put up recovery and system flashables of Stock JB.
Click to expand...
Click to collapse
You may have just saved me, Magamo! Thank you for saving them to Drive! Once I get on my old slow Dell laptop (i'm on my Chromebook now- which unfortunately doesn't support most things) I'll try to flash your files and update you here since I cannot comment on your post as I have not posted enough myself.
Stock ROM Restore Method I Used
Magamo said:
The easiest way I've found to completely revert to stock, is to get a CWM flashable version of the unmodified stock rom (From the straight system image, not an update.zip reformated image) and a CWM flashable version of the stock recovery. Flash those in. If you want to reset your flash counter, make certain to also flash a su binary of some form (I personally prefer SuperSU, since it's so easy to clear out, run triangle away, then uninstall your su app properly.
http://forum.xda-developers.com/showpost.php?p=48581775&postcount=6
I've just put up recovery and system flashables of Stock JB.
Click to expand...
Click to collapse
You could also use Odin to flash a md5 sum of T699UVBMC5_HOME using the download mode of the Relay. Place in PDA, and tick off the Auto Reboot and F. Reset Time and hit start. Make sure you have the drivers required to do this. I think they're included with Kies. In my case, I used CWM to format /system, then I used download mode. However, I had to reset my device. AND CWM (plus root access) was erased after the stock restore. I didn't miss an important detail, did I?
furboom1240 said:
You could also use Odin to flash a md5 sum of T699UVBMC5_HOME using the download mode of the Relay. Place in PDA, and tick off the Auto Reboot and F. Reset Time and hit start. Make sure you have the drivers required to do this. I think they're included with Kies. In my case, I used CWM to format /system, then I used download mode. However, I had to reset my device. AND CWM (plus root access) was erased after the stock restore. I didn't miss an important detail, did I?
Click to expand...
Click to collapse
I'll be honest, you've got me on this one. I've never used ODIN, and am not well versed in its use. But yes, this is sounds like a more technical way of doing it without the CWM flashables I've mentioned. -- Impossible in some situations. For example, my fiancee's phone's USB port has died for all purposes other than charging, So if I'm to send it in for a warranty repair, I'll have to use the method I posted.
Confused here
Magamo said:
The easiest way I've found to completely revert to stock, is to get a CWM flashable version of the unmodified stock rom (From the straight system image, not an update.zip reformated image) and a CWM flashable version of the stock recovery. Flash those in. If you want to reset your flash counter, make certain to also flash a su binary of some form (I personally prefer SuperSU, since it's so easy to clear out, run triangle away, then uninstall your su app properly.
http://forum.xda-developers.com/showpost.php?p=48581775&postcount=6
I've just put up recovery and system flashables of Stock JB.
Click to expand...
Click to collapse
Magamo,
I'm sorry, but I'm still totally confused here. Not sure how to flash the files in. I downloaded Kies and both of the zip files from your post. Successfully updated the firmware and my error messages are gone, but I don't have CWM on it. I extracted your files, but now what? I'm not very technologically inclined so this is all Greek to me.
furboom1240 said:
You could also use Odin to flash a md5 sum of T699UVBMC5_HOME using the download mode of the Relay. Place in PDA, and tick off the Auto Reboot and F. Reset Time and hit start. Make sure you have the drivers required to do this. I think they're included with Kies. In my case, I used CWM to format /system, then I used download mode. However, I had to reset my device. AND CWM (plus root access) was erased after the stock restore. I didn't miss an important detail, did I?
Click to expand...
Click to collapse
furboom,
What is T699UVBMC5_HOME? How do I get the md5 sum of it? How do I use CWM to format /system? How do I get to stock restore? Again, I'm sorry for asking so many questions, i just have no clue what I'm doing here.
Thanks,
Rockin Rita
RockinRita said:
Magamo,
I'm sorry, but I'm still totally confused here. Not sure how to flash the files in. I downloaded Kies and both of the zip files from your post. Successfully updated the firmware and my error messages are gone, but I don't have CWM on it. I extracted your files, but now what? I'm not very technologically inclined so this is all Greek to me.
furboom,
What is T699UVBMC5_HOME? How do I get the md5 sum of it? How do I use CWM to format /system? How do I get to stock restore? Again, I'm sorry for asking so many questions, i just have no clue what I'm doing here.
Thanks,
Rockin Rita
Click to expand...
Click to collapse
If you don't have CWM, or some other custom recovery running on this, how did you get root in the first place? The easiest way to get root is to use heimdall or ODIN to flash CWM or another custom recovery, then flash Superuser or SuperSU using your new custom recovery.
The .zip files I linked are only meant to be flashed through recovery. Not Kies, not ODIN, not any other method.
Got it!!
With the help of this site (http://www.celldekho.com/how-to-unroot-samsung-galaxy-s-relay-4g/) and the file it linked to on rapidshare, along with your tip Magamo, I was able to unroot my Relay successfully. I'll reroot it later when I have the time and make sure not to delete important files LOL Thanks so much for the help!
So I have a j700p on boost, rooted it thanks to messi, installed xposed (credits to him too) and I'm using flashfire to flash zips. The problem is I want to install a custom rom and experiment with more risky things, which I'm too afraid to do because I can't backup and restore easily without a custom recovery.
Now I was doing some reading looking for guaranteed compatible roms for my phone, and a couple posts said that you don't need cr too install a custom rom since we have flashfire, however, that still doesn't cover backing up the phone and restoring without cr available. Should I brick my device or get it stuck in a boot loop I don't want to have to wipe and start with stock rom then reroot and install all my stuff again and again.
That leaves me stuck wondering what I should do. Should I just wait patiently while someone develops a cr for it (which I haven't seen anyone post about doing)? Or man up and hope some of these work? I really want to try to create a compatible twrp, but I know nothing about coding with xda, or with any language for that matter. I wouldn't know where to begin with it anyways.
Sorry if it seems like this isn't really a question but the above paragraph contains the questions I have.
Thx for reading!
What id do since its a custom rom and a custom roms dont require the userdata partition with the custom system. Stock roms require a userdata partition with the stock system to be flashed in a tar. id make a backup of the custom roms system, boot, and custom recovery in img format and then use unified toolkits basic toolkit to make the system and boot and custom recovery img a single odin flashable tar with the auto detect partitions option before it builds it.. test it just to make sure it flashes.
Partitions backup and restore..
https://play.google.com/store/apps/details?id=ma.wanam.partitions
Unifed toolkit
http://www.skipsoft.net/download/uat-v152/
Toolkit instructions.. download it.. extract it to c:... copy youre custom recovery and boot image and custom system imgs to unified toolkits input folder... go into unified toolkit run it the first time download some files then press 99 for basic tookit.. press 8 for make odin flashable tar... pick make single image of multiple images.... pick auto detect images.... let it build... exit once its done then go to unified toolkits output folder and there is you're odin flashable tar.
CoffeeNAndroid said:
What id do since its a custom rom and a custom roms dont require the userdata partition with the custom system. Stock roms require a userdata partition with the stock system to be flashed in a tar. id make a backup of the custom roms system, boot, and custom recovery in img format and then use unified toolkits basic toolkit to make the system and boot and custom recovery img a single odin flashable tar with the auto detect partitions option before it builds it.. test it just to make sure it flashes.
Partitions backup and restore..
https://play.google.com/store/apps/details?id=ma.wanam.partitions
Unifed toolkit
http://www.skipsoft.net/download/uat-v152/
Toolkit instructions.. download it.. extract it to c:... copy youre custom recovery and boot image and custom system imgs to unified toolkits input folder... go into unified toolkit run it the first time download some files then press 99 for basic tookit.. press 8 for make odin flashable tar... pick make single image of multiple images.... pick auto detect images.... let it build... exit once its done then go to unified toolkits output folder and there is you're odin flashable tar.
Click to expand...
Click to collapse
Thx for the fast reply like always coffee! That's the thing though, I'm on stock rom rooted and xposed, but I'm trying to get custom rom, but there's no custom recovery for boost mobile j7. I'm not worried about actually installing without the custom recovery (thank you once again chainfire) my issue is I can't restore any rooted backups on a bricked or bootlooping phone WITH that same bricked or bootlooping phone because because the recovery is stock, so the only option is to flash a stock rom back on, root it again, xpose it, then try again. The solution to this would be to make an Odin, adb, or fastboot flashable back up of the rooted stock rom I have now, but I can't make a flashable backup like that because there's no custom recovery to make one, do you see my dilemma?
Datipad said:
Thx for the fast reply like always coffee! That's the thing though, I'm on stock rom rooted and xposed, but I'm trying to get custom rom, but there's no custom recovery for boost mobile j7. I'm not worried about actually installing without the custom recovery (thank you once again chainfire) my issue is I can't restore any rooted backups on a bricked or bootlooping phone WITH that same bricked or bootlooping phone because because the recovery is stock, so the only option is to flash a stock rom back on, root it again, xpose it, then try again. The solution to this would be to make an Odin, adb, or fastboot flashable back up of the rooted stock rom I have now, but I can't make a flashable backup like that because there's no custom recovery to make one, do you see my dilemma?
Click to expand...
Click to collapse
You could make a stock tar rooted with stock recovery but youd have to include youre userdata partition since its on stock and you could do that with the toolkit and it would be odin flashable..
So do i have to use partitions backup and restore to get the partitions? because boot and recovery dont show up in the list, also my J7 isnt showing up on toolkit either with drivers installed and updated.
edit: Wont show up in windows explorer but shows in devices, tried switching to ptp mode and still no luck, trying to unistall driver and reinstall it but it looks like its also having trouble doing that
edit2: Got my phone to show up, and all is good with pc to phone connection, but the app still cant detect boot or recovery for some reason. I tried searching and so far i cant find anyone else who had the same problem, nor do any search results for that even exist. Ill keep trying though.