That damn can't downgrade message! - Samsung Galaxy S10e Questions & Answers

I tried to downgrade my phone to earlier Samsung firmware, but the download failed with "pit_flash_binary unsupported version". Now I wonder - would I get out of trouble if I installed some custom bootloader, then restored Samsung bootloader, then uploaded older firmware? If yes - can I get a link to some instructions?

Related

P3110 Bootloader Fail

I'm seeking help regarding the bootloader for my P3110:
>I can not install any new 4.1.2 roms because the bootloader fails in Odin (these new 4.1.2 firmwares seem to flash bootloader 1st)
>When I install older 4.1.1 firmware, the rom installs but the bootloader fails at the end although the device will boot normally after that.
>Codeworkx's bootloader (from CM10.1 page) will not install on odin either.. I just get an error message.
>Using triangle away on stock 4.0 and 4.1 will not work properly because of my bootloader issues.. (Modified status always comes back)
Maybe I could try flashing a CWM zip of the JB bootloader?? Could someone make or show me how to make one??
I've tried the obvious such as flashing back to ICS stock etc
Any help would be greatly appreciated as I would like to return the device to its original form... but I cannot do this as the device will not let me achieve any OTA updates (always says device has been modified)
Thanks
Matt

Unable to Change Bootloader (accidentally installed wrong bootloader) Galaxy S3 I747

Hello everyone,
I'm trying to install the latest Cyanogen Mod, but when I do, I get an assert error. I figured out through research that this is because the newest versions require an updated bootloader. So I naturally found the latest bootloader for my model and pushed it to my SD card to install it. However, when I try to install it with CWM, I get an error saying "You cannot flash from your current bootloader version. Current version: T999UVDLJA (Status 7).
I must have stupidly installed the wrong bootloader for my device? The strange thing is that my phone is a t-mobile phone, or so it says on the back, but the "about phone" section of my settings tells me it's the model SGH-I747, which is ATT. I bought it used, so I have no idea which it actually is. My question is, how do I change my phone's bootloader to the newer version so I can install the latest CM?
Thank you in advance!
EDIT
I have found that my model is definitely SGH-T999. It seems that my CWM is installed for ATT, and so is my current version of Slim Rom. I am unable to install the CM Rom due to the fact that my CWM doesn't accept tmo files, and my bootloader isn't compatible. So now what?

Odin flash failed, device 3, binary 2. Help needed!

Hi,
I have a G920F, I was rooted and want to go to stock again. I have restored the device with Smart Switch, but now I am unable to flash any other rom. I have downloaded 3 different roms from Sammobile and get sw. check failed device 3 binary 2 at everyone. The current rom is form Italy Wind the latest OI9. Any suggestions?
Thanks in advance.
Hi, probably you trying to install oldest firmware 5.0.1, download the latest firmware and try again. You are with 5.1, right? This error on odin happens, because you cannot downgrade the firmware. Hope this helps.
I think you can not downgrade even if it is the same Android version.
If it detects you are on a newer bootloader it will give you that error.
What I belive you can do is to extract the bootloader (sboot) and modem from the .tar file and flash ONLY the system through Odin.
Don't know exactly how to do that because I haven't done it but I think that would do; you will have to search and read my friend.
You will have the stock firmware but with latest bootloader and modem.
Hope this helps.
Note: As far as I know this will work if its the same Andorid version; you can not have Android 5.0.2 with 5.1.1 bootloader.
jpdediego said:
I think you can not downgrade even if it is the same Android version.
If it detects you are on a newer bootloader it will give you that error.
What I belive you can do is to extract the bootloader (sboot) and modem from the .tar file and flash ONLY the system through Odin.
Don't know exactly how to do that because I haven't done it but I think that would do; you will have to search and read my friend.
You will have the stock firmware but with latest bootloader and modem.
Hope this helps.
Note: As far as I know this will work if its the same Andorid version; you can not have Android 5.0.2 with 5.1.1 bootloader.
Click to expand...
Click to collapse
Hi,
I have tried what you said, but no succes. The firmware was already recovered with smart switch so the bootloader is the latest.
raj_p said:
Hi,
I have tried what you said, but no succes. The firmware was already recovered with smart switch so the bootloader is the latest.
Click to expand...
Click to collapse
But did you try to flash without the bootloader and modem?

Soft Bricked sm-g920f

Hi, I was running the latest noble rom (3,1) but I wanted to go back to stock samsung firmware. I downloaded and flashed a 6.0.1 firmware for the UK. When i was trying to flash it I got a error an now it wont boot. I get the error " Check device: 4, Binary: 3". I can get in to download mode but im not sure what firmware to flash
kLN93 said:
Hi, I was running the latest noble rom (3,1) but I wanted to go back to stock samsung firmware. I downloaded and flashed a 6.0.1 firmware for the UK. When i was trying to flash it I got a error an now it wont boot. I get the error " Check device: 4, Binary: 3". I can get in to download mode but im not sure what firmware to flash
Click to expand...
Click to collapse
Use the firmware for your region, e.g. country of issue and figure out the region code e.g. XFA, XFE, etc.
Ok so I had the same problem as you. When you get this error in download mode, it's because you can't downgrade your bootloader.
The version of TW you're trying to flash has an older bootloader than the bootloader you have already install.
You need to flash the latest version of TW. You can find it on Sammobile or with the soft Samfirm.

SM-G930F SW REV Check fail device 2 binary 1

Hey guys! I have a problem. I have flashed on my Galaxy S7 (Exynos version) the galaxy Note Fan Edition Port rom a couple of weeks ago, but now I flashed the latest stock firmware from Sammobile via odin and it always fails at the bootloader. I don't know why? I searched for many hours for a solution, but nothing works.... I hope somebody could help me
Here is the link for the note fan edition rom: https://forum.xda-developers.com/s7...-galaxy-note-fan-edition-port-vol1-0-t3633626
OEM unlock on?
Could also be that the latest bootloader prevents rolling back, so if you're trying to go from a newer bootloader to an older one it won't let you. You can probably just exclude the BL file and be fine.
Is that Fan Edition ROM you flashed not a S7 Edge rom made to work on the S7..! Maybe your phone shows up as a G935 now?
I have flashed android 8.0 manually from sammobile via odin and it got stuck on emergency recovery and I somehow got it into the download mode and every time I want to flash my stock firmware it says device 2 binary 1... I also flashed twrp recovery and wiped everything (system, data....) and tried again and it always fails in odin and says device 2 binary 1.. Im trying to find solution but everytime it fails. PLEASE HELP ME
daymonfeyenord said:
I have flashed android 8.0 manually from sammobile via odin and it got stuck on emergency recovery and I somehow got it into the download mode and every time I want to flash my stock firmware it says device 2 binary 1... I also flashed twrp recovery and wiped everything (system, data....) and tried again and it always fails in odin and says device 2 binary 1.. Im trying to find solution but everytime it fails. PLEASE HELP ME
Click to expand...
Click to collapse
Samething happened to me. I did the same thing u did but nothing worked.
Can someone plz help us to get odin download work again.
you should go for latest rom. download from here: https://samsung-firmware.org/model/SM-G930F/region/BTU/
You will be satisfy with this.
Hi! Same error but different situation.
I was on the latest firmware 8.0 ITV, I wanted to downgrade to nougat, so I downloaded the first 7.0 firmware BTU (the one that was the best for my S7).
I opened all the firmware files on odin 3.13.1 and I started the procedure but at a certain point everything stopped, on odin the message "failed" appeared and on the phone the message "sw rev check fail (bootloader) device 2 binary 1".
I tried with a different version of odin but the message remains the same, I also tried without flashing the BL file but nothing ... In the end I had to flash again the latest firmware oreo ITV and no errors appeared, but I find myself at the starting point
specific that my S7 has never had modding operations, the knox counter is perfectly at 0x0, I have always used only original firmware and never had problems with odin.
How can I downgrade without having in that error?
Hi just flash this version of latest nougat G930FXXS2DRDI, this is binary 2 firmware (XEO)

Categories

Resources