Hi, i have an S8+ (SM-G955FD), previously bootlooping, after it random turned off
Attempted to flash using odin v3.13, with diferent firmwares, even tried using .pit file with Nand-Erease and Re-Partition, EVERY FLASH ENDS WITH A PASS!
Every attempt after odin finishes ends with the device Stuck on 24% error on system install (bluescreen).
Out of ideas...
Thx In advanced!
Managed flash again with diferent firmwares but ends with the S8+ logo stuck
Anyone? Help
Related
Hello Guys,
A few days ago my s4 rebooted by itself and after that i was not able to boot it again. I can't boot into recovery mode but i am able to get in the download mode so i flash the stock firmware and pit file. I flashed kitkat on my phone and before it i had lollipop. After flashing the stock firmware the phone just didn't boot and i was not able to get into the recovery mode so i tried to flash the firmware again but the firmware didn't flashed successfully and i tried it for many times. So i changed my bootloader back to the lollipop one and now when i try to flash the firmware it starts and then stops on flashing system.img.ext4 and my phone lights turn off but odin still shows that my phone is connected and if i disconnect my phone it fails and then my phone has a message that firmware update encountered an issue but i am able to solve it by flashing the pit file. I don't know what is going on with my phone. any help will be appreciated.
I have a Samsung Galaxy S Duos GT-S7562 which stopped working with no warning a few months ago. The device has stock Samsung firmware and has never been rooted.
On power-up the device hangs on the Samsung logo.
When a charger is attached the battery charge animation is frozen.
Both stock recovery and download mode are working.
Attempted a factory reset and clear cache through recovery mode. Both showed as successful. Still hangs at Samsung logo.
Attempted to flash official Samsung stock firmware through Odin3. Flash succeeds with no error but restart still hangs at Samsung logo.
Attempted to flash TWRP recovery through Odin3. Flash succeeds with no error but recovery mode still comes up as stock rather than custom.
Why would Odin3 report a successful TWRP recovery flash but the device still boots the stock recovery? I have another identical S7562 that I successfully flashed the same TWRP recovery and Samsung stock firmware using the same setup, Odin3, PC and USB cable. Both are unlocked devices. Disabling auto-restart in Odin3 and attempting to boot straight to recovery after flashing doesn't help.
I suspect that a JTAG recovery may be my only option but from what I've read it should only be attempted if stock recovery and download mode are *not* working. In my case both appear to be working. Would a JTAG recovery help in this case?
Could there be some sort of NAND memory failure that does not result in any error messages during an Odin3 flash?
Thank you for any help!
I guess JTAG is the only way. Sorry.
I tried to flash TWRP on my S8+ and my phone got a bootloop . Then i tried to root it by Odin(SuperSU) and after the boot screen an error "Verification failed" came. Then I flashed the QF7 BL from Odin in the BL tab( which was a success in the first try), but then instead of a bootloop, the screen was stuck on the boot logo. I cant access TWRP now but can access download mode. I then tried to flash TWRP again but i cant access it( Odin shows successful).
Please help what can i do?? SM-G955F. OEM unlocked.
Thanks.
u need to flash BL,AP,CP,CSC (frimware ) files all together to get back to factory defaults
next time flash custom kernel using twrp after flashing twrp
Hi
My phone stuck at “firmware upgrade encountered an issue. Please select recovery mode in Kies“ and it neither boots nor goes to recovery mode but fortunately i can go to the download mode so i tried to flash official firmware but odin can not complete flashing and errors failed, i tried to flash twrp recover but it freezes and doesn't complete flashing so i tried to flash it via z3x samsung pro box and it can't complete flashing either! (for example during flashing, imaging boot.img size is 7mb flashing freeze at 6mb) and then errors timeout pop-up.
any solution?
is it hardware problem?
I really would appreciate if you help me
thanks
I tried to install a new original firmware with odin now but it just says pass! Then the phone restart and I have an error
how to solve this ?