Windows 11 Subsystem Android - No WiFi - General Questions and Answers

I have install the WIndows 11 Subsystem Android ("WSA") and has successfully sideloaded and installed some apks. However this apks require WiFi connection to work. Somehow there is no WiFi connection when running those apks. No issue on WiFi connection when running Windows apps.
I am residing in Asia and understand that currently the WSA is only for the US. Is there a way to make the the WiFi available for the WSA. I have tried VPN to US but still no WiFi connection.

Should got posted in Windows 11 forum.

https://www.reddit.com/r/WSApreview/comments/qdau99

Thanks. Tried both but nothing happen after keying in the command line.
No VirtWifi setting (gear icon) appears. But I have change the DNS 1 to 8.8.8.8 in Network setting but still no WiFi in WSA platform.

At last, I managed to get wifi working in WSA. Somehow the Windows HyperVision Platform was not ticked. After ticking and reboot, I got WiFi for WSA.
This is what I did.
1) Go to Search and type Turn windows features on or off
2) Scroll down and tick Windows HyperVision Platform
3) Reboot and install the HyperVision

I disabled advanced networking and wifi started working for me

Related

Cisco VPN on Nexus One

Dear all, I got my new Nexus One, rooted, with recovery ROM and with Modaco Custom ROM installed (without Add-On installed).
I installed also the VPN Connection but I cannot get it to work!
Anyone was succesfully get it to work on N1?
Or any other idea to get a VPN connection with a Cisco concentrator?
thank you
I would like that one as well!
I've installed the VPN connection from the market on top of Cyanogen's Baconmod and it worked the first time. I'm going back to my companies Cisco concentrator also.
I'm using a group password - make sure you set that up correctly... Connects over WiFi or 3G with no issues. I'm not certain if it works well with certificates.
I am unlocked, rooted, RA Recover, and N1 Addon. Once you get all of that setup then go to the market and download "VPN Connections - root".
It should work barring any unforeseen configuration on your work side like TCP vs UDP, connections port changes, or anything else that would be propagated by a configuration file.
But if you unlock, root, and have Cyanogen's N1 Addon you should be fine unless you have a config challenge.
Ntwrkwizard
Cisco VPN works but has issues
Nexus is my first Android phone and I just rooted and baconized. I was so conflicted, but I told myself it was inevitable. The phone has been solid for a week and I knew that when the first ROM dropped with multi-touch, I wouldn't be able to resist. Might as well get a head start, right?
First thing I did was install VPN Connections from the Market and setup a connection to my company Cisco ASA. I was totally stoked when I was able to connect and VNC into my office PC. After I was done. I went back into VPN Connections and disconnected from the VPN. My Internet (WIFI) access did not come back. Next I tried disabling the VPN from within the app. No dice. I then forced VPN Connections closed and still no good. I ended up disabling and re-enabling WIFI to get it my net connection back. Is this normal?
networking hosed after disconnecting VPN...
Posted this over in the apps section, before I saw this thread:
Nexus is my first Android phone and I just rooted and baconized. I was so conflicted, but I told myself it was inevitable. The phone has been solid for a week and I knew that when the first ROM dropped with multi-touch, I wouldn't be able to resist. Might as well get a head start, right?
First thing I did was install VPN Connections from the Market and setup a connection to my company Cisco ASA. I was totally stoked when I was able to connect and VNC into my office PC. After I was done. I went back into VPN Connections and disconnected from the VPN. My Internet (WIFI) access did not come back. Next I tried disabling the VPN from within the app. No dice. I then forced VPN Connections closed and still no good. I ended up disabling and re-enabling WIFI to get it my net connection back. Is this normal?
Does this program place a .pcf file anywhere on the phone? I have a pcf file from my work VPN, and the options that are in the UI are not quite enough to cover what all I need to enter. I looked all over the place for a pcf file, but couldn't find one. I know that the get-a-robot initial version of this program had one, but I don't know where this new version keeps it (if it does at all).
jchap2k
Cisco VPN
I have a question about Cisco VPN. i've not tried using it on an android phone, because I wasn't sure if the way my company's VPN works is supported. My company uses a token file that needs to be "installed" on the computer for the Cisco VPN. So the question is, would the Cisco VPN solution for Android support this?
Thank you
Using CM beta 4 rom with update from Google and this program FCs when trying to connect to vpn.
Any helpful hints would be great.
not sure on the fc, maybe try another rom/kernel.
i wasn't able to get this to work using any of the cyan roms so i must be doing something wrong.
my vpn works fine with the settings i've used for both vpn client (windows cisco client) and vpnc (fedora linux client) but when i press connect on android it will instantly say failed, is there a log available for this application?

[Q] How to connect to wifi 802.1x EAP ?

help me connect to eduroam pls
when i try to connect it says : "scanning ...."then "connecting ...." then "saved, secured with 802.1x"
Sensation XE
fw 3.25
rom : ARHD 6.2.1
ICS
same for me Sony
seems to be an android bug
-scanning-connecting-searching---- "disabled, secured with 802.1x eap"
this is my loop, and no connection at all
Same here :-(
iPhone users can connect fine to my company's 802.1x wifi network, but i can't from my android phones (SE Xperia X10 on Gingerbread & HTC Sensation on ICS)
A google search shows a lot of users having issue in connecting to 802.1x networks since Froyo (Android 2.2). There are worksrounds suggested, but they don't appear to work for me.
It seems the issue still exists in ICS as well :-(
Try LEAP WiFi free (it is in the market) or try to find one app for your comapny.
Leap WiFi works fine for me on IBM EAP APs.
Delete your old saved setting, before creating a new with Leap WiFi.
davebugyi said:
Try LEAP WiFi free (it is in the market) or try to find one app for your comapny.
Leap WiFi works fine for me on IBM EAP APs.
Delete your old saved setting, before creating a new with Leap WiFi.
Click to expand...
Click to collapse
will tests that
hope it will work
Huck33 said:
will tests that
hope it will work
Click to expand...
Click to collapse
Must be a bug in CM9, I'm having the same issue. Thinking about going back to CM7
bomczz said:
help me connect to eduroam pls
when i try to connect it says : "scanning ...."then "connecting ...." then "saved, secured with 802.1x"
Sensation XE
fw 3.25
rom : ARHD 6.2.1
ICS
Click to expand...
Click to collapse
Finally, I've defeated my CiSCO EAP-FAST corporate wifi network and now all our Android devices are able to connect to it.
The walkaround I've performed in order to gain access to this kind of networks from an Android device are easiest that you can imagine.
I'am a BES, MDM and Lotus Administrator, and btw and iOS lover.
Many of my colleages are Android users, and their claim is always the same.
Why iOS and BB users are able to connect to the corporate wireless network by chosing only WPA2 Enterprise and only needs the network SSID and their Active Directory Credentials?
2 years has passed since I heard this claim from my colleagues for the first time , and until yesterday, all of them remained disconnected even when they had ICS on their devices.
This things made me think about the Android and iOS system differences, and the way the OS developer thinks.
A wireless chipSet is a wireless chipset, and it not depends of the OS installed in a mobile device to have a better compatibility.( not like servers or routers ).
When you setup a Corporate wifi network on iPhone, basically you command the system to use some protocols to connect to, included in the WPA2 Enterprise cabinet. the system check all of the until find the right one to connect.
Android doesn't have the same protocols defined in his WPA2 Enterprise system definitions, so if you try to connect to it by using the main Android interface, you will have an authentication error.
There's a Wifi Config Editor in the Google Play Store you can use to "activate" the secondary CISCO Protocols when you are setting up a EAP wifi connection.
It's name is Wifi Config Advanced Editor.
Firstable you have to setup your wireless network manually as seemful as you can to your "official" corporate wifi parameters.
Save it.
Go to the WCE and edit the parameters of the network you have created in the previous step.
There are 3 or 4 series of settings you should activate in order to force the Android device to use them as a way to connect (the main site I think you want to visit is Enterprise Configuration, but don't forget to check all the parameters to change them if needed.
As a suggestion, even if you have a WPA2 EAP-FAST Cipher, try LEAP in your setup.
It worked for me as a charm.
When you finished to edit the config, go to the main Android wifi controller, and force to connect to this network.
DO NOT Edit the network again with the Android wifi interface.
Tested on Samsung Galaxy 1, 2 and Note mobile devices and on a Lenovo Thinkpad Tablet.
Gingerbread, Honeycomb and ICS.
May the force be with you, my young Padawan
Regards
Try the "Leap WIFI free" app from Play Store
Try the "Leap WIFI free" app from Play Store. Its an app provided by a developer called "OneGuyInABasement".
I was having the same issue where I couldn't connect to the (802.1x EAP based) Wifi network at my workplace.
I configured the network through this app and now I can connect just fine.
Leap WIFI free not working with JB 4.2.1
I have tried using Leap WIFI free on my Asus TF700T running the latest OTA update to JB (4.2.1).
While the tool seems to create a network profile, it does not even connect.
Trying to connect to a wifi network that shows up as Cisco EAP-FAST when I connect via my windows laptop
I've tried creating the profile using the built in wifi config editor as well, unfortunately it defaults to PEAP and while it connects and gets an IP address I do not have actual network access (e.g. web browsing fails).
The wifi ACE tool has not been updated to support JB yet either.
Any other suggestions?

[Q] Connect to OpenVPN + pem certificate + tap device

I want to connect my android device (nexus 7 2013) to an openvpn server which is not administrated by me, meaning I have no access on the configuration.
On my windows7-pc, I do this with the windows version of openvpn, the provided settings file for the openvpn server and the also provided pem-certificate.
Since the server uses the tap device of openvpn, alternative clients like openvpn for android by arne schwabe[1] don't work (this app doesn't support tap).
Since I don't have a private key file (*.key), I cannot generate a p12-file[2] which could be imported by the official openvpn app[3].
The pem-fileformat is compatible to *.cer and *.crt, meaning, I can simply change the file extension to "convert" them. The crt-file can be imported by the android systems (security -> import), but this doesn't help openvpn as it seems to only use it's own certificates.
Any suggestions on how to achieve a successful connection?
[1]: play.google.com/store/apps/details?id=de.blinkt.openvpn
[2]: blog.max.berger.name/2010/01/pem-fromto-p12.html
[3]: play.google.com/store/apps/details?id=net.openvpn.openvpn
wifi
i think if you have ICS_P740AV1.0.0B07 + you can't find open hot spot and if you can see you can't connect.
Try to make one hostop secured with wpa2 and try it.
k0tsompakos said:
i think if you have ICS_P740AV1.0.0B07 + you can't find open hot spot and if you can see you can't connect.
Try to make one hostop secured with wpa2 and try it.
Click to expand...
Click to collapse
Whoa, i only understand half of it
I have android 4.3 JSS15Q rooted with flo (?). I have superSU and Busybox installed. I followed the default instructions of the nexus root toolkit. My wifi is connected for sure, but it has blocked ports (which is the reason for all this). However, since I'm failing at an earlier stage, and, since it works from my pc from the same network with the same openvpn on the same ports I suppose the error is not in the network settings...
The wifi i'm connected to has wpa2+pkip etc. but I'm not sure how this is relevant...
rom
you have installed a custom rom?
you have try to enable and disable airplane mode?
you have data conenction?
k0tsompakos said:
you have installed a custom rom?
you have try to enable and disable airplane mode?
you have data conenction?
Click to expand...
Click to collapse
I have stock android rooted. I only have wifi and the connection works perfectly, I tried rebooting the device, I consider this counts as "dis/enable airplane mode". I have good wifi signal strength.
I have no issues accessing websites over port 80/443, only the blocked ports don't work. The openvpn server is reachable on port 443 (it works from my pc).
Hello,
did you ever manage to solve this? I'm looking to configure my nexus 7 2013 to connect to an OpenVPN server using TAP and it doesn't seem to be working. I'm using OpenVPN settings with certificate-based authentification. I'm able to connect to my server, however I don't get a local IP address assigned and when I browse the internet, my IP is still showing up as from the original connection instead of the VPN endpoint. Computers with windows 7 can connect to the server no-problem and all their traffic is directed to the tunnel. Any ideas for guides and walkthroughs?
Thanks. Any help is very much appreciated.

Android 10 + Vysor Pro

Good afternoon!!
I have been using the Vysor Pro application for several years, on my OnePlus 7 Pro for several months now.
I use it because I have a physical disability and that allows me to use the smartphone from the computer.
Normally I make the connection by Wi-Fi so as not to damage the battery by having USB connected and charging without stopping.
Since I upgrade to Android 10 I can connect it via USB, but when I try it over Wi-Fi, I get a message like the mobile phone is not connected to Wi-Fi, of course, the computer and mobile phone are connected to the same network and before the update it worked without problem.
After updating and seeing that it did not work, I did a factory reset and installed everything from scratch, as if it were a new terminal.
I wanted to ask you if you could give me a solution, to run Vysor connected by wifi?
I have written to the developer several emails and in more than 15 days I have not responded.
Thank you
Hi!! I wanted to ask if someone has come up with a solution or could you tell me how to contact the developer.
Greetings and thanks.
I just found this thread long after I got Vysor (and scrcpy) to work (almost) flawlessly on Android 11 (with USB setting up the initial adb connection and then switching to Wi-Fi thereafter)....
In early May I updated from Android 11 to Android 12 and I found out that Android 12 has a fantastic new Developer option "Wireless debugging" feature where you can set up the adb connection to the PC completely over Wi-Fi (no need for the initial USB connection!).
I just wanted people to know new information related to using Vysor completely over Wi-Fi (no USB connection is ever needed again!).
This always on Wi-Fi Vysor capability is new in Android 12 because Android 12 has a new Developer option for "Wireless debugging".
However, Android 12 also has a new Developer option for "Enhanced MAC Randomization" which randomizes the MAC address on every Wi-Fi connection, so with that added desired Wi-Fi simplicity in Android 12 comes also the added desired privacy of MAC randomization on every connection (the difference being Android 11 only randomized the MAC per SSID, as far as I understand it).
All this new Android 12 functionality has implications for your Vysor (and scrcpy) setup, based on my tests over the past couple of months.
Of course, if your router is using the MAC address to hand out the IP address you might need address reservation since the router can no longer expect a consistent MAC address if you set that new Android 12 Developer option but you can set the Android phone to request a "Static" IP address (if you want the adb connect commands to be consistent in the IP address in day to day usage).
I have found that rebooting the PC causes me to need to reconnect via an adb command on the PC before Vysor will work, and, for unknown reasons yet, often the Android 12 "Wireless debugging" switch gets turned off (mysteriously) - which affects the Vysor (and scrcpy) connections from one day to another.
It's no big deal once you figure out the commands and switches though, where the screenshots below show the settings I currently have on my unrooted Android 12 Samsung Galaxy A32-5G phone from T-Mobile (many of which are for privacy and functionality reasons).

[SOLVED] Syncing with Windows: Wifi OK, USB Tethering no longer OK

Hello,
I got a new smartphone running Android 12 through Evolution X — because the original ROM was stuck at Android 9.
Syncing an organizer app with Windows through USB tethering worked for a few days… and stopped working all of a sudden with its familiar "Connection error. Unable to connect. Check firewall settings on your computer."
"ipconfig" shows the USB tethering connection, and the IP + port # in Android match those used by the Windows appp.
Syncing through wifi works.
Exact same issue on another computer.
Disabling the firewall on the computer makes no difference.
Any idea where I could look? I wonder if I didn't enable/disable a feature by mistake.
Thank you.
---
Edit: Found it. I just had to sync once letting Windows use whatever IP it wanted, and then use it to assing the address manually.

Categories

Resources