Hi. So I flashed my realme C3 using the SP Flash Tool but I didn't realize that the option I chose was "Format All + Download". After I turn on my phone it says "Download not completed! Please press volume ....... Error Code: 0x992566". Is there any way to solve this problem?
pandmc said:
Hi. So I flashed my C3 realme using the SP Flash Tool but I didn't realize that the option I chose was "Format All + Download". After I turn on my phone it says "Download not completed! Please press volume ....... Error Code: 0x992566". Is there any way to solve this problem?
Click to expand...
Click to collapse
It's better try to find help in the same forum for your device https://forum.xda-developers.com/c/realme-c3.9977/ users may know better about it.
You never have to use the option Format All+Download, this formats the NVRAM partition, the calibration data, modem and much more, sometimes irremediably.
I'm going to save you hours of searching, at least to bypass the "download not complete..." search for an oppo_custom image; firstly, if you find one modded specific for your device would be a life-saver but if you don't find it, then any from other device would make the trick, you should keep trying it from various.
With this tool, https://github.com/bkerler/mtkclient, you will be able to flash it.
SubwayChamp said:
It's better try to find help in the same forum for your device https://forum.xda-developers.com/c/realme-c3.9977/ users may know better about it.
You never have to use the option Format All+Download, this formats the NVRAM partition, the calibration data, modem and much more, sometimes irremediably.
I'm going to save you hours of searching, at least to bypass the "download not complete..." search for an oppo_custom image; firstly, if you find one modded specific for your device would be a life-saver but if you don't find it, then any from other device would make the trick, you should keep trying it from various.
With this tool, https://github.com/bkerler/mtkclient, you will be able to flash it.
Click to expand...
Click to collapse
i got the same problem would you help me to fix mine my phone is realme c25
XDABLACKSHIP said:
i got the same problem would you help me to fix mine my phone is realme c25
Click to expand...
Click to collapse
Follow this forum https://forum.xda-developers.com/t/...-on-realme7-after-flashing-stock-rom.4250129/
Related
Please help me to fix my MT6589 HTC ONE clone. I factory reset my mobile. Then wipe cache using cwm. then restart. now its totally bricked. its not even charging. can't on. no light. no vibration. no recovery mode. even pc cant recognize the device. please help me to fix it. i just bought it. only a week.
I have the exact same problem, except my PC still recognizes it, I can't do anything else.
I'm not even able to make MTK tools nor SPFT recognize my phone...
A bit of help would grandly be appreciated :fingers-crossed:
Regards.
did you find an answer
dhcj said:
Please help me to fix my MT6589 HTC ONE clone. I factory reset my mobile. Then wipe cache using cwm. then restart. now its totally bricked. its not even charging. can't on. no light. no vibration. no recovery mode. even pc cant recognize the device. please help me to fix it. i just bought it. only a week.
Click to expand...
Click to collapse
I saw on another forum that you solved your problem. Could you tell me how you did it?
fixed it.
boulabloubla said:
I saw on another forum that you solved your problem. Could you tell me how you did it?
Click to expand...
Click to collapse
Hi everyone.
sorry for late reply.
I used this rom.
download from here.
pan.baidu.com/share/link?shareid=519096060&uk=1966208364
try it. if its not working I will explain step by step how i did it.
:good:
Sorry I couldn't answer earlier, I was kinda busy.
Thank you for your help, I'll try it and get back at you right away.
Cheers.
So, I tried the ROM, but it doesn't work, it gives me a message like Error DRAM (4032).
Could you explain me a little more please?
Thank you
boulabloubla said:
So, I tried the ROM, but it doesn't work, it gives me a message like Error DRAM (4032).
Could you explain me a little more please?
Thank you
Click to expand...
Click to collapse
can you sent me a picture of your mobile. i want to check is it same as mine.
Here they are.
step by step
boulabloubla said:
Here they are.
Click to expand...
Click to collapse
Okay. its exactly same as mine.
go to this link and download the .rar file.
dropbox.com/s/066vyfzgxe5b5fa/MT6577_root_tools_pack.rar
1.
there is a pdf file. read the pdf file carefully and follow the Step 1 only. (USB Drivers Installation) make sure you have install the drivers correctly.
download the original ROM.
dropbox.com/s/8kv93irrp8o8cpm/one%20english.rar
2.
Unplug the phone. open the folder named "SP_Flash_Tool" from the MT6577_root_tools_pack.
open "Flash_tool.exe" go to option selec "USB mode".
Select the scatter file from the original ROM. (second link)
SP_Flash_Tool -> Flash_tool.exe -> Scatter-loading -> MT6589_Android_scatter_emmc.txt
Then click "Format"
Format -> Automatic format flash -> Format whole flash except bootloader -> OK
then connect the switch offed phone. (it will automatically format the phone.)
After its done disconnect the phone.
close the SP_flash_tool.
3.
Unplug the phone. open the folder named "SP_Flash_Tool" from the first download.
open "Flash_tool.exe" go to option selec "USB mode".
Select the scatter file from the original ROM. (second link)
SP_Flash_Tool -> Flash_tool.exe -> Scatter-loading -> MT6589_Android_scatter_emmc.txt
then click " Firmware upgrade"
then connect the switch offed phone. (it will automatically upload the files to phone.)
it will take few minutes. then unplug the phone.
now try to switch on!
hope it will work for you.
good luck
:good:
Thanks for the help.
I did not entirely followed what you had, but I was able to flash the ROM you gave, thank you again good sir :laugh:, and I hope it will be useful for someone else.
Good day! :good:
boulabloubla said:
Thanks for the help.
I did not entirely followed what you had, but I was able to flash the ROM you gave, thank you again good sir :laugh:, and I hope it will be useful for someone else.
Good day! :good:
Click to expand...
Click to collapse
can you use your phone now?
Hello everyone, I have a problem with a htc one of my friend. the phone has no operating system, no longer appears when you turn on anything. how can I do to flash boot, recovery, and all the rest?
the phone will not turn off, you have to wait for it drains the battery.
I apologize for my English
thanks
Bricked HTC one clone MT6589
Hello everybody!
I have the same issue my HTC One clone MT6489 does not work since I flashed the boot image (I know...).
I have followed all the steps mentionned above and my screen stays back when I reboot.
Maybe I misse sonething.
Anybody can help?
D.
Reboot loop
To be more precise, any boot image or wahtever I put, I have a reboot loop...
sir i have a hard time following the concern , after choosing the scatter "MT6589_Android_scatter_emmc.txt" then try to press the download button it seems download not starting. can you help me with this sir?
after of a purple loading its stock from 0% loading, and no yellow loading.
I am sorry if this is the wrong group for this topic to discuss, I created the account for this specific problem I am having. If am wrong then please do guide me in the right direction.
So, I have a S4 mini Clone from mediatek first of all I am confused about the model. When I used the system info app it said hardware - 6572 and something else was there it said 6589_wet so what is the correct number to follow.
Now, the problem is that I rooted that device using MTKDroid and I guess I didnt chosed a right option for recovery. One day after rooting I restarted the device and it fell into bootloop then I went for recovery menu and tried to wipe partition cache and even wipe user data. It didn't work. Then, I copied the recovery backup file from my computer (which MTKDroid creates) to microSD card and tried to recover from sdcard. Even that didnt work, then I used another method which involves formatting using SPflash, even that didnt work I guess the scatter file was corrputed because SPflash sent an error message saying " the load and target are inconsistent " and the bar turned red.
Anyone with same problem got solved or anybody having any solution or even the correct rom for my device, I'd appreciate the help.
Kingtopkt072 ROM needed
Hi
Thanks for the great job done on your website.
My KingtopKt072 MT6572 is bricked, and I’ve been unsuccesfully looking for it all over Internet. Can someone please save my phone by sending me a link to download and recover my device? It’s got 512 RAM and it’s dual sim.
Thank you.
abhinavnain said:
I am sorry if this is the wrong group for this topic to discuss, I created the account for this specific problem I am having. If am wrong then please do guide me in the right direction.
So, I have a S4 mini Clone from mediatek first of all I am confused about the model. When I used the system info app it said hardware - 6572 and something else was there it said 6589_wet so what is the correct number to follow.
Now, the problem is that I rooted that device using MTKDroid and I guess I didnt chosed a right option for recovery. One day after rooting I restarted the device and it fell into bootloop then I went for recovery menu and tried to wipe partition cache and even wipe user data. It didn't work. Then, I copied the recovery backup file from my computer (which MTKDroid creates) to microSD card and tried to recover from sdcard. Even that didnt work, then I used another method which involves formatting using SPflash, even that didnt work I guess the scatter file was corrputed because SPflash sent an error message saying " the load and target are inconsistent " and the bar turned red.
Anyone with same problem got solved or anybody having any solution or even the correct rom for my device, I'd appreciate the help.
Click to expand...
Click to collapse
Hey abhinavnain, did you find an answer to your question?
Hi,
I have root my phone. disabled some unnecessary apps, but i decided to factory reset, but when i open the phone top and bottom buttons were gone, no notifications. Now I cant do anything. How can i restore the whole OS back?
I have bring the stock recovery back but now i stuck!
now i cannot enter to bootlader
Trying with adb but it says not authorized. Authorize notify cant appear on screen i think its because huawei home not work properly.
And I cant even install anything from google play or local apk.
I think its bricked please help...
http://forum.xda-developers.com/showthread.php?t=3075332
did you try this?
Sent from my HUAWEI MT7-TL10
Easy Computer said:
http://forum.xda-developers.com/showthread.php?t=3075332
did you try this?
Sent from my HUAWEI MT7-TL10
Click to expand...
Click to collapse
Hi,
I have tried almost every steps except latest version update, because there is no latest version on Huawei Turkish website, latest one shows B133 but mine was B137, so it gives an error while starting the update from dload folder.
Hisuite doesnt recognize the phone.
Now I am downloading Huawei MT7-L09 CEE&Nordic European Channel V100R001C00B137SP03 Android 4.4.2 EMUI 3.0 This is not Turkish version but i hope I can install it with 3 button update procedure...
No luck...
It gave me "software install failed" error...
Now im scared to factory reset my phone... I hope you get to find a solution bro.
EzerchE said:
No luck...
It gave me "software install failed" error...
Click to expand...
Click to collapse
Easy Computer said:
Now im scared to factory reset my phone... I hope you get to find a solution bro.
Click to expand...
Click to collapse
Hi, i find a solution,
actually i find a way to enter fastboot mode without inside of android os.
connect mate 7 to pc, while its connected press 3 buttons and hold,
it will open in recovery mode adb,
then command: fastboot bootloader
you are in fastboot.
But now i bricked it so bad mistakenly.
Its enters looped rescue mode but it doesnt connects to fastboot.
But i have find a solution for it too.
While its in bricked rescue mode press and hold Volume down + power buttons,
it will enters to fastboot mode.
Now i am trying to flash files to repair rescue mode but i still didnt find how to repair it...
If you are in fadtboot mode you should be able to flash the stock recovery (the correct one!!!) via adb command. Then try 3buttons procedure. Please be carefull with the sd card, since most of them don't work in 3b mode. Try several btand of SD.
i hope you get it to work again. good luck bro :good:
EzerchE said:
Hi, i find a solution,
actually i find a way to enter fastboot mode without inside of android os.
connect mate 7 to pc, while its connected press 3 buttons and hold,
it will open in recovery mode adb,
then command: fastboot bootloader
you are in fastboot.
But now i bricked it so bad mistakenly.
Its enters looped rescue mode but it doesnt connects to fastboot.
But i have find a solution for it too.
While its in bricked rescue mode press and hold Volume down + power buttons,
it will enters to fastboot mode.
Now i am trying to flash files to repair rescue mode but i still didnt find how to repair it...
Click to expand...
Click to collapse
tuddu said:
If you are in fadtboot mode you should be able to flash the stock recovery (the correct one!!!) via adb command. Then try 3buttons procedure. Please be carefull with the sd card, since most of them don't work in 3b mode. Try several btand of SD.
Click to expand...
Click to collapse
Hi,
I flashed stock: boot.img, recovery.img, custom.img, system.img and cache.img inside from fastboot mode but no luck...
It gives this error immediately after reboot:
Error!
Func NO: 12 (FUNC_LOAD_IOM3)
Error NO: 1
And can't enter 3 buttons upgrade procedure
I think some system files are missing and it doesnt boot or enter to recovery mode...
Its so sad there is not so much users and professional support about Mate 7. I find the ways to enter bootlader without entering the OS by myself.
But its so easy to brick the phone so all users be very careful when flashing recovery and wiping the phone. As for as i know there is no way to fix my problem even by Huawei technical services. (A guy from another forum, sent his bricked Mate7, they returned the money to him he tolds..)
I could'nt repair the phone so I returned it to seller, thanks for the seller's return policy 14 day no rules accepts return. So I sent my device to seller and returned my money back. I dont know which device should I get.
Good luck all.
EzerchE said:
Its so sad there is not so much users and professional support about Mate 7. I find the ways to enter bootlader without entering the OS by myself.
But its so easy to brick the phone so all users be very careful when flashing recovery and wiping the phone. As for as i know there is no way to fix my problem even by Huawei technical services. (A guy from another forum, sent his bricked Mate7, they returned the money to him he tolds..)
I could'nt repair the phone so I returned it to seller, thanks for the seller's return policy 14 day no rules accepts return. So I sent my device to seller and returned my money back. I dont know which device should I get.
Good luck all.
Click to expand...
Click to collapse
Hi Ezerche. I'm so sorry your phone got bricked and you couldn't repair... I don't know how to root and I couldn't help you. What did you do wrong? I saw on this forum other users who had successfully rooted mate 7.
Now I think I will never root this phone, my 30 days return policy has expired. SO there was no way to repair your phone?
I found your problem on an chinese forum: https://translate.google.ro/transla....vmall.com/thread-3432260-1-1.html&edit-text=
and in italian forum : https://translate.google.ro/transla...mate-7-rescue-mode.html#post344249&edit-text=
You got lucky because you got your money back. What did you told them what happend with the phone? You told them the truth or something else?
If you can live without root you can get another mate 7.
alexre123 said:
Hi Ezerche. I'm so sorry your phone got bricked and you couldn't repair... I don't know how to root and I couldn't help you. What did you do wrong? I saw on this forum other users who had successfully rooted mate 7.
Now I think I will never root this phone, my 30 days return policy has expired. SO there was no way to repair your phone?
I found your problem on an chinese forum: https://translate.google.ro/transla....vmall.com/thread-3432260-1-1.html&edit-text=
and in italian forum : https://translate.google.ro/transla...mate-7-rescue-mode.html#post344249&edit-text=
You got lucky because you got your money back. What did you told them what happend with the phone? You told them the truth or something else?
If you can live without root you can get another mate 7.
Click to expand...
Click to collapse
Hi Alex,
I have rooted my phone, problem happened while i am wiping the boot, system and cust from CWM Recovery before the install new rom. I think its deleted something about sensors (on chinese forum they talking about iom3 error is related with sensors)
So phone didnt boot again.
I returned it to seller without any excuse. I just said I didnt satisfied with the phone. And they accept return and paid the money back in same day.
Ok, i have a doogee x5 pro phone and i tried to root it by flashing twrp recovery using sp flash tools. While flashing i got the error "PMT Changed for the rom it must be download". So i did a small research on internet and i found out that i needed to format everything except bootloader. This succeded. So after that i tried to install the firmware with this succeding to. Unfortunately the time i tried to turn phone on it was dead. SP Flash Tools wont detect it anymore. Please help me cause the phone is not mine and its brand new! I can rate my self as moderate android user. :crying:
i think i have a bigger problem... I downloaded a stock rom for doogee max pro(cause i just realised it wasnt just pro it was max pro) and it didnt seem to be recognised again. Any help would be appreciated. I constantly keep trying to raise it from the deads. Thanks!
Ap0s said:
i think i have a bigger problem... I downloaded a stock rom for doogee max pro(cause i just realised it wasnt just pro it was max pro) and it didnt seem to be recognised again. Any help would be appreciated. I constantly keep trying to raise it from the deads. Thanks!
Click to expand...
Click to collapse
On mtk devices a preloader is independently installed, it should be almost impossible to destroy, I owned a x5 pro and had best success to flash it with sp flash by taking out the battery, press flash button and plug it in...
The second huge issue I see is when you used the specific flash tool format option you very, very likely killed the nvram partition which contained the imei, so you'll have to fix this too by generating a new one and using mtk engineer mode which is well described and to find on Google..
But let's go step by step. Check without battery, or if it's a non replaceable you'll need find the reset button..
i have tried before without battery and i tried just now but nothing. Its very weird it was detected before and now no in same and another machine. I am pretty confused and stressed. Hope i didnt do any physical damage.. :crying:. THANKS!
starting to get pretty stressed omg! and is there a difference between MT6737M and MT6737?
i came to the point im starting to lose my mind... tried everything i could, i have 5 days left to repair this phone and i dont wanna pay 85 euros for this. SP Flash Tools wont detect the phone. Tried almost 5 different scatter files,2 different PCs and different mtk drivers. Im losing my mind already
UPDATE: I almost fixed it! I had flashed wrong preloader so phone wasn't recognized by SP Flash Tool. I fixed preloaded with a little trick from here: link. After that i flashed stock rom downloaded from doogee.cc but phone will not boot resulting in a total black screen. When i hot Power + Vol Up it takes me to another screen:
Select Boot Mode:
Recovery
Bootloader
Normal
Doesn't matter which boot mode i choose i just get a total black screen which means i get nothing. Idk what is happening! Any further help would be appreciated! I constantly try to bring it back working with little success and small improvements.
Last UPDATE: FIXED my phone had no juice left inside so couldnt complete boot proccess. Now its all good running Btw someone must pin this META trick link i send on my previous post cause im sure more people out there have preloader issues!!! Thank you everyone!!
Sam Nakamura said:
On mtk devices a preloader is independently installed, it should be almost impossible to destroy, I owned a x5 pro and had best success to flash it with sp flash by taking out the battery, press flash button and plug it in...
The second huge issue I see is when you used the specific flash tool format option you very, very likely killed the nvram partition which contained the imei, so you'll have to fix this too by generating a new one and using mtk engineer mode which is well described and to find on Google..
But let's go step by step. Check without battery, or if it's a non replaceable you'll need find the reset button..
Click to expand...
Click to collapse
And yes i couldnt flash it with battery only with!
Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
f_magsi said:
Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
Click to expand...
Click to collapse
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
thanks brother, it worked.
f_magsi said:
thanks brother, it worked.
Click to expand...
Click to collapse
I'm glad to see your device is working again. Please post the screenshot here.
mvikrant97 said:
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
Click to expand...
Click to collapse
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
f_magsi said:
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
Click to expand...
Click to collapse
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
mvikrant97 said:
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
Click to expand...
Click to collapse
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
w1n73rf3ll said:
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
Click to expand...
Click to collapse
I don't have Chimera tool to test.
Why do you need the chimera tool?
its a phone repair program ... i tried with others tools and no luck