Database Info

[Q] Fastboot Linux

Ive been trying to get TWRP loaded on to my TF300T on 4.2.1 using this guide but on the fastboot its stuck on waiting for device. The device is recognised in the Terminal but have no luck flashing the recovery. Is there any other methods for flashing a recovery I can use on linux or advice.
Im running Xubuntu 13.04

mackay508 said:
Ive been trying to get TWRP loaded on to my TF300T on 4.2.1 using this guide but on the fastboot its stuck on waiting for device. The device is recognised in the Terminal but have no luck flashing the recovery. Is there any other methods for flashing a recovery I can use on linux or advice.
Im running Xubuntu 13.04
Click to expand...
Click to collapse
Is your OS 32 or 64-bit? If it's 64, you may need to have both ia32-libs and ia32-libs-dev installed for fastboot to work properly. Also, did you get the android-tools packages from the repos? I'm not sure about the *buntus, but on Debian, they're in the unstable repos. Make sure you have the newest versions (trust me; it matters).
If you want to do it via ADB, you could do this:
Code:
adb shell
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p4
Make sure the recovery image is on your internal storage if you do it that way.
I recommend trying to get fastboot working, and use ADB as a last resort.

Its 32-bit, I used fastboot for my N4 so unsure why its not working just now. I tried the method you said but think i may ahve done it wrong it completed the operation but got the Android on its back with the red triangle :/
First time i got :-
1|[email protected]:/ # dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p4
12896+0 records in
12896+0 records out
6602752 bytes transferred in 5.185 secs (1273433 bytes/sec)
Then after that i got :-
127|[email protected]:/ $ dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p4
/dev/block/mmcblk0p4: cannot open for write: Permission denied
ry.img’: No such file or directory <
/system/bin/sh: dd:: not found
127|[email protected]:/ $ dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p4
/dev/block/mmcblk0p4: cannot open for write: Permission denied
1|[email protected]:/ $

mackay508 said:
Its 32-bit, I used fastboot for my N4 so unsure why its not working just now. I tried the method you said but think i may ahve done it wrong it completed the operation but got the Android on its back with the red triangle :/
First time i got :-
1|[email protected]:/ # dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p4
12896+0 records in
12896+0 records out
6602752 bytes transferred in 5.185 secs (1273433 bytes/sec)
Then after that i got :-
127|[email protected]:/ $ dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p4
/dev/block/mmcblk0p4: cannot open for write: Permission denied
ry.img’: No such file or directory <
/system/bin/sh: dd:: not found
127|[email protected]:/ $ dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p4
/dev/block/mmcblk0p4: cannot open for write: Permission denied
1|[email protected]:/ $
Click to expand...
Click to collapse
Stupid question probably, but is your tablet unlocked?
Also, for the second one, you weren't logged in as root. You need to be root to write the image.
Linux 101:
- If you see a dollar sign ($) in the terminal, you're a normal, unprivileged user
- If it's a pound sign (#), you're root.
Also, like I said before, the version of Fastboot matters. Way back in August, I soft-bricked my tablet, and fastboot gave me the same problem it's giving you, even though I had used fastboot on my tablet before that. Months later, I found the fastboot in the Debian repos. I'm not sure what the difference was between the versions, but the new one from the repos worked perfectly, and I was able to get my tablet working again.

EndlessDissent said:
Stupid question probably, but is your tablet unlocked?
Also, for the second one, you weren't logged in as root. You need to be root to write the image.
Linux 101:
- If you see a dollar sign ($) in the terminal, you're a normal, unprivileged user
- If it's a pound sign (#), you're root.
Also, like I said before, the version of Fastboot matters. Way back in August, I soft-bricked my tablet, and fastboot gave me the same problem it's giving you, even though I had used fastboot on my tablet before that. Months later, I found the fastboot in the Debian repos. I'm not sure what the difference was between the versions, but the new one from the repos worked perfectly, and I was able to get my tablet working again.
Click to expand...
Click to collapse
Yeah I unlocked it using the unlocker app and have the this device is unlocked at the boot screen. Forgot the su part :/ what i get for using the up button haha. Yeah it came up with grant superuser access on my tablet, I deleted and reinstalled fastboot the other day to see if it would help but it didnt. Might have to wait until i can access a Windows laptop :/

Sorry I couldn't help. Those are the most common problems/solutions I've seen and personally experienced. And I have no idea why dd didn't work in ADB Shell. I would check the recovery image and try again. Check out adb --help to see if there are any other options available. I'm not overly familiar with ADB.
You could also flash the recovery while booted into Android using Terminal Emulator. That's how I usually flash recoveries. Just use the dd method from the ADB Shell instructions. Just skip the first command, starting ADB Shell, and start at su.
Oh, and I completely missed it earlier, but make sure that the recovery you're using ends in -42.img or - 42.blob. If you use one with -JB, you could brick your tablet. I don't know why the guy giving instructions in your link said to use -JB, but there have literally been dozens of bricked tablet threads here because people flashed a -JB recovery on a 4.2 bootloader. -JB recoveries should only be used with the 4.1 bootloader.

EndlessDissent said:
Sorry I couldn't help. Those are the most common problems/solutions I've seen and personally experienced. And I have no idea why dd didn't work in ADB Shell. I would check the recovery image and try again. Check out adb --help to see if there are any other options available. I'm not overly familiar with ADB.
You could also flash the recovery while booted into Android using Terminal Emulator. That's how I usually flash recoveries. Just use the dd method from the ADB Shell instructions. Just skip the first command, starting ADB Shell, and start at su.
Oh, and I completely missed it earlier, but make sure that the recovery you're using ends in -42.img or - 42.blob. If you use one with -JB, you could brick your tablet. I don't know why the guy giving instructions in your link said to use -JB, but there have literally been dozens of bricked tablet threads here because people flashed a -JB recovery on a 4.2 bootloader. -JB recoveries should only be used with the 4.1 bootloader.
Click to expand...
Click to collapse
Thanks for the help anyway, yeah just glad i read up on the recoveries before hand incase it worked and i got bricked. Ill try using the terminal and see if that works

RUU File for RADIO-26.17.14.11_M

Hi,
I have the HTC Inspire 4g with:
Software #: 3.20.502.52 710RD
Android Version 2.3.5
HTC Sense 3.0
Baseband version: 12.69a.60.29u_26.17.14.11_M
I have unlocked the bootloader using htcdev and have successfully rooted the the device but i'm still S-ON. I have tried installing some custom ROMs however after flashing the device did not boot. I understand that I have to flash the boot.img file located in the .zip file of the custome ROM. That I know how to do... My concern is that I want to try out some ROMs but as a precaution I would like to have the stock RUU file for the type device I have should I need to restore it.
I did create a backup of my ROM and have used it previously to restore the phone after installing the custom roms that haven't boot. I just want to know if I flash the boot.img file will a restore bring it back to where it was before the flash or do i need the RUU file to restore stock?
If the later please advice where I can find that particular file as I've searched but can't seem to find the one to use.
Thanks a million.
360fifa

360fifa said:
Hi,
I have the HTC Inspire 4g with:
Software #: 3.20.502.52 710RD
Android Version 2.3.5
HTC Sense 3.0
Baseband version: 12.69a.60.29u_26.17.14.11_M
I have unlocked the bootloader using htcdev and have successfully rooted the the device but i'm still S-ON. I have tried installing some custom ROMs however after flashing the device did not boot. I understand that I have to flash the boot.img file located in the .zip file of the custome ROM. That I know how to do... My concern is that I want to try out some ROMs but as a precaution I would like to have the stock RUU file for the type device I have should I need to restore it.
I did create a backup of my ROM and have used it previously to restore the phone after installing the custom roms that haven't boot. I just want to know if I flash the boot.img file will a restore bring it back to where it was before the flash or do i need the RUU file to restore stock?
If the later please advice where I can find that particular file as I've searched but can't seem to find the one to use.
Thanks a million.
360fifa
Click to expand...
Click to collapse
RUU 3.20.502.52

Thank you kindly for taking the time to respond and also help.

Hi Gizmoe,
is there a rooted and s-off RUU file I could use as well?
Thanks again..

360fifa said:
Hi Gizmoe,
is there a rooted and s-off RUU file I could use as well?
Thanks again..
Click to expand...
Click to collapse
RUU 's can not be modified. You will not lose s off however by running an ruu. After you run ruu just pd98img a recovery and flash away.

Gizmoe said:
RUU 's can not be modified. You will not lose s off however by running an ruu. After you run ruu just pd98img a recovery and flash away.
Click to expand...
Click to collapse
So are you saying that I would need to unlock the bootloader again then following the same steps I have now? I had the impression based off could threads I've read that there's a way to root the device while gaining S-OFF that will allow me to avoid having to manually flash the boot.IMG everytime i install a custom rom. If there's a thread I can read or a guide to follow please provide a link so that I can proceed. Oh, does all the pd98img file the same?
Thanks again.
360fifa

360fifa said:
So are you saying that I would need to unlock the bootloader again then following the same steps I have now? I had the impression based off could threads I've read that there's a way to root the device while gaining S-OFF that will allow me to avoid having to manually flash the boot.IMG everytime i install a custom rom. If there's a thread I can read or a guide to follow please provide a link so that I can proceed. Oh, does all the pd98img file the same?
Thanks again.
360fifa
Click to expand...
Click to collapse
Yeah that's right. Your not s off. Well here is the only method left for the inspire. It may be a bit intimidating but really isn't that hard. Here is link.
http://tau.shadowchild.nl/attn1/?cat=6

Gizmoe said:
Yeah that's right. Your not s off. Well here is the only method left for the inspire. It may be a bit intimidating but really isn't that hard. Here is link.
Click to expand...
Click to collapse
Your're right very intimidating, however I'm willing to try my only concern is what is dd highlighted below "High Level Steps (some detail deliberately NOT included)
htc dev unlock, install cwm recovery and root ONLY
dd the stock boot image to /data/local/tmp and pull it to your pc HD (/dev/block/mmcblk0p22 is boot)
adb shell dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img"?
Also i navigated to the folder on my device however it doesn't show any boot.img file. Just a init.rc file. Could you explain just this part of it please?
Thanks again,
360fifa

360fifa said:
Your're right very intimidating, however I'm willing to try my only concern is what is dd highlighted below "High Level Steps (some detail deliberately NOT included)
htc dev unlock, install cwm recovery and root ONLY
dd the stock boot image to /data/local/tmp and pull it to your pc HD (/dev/block/mmcblk0p22 is boot)
adb shell dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img"?
Also i navigated to the folder on my device however it doesn't show any boot.img file. Just a init.rc file. Could you explain just this part of it please?
Thanks again,
360fifa
Click to expand...
Click to collapse
DD is copy and convert. It will copy boot files and convert it into boot.img. Use adb shell to do it as shell works within phone directories. Then pull it from pc using adb pull. He is giving you the exact adb commands to do both.
Code:
adb shell
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img

Gizmoe said:
DD is copy and convert. It will copy boot files and convert it into boot.img. Use adb shell to do it as shell works within phone directories. Then pull it from pc using adb pull. He is giving you the exact adb commands to do both.
Code:
adb shell
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img
Click to expand...
Click to collapse
Lol... I figured those were the commands to use, was just wondering what dd stand for.. ( copy and convert ). So let me see if i understand whats happening in the code.
So firstly I need to have the the HTC drivers installed and have the Android SDK on the root of c drive. Basically the same folder used when I unlocked to bootloader. In that folder I have the adb files, should I also add the files listed in the zip file he provided? If so let me explain the code, if no please shed some light.
So adb shell starts the emulator with the device
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot will copy and convert the mmcblk0p22 file if it is found in the /dev/block folder on the device and place it to the /data/local/tmp/ folder and call it boot.img
adb pull /data/local/tmp/boot.img I'm thinking that the computer is going to pull the boot.IMG file from the /data/local/tmp folder however where is it putting it? In the same folder that I started the command prompt from? That is the Android folder on my c drive?

360fifa said:
Lol... I figured those were the commands to use, was just wondering what dd stand for.. ( copy and convert ). So let me see if i understand whats happening in the code.
So firstly I need to have the the HTC drivers installed and have the Android SDK on the root of c drive. Basically the same folder used when I unlocked to bootloader. In that folder I have the adb files, should I also add the files listed in the zip file he provided? If so let me explain the code, if no please shed some light.
So adb shell starts the emulator with the device
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot will copy and convert the mmcblk0p22 file if it is found in the /dev/block folder on the device and place it to the /data/local/tmp/ folder and call it boot.img
adb pull /data/local/tmp/boot.img I'm thinking that the computer is going to pull the boot.IMG file from the /data/local/tmp folder however where is it putting it? In the same folder that I started the command prompt from? That is the Android folder on my c drive?
Click to expand...
Click to collapse
You will want to work out of the platform-tools directory.
Yes adb pull will always pull to your working directory unless another path is specified. Adb shell will need root. So if you type adb shell and don't see a # sign type su to get it. When done in adb shell you will need exit so you can pull to computer. If you had to take two steps to get a # prompt then you will type exit twice.

Gizmoe said:
You will want to work out of the platform-tools directory.
Yes adb pull will always pull to your working directory unless another path is specified. Adb shell will need root. So if you type adb shell and don't see a # sign type su to get it. When done in adb shell you will need exit so you can pull to computer. If you had to take two steps to get a # prompt then you will type exit twice.
Click to expand...
Click to collapse
Kool, thats the directory i'm referring to... I'm sure i'm already rooted. But your saying that when i send the command "adb shell" if I don't see the # sign then i should type su. Are you then saying that if I had to type su twice then I need to hit exit twice to pull to pc?
Oh before I forget should i run ruu before attempting this or remain as is? Also, do I need cmw recovery installed or can i remain on twrp 2.6.0.0?
Thanks again bro..
360fifa

360fifa said:
Kool, thats the directory i'm referring to... I'm sure i'm already rooted. But your saying that when i send the command "adb shell" if I don't see the # sign then i should type su. Are you then saying that if I had to type su twice then I need to hit exit twice to pull to pc?
Oh before I forget should i run ruu or remain as is?
Thanks again bro..
360fifa
Click to expand...
Click to collapse
Yes you would need to type su to see #. Adb shell root access works independently of phone root. It needs root access over adb which without an UN-secure boot img will need the su command. Exit for each level. Once for su and once for shell itself. You want to exit until you are back at Windows directory. Adb shell is at the phones root directory. The dd command is moving files within the phone, while Adb pull would be used to copy from phone to pc. I would not run that ruu if you are going to try and s off. I would run 2.47.502.7. Which I posted a link in the att stock Rom thread.
---------- Post added at 05:35 PM ---------- Previous post was at 05:33 PM ----------
http://forum.xda-developers.com/showthread.php?p=50027824

Gizmoe said:
Yes you would need to type su to see #. Adb shell root access works independently of phone root. It needs root access over adb which without an UN-secure boot img will need the su command. Exit for each level. Once for su and once for shell itself. You want to exit until you are back at Windows directory. Adb shell is at the phones root directory. The dd command is moving files within the phone, while Adb pull would be used to copy from phone to pc. I would not run that ruu if you are going to try and s off. I would run 2.47.502.7. Which I posted a link in the att stock Rom thread.
---------- Post added at 05:35 PM ---------- Previous post was at 05:33 PM ----------
http://forum.xda-developers.com/showthread.php?p=50027824
Click to expand...
Click to collapse
Do i need to run a ruu or can I proceed as is? If so u recommend running the 2.47.502.7 ruu before going thru the adb commands, y?
Thanks again..

360fifa said:
Do i need to run a ruu or can I proceed as is? If so u recommend running the 2.47.502.7 ruu before going thru the adb commands, y?
Thanks again..
Click to expand...
Click to collapse
Yes go ahead and proceed as is. You should not have any issues. If not successful then try ruu. You may not be able to run the older ruu if your bootloader is newer. Which in that case just run the newer one. I beleive I used this process on a phone with the newer software but the older works for sure.

Gizmoe said:
Yes go ahead and proceed as is. You should not have any issues. If not successful then try ruu. You may not be able to run the older ruu if your bootloader is newer. Which in that case just run the newer one. I beleive I used this process on a phone with the newer software but the older works for sure.
Click to expand...
Click to collapse
Gizmoe you have been very patient and very helpful i thank you a million times. If i encounter any other issues I'll definitely let you know.
Thanks again..
360fifa

360fifa said:
Gizmoe you have been very patient and very helpful i thank you a million times. If i encounter any other issues I'll definitely let you know.
Thanks again..
360fifa
Click to expand...
Click to collapse
I encountered an issue while trying to pull the boot.img file from /data/local/tmp/. The command used was adb pull /data/local/tmp/boot.img I then got a msg saying the adb is not a command, if I remove the adb and send the command with just pull it says pull is not a command.
If I exit su "#" it brings me to $ and if I send the command again it says that I don't have permission. Can you advise what I might be doing wrong? Oh, I got the mmcblk0p22 file to copy and convert into the boot.img file. I was able to see it using ES File explorer on my phone.
Do I need to go in fastboot usb, does unknown sources need to be checked?
Thanks again.

360fifa said:
I encountered an issue while trying to pull the boot.img file from /data/local/tmp/. The command used was adb pull /data/local/tmp/boot.img I then got a msg saying the adb is not a command, if I remove the adb and send the command with just pull it says pull is not a command.
If I exit su "#" it brings me to $ and if I send the command again it says that I don't have permission. Can you advise what I might be doing wrong? Oh, I got the mmcblk0p22 file to copy and convert into the boot.img file. I was able to see it using ES File explorer on my phone.
Do I need to go in fastboot usb, does unknown sources need to be checked?
Thanks again.
Click to expand...
Click to collapse
You need to exit one more time so you can see c prompt with your platform tools folder. Your still in shell therefore still in phone and not actually pulling to your pc. Only the pc uses Adb commands so you have to be at your platform tools folder. If you restart your phone temp empties too so if you can't see boot img anymore that's why.

Gizmoe said:
You need to exit one more time so you can see c prompt with your platform tools folder. Your still in shell therefore still in phone and not actually pulling to your pc. Only the pc uses Adb commands so you have to be at your platform tools folder. If you restart your phone temp empties too so if you can't see boot img anymore that's why.
Click to expand...
Click to collapse
Okay.. I am going to try that now, I swore I did that as well but lets see.

360fifa said:
Okay.. I am going to try that now, I swore I did that as well but lets see.
Click to expand...
Click to collapse
Here's what it said "failed to copy '/data/local/tmp/boot.img' to ' ./boot.img': Permission denied

Root access on adb shell but not for apps

Hello,
i am working on chinese android tablet called "MID-U705B". The device came half rooted i guess. I am getting an # in the adb shell, even without running "su", right from the start of adb shell. Nevertheless i am not able to run any root apps. When i am trying to call a root shell command from my app i am getting: [java.io.IOException] : write failed: EPIPE (Broken pipe).
There is a su file inside my /system/xbin folder and i also created a symbolic link to it in /system/bin.
Does someone know how to get full root access on this devices? Whats missing?
Thanks for your help and advice!
Best regards,
Hans

skatehans said:
Hello,
i am working on chinese android tablet called "MID-U705B". The device came half rooted i guess. I am getting an # in the adb shell, even without running "su", right from the start of adb shell. Nevertheless i am not able to run any root apps. When i am trying to call a root shell command from my app i am getting: [java.io.IOException] : write failed: EPIPE (Broken pipe).
There is a su file inside my /system/xbin folder and i also created a symbolic link to it in /system/bin.
Does someone know how to get full root access on this devices? Whats missing?
Thanks for your help and advice!
Best regards,
Hans
Click to expand...
Click to collapse
If you can get root on ADB then just install SuperSU app and its binaries and you are good to go.
Flashing the attached ZIP will install SuperSU app and everything it requires to function.
NOTE: You probably need a custom recovery because the zip isn't signed.

Thanks for your reply!
Unfortunately i dont have a custom recovery because its a no name device an there does not exist a custom recovery for this device. Is there any way to install this without a custom recovery? What happens when i try to flash it from a (chinese) stock-recovery?

skatehans said:
Thanks for your reply!
Unfortunately i dont have a custom recovery because its a no name device an there does not exist a custom recovery for this device. Is there any way to install this without a custom recovery? What happens when i try to flash it from a (chinese) stock-recovery?
Click to expand...
Click to collapse
You should be able to flash it via fastboot.

Thats the next Problem. I cant boot into fastboot mode. When i execute "adb reboot bootloader" or "adb reboot download" the device boots up like normal, so i guess fastboot is not available on this device.
Do you know any other way?

persist.img backup and restore

Hey guys! I was doing some forum surfing and I heard about this image called persist.img. I found out that it's specific to each device and you lose widevine if you flash a generic one. So I have 2 questions to ask you guys.
1. If I have a backup of my own persist.img, can I flash it and not lose widevine?
2. How do I actually back up the image?
Thanks on advance guys! ⊂((・▽・))⊃

1. not sure honestly, but I backup anyway to try if it does when time comes.
(Root is needed)
From computer:
adb shell dd if=/dev/block/bootdevice/by-name/persist of=/tmp/persist.img
adb pull /tmp/persist.img persist.img
Or from phone from terminal emulator;
su
dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img
Make a copy of this to somewhere else(drive/pc etc).
Not completely sure about restoring it, I think you can just flash it via fastboot.

Lossyx said:
1. not sure honestly, but I backup anyway to try if it does when time comes.
(Root is needed)
From computer:
adb shell dd if=/dev/block/bootdevice/by-name/persist of=/tmp/persist.img
adb pull /tmp/persist.img persist.img
Or from phone from terminal emulator;
su
dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img
Make a copy of this to somewhere else(drive/pc etc).
Not completely sure about restoring it, I think you can just flash it via fastboot.
Click to expand...
Click to collapse
That's great! Thanks for the help

Hey. How can we backup it without root?

Lossyx said:
1. not sure honestly, but I backup anyway to try if it does when time comes.
(Root is needed)
From computer:
adb shell dd if=/dev/block/bootdevice/by-name/persist of=/tmp/persist.img
adb pull /tmp/persist.img persist.img
Or from phone from terminal emulator;
su
dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img
Make a copy of this to somewhere else(drive/pc etc).
Not completely sure about restoring it, I think you can just flash it via fastboot.
Click to expand...
Click to collapse
where can i find the persist.img file in the device ? i search using google files app and it wasnt there.

Kagetane Hiruko said:
where can i find the persist.img file in the device ? i search using google files app and it wasnt there.
Click to expand...
Click to collapse
There is a app from play store called partitions backup it shows all partitions including persist and let's u make a copy for back up

hammered58 said:
There is a app from play store called partitions backup it shows all partitions including persist and let's u make a copy for back up
Click to expand...
Click to collapse
Needs root though.
You could do an msmtool readback i think it's called using msmtool. to backup without root. you do need windows for it though.

Ulefone Power Armor 13 Root

I want to root my phone and remove any bloatware. Can I do this with a stock A11 or custom Rom and still have the cameras and infrared range finder work properly? Does anyone know of any ROMs built specifically for the Power Armor 13?

Use the "temporary ROOT" method, will say put a matching SU-binary into phone's /data/local/tmp directory and then by means of ADB
make use of it:
Code:
adb devices
adb push <FULL-PATH-OF-SU-BINARY-ON-PC> /data/local/tmp
adb shell "chmod 0677 /data/local/tmp/su"
adb shell "/data/local/tmp/su -c '<COMMAND-WHAT-REQUIRES-SUPERUSER-RIGHTS-HERE>'"

jwoegerbauer said:
Use the "temporary ROOT" method, will say put a matching SU-binary into phone's /data/local/tmp directory and then by means of ADB
make use of it:
Code:
adb devices
adb push <FULL-PATH-OF-SU-BINARY-ON-PC> /data/local/tmp
adb shell "chmod 0677 /data/local/tmp/su"
adb shell "/data/local/tmp/su -c '<COMMAND-WHAT-REQUIRES-SUPERUSER-RIGHTS-HERE>'"
Click to expand...
Click to collapse
Thank you. I didn't know there was such a thing as a temp root. Do you have any advise on getting a ompatible rom for my hardware?

jwoegerbauer said:
Use the "temporary ROOT" method, will say put a matching SU-binary into phone's /data/local/tmp directory and then by means of ADB
make use of it:
Code:
adb devices
adb push <FULL-PATH-OF-SU-BINARY-ON-PC> /data/local/tmp
adb shell "chmod 0677 /data/local/tmp/su"
adb shell "/data/local/tmp/su -c '<COMMAND-WHAT-REQUIRES-SUPERUSER-RIGHTS-HERE>'"
Click to expand...
Click to collapse
Hi,
Can you please give me a hand with the method you mentioned?
1. the SU binary should be the supersu binary as zip file or the folder from the zip file?
2. could you please give me an example of how this string would look like if the file was for example in partition C?
adb push <FULL-PATH-OF-SU-BINARY-ON-PC> /data/local/tmp
I tried patching the boot image with Magisk and using ADB to install it but the phone is stuck on the start screen .
Thanks in advance!

I managed to root the phone permanently. However, I accidentally formatted the NVRAM partition. Could someone send me one?

Any updates?

FutureCrusader said:
Any updates?
Click to expand...
Click to collapse
I managed to do it quite easily. I will make a detailed tutorial this week.

denis9rafael said:
I managed to do it quite easily. I will make a detailed tutorial this week.
Click to expand...
Click to collapse
Thanks, appreciate it, mine is coming in this week so excellent timing lol

denis9rafael said:
I managed to root the phone permanently. However, I accidentally formatted the NVRAM partition. Could someone send me one?
Click to expand...
Click to collapse
Use the MauiMETA aka ModemMETA 10.2124.0
The software can restore your IMEIs but you need know How use that.

lopestom said:
Use the MauiMETA aka ModemMETA 10.2124.0
The software can restore your IMEIs but you need know How use that.
Click to expand...
Click to collapse
Because I messed up the first time I did it and had to format all with SP FlashTool, I had to restore the IMEI. I will post instructions on that too.
If you root with Magisk the boot image, it will put it in a reboot loop. I found on another forum a file that you have to flash first via adb.
It took me a week and reinstalling the software 5 times before I managed to find all I needed . Now it takes 10 minutes max to set it up.

FutureCrusader said:
Thanks, appreciate it, mine is coming in this week so excellent timing lol
Click to expand...
Click to collapse
I have created a complete guide on how to permanently root the phone using Magisk.
Please find it below:
How to root Ulefone Power Armor 13! Now with TRP recovery and Magisk included
Hello, Below is a guide on how to root Ulefone Power Armor 13 using Magisk, changing/restoring IMEI etc. Before you continue, I take no responsibility for any bricked devices. *Note: Before you begin, make sure you install the latest software...
forum.xda-developers.com