Related
UPDATED Aug 19, 2010: New Link, for Mirror to ROM. Original was pulled.
Get it here: http://bit.ly/cIXo91
This thread has been updated with great HOW TO VIDEO by XDA member darren rich who demystified a bunch of elements -- making this user-friendly for people with both UNBRANDED HTC Desire phones (GSM) -- and Branded phones -- which can be converted into unbranded phones first, by using the Goldcard process -- which he discusses.
Click to expand...
Click to collapse
This thread shows you how to update your HTC Desire GSM phone to Android version 2.2, Froyo, MANUALLY, using a WindowsPC computer, running the application "HTC Sync", connecting to your phone via USB cable. It's for usage if you have not been able to update Over The Air (OTA) -- and will provide you the exact same end result.
This is official HTC Software. This is for UNROOTED phones, phones that have only had official software that was originally installed, or OTA official updates. In other words:
teppic74 said:
You do not need to root your phone to run an RUU. These are official HTC updates that are designed for recovery or for people who cannot upgrade OTA.
Click to expand...
Click to collapse
RUU means "Rom Upgrade Utility" -- For unbranded phones, this process is straight forward. However if you have a branded phone, you have to add another step, and it's very important. It's also explained within...
teppic74 said:
Since this RUU is restricted to unbranded phones, you need a "goldcard" to bypass the check if you have a branded phone.
Click to expand...
Click to collapse
The thread combines (A) information from a previous thread posted by "football" [ROM] RUU_Bravo_Froyo_HTC_WWE_2.09.405.8 whichincluded the key download link to the primary Froyo file, which was posted by the good people at Shipped-Roms.com, with (B) much clarifying information from Darren and other posters from that thread.
Quick Overview
1. Download 3 files you'll need -- to a Windows machine.
a) "HTC Sync" software that runs on WindowsPCs only. It is the program that puts the initial software on your phone via USB cable.
Get it here: http://www.htc.com/europe/supportDownload.aspx?p_id=312&cat=3&dl_id=933
b) The main ROM -- a .exe file -- located here: (REVISED LINK as of Aug 19, 2010)
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.exe
See that same file in full context here: (Note: Unfortunately, this page, perhaps that whole site, was pulled, Account suspended)
c) The update to the main ROM -- a zip file -- which will be copied to your phone thru USB cable, not executed thru "HTC Sync". It is located here, from HTC's site:
http://liveimage.htc.com/OTA_Bravo_Froyo_HTC_WWE_2.09.405.8-1.21.405.2_release4dua3bcrut4wrv30.zip
2. Read Darren's Blog Post, it has good instructions.
3. Watch his Video. It's easy. You'll feel ready to go.
More Details - About That ROM:
NOTE: "HTC BRAVO" = "HTC DESIRE" . Bravo was the original codename used by HTC before the Desire was actually released. You can confirm that by looking at the "DEVICE DATABASE" that is linked to from the top of every page on XDA-developers, under the XDA logo. All versions of the HTC Bravo/ Desire.
.
(reserved for graphics 1)
reserved for more information
reserved for graphics 2
reserved for more information
reserved for graphics 3
reserved for further information and instructions
what about Hboot?
quanghaidv04 said:
what about Hboot?
Click to expand...
Click to collapse
I apologize; I do not know the answer to this. I posted this information prior to performing this installation on my own DESIRE. I will be doing that tomorrow (Sat Aug 14). The reason I posted it is that the thread it is based upon took 22 posts before it was explained WHAT it was, what it dis, how to do it. I thought it could be useful to re-package the information.
I also posted a disclaimer... But after I perform this update tomorrow, I will come back and reply here and tell you what I have found. I am assuming (but i do not know one way or another) that this will be information listed on the same screen that shows firmware version # ?
mirror for the ROM?, I get account suspended on the original link
gamgoum said:
mirror for the ROM?, I get account suspended on the original link
Click to expand...
Click to collapse
will get you one in next 30 minutes
Link dosent work.. But im looking forward to try this method, i really hope that its gonna work on my w7 64bit machine..
this one?
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.exe
?
gamgoum said:
mirror for the ROM?, I get account suspended on the original link
Click to expand...
Click to collapse
the only file I had was the one that was originally posted and that I was able to download last week from the site listed at the top of this thread: this file name:
RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00.32U_5.09.00.20_release_140022_signed.exe
and that one only. That is all I ever downloaded.
It should now be available here:
http://bit.ly/cIXo91
mirror:
RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00.32U_5.09.00.20_release_140022_signed.exe (165,1 MB)
http://www.multiupload.com/6DFC3EHB90
kmetek said:
mirror:
RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00.32U_5.09.00.20_release_140022_signed.exe (165,1 MB)
http://www.multiupload.com/6DFC3EHB90
Click to expand...
Click to collapse
Hi, could you explain, if you know, how the two differ, and who should use which? thank you
they don't differ it's your, just made a mirror in case your link dies?
Anybody having issues on the original stock sense unrooted 2.2 ROM? In every Sense 2.2. custom rom I tried I couldn't add more than one gmail account. I then tried unrooting and did the OTA update to 2.2. Same thing, still can't add more than 1 gmail acccount.
So I downgraded and rooted again and tried OpenDesire and could add more gmail accounts without problems. Then I tried a Sense 2.2 custom ROM and again, I coudn't add more than 1 gmail account.
So now I'm thinking to do the unroot with the RUU exe and see if it helps?
How HBOOT I will have after flashing to this rom ??
tomson93 said:
How HBOOT I will have after flashing to this rom ??
Click to expand...
Click to collapse
it is the ota update...so i say 0.92...but i don´t have try it
F*** so If i flash this rom i must do downgare HBOoT
tomson93 said:
F*** so If i flash this rom i must do downgare HBOoT
Click to expand...
Click to collapse
yes...it´s for people who want the original...or for cookers as base...but here are may rom´s based on this...also mine...look in my signuture...(alex-v 1.4)
I tried this, but I want to root my phone now. How do I root a 2.2 desire now? Do I have to go back to 2.1 stock and then root?
Welcome to the Huawei U8860 Honor / Honour / Glory - Index!
(please treat this thread as dev-thread, it is part of a dev-forum, not Q&A)
Please don't PM me for support, I will ignore those requests - they are just too many and I'm not getting paid for that, I'm not huawei support. Just ask your questions somewhere in the forum, but in my opinion this thread is really not the place for it, since this is a developer forum and not the Q&A section. That's why xda-developers adds restrictions to post here for new users - to prevent this to be a Q&A-Forum. Please Try to ask your questions in the appropriate Q&A-Section of the xda-developer Forum.
Different versions of the Huawei Honor
There are two feature differences that I am aware of:
Number of Touch-Points: 2 or 5; I have 2 touch-points and with B977 my ProjectMenu just printed "synaptic" as touchscreen version, with B919 it states "synaptics-TPK.6"
Position of Huawei Logo on the back: in the top-left corner (china / russia?) or in the middle like this: http://kaefert.is-a-geek.org/huawei_honor/IMG_7491_small.JPG
It seem's there are versions without a camera? at least user limzm states in his signature his U8860 doesn't have one.
Backup & Recovery
In my opinion the first and most important thing when playing around with different ROMs, is the ability to backup and restore the phones ROM & state.
For this you need a custom recovery (which you will also need to flash custom ROMs, so you might only skip this if you want to only flash stock ROMs)
If you're on an 2.3.6 ROM, then possibly for this to work, you first need to flash a different stock ROM. There have been reports that with 2.3.6 the method below may not work. Also some newer ROMs like B923 and above have locked boot loaders, the latest ICS ROM that you can use for this is B919
NEW: CWM 6.0.1.0 with touch-support: MOD EDIT: Link removed.
OLD: download recovery-u8860-en.img from here MOD EDIT: Link removed.
make sure there is no directory named "dload" on your micro-sd-card - if there is, rename or remove it.
Turn off Fast-Boot, and shutdown your phone. If you don't know how to turn off Fast-Boot, pull the battery (it can be found in different places in different ROMs)
Press and hold volume-up, volume-down and power-button at the same time.
You should now see your phones screen pink (="pink screen mode")
Now connect your phone with an USB cable to a computer
A few disks should be mounted, search for the one that has an "image" folder with an recovery.img and a boot.img inside it. rename the recovery.img to recovery-bak.img (or simular) and copy recovery-u8860-en.img there and rename it to recovery.img
WARNING: Don't use the file recovery_v8.img which is referenced in a few other guides. It crashes and leaves you with non bootable phone-states and/or with unfished backups which cannot be restored.
ROMs
Stock ROMs (& leaked stock ROMs)
Stock ROMs (or leaked stock ROMs) can be flashed like this:
Download and unpack onto your micro-SD Card like that: /mnt/sdcard/dload/UPDATE.APP (some ROMs also have UPDATE_CUST.APP, copy it to the same place. If you're update has a second dload_cust (or the like) folder, you need to flash it in a second round just as the first one, by renaming it to "dload")
Turn off Fast-Boot, and shutdown your phone. If you don't know how to turn off Fast-Boot, pull the battery (it can be found in different places in different ROMs)
Press and hold volume-up, volume-down and power-button at the same time.
If everything above was done correctly, you should be able to watch your phone upgrading now.
Alternative: Some ROMs have an option in the settings that lets you start the upgrade-procedure without step 2.) and 3.) from above. If you can find it, you can use that one.
You can find stock ROMs here:
International ROMs: http://www.huaweidevice.com/worldwide/technicaIndex.do?method=gotoProductSupport&productId=3834&tb=1
Chinese ROMs (can be changed to english): http://www.huaweidevice.com/cn/technicaIndex.do?method=gotoProductSupport&productId=3884&tb=1
Huawei Germany ROM: http://huaweidevices.de/honour?show=downloads
Huawei Russia ROM: http://huaweidevice.ru/updates.html
a comprehensive german list of stock ROMs can be found here:
MOD EDIT: Link removed.
(thanks to user det-happy for pointing it out to me)
The most important Stock-ROM in my eyes (as base for most custom ROMs there are) is B919, find it here:
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE2OTU=
or here: http://kaefert.is-a-geek.org/huawei_honor/B919_official.7z
Root and Google-Apps for Stock ROMs
NEW: Rooting method for stock ICS B919/B923/B924 (and perhaps others older ICS)
http://forum.xda-developers.com/showpost.php?p=28403132&postcount=799
For people running linux on their computers, I've created an adapted version of this root tool:
kaefert.is-a-geek.org/huawei_honor/HuaweiHonorRootTool_LinuxVersion.7z
OLD: Theres a nice guide explaining how to root and flash+enable google-apps here: (but don't take the recovery from there but from above. explanation also above) - only use this if the new method above doesn't work for you.
http://forum.xda-developers.com/showpost.php?p=22688341&postcount=53
Custom ROMs
To flash custom ROMs:
download their .zip file and put it somewhere on your sd-card
boot into your custom recovery: turn off phone completly, then Long press volume up + power button (for installation of custom recovery see top of this post)
factory reset / wipe everything (not always necessary, but to be on the save side. Some ROMs will not work in some cases if you don't wipe first, however the other way round is also possible, there are custom ROMs that will NOT work if you wipe, best look at the instructions from where you downloaded the custom ROM..)
flash update zip -> choose zip from sd card.
Cyanogenmod
dolmatov94 CM 10 Version 0.9.5 (2013-01-13)
MOD EDIT: Link removed.
newer versions, look at: http://dolmatov94.ru/
Da_Nya v2.4 [with sound mod] (2012-12-30)
MOD EDIT: Link removed.
Da_Nya v2.4.1 (2013-01-09)
MOD EDIT: Link removed.
CM 10.1 (Android 4.2) from 4PDA (posted here by user tuanshungf 8th February 2013)
MOD EDIT: Link removed.
Another list of Cyanogenmod ROMs can be found here (German):
MOD EDIT: Link removed.
ShenduOS
This ROM seems to be quite popular, but before deciding to use this, think about if you really wan't to support guys that treat the open-source community like **** by violating the GPL (by not publishing their kernel sources)
Stable Versions: MOD EDIT: Link removed.
Dev Versions: MOD EDIT: Link removed.
Mixture of ShenduOS and CM, with Android 4.2
MOD EDIT: Link removed.
MOD EDIT: Link removed.
MOD EDIT: Link removed.
FrozenPika (CM10.1, Android 4.2.2, based on ShenDu) GAPPS Integrated
Posted here by user "vTIMv" on 5th March 2013, 08:58 AM - found it on 4PDA.ru, uploaded 3rd March 2013
MOD EDIT: Link removed.
Android 4.x MIUI ROMs
WARNING: most MIUI-ROMs have SMS-confirmations turned on by default, which costs extra with many providers (like mine..) so check it before sending your first SMS and turn it off
Sadly, these ROMs have serious RAM-problems, multi-tasking was quite impossible the last time I tried one of those (any app I tried to put into background was imediatly terminated)
MOD EDIT: Link removed.
Android 2.3 MIUI ROM
Creator doc3000 posted it here, have not tried it out
http://forum.xda-developers.com/showthread.php?t=1596442
WARNING: user paul89rulez informed me that you can loose your IMEI by flashing this ROM, you can find a IMEI backup app here: MOD EDIT: Link removed.
Lists of other Custom ROMs
MOD EDIT: Link removed. --> chinese u8860 forum, contains ROMs, but also other stuff concerning the u8860
MOD EDIT: Link removed. --> chinese u8860 forum, contains ROMs, but also other stuff concerning the u8860
MOD EDIT: Link removed. --> an incomplete english index of the chinese list below
MOD EDIT: Link removed.
MOD EDIT: Link removed.
Custom Kernels
I found a custom kernel that adds the option to overclock up to 2GHz. I'm used it running at 1.8GHz and it didn't seem to be any more unstable than before (I'm using the MIUI ROM which is a little bit instable all by itself already)
MOD EDIT: Link removed since you need to register to download the kernel, I also attached it MOD EDIT: Link removed to make it easier for you.
I also managed to build (and deploy) the 3.0.8 kernel sources provided by huawei myself, see http://forum.xda-developers.com/showthread.php?p=23505650
With the help of the writer of rvoix I managed to adept our kernel in a way that rvoix works, but for the moment only mono so both parties mixed together in one channel (but recorded from the line, not only from the mic like most apps do). I attach the kernel that works with rvoix: View attachment boot_voc2.img.
Or for people wanting to build their kernels themselfs, here's the patch: http://code.google.com/p/rvoix/sour...pdragon/kernel/huawei_honor_u8860_rvoix.patch
UPDATE: Since our kernel sources don't work with B919 and later (non functional camera and wifi) I decided to go the other way round and modify the rvoix app to work with our kernel instead of adapting the kernel to work with the app. Here are the results: http://code.google.com/p/rvoix/downloads/detail?name=rvoix_mod_kaefert_v2.apk --> call recording that should work with all huawei honor 4.0.3 ROMs!
Various pointers
Adapting Chinese ROMs
Adding Google Apps (like the Market) --> Download zip from here http://goo-inside.me/gapps and flash it with recovery
Remove unwanted chinese system apps --> I do it with QtADB --> http://qtadb.wordpress.com/ But I guess you can also do it with some root app management apps
Change to languages that are not choosable in the standard language setting --> https://play.google.com/store/apps/details?id=jp.co.c_lis.ccl.morelocale
Reading chinese sites
People who don't use google chrome or the chromium project (yet) probably don't know, that it has a really nice built-in translating feature, thats very useful for finding your way arround all these chinese (or russian) websites, and much better then using translate.google.com (or other such services) manually with other browsers.
Miscellaneous
Silent Huawei camera (ICS)
I was annoyed one day by all the noises the huawei camera simulates. Therefore I investigated and found out how to make it silent.
If you're interested, see http://forum.xda-developers.com/showpost.php?p=29079425&postcount=1028
Enabling logcat output on huawei phones
If your on stock ROM its quite easy, just dial *#*#2846579#*#* and enable logging in the project menu
For custom ROMs, I got a link from paul, but I didn't try it:
MOD EDIT: Link removed.
another site about enabling logcat on huawei devices:
http://stackoverflow.com/questions/...device-dev-log-main-no-such-file-or-directory
UPDATE
Sorry guys, but there won't be any updates by me anymore. I've moved on to Sony Xperia Z. The notoriosly low memory problem finally did it. (And Ingress)
There's a newer list of custom ROMs here:
http://forum.xda-developers.com/showpost.php?p=45164331&postcount=3056
Hi guys.
I've just cleaned this thread and would like to remind everyone about some points, so that they're not repeated in the future, and explain all the missing links you may notice.
Warez is strictly forbidden on XDA. Please do not link to websites that provide it, or to ROMs that contain pirated apps.
Kernels are licensed under the GPL. This means that the kernel's source should be provided. If it is not, it's illegal and will be treated as warez as far as XDA is concerned. In simpler terms: if you're posting a link to a ROM that contains a kernel, or a kernel, make sure the kernel's source is available and link to it as well.
Recoveries that aren't based on stock and that use a zImage (which is covered by the GPL) must also be provided along with the source.
Links to competing or commercial websites are not allowed. Links to websites that require registration to access downloads are also not allowed (there are exceptions, please see rule #11 for more info.)
Credits must be given, and you must have permission to share the work. Assuming that you do: if this goes against the point above, you may mention the member/website without linking directly to his work. Point #2 still applies - a link to the kernel's source must be provided if necessary.
I realize this may have caused links to your favorite custom ROMs to be removed, and I apologize about that. Many of you clearly put a lot of effort into building, maintaining and helping with this index. However, all posts must respect the rules first and foremost.
Please PM me if you have any questions or if you need further clarification.
Thanks for understanding.
Hey thanks so much for helping with this. I followed your guides and managed to get my Honor rooted and on an ICS version. Thanks so much.
limestar said:
Hey thanks so much for helping with this. I followed your guides and managed to get my Honor rooted and on an ICS version. Thanks so much.
Click to expand...
Click to collapse
You're welcome. However, for the future, if theres nothing you want to say but to give thanks to someone for a post above yours, don't answer with a post of your own, but just use the "thanks" button. Thats what it was made for.
However if there are some questions or some obscurities in my post, feel free to ask.
Sir, does the miui rom is stable for daily use,
wahyuwidi said:
Sir, does the miui rom is stable for daily use,
Click to expand...
Click to collapse
Well, I've been using it for 2 days now. I wouldn't call it stable, it has some rough edges, sometimes some system app crashes (like in the beginning I had a problem with the SMS-app), and I've had 2 complete system crashes (forced reboot) while running oruxmaps for navigation & gps-logging with my byclicle.
Check with you, if i installed the custom recovery, and root, can i revert back to stock by flashing via the settings menu or the vol/power button combination and stock rom in load directory?
cymagnus said:
Check with you, if i installed the custom recovery, and root, can i revert back to stock by flashing via the settings menu or the vol/power button combination and stock rom in load directory?
Click to expand...
Click to collapse
Well the settings menue doesn't contain the huawei upgrade option in every ROM (for example not in the MUIU ROM), but the volumn up+down while booting will probably work, I haven't tried though. The upgrade directory however has to be call "dload", not "load".
To revert back to a previous ROM I find it much better to use the nandroid backup and recover options that every recovery image I saw yet contains. However be careful, the recovery-v8.img posted on some other places is instable and crashes before the backup is finished. you won't be able to recover such an incomplete backup. Always check if you have some backup complete message, it should NOT reboot automatically after making a backup.
kaefert said:
Well, I've been using it for 2 days now. I wouldn't call it stable, it has some rough edges, sometimes some system app crashes (like in the beginning I had a problem with the SMS-app), and I've had 2 complete system crashes (forced reboot) while running oruxmaps for navigation & gps-logging with my byclicle.
Click to expand...
Click to collapse
Sir, is it ICS version that you are using? thanks.
daleylay said:
Sir, is it ICS version that you are using? thanks.
Click to expand...
Click to collapse
As stated in my first post, I'm currently using the unofficial MIUI android 4.0.3 version from here:
MOD EDIT: Link removed.
I have one or two unexpected reboots every day.
kaefert said:
As stated in my first post, I'm currently using the unofficial MIUI android 4.0.3 version from here:
MOD EDIT: Link removed.
I have one or two unexpected reboots every day.
Click to expand...
Click to collapse
What is in MIUI rom better than the official rom that you like?
cbr900 said:
What is in MIUI rom better than the official rom that you like?
Click to expand...
Click to collapse
Well the MIUI ROM has much more configuration options, for example you have a statusbar settings page where you can choose between default battery icon, percentage number or the top pixel row in green. Or also the MIUI theme chooser is really nice.
Another useful thing is the permission manager thats included that (if you config it that way) asks you whenever an app tries to use a permission that its defined to require. for example if you have an app that has the permission to send sms then the permission manager will ask you the first time that the app really sends an sms if you want to allow or deny it, and also if you want to save your choice or if it should ask next time again.
Hi, Sorry for my bad english, i have a awesome huawei honor, and i do all things that u describe in your post and run perfect but, i'm from mexico and y dont have 3G conection just Edge, do you know a way to resolve that? Thanks
Rafasdfgh said:
Hi, Sorry for my bad english, i have a awesome huawei honor, and i do all things that u describe in your post and run perfect but, i'm from mexico and y dont have 3G conection just Edge, do you know a way to resolve that? Thanks
Click to expand...
Click to collapse
Hmm. Well the only ideas I have:
1.) Theres a 2G+3G / 2G only switch, in the MIUI ROM I linked in my first post you can reach it like this:
Home Screen --> Settings --> More... (4th point under the heading Wireless & Networks) --> Mobile Networks --> Only 2G-Networks
If that switch is on, than obviously your phone won't connect to a 3G network
2.) Your not in range of a 3G network?
Apparently there is bootloop issue for the newly released MIUI ROM 2.3.23 over at MOD EDIT: Link removed.
My experience is that I got stuck at the splashscreen as well.
I have download another at MIUI main site : MOD EDIT: Link removed.
and it works OK. Some portions of the UI are with Chinese texts and a few Chinese apps but overall still OK.
cymagnus said:
Apparently there is bootloop issue for the newly released MIUI ROM 2.3.23 over at MOD EDIT: Link removed.
My experience is that I got stuck at the splashscreen as well.
I have download another at MIUI main site : MOD EDIT: Link removed.
and it works OK. Some portions of the UI are with Chinese texts and a few Chinese apps but overall still OK.
Click to expand...
Click to collapse
yep. I also flashed the version from there MOD EDIT: Link removed and am currently running it. Will update the first post again as soon as theres a working english version for the huawei over there: MOD EDIT: Link removed.
Hey could you recommend some other rom that will speed up my phone? Im currently overclocked to 1.8 Ghz using a kernel from the links you gave.
Sent from my U8860 using xda premium
EnDSK said:
Hey could you recommend some other rom that will speed up my phone? Im currently overclocked to 1.8 Ghz using a kernel from the links you gave.
Sent from my U8860 using xda premium
Click to expand...
Click to collapse
The ROMs that I know of and that I've tried you find in the first post. I found the loader (=desktop) of the non-MIUI ROMs to be faster and snappier. (However, the MIUI is more feature-rich)
Okay thanks alot I think I'm gonna give MIUI a try. Downloaded the latest version from the MIUI website. Have you tried any CM Release?
Sent from my U8860 using xda premium
EnDSK said:
Okay thanks alot I think I'm gonna give MIUI a try. Downloaded the latest version from the MIUI website. Have you tried any CM Release?
Sent from my U8860 using xda premium
Click to expand...
Click to collapse
As far as I know there is no CM (cyanogenmod) ROM for the Huawei U8860
Do you think there is chances that this ubuntu for tablet will be available for TF101? or is it possible to make it for ourselves?
It is available, look in the dev section.
Lethe6 said:
It is available, look in the dev section.
Click to expand...
Click to collapse
ahh, actually i mean Ubuntu For Tablet, not the desktop version. sorry for the mislead.
take a look here,
http://www.youtube.com/watch?v=h384z7Ph0gU
maybe
A place to start perhaps! Any takers?
https://wiki.ubuntu.com/Touch/Install
Lets do this.
I started looking at it this morning and they are releasing a porting guide tomorrow morning. I've already unpacked the images for the manta (nexus 10) and began poking around. I think we can successfully do this....since we've already got an armhf version started we could port just the interface and modules over on the base we already have.
I'll make a thread in the dev section as soon as I get more information and possibly a compile job started.
--
jholtom
I would be totally interested in this. And available for testing anytime!!!!
Sent from my Galaxy Nexus using xda premium
Cant wait for this!! will have to get studying and try help out the cause lol, btw imagine it combined with this https://wiki.linaro.org/LEG/Engineering/Kernel/GRUB
Porting guides up here: https://wiki.ubuntu.com/Touch/Porting
It would be very nice to see a port to the TF101 of this project. If the standard Ubuntu ARM release has been ported I hope it will be feasible for the Touch release as well.
Trying to port.....
Hello all! I have the tf101, and have tried the porting guide, but is says that it is not supported.... any ideas for workarounds?
thosehippos said:
Hello all! I have the tf101, and have tried the porting guide, but is says that it is not supported.... any ideas for workarounds?
Click to expand...
Click to collapse
from what im reading if the device has a cyanogenmod 10.1 rom officially or unofficially then we should be able to port it im working on it myself as well, im not sure we have 10.1 tho i know we have CM10 just not sure about 10.1 but if it can be done it will be. we already have CM10 and we have 4.2.1 jellybean so i would think CM 10.1 is possible and therego ubuntu touch....id be willing to bet that if you give it a week or 2 the dev section will be graced with a port.
EDIT: update there is a ew CM10.1 rom up now and that will open the way for this to be ported...just saw it in dev section...maybe a few days rather than weeks the porting guide is rather straightforward and theres not much to it...its really a glorified theme just running in a container on top of android even using the android video, audio, and other hardware HALS and libs(i do believe) i am only a beginner developer so dont quote me completely...
neofreek01 said:
from what im reading if the device has a cyanogenmod 10.1 rom officially or unofficially then we should be able to port it im working on it myself as well, im not sure we have 10.1 tho i know we have CM10 just not sure about 10.1 but if it can be done it will be. we already have CM10 and we have 4.2.1 jellybean so i would think CM 10.1 is possible and therego ubuntu touch....id be willing to bet that if you give it a week or 2 the dev section will be graced with a port.
EDIT: update there is a ew CM10.1 rom up now and that will open the way for this to be ported...just saw it in dev section...maybe a few days rather than weeks the porting guide is rather straightforward and theres not much to it...its really a glorified theme just running in a container on top of android even using the android video, audio, and other hardware HALS and libs(i do believe) i am only a beginner developer so dont quote me completely...
Click to expand...
Click to collapse
Won't it have to be an official 10.1 CyanogenMod build? Last I check (5 minutes ago) they only had CM10 on the TF101? It could technically be done with an unofficial rom but it would make it a lot harder than you suggest. Please see the CyanogenMod Device Info (sorry I am a new user so I can't make the link click-able wiki (dot) cyanogenmod (dot) org/w/Tf101_Info ).
prepreprealpha
Just tryed To install that preprealpha ubuntu touch which ends in a black screen. All nandroid backups Seem To be gone. Sdcard is no longer available in cwm.
Any ideas?
Thx
just for the curious:
i used lumpy kernel and no-names cm 10.1 device tree, had to do a little patching and this is the result:
www .youtube .com/watch?v=Dp7Tt7W7-3s
I am not allowed to post in the dev forum, so i put it here Wifi is not working, and i think its related to /proc, when i have fixed it, i will publish the changes to github..
p.s. no links allowed either! remove the blank spaces
onkelbebu said:
just for the curious:
i used lumpy kernel and no-names cm 10.1 device tree, had to do a little patching and this is the result:
www .youtube .com/watch?v=Dp7Tt7W7-3s
I am not allowed to post in the dev forum, so i put it here Wifi is not working, and i think its related to /proc, when i have fixed it, i will publish the changes to github..
p.s. no links allowed either! remove the blank spaces
Click to expand...
Click to collapse
Nice! We have it up to a similar stage over here
http://forum.xda-developers.com/showthread.php?t=2168473
Looks about the same as yours but your fonts are legible, jump over maybe you can help out
EDIT - Damn, I forget how many posts you need, maybe 10 to post in Dev section
mattack_at2 said:
Just tryed To install that preprealpha ubuntu touch which ends in a black screen. All nandroid backups Seem To be gone. Sdcard is no longer available in cwm.
Any ideas?
Thx
Click to expand...
Click to collapse
Maybe somone else gets in this situation. i guess my mistake has been wiping system completly with cwm-touch
anyway, anything has been in internal Storage seems to be lost.
Now i flashed RogueXM Touch v1.5.0-R1 with easyflasher, in after booting into it i were able to access Android images placed on my MicroSd.
At least CM10.1 is booting now.
until i get my 10 posts ill post here
i sort of got ap scanning working, i messaged jholtom already how i did it. it involved some manual manipulating, next i try to sort it out
and again...
i have modified rc script to include my "fixes", resulting in working wifi. i will push my changes so it can be used anywhere. to setup the network connection i used phablet-network-setup included in built tools to copy the wifi settings from my laptop. keyboard still isnt useable.
here is the result:
youtu .be / KHpHp21aylU
the browser feels quite fast
and this is the install log from ssh server:
pastebin .ca / 2327138
again i am not allowed to post urls :/
onkelbebu said:
and again...
i have modified rc script to include my "fixes", resulting in working wifi. i will push my changes so it can be used anywhere. to setup the network connection i used phablet-network-setup included in built tools to copy the wifi settings from my laptop. keyboard still isnt useable.
here is the result:
youtu .be / KHpHp21aylU
the browser feels quite fast
and this is the install log from ssh server:
pastebin .ca / 2327138
again i am not allowed to post urls :/
Click to expand...
Click to collapse
wow great work! I have posted on your behalf in the dev thread, build up some posts and get yourself over
Again nice work
I try to work close together with jholtom, he will incorporate the needed changes
Hi guys for all you people out there new to the Atrix 2 and its awsm development section here is a brief glimpse on the
Great work and Development that has taken place over the years.....
Firstly we need to thank all the senior DEV's who have put in a lot of hard work to bring our A2 from
2.3.5 all the way 4.4.4 ( Doesn't Seem it will ever Stop ) Kudos to their effort...........
Stock Roms..... ( Thanks to the SBF team As well Teamfirmware )
THIS HAS ALL THE REQUIRED FILES TO BRING YOUR A2 TO STOCK aka FXZ
ICS ROM FOR AT&T
Stock / Leaked ROM's .......
1. THESE ARE THE VARIOUS JELLY BEAN LEAKS 1, 2 & 3
2. Atrix2_Jellybean_4.2.1_Asia_Version
3. Official Jellybean (4.1) for Retail CN Atrix2
NOW THE NEXT STEP IS UNDERSTANDING HOW TO USE THESE STOCK ROM'S
We have an amazing thread for that covering all aspects of what is FXZ & HOW TO USE IT etc.....
(Thnx to @alteredlikeness)
Read the above carefully to properly understand which files you need to flash for your specific region A2.
MOVING ON.........
CUSTOM ROM'S
KIT-KAT 4.0 - 4.4.3....... ( WE HAVE 4.4.3 NOW !!!!!! )
1. [ROM][4.4.4][Unofficial] CyanogenMod CM-11.0
2. [ROM][Port][4.4.3][A2EPT][Unofficial]~{LiquidSmooth v3.1}~Updated 06/19/2014
3. [ROM][PORT][4.4.2] Gummy 2.1 M1[Unofficial][A2EPT] *Updated 19/02/14*
4. [ROM]{Port}[4.4.2][Unofficial][A2EPT]Nexus Experience Rom RC1.9(Updated)02/27/2014[/B]
5. [ROM][4.4.3][AOSP][Unofficial] SlimKat - Build 5.9
6. [ROM][4.4.3] ParanoidAndroid 4.4 RC1
7. [ROM] [4.4.2] ]MagicMod For Atrix2 [Weekly [email protected]][PIE Added]
8. [ROM][4.4.3][OFFICIAL & NIGHTLIES][EDISON] MoKee OpenSource Project
9. [ROM][4.4.2] CM-11.0 | JBX | OC-1.5 GHz | HDMI | [SOURCE BUILT]
10. [ROM][4.4.3] SOKP-RC (SONIC TEAM) | JBX | OC-1.5 GHz | HDMI | [SOURCE BUILT] [A2EPT]
11. [ROM][4.4.3] AxxionKat - The Revolution Has Arrived v1.2.0 [Official][A2EPT]
12. [ROM][4.4.3][Unofficial] CarbonROM Source Build
JELLY BEAN 4.3 ......
1. [ROM][4.3][AOSP] PARANOIDANDROID 3.99-RC2
2. [ROM][4.3.1][AOSP][Unofficial Android Open Kang Project] - http://forum.xda-developers.com/showthread.php?t=2310395
3. [ROM][4.3][UNOFFICIAL]CarbonRom - http://forum.xda-developers.com/showthread.php?t=2406583
4. [ROM][4.3][OFFICIAL & NIGHTLIES]MoKee OpenSource Project - http://forum.xda-developers.com/showthread.php?t=2305303
5. [ROM][4.4.2][AOSP][Unofficial] Slim Bean - http://www.androidfilehost.com/?w=files&flid=8191
6. [ROM][4.3][OFFICIAL]PAC-man - http://forum.xda-developers.com/showthread.php?t=2409667
7. [ROM][PORT][4.3]AVATAR ROM 4.0[UNOFFICIAL] - http://forum.xda-developers.com/showthread.php?t=2298897
NOTE : The following threads above have the previous versions of their ROM's based on the other versions of Jelly Bean ( 4.1.2 - 4.2.2 )
1. [ROM][PORT][4.2.2]PACman ROM v5.0[HALO!!][UNOFFICIAL][KEXEC] - http://forum.xda-developers.com/showthread.php?t=2302027
2. [ROM] [4.1.2] MIUI v5 for Retail Asia & ATT - http://forum.xda-developers.com/showthread.php?t=2259993
3. [WIP][ROM][kexec/ICS][JB][AT&T]Official China 4.1.2 leak - http://forum.xda-developers.com/showthread.php?t=2323111
4. [ROM][PORT][4.2.2]DIRTY UNICORN v3.6[UNOFFICIAL] - http://forum.xda-developers.com/showthread.php?t=2321923
5. [ROM][4.2.2][UNOFFICIAL]CarbonRom - http://forum.xda-developers.com/showthread.php?t=2381959
6. [4.2.2]PUB PROJECT UNICORN BUTTER v1.0[UNOFFICIAL AOKP] - http://forum.xda-developers.com/showthread.php?t=2301591
7. [ROM][PORT][4.2.2]Stock AOKP[UNOFFICIAL][KEXEC] - http://forum.xda-developers.com/showthread.php?t=2325994
8. [ROM][PORT][4.2.2]LIQUIDSMOOTH v2.8[UNOFFICIAL] - http://forum.xda-developers.com/showthread.php?t=2296293
9. [ROM][4.2.2] JellyBeer v4.33 - http://forum.xda-developers.com/showthread.php?t=2377076
10. [ROM] 4.2.2 CM 10.1 - http://forum.xda-developers.com/showthread.php?t=2121029
11.Angeeks_MotoME865_4.12_6902_UISS_CN_Q2 - http://forum.xda-developers.com/showthread.php?t=2159040
Now for all you people who want custom ICS ROM's on your A2
1. NUMA 3.0 - http://forum.xda-developers.com/showthread.php?t=1960679
2. ICSupercharged - http://forum.xda-developers.com/showthread.php?t=1648421
3. MIUI V4 - http://forum.xda-developers.com/showthread.php?t=1847360
4. [ROM] 4.0.4 MIUIv4 2.10.12 Unofficial MB865 - http://forum.xda-developers.com/showthread.php?t=1847360
5. [ROM] (ICS) SwiftyTrix v1.3 - http://forum.xda-developers.com/showthread.php?t=1879475
6. [ROM] ME865 ONLY | Official MIUI 2.10.12 - http://forum.xda-developers.com/showthread.php?t=1914096
Sorry if i forgot to mention anyone....
[NOTE : FLASHING CUSTOM ROM'S IS AT YOUR RISK AND THE OWNER OF THIS THREAD AND THE OP'S OF THE ABOVE THREADS
ARE NOT RESPONSIBLE]
RECOVERIES :
1. BOOT MENU MANAGER ( https://play.google.com/store/apps/details?id=com.projectlense.bootmenu.manager&hl=en[/ ) aka BMM
2. CWM TOUCH ( http://forum.xda-developers.com/showthread.php?t=1686598&highlight=cwm)
[ As most of the new ROM's are all BMM compatible it is advised to use it instead of CWM ]
A detailed guide on BMM and how to use it is given here for MULTI Booting ROM's ( http://forum.xda-developers.com/showthread.php?t=2115715 )
CUSTOM KERNEL's :
1. [KERNEL][3.0.31][HDMI][FULL HD][GUIDE 1.8]JBX-Kernel Hybrid [1,5ghz]
( http://forum.xda-developers.com/showthread.php?t=2320784 )
[ @dtrail1 Rulzzz ]
This kernel is in a .zip format and can be directly flashed via BMM
These give you direct access to your CPU and Over clocking features
[ Note the 0.8xx kernels are for 4.2.2 and below and 1.x for 4.3 for Kit-Kat 2.0 & 3.0 onwards]
I will keep adding all the remaining ROM's to this thread and plzz feel free to post any new ones so that i can add them to the list....
IT WAS HIGH TIME SOMEONE MADE AN INDEX OF THE AVAILABLE ROM'S FOR OUR BELOVED A2
ENJOY !!!!!
DON'T FORGET TO CLICK ON THE THANKS BUTTON IF THIS HELPED YOU XD
Hi
This thread is for all you people new to the atrix 2
it is a simple way to view all that we have in store for customizing the a2.......:d
The problem with this kind of thread is that it is rare that the people that need it spelled out for them like this won't bother taking the time to read them. Good effort though.
u have missed something in OP .... u forgot to put CM10 on list ....
as i know..., we will got the official one soon... :laugh:
btw ..., nice thread for noob ... :good:
I put up this thread to help all those noobs who keep posting what should i do which ROM should i download my Ctd.bin file error when i flash RSD
this is to simplify it for all of them
And i noticed our A2 doesnt have a list of ROM's and an index page so i think it will be useful to everyone
as it covers a wide range of problems
Although its a WIP ill keep adding more tips and other ROM's it will be easier to access all the links in one page rather than searching
all the forums for the correct one......
Just a thread to Help everyone and show our appreciation to the DEV's who made it all happen....
1BadWolf said:
The problem with this kind of thread is that it is rare that the people that need it spelled out for them like this won't bother taking the time to read them. Good effort though.
Click to expand...
Click to collapse
All the ppl on the apex noob q&a thread keep asking the same questions and dont bother even searching the forums
This thread will answer most of their problems and decrease the amount of noob posts regarding the same problem over and over again
Just post this thread whenever they ask something that way they can see all the issues in one place and get all their issues solved.
darth_nihar said:
All the ppl on the apex noob q&a thread keep asking the same questions and dont bother even searching the forums
This thread will answer most of their problems and decrease the amount of noob posts regarding the same problem over and over again
Just post this thread whenever they ask something that way they can see all the issues in one place and get all their issues solved.
Click to expand...
Click to collapse
Or simply tell them to read over the development section. This forum has always had a problem with repetitive questions. Encouraging others to read and educate themselves can help to resolve some (but not all) of that. I'm not saying that you were wrong in posting this thread, just don't be surprised or discouraged when it inevitably gets ignored by those who would benefit the most from it.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
1BadWolf said:
Or simply tell them to read over the development section. This forum has always had a problem with repetitive questions. Encouraging others to read and educate themselves can help to resolve some (but not all) of that. I'm not saying that you were wrong in posting this thread, just don't be surprised or discouraged when it inevitably gets ignored by those who would benefit the most from it.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
What u said is true but no harm in trying LOL.....
1BadWolf said:
Or simply tell them to read over the development section. This forum has always had a problem with repetitive questions. Encouraging others to read and educate themselves can help to resolve some (but not all) of that. I'm not saying that you were wrong in posting this thread, just don't be surprised or discouraged when it inevitably gets ignored by those who would benefit the most from it.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
Dude i still can't get the audio to work with that renaming Droidhd.ogg ne luck on another workaround
Btw i boosted the sound and made it louder ill send you the file tonight...
darth_nihar said:
Dude i still can't get the audio to work with that renaming Droidhd.ogg ne luck on another workaround
Btw i boosted the sound and made it louder ill send you the file tonight...
Click to expand...
Click to collapse
Make sure that it is not capitalized. If you want to see the exact name that the system is looking for then open the zip, find the file named desc.txt and open it in a text editor/viewer. You'll see a line that looks like:
s droidhd.ogg
The "s" means that the animation will use a sound and what follows is what the name of the sound is. Then just make sure that the bootanimation.zip and the audio file are both in /system/media with the correct permissions, etc.
As far as getting it running on jb. I haven't found anything that seems to work. From what I've read, it seems as though it might have to be supported by the ROM and/or kernel. But I'm not positive of that.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
1BadWolf said:
Make sure that it is not capitalized. If you want to see the exact name that the system is looking for then open the zip, find the file named desc.txt and open it in a text editor/viewer. You'll see a line that looks like:
s droidhd.ogg
The "s" means that the animation will use a sound and what follows is what the name of the sound is. Then just make sure that the bootanimation.zip and the audio file are both in /system/media with the correct permissions, etc.
As far as getting it running on jb. I haven't found anything that seems to work. From what I've read, it seems as though it might have to be supported by the ROM and/or kernel. But I'm not positive of that.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
i did tht let me see if its ROM specific :laugh:
1BadWolf said:
Make sure that it is not capitalized. If you want to see the exact name that the system is looking for then open the zip, find the file named desc.txt and open it in a text editor/viewer. You'll see a line that looks like:
s droidhd.ogg
The "s" means that the animation will use a sound and what follows is what the name of the sound is. Then just make sure that the bootanimation.zip and the audio file are both in /system/media with the correct permissions, etc.
As far as getting it running on jb. I haven't found anything that seems to work. From what I've read, it seems as though it might have to be supported by the ROM and/or kernel. But I'm not positive of that.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
Still cant get it to work>>>
bump
bump Read this before going to the noob/apex thread.......most of ur questions will be answered here:silly:
Thank you so much. Saved me from that dreaded AT&T ICS.
Sent from my MB865 using XDA Premium 4 mobile app
CreativeSin said:
Thank you so much. Saved me from that dreaded AT&T ICS.
Sent from my MB865 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Np always happy to help
(AS LONG AS U CLICK ON THE THANKS BUTTON )
Az-one786 said:
u have missed something in OP .... u forgot to put CM10 on list ....
as i know..., we will got the official one soon... :laugh:
btw ..., nice thread for noob ... :good:
Click to expand...
Click to collapse
We wont get CM official Hashcode said he will not work on moto OMAP devices so we are not on the list............
But we will still get ports and PA is kinda Official so no problem there
Can't wait 4 KIT-KAT to come for our device i hope @Hashcode does his magic and brings it life for our A2
Just been a silent observer and tester for atrix2 roms here...and finally i've found the best match...
PA 3.99 stable build + this kernel JBX-Kernel-1.4-Hybrid-4.3_2013-11-07.zip
It gives me awesome battery life and performance...
Trickster mod settings-
Interactivex with Min (300) and Max (1000)
Please spread the word...cheers.
xmotouserx said:
Just been a silent observer and tester for atrix2 roms here...and finally i've found the best match...
PA 3.99 stable build + this kernel JBX-Kernel-1.4-Hybrid-4.3_2013-11-07.zip
It gives me awesome battery life and performance...
Trickster mod settings-
Interactivex with Min (300) and Max (1000)
Please spread the word...cheers.
Click to expand...
Click to collapse
There is nothing like the perfect ROM its the dev's who put in the hardwork to make it possible
So please don't say this is the perfect ROM etc...
Each ROM is unique in its own way and everyone has their own perfect ROM that suits them........
So keep flashing all the amazing ROM's we have and choose what best suits your needs......:silly:
This is probably a dumb question, and I'm sure there's a thread about it that I couldn't find, but to install a custom kernel would you just go into BMM recovery and install zip like with the ROM, GApps, etc.? And if so, any extra steps to take to install it without having to like reflash the ROM and losing all my ****?
Sent from my MB865 using XDA Premium 4 mobile app
View attachment 5737423
We are very excited to announce the beta of Paranoid Android Topaz, based on Android 13.
On the first launch, you’ll notice a clean setup with beautiful wallpapers from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app from the PlayStore.
Our builds are based on the Code Linaro Organization Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Starting from Beta 3, we are unifying the zip for OnePlus 9 and 9 Pro to avoid any confusion and easier development!
Notice
We kindly ask all of you that are in a position to donate anything, to help and support us so we can provide better and faster build releases, as well as increase the download speed of our servers, all looking for your enjoyment.
You can donate on the link below:
Donate
Device-specific issues
You tell me!
Requirements
Make sure you've latest platform tools for Android.
Please be on the latest version of OOS 11 before you install AOSPA. (Flashing firmware through fastboot will also work)
Download Latest
You can also get older beta builds from our website Paranoid Android website
Note: Custom kernels are NOT supported the kernel says it supports PA and GMS is included!
Changelogs for Beta 4
Fixed Alert slider calibration which caused issues with middle and last position
Fixed excessive 5G idle drains.
Fixed AOD not updating.
Updated vibration patterns for alert slider feedback
Set AOD screen brightness same as stock.
Changelogs for Beta 3
Unified builds for OnePlus 9 and 9 Pro.
Switched back to OOS 11 firmware.
Switched to arter97 kernel.
Implement sensor's HAL for Screen Off UDFPS, DT2W and ST2W.
AOD improvements.
Fingerprint improvements.
Update vibrator HAL and drivers from OOS 13.
Disable AOSP's Prevent ringing gesture.
Updated CarrierConfigs.
Update to LA.UM.9.14.r1-21000-LAHAINA.QSSI13.0.
Fix OGG audio playback.
CLEAN FLASH REQUIRED ONLY IF COMING FROM BETA 2.
Beta 3 users can flash beta 4 without wiping their data.
Guide to Unlock/Enable 5G
Keep an eye on our Twitter account, @paranoidaospa, as we will be posting about new features getting included in the release builds, as well as links to betas for those devices that will get them. For more detailed information please have a look at the second post of this thread of each build changelog on the website.
Paranoid Android Topaz flashing
Instructions
Unlock your bootloader, and in bootloader mode follow the next command
fastboot update aospa-topaz-beta-*-image.zip
After the reboot, factory reset the device (only required for the first time you flash Paranoid Android)
Sources
Kernel Source
AOSPA Source
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Download Channel (Telegram)
Paranoid Android Community (Telegram)
Paranoid Android OnePlus 9 Family community (Telegram)
Cheers and #StayParanoid!
Wooh Rom installation was but different can I flash in oos 11 firmware
Any ss?
Vishalcj17 said:
View attachment 5737425
We are very excited to announce the beta of Paranoid Android Topaz, based on Android 13.
On the first launch, you’ll notice a clean setup with beautiful wallpapers from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app from the PlayStore.
Our builds are based on the Code Linaro Organization Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Notice
We kindly ask all of you that are in a position to donate anything, to help and support us so we can provide better and faster build releases, as well as increase the download speed of our servers, all looking for your enjoyment.
You can donate on the link below:
Donate
Device-specific issues
You tell me!
Requirements
Make sure you've latest platform tools for Android.
Please be on the latest version of OOS 12 before you install AOSPA. (Flashing firmware through fastboot will also work
Download
You can always get our Beta builds from our website Paranoid Android website
Note: Custom kernels are NOT supported the kernel says it supports PA and GMS is included!
Changelogs
Keep an eye on our Twitter account, @paranoidaospa, as we will be posting about new features getting included in the release builds, as well as links to betas for those devices that will get them. For more detailed information please have a look at the second post of this thread of each build changelog on the website.
Paranoid Android Topaz released
Instructions
Unlock your bootloader, and in bootloader mode follow the next command
fastboot update aospa-topaz-beta-*-image.zip
After the reboot, factory reset the device (only required for the first time you flash Paranoid Android)
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Download Channel (Telegram)
Paranoid Android Community (Telegram)
Paranoid Android OnePlus 9 Family community (Telegram)
Cheers and #StayParanoid!
Click to expand...
Click to collapse
Hell yeah can't wait to try it
Phoenix47 said:
Already on topaz beta 1 but still getting this update notification.
View attachment 5737741
Click to expand...
Click to collapse
How's performance? Compared to Stag, PEX....etc..
Phoenix47 said:
Performance is good. Geekbench score is also high.
Click to expand...
Click to collapse
does it have auto brightness and sync toggles in quick settings?
gapps included?
Phoenix47 said:
Autobrightness toggle is there and gapps included.
Click to expand...
Click to collapse
thanks for reply,
there are 2 files on GDrive which one to download?
and how to flash ? i see a different method in OP than update from recovery
thanks again
ahmd gom3aa said:
thanks for reply,
there are 2 files on GDrive which one to download?
and how to flash ? i see a different method in OP than update from recovery
thanks again
Click to expand...
Click to collapse
Rename zip to pa.zip. reboot into bootloader "fastboot update pa.zip" let it install, when it returns to bl, factory reset . Boot into aospa. And if there is 2 files lemonade is for reg op9. Lemonadep would of course be the pro model.
Current OOs has to be on both slots prior to installation.
when i click on download link from paranoid website, i see 2 files on gdrive, both for op9, but one is 2.2 gb and the other is 1.67 gb, both are dated 17/10 , so which one to download
ahmd gom3aa said:
when i click on download link from paranoid website, i see 2 files on gdrive, both for op9, but one is 2.2 gb and the other is 1.67 gb, both are dated 17/10 , so which one to download
Click to expand...
Click to collapse
Unsure try. The smaller one might be built without Gapps other with. Someone that knows will have to chime in.
Phoenix47 said:
The one with smaller size can be sideloaded with any recovery. The other one can be flashed from fastboot.
Click to expand...
Click to collapse
boggles the mind why more dont aim for fastboot update implementation. I must be missing a reason why
mattie_49 said:
Unsure try. The smaller one might be built without Gapps other with. Someone that knows will have to chime in.
Click to expand...
Click to collapse
I have tried both files via fastboot and the recovery. Everything boots but i cant sideload magisk and if i attempt to replace boot.img with a magisk flashed variant i made, it fails to boot.
any trick with this i need to be aware of?
love youuuu uuu uu
applyscience said:
I have tried both files via fastboot and the recovery. Everything boots but i cant sideload magisk and if i attempt to replace boot.img with a magisk flashed variant i made, it fails to boot.
any trick with this i need to be aware of?
love youuuu uuu uu
Click to expand...
Click to collapse
Post in thread '[ROM][OFFICIAL][lemonade][11] LineageOS 18.1' https://forum.xda-developers.com/t/rom-official-lemonade-11-lineageos-18-1.4298845/post-86264401
Read back a few and ahead a few posts. This is how I was successfull on last aospa builds.
mattie_49 said:
Post in thread '[ROM][OFFICIAL][lemonade][11] LineageOS 18.1' https://forum.xda-developers.com/t/rom-official-lemonade-11-lineageos-18-1.4298845/post-86264401
Read back a few and ahead a few posts. This is how I was successfull on last aospa builds.
Click to expand...
Click to collapse
nvm i got it. i enabled the settings below when extracting the boot.img and flashed magisk with 24.1 and then upgraded in the OS. basically kitchen sinked the troubleshooting because im so late for work lol.
thank you for the link/info as always.
Edit: Vishalcj17: this is, by far the stablest A13 ive experienced on OP9 ROMs. Everyones been doing great, but it's clear you have a deeper grasp on this whole process than the average maintainer. Loving the support, thank you for bringing PA to OP9
All I will beg and ask for is OOSCAM native support and Google dial AI call screening without the need for separate moduals. Neither are Important, its just honestly the only "issues" i seem to be left with after coming back to A13 again.
Good time, I installed this firmware and ran into a problem: After all the manipulations done, when the system starts up, pressing the screen does not respond, but the side buttons work. Tell me what can be done?
bobensky said:
Доброго времени, Установил эту прошивку и столкнулся с проблемой: После всех проделанных манипуляций при запуске системы на нажатия экран не реагирует, но боковые кнопки работают. Подскажите что можно сделать?
Click to expand...
Click to collapse
try again to install ROM on top. it looks like it has been installed in one slot
imv_9 said:
try again to install ROM on top. it looks like it has been installed in one slot
Click to expand...
Click to collapse
Thank you so much. I flashed it in both slots and it worked
bobensky said:
Good time, I installed this firmware and ran into a problem: After all the manipulations done, when the system starts up, pressing the screen does not respond, but the side buttons work. Tell me what can be done?
Click to expand...
Click to collapse
https://wiki.lineageos.org/devices/lemonade/
Read all the information on this link. It is the official wiki to flash Linage but it can help to follow this for other roms especially if you're facing issues and can't figure out what is wrong this is a good read up. Thanks for the other guy spotting out the Slots.
<Moderator Note>: Thread closed and all links removed due to the missing GPL legal required link to the kernel source code and no response.
@Vishalcj17 if you want to take care of this requirement, please just use the Report button on the OP and let us know when you're ready, then we can unlock the thread.
Thank you,
@roirraW "edor" ehT
roirraW edor ehT said:
<Moderator Note>: Thread closed and all links removed due to the missing GPL legal required link to the kernel source code and no response.
@Vishalcj17 if you want to take care of this requirement, please just use the Report button on the OP and let us know when you're ready, then we can unlock the thread.
Thank you,
@roirraW "edor" ehT
Click to expand...
Click to collapse
@Vishalcj17 Thread has been re-opened on your request. Please add the link to your kernel source within the next three days and advise @roirraW "edor" ehT when accomplished for evaluation. Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator