I hope someone can help. I am using LineageOS 18.1 with Open Gapps Pico. The custom ROM has been installed for a couple of weeks and hasn’t had too many issues - until now. (I have installed the latest patch in the past couple of days, so not sure if this is the cause of the problem, and if it is I wouldn’t know how to remove it).
I am now experiencing a problem, where the screen is freezing (see attached photo), and the only way I can find to resolve it is to physically remove the battery - although this can only be a temporary measure.
Has anyone experienced this before and is there a permanent fix / patch backout that could resolve it?
Thanks in advance.
Related
Hello and thank you for viewing my thread!
To start, my device is the OnePlus One, and i am running the latest Release of CyanogenMod 13 with the Latest Lightning Kernel for it's kexec/hardboot patch
I have tried multiple times, installing the multirom files, as well as flashing a factory image and flashing from a fresh install. Nothing seems to work.
The exact problem would be, even after performing the inject boot sector action, multiboot or the boot menu fails to appear.
I have no idea how to view kernel logs or anything of the sort. However i will gladly provide any logs or files if needed! Ill just have to figure them out is all.
Any help is greatly appreciated. Thank you in advance!
Edit:
1. I think i have the kernel ruled out as the problem as i have already tried a modified stock kernel, as well as bouffla's kernel.
2. The rom also doesnt seem to be the problem as i have tried both COS 12.1 and CM 13
3. The recovery seems to be ruled out as well. I rolled back to a previous version of TWRP and still have the same issue, no multiboot menu after proper installation.
4. This is really confusing. I even tried using the files built into the multirom manager application and that fails as well.
P.S. (on a semi-unrelated note)
I currently have a strong feeling it is a very low level issue (at least for my experience) due to the fact that kali nethunter is also failing to install and causing my device to brick every time i attempt an install.
Hi all
Recently I flashed Oreo 8.1 on my Pixel, rooted with latest magisk and flashed latest elementalX. On boot I noticed this strange popup-error (see attached image)
On every boot the popup is still there, I just have to press Ok and the popup goes away, but it's pretty annoying.
Reading here and there on internet I found that it's the DTBO error, this happens on Pixel 2s and there is a fix flashing dtbo.img, but since I'm on Pixel of first generation I can't because the factory image doesn't contain that image file.
Is there a fix? Someone knows why this is happening? (Of course it's not a big problem since it's just a popup and everything works perfectly, just wondering if I can remove it btw).
Thanks in advance.
No solution. Commonly experienced by some/most users these days. See Magisk and/or kernel threads.
This only happens after installing a custom kernel. Don't worry, there is nothing wrong with your device.
I have just installed LineageOS 16 on my phone after I thought it crashed.
Waas the volumebutton that got stuck. Had LineageOS 15.1 before.
Now to the things I need help with
1. When I used version 15.1 I had to use a custom kernel to even be able to charge the phone when it's on.
it's the same problem here. Is there any custom kernel for version 16? [Seems to be SOLVED]
2. Preparing setup wont finish after installing gapps. Just says: "Preparing for setup... You can finish seeting up your a0001 soon. [SOLVED]
3. Gmail wont sync so I cant see my messages. [SOLVED]
I hope someone can help me with this three problems.
Sorry if it has been asked before.
Problem two and three did I solve by reinstalling LineageOS and using opengapps instead of mindthegapps.
But I do still need help with the charging problem.
*UPDATE*
It seems that the charching problem got solved after the latest nightly build update.
I hope it stays that way.
So everything seems to have been solved.
Hello everyone,
I am creating this post because I would like to know if someone has already installed Ressurection Remix on a Galaxy A8 ?
I saw some tutorials that are explaining this is possible,but when I go to the Ressurection Remix official download page, I cannot find which file is specific to the galaxy A8. Actually, I have some difficulties to understand the files names : Raphael, Sakura, Jason,... Are theses names code names for différents phones ?
I may add that the bootloader of my phone is unlocked, and I am using TWRP to flash zip files.
I didn't treblelize my phone thought.
If you have some other custom rom suggestions, please do not hesitate to advise me.
You can install RR through GSI, by this link
You will have to trebelize your device
Because it's a gsi android 10, you can use vendor quack
Treble Guide
Vendor Quack
Thanks for your reply. Yes I saw that it was possible to treblelize the phone, to install other rom like the very famous lineage os.
But I am little bit hesitant about this procedure : is everything working well with the phone after a treblelization ? Has anyone tried this method?
Quentief said:
Thanks for your reply. Yes I saw that it was possible to treblelize the phone, to install other rom like the very famous lineage os.
But I am little bit hesitant about this procedure : is everything working well with the phone after a treblelization ? Has anyone tried this method?
Click to expand...
Click to collapse
Treblizing the phone itself does not cause any problem rather it enables you to install different GSIs. Regarding GSIs, each have there own bugs and you have to find them on the GSI thread if available or if they have telegram or github support.
Hey, just made an account to respond to this as I just discovered there are per-device pages on these forums and saw this post, I have done exactly that and been running it for 2+ years now, so far I have had no majour problems wih it, the only majour caviat is that after trebblimg it and installing resurrection remix It seems to freeze when trying to display the charging animation if the phone is off and it plugged in, it still charges without any problems, tho to boot it when in this situation you need to force shut it down using the volume_down + lock buttons and then immidiately after use volume_up + lock buttons to boot into recovery, then you can boot to the normal system from there, I have a TWRP recovery but I think the stock one also allows to resume booting the normal system.
In these last months I had a few weird bugs like the screen brightness beeing locked to automatic but that went away after a reboot and only happened 1 time.
I also installed magisk and a few other small tweaks and things and everything works great, also all resurrection remix customization options.
Actually in the last few months something broke because the safetynet checks fail for the ctsProfile, (most apps like my banking app tho still work fine by using magisk hide (i think it's because the safetynet basicIntegrity check still succeds) and the update page seems also broken (tho no idea about when this broke exactly as I haven't checked it in years), everything else is still fine tho, I might try re-flashing it to update to the new majour resurrection remix when i have time and the will to backup and move everything, something could have corrupted or maybe an update broke it, no idea.
My phone reports resurrection remix 7.0.2 and Android 9.
Hope this is still helpful.
Quentief said:
Thanks for your reply. Yes I saw that it was possible to treblelize the phone, to install other rom like the very famous lineage os.
But I am little bit hesitant about this procedure : is everything working well with the phone after a treblelization ? Has anyone tried this method?
Click to expand...
Click to collapse
Hi,
kinda new to custom ROMs and running into my first real problems.
I installed TWRP, LineageOS 20.0, BitGApps Basic and Magisk 26.1 on my Samsung Galaxy S10e Exynos.
After setup everything works extremely well and fast. I installed Universal SafetyNet Fix, Viper4Android (programminghoch10/ViPER4AndroidRepackaged: A refined ViPER4Android installer. (github.com)) and Universal GMS Doze (gloeyisk/universal-gms-doze: Patches Google Play services app and its background processes to be able using battery optimization (github.com)). The phone still works fine and Viper4Android works too. SafetyNet also passes.
Now the problems arise. A few hours later and some reboots later, the phone won't boot anymore (maybe 20 reboots). I didn't even change any settings before the reboots. The boot animation plays and the phone is getting reset by a watchdog maybe. Also cannot use ADB during boot and the safe mode button combination doesn't work. I'm not experienced enough to understand the log files correctly. I already flashed the phone twice and the same problem occurred.
I attached some logs I could get from TWRP, but the main data partition is encrypted.
Full log files are here: logs.zip
Otherwise I'm extremely impressed with Lineage and would love to use it as my daily.
Thanks a lot for helping.
loriZyy said:
Hi,
kinda new to custom ROMs and running into my first real problems.
I installed TWRP, LineageOS 20.0, BitGApps Basic and Magisk 26.1 on my Samsung Galaxy S10e Exynos.
After setup everything works extremely well and fast. I installed Universal SafetyNet Fix, Viper4Android (programminghoch10/ViPER4AndroidRepackaged: A refined ViPER4Android installer. (github.com)) and Universal GMS Doze (gloeyisk/universal-gms-doze: Patches Google Play services app and its background processes to be able using battery optimization (github.com)). The phone still works fine and Viper4Android works too. SafetyNet also passes.
Now the problems arise. A few hours later and some reboots later, the phone won't boot anymore (maybe 20 reboots). I didn't even change any settings before the reboots. The boot animation plays and the phone is getting reset by a watchdog maybe. Also cannot use ADB during boot and the safe mode button combination doesn't work. I'm not experienced enough to understand the log files correctly. I already flashed the phone twice and the same problem occurred.
I attached some logs I could get from TWRP, but the main data partition is encrypted.
Full log files are here: logs.zip
Otherwise I'm extremely impressed with Lineage and would love to use it as my daily.
Thanks a lot for helping.
Click to expand...
Click to collapse
If it is an issue with the ROM itself, you will need to post your issue in the ROM thread where you got your ROM and see if there is something in the ROM that the developer of the ROM needs to fix in the ROM itself.
Hi, kinda new to custom ROMs and tried out Lineage and later Crdroid on my Galaxy S10e Exynos.
The OS works fine but after a few restarts the phone randomly bootloops and I can't find any way to fix it.
Currently installed is Crdroid recovery, Crdroid latest (the same problem happens with Lineage) with Android 13, MindTheGapps, Magisk 25.2
Magisk modules are Zygisk, Viper4Android and Universal SafetyNet Fix.
I attached some logs but I'm too inexperienced too read them correctly. It looks like the file
Code:
/data/misc_de/0/apexdata/com.android.permission/runtime-permissions.xml
is corrupted after a few restarts?? The bootlogo just repeats and nothing is happening. The logs say that the zygote process has crashed.
Does anyone know what to do? Thanks a lot!
Logs: log.txt
This used to happen on my Galaxy A50 on another ROM too, and since it's not an S10e problem it's probably a Magisk module