I just bought a 8” Joying JY-UQD80N4G unit, and I’m wondering if there is a way to root it? I’m new to the business of rooting and Android head units in general, so I’m not sure where to look. I’ve seen a few guides on rooting joying devices here, but most of them seem to be made for older Android versions. I don’t want to mess up and end up bricking my new head unit. Can anyone help?
Yes. Get the firmware from joying support. and note its install instructions
Find the boot.imgand patch it with magisk,
[GUIDE] Pixel 5 "redfin": Unlock Bootloader, Update, Root, Pass SafetyNet
If you are looking for my guide on a different Pixel, find it here: Pixel 3 Pixel 3XL Pixel 3a Pixel 3aXL Pixel 4 Pixel 4XL Pixel 4a Pixel 4a (5G) Pixel 5a Pixel 6 Pixel 6 Pro For best results, use the latest stable Magisk release. Discussion...
forum.xda-developers.com
See section, "Spoiler: Initial Root / Create Master Root Image" should help
But instead of using the flashing commands, repack the zip/bin file with your new boot.img replacement and following the install insstuctions.
There are some threads that describe this already:
HowTo: Root Joying SC9853i Head Unit
First off a big thanks to the guys at {Mod edit} for doing all the hard work, I'm just writing this post as a guide for those who don't speak Russian - like myself :) Second thanks to all those on the Original Thread...
forum.xda-developers.com
forgivegod said:
There are some threads that describe this already:
HowTo: Root Joying SC9853i Head Unit
First off a big thanks to the guys at {Mod edit} for doing all the hard work, I'm just writing this post as a guide for those who don't speak Russian - like myself :) Second thanks to all those on the Original Thread...
forum.xda-developers.com
Click to expand...
Click to collapse
The above link is for the sc9853i. The uis7862 needs the same approach but different binaries/libraries as the sc9853i is an x86 chip and the uis7862 is an ARM chip. That is a different CPU architecture. If you really want to know how to do it, you need to search on 4pda. There are 3 different ways of doing that.
Furthermore: the 6315_1.zip is identical for all FYT uis7862 units. There are 6315_1.zip versions there with a "baked in" rooted boot.img. It is not all so difficult and not so different from the sc9853i, but it IS different.
And again: Why do you want to root it? On the higher Android versions rooting doesn't add much. It breaks Google voice feedback. It blocks more and more apps that check whether they are started on a rooted device. Viper4Android doesn't work on these units (and it useless now with the DSP enabled units).
So why?
surfer63 said:
And again: Why do you want to root it?
Click to expand...
Click to collapse
I'd like to root it because I'd like to use one of logcat viewer apks, but these don't work without it.
Could somebody help rooting the latest joying UIS firmware?
spdri said:
I'd like to root it because I'd like to use one of logcat viewer apks, but these don't work without it.
Could somebody help rooting the latest joying UIS firmware?
Click to expand...
Click to collapse
I have mentioned it earlier. There are 3 different rooting scripts in the uis7862 section on 4pda. We are not allowed to directly link (as 4pda is also supposed to have illegal software, which is actually not true)
Edit: well, to help you a little. Search under user @gordgelin for "universal root" on 4pda
spdri said:
I'd like to root it because I'd like to use one of logcat viewer apks, but these don't work without it.
Could somebody help rooting the latest joying UIS firmware?
Click to expand...
Click to collapse
I'd like to root it because malwarebytes is getting tetchy about devicetest and believes it's cloaked adware (yota)
As it can be stopped but not disabled (extremely suspicious for a "test" app), I tend to agree and want to nuke it
Install Magisk and than flash the script, see attachment.
That worked perfectly
Thank you!!
(I'd tried following other threads and using ADB, etc - which didn't work, so I'm extremely grateful)
Anyone care to write a root for the ownice k7 and t'eyes CC3... Please
jawbraeka2 said:
Anyone care to write a root for the ownice k7 and t'eyes CC3... Please
Click to expand...
Click to collapse
Stop it
Related
MTCD Oreo ROM Extract/Dump is here: ROM
An example of XDA teamwork - Thanks to:
@ikerg
@xdamember2 @RedScorpioXDA
@kumarai
Solution see post 159, thanks @kumarai
Process video again thanks to @kumarai
- note the approx 5 minutes of grey screen before "erase" is seen, proceeding first SDCard install of android 8 recovery files.
Team effort. Noted no BT with wd725 (integrated wifi/bt.)
Technical details of the 'Upgrade" - maybe useful in other upgrade scenarios:
- The Android 6 [update.img] [miniloaderall.bin] has been replaced with the Oreo [miniloaderall.bin] from the Oreo OTG ROM Extract.
- The modifed Android 6 update image is used to create a bootable SDCARD. containing the the Oreo Miniloader.
- SDCARD flashes the OREO Recovery images to NAND.
- With Oreo Recovery installed, .ZIP upgrade images can be installed.
Hi,
With resellers not proving a PX5 Oreo ROM image and no other member having OTG and as I have OTG and the jig/tools I could provide a ROM extract if the community provides a PX5 Oreo core board or complete unit.
Any supporters for either loaning a PX5 Oreo SOM or funding a complete unit?
If loaned I would extract ROM and return SOM within 2 days.
marchnz said:
Hi,
With resellers not proving a PX5 Oreo ROM image and no other member having OTG and as I have OTG and the jig/tools I could provide a ROM extract if the community provides a PX5 Oreo core board or complete unit.
Any supporters for either loaning a PX5 Oreo SOM or funding a complete unit?
If loaned I would extract ROM and return SOM within 2 days.
Click to expand...
Click to collapse
I will likely be able to loan a unit or SOM within a week or so. I noticed the SOM rev 8 (used in the Oreo hu) has more header pins than the earlier version though some may be blank. Is your hardware compatible?
A ROM Image has been availible here for almost a week now.
https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189
Psycho Dave said:
A ROM Image has been availible here for almost a week now.
https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189
Click to expand...
Click to collapse
Unfortunately, not. It is an OTA/zip upgrade and not an IMG.
xdamember2 said:
I will likely be able to loan a unit or SOM within a week or so. I noticed the SOM rev 8 (used in the Oreo hu) has more header pins than the earlier version though some may be blank. Is your hardware compatible?
Click to expand...
Click to collapse
Thanks, who is manufacturer, HCT or Joyings STT?
Are you able to post JPGs?
marchnz said:
Thanks, who is manufacturer, HCT or Joyings STT?
Are you able to post JPGs?
Click to expand...
Click to collapse
It should be compatible since HA has offered me an Octacore 4 gb RAM SOM to upgrade my 2 gb HU to Android 8.
Oberbergler said:
It should be compatible since HA has offered me an Octacore 4 gb RAM SOM to upgrade my 2 gb HU to Android 8.
Click to expand...
Click to collapse
I can post jpegs however the unit is currently installed. The rom is hct, the mcu is gs and the SOM is hct . I should receive another presumably identical hu today.
marchnz said:
Thanks, who is manufacturer, HCT or Joyings STT?
Are you able to post JPGs?
Click to expand...
Click to collapse
Here is the SOM and mainboard.
https://s.amsu.ng/mtYfNnUStbhN
xdamember2 said:
Here is the SOM and mainboard.
https://s.amsu.ng/mtYfNnUStbhN
Click to expand...
Click to collapse
Thanks - unit is an MTCD (possibly GS) with HCT SOM.
xdamember2 said:
Here is the SOM and mainboard.
https://s.amsu.ng/mtYfNnUStbhN
Click to expand...
Click to collapse
Can you post again ? - The link has expired already
marchnz said:
Thanks - unit is an MTCD (possibly GS) with HCT SOM.
Click to expand...
Click to collapse
I ve never seen an MTC SoM that isnt made by HCT.
typos1 said:
Can you post again ? - The link has expired already
I ve never seen an MTC SoM that isnt made by HCT.
Click to expand...
Click to collapse
Here's a new link.
https://s.amsu.ng/m6vqXHrYS5gN
This one is also very temporary.
---------- Post added at 05:45 PM ---------- Previous post was at 05:42 PM ----------
marchnz said:
Thanks - unit is an MTCD (possibly GS) with HCT SOM.
Click to expand...
Click to collapse
Would you pm me your shipping address or postal code, and I'll check the rates?
xdamember2 said:
Here's a new link.
https://s.amsu.ng/m6vqXHrYS5gN
This one is also very temporary.
Click to expand...
Click to collapse
Thanks, dont want to sound ungrateful but have you got a higher resolution ? Its so low that you cant make out anything.
typos1 said:
Thanks, dont want to sound ungrateful but have you got a higher resolution ? Its so low that you cant make out anything.
Click to expand...
Click to collapse
I'm a bit new to this. I see when I click the link there's an image and also a "download" button. If I download there's a jpeg sharp enough to read the silkscreen. (Unless Samsung is only allowing downloads to Samsungs?) I took the pic with my cellphone, I could also do one on the dslr.
typos1 said:
Thanks, dont want to sound ungrateful but have you got a higher resolution ? Its so low that you cant make out anything.
Click to expand...
Click to collapse
I zipped the pic and now I should be able to attach it directly. Please let me know if higher res is required.
Does anyone know if the interface board provides better (i.e. multiple) USB ports now (i.e. not a single USB port split with a hub), and/or if the USB is better than the prior USB speed and power provided?
Ditto -- now Bluetooth 5.0?
xdamember2 said:
I zipped the pic and now I should be able to attach it directly. Please let me know if higher res is required.
Click to expand...
Click to collapse
Thanks.
So it is HCT PX5 SoM Rev8.0 Designed 2017-06-09 Interesting.
It looks like targeted at 8.0 Beta 2 time SoM prototype rushed into manufacturing?
PekeMM said:
It looks like targeted at 8.0 Beta 2 time SoM prototype rushed into manufacturing?
Click to expand...
Click to collapse
Why would you say that ? My MM 4Gb RK3368/PX5 SoM is also rev8.0.
@marchnz you could try using MTCD ROM Builder (here, needs a Linux machine : https://forum.xda-developers.com/an...re-development/tool-mtcd-rom-builder-t3475444 ) to make an image using the files in the zip. Theres the option to use FUSE which may get a round any partitioning problems.
I use Linux so I can make an image if youve got somewhere I can upload it to.
Maybe I ll try it myself, its just the hassle of trying to unbrick it if it bricks.
EDIT: just re read that thread and see youve already posted in it and used it on your RK3368/PX5, not sure it would work anyway as I think it requires a proper image already, dont think it can make one from separate images.
typos1 said:
Why would you say that ? My MM 4Gb RK3368/PX5 SoM is also rev8.0.
@marchnz you could try using MTCD ROM Builder (here, needs a Linux machine : https://forum.xda-developers.com/an...re-development/tool-mtcd-rom-builder-t3475444 ) to make an image using the files in the zip. Theres the option to use FUSE which may get a round any partitioning problems.
I use Linux so I can make an image if youve got somewhere I can upload it to.
Maybe I ll try it myself, its just the hassle of trying to unbrick it if it bricks.
EDIT: just re read that thread and see youve already posted in it and used it on your RK3368/PX5, not sure it would work anyway as I think it requires a proper image already, dont think it can make one from separate images.
Click to expand...
Click to collapse
To create the image we need the partition addresses....so..unless we got an update with the classic .img or we could dump it from an already MTCD px5 under android 8.
I am going to receive a 4gb/32 px5 board with preinstalled android 8...but I don't know how to do for my pc to recognize it in order to dump the software...(I did before for android tv under rk3288)
Any suggestion?
Enviado desde mi SM-G950F mediante Tapatalk
ikerg said:
To create the image we need the partition addresses....so..unless we got an update with the classic .img or we could dump it from an already MTCD px5 under android 8.
I am going to receive a 4gb/32 px5 board with preinstalled android 8...but I don't know how to do for my pc to recognize it in order to dump the software...(I did before for android tv under rk3288)
Any suggestion?
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
But would we need the partition addresses if we create a FUSE ROM ? - MTCD ROM Builder will make one big partition surely ?
I could try using an MM RK3368/PX5 image and adding the separate images from the Oreo update.zip.
Here was a Guide. Someone said people don't care about Me or My Work so...
does it require an unlock bootloader?is it prerooted?does it have drm keys? sorry for the questions.
nolihowell said:
does it require an unlock bootloader?is it prerooted?does it have drm keys? sorry for the questions.
Click to expand...
Click to collapse
Yes, You need to be unlocked, otherwise is there no chance to flash with fastboot. Besides the rooting of the Kernel is everything Stock. Everything works so far even with GSIs
Where did you get the Customized EU 55.1.A.0.748 J9210 ?? I does not appear on XperiFirm.
nreuge said:
Where did you get the Customized EU 55.1.A.0.748 J9210 ?? I does not appear on XperiFirm.
Click to expand...
Click to collapse
My Bad, it is the UK one... I'm also still waiting for customized EU which was always My Choice for Xperia Sources and Development. I'm currently working with GSIs on My Xperia 5 but think i will Release some Stock work soon since i prefer Xperia Android actually over AOSP...
Users will be able to use any Base Firmwares (Android 10) for it but i will personally Test on Custom EU :fingers-crossed:
@Miustone will you be releasing a boot.img for the latest security patch?
fcb13 said:
@Miustone will you be releasing a boot.img for the latest security patch?
Click to expand...
Click to collapse
Just downloaded J9210_Customized EU3_1320-1208_55.1.A.3.49_R2B. I will release a Update after getting it running on My X5 this Weekend alongside with a Magisk Module Update for XPIXELERIA https://github.com/Miustone/XPIXELERIA
BR
Miustone said:
Just downloaded J9210_Customized EU3_1320-1208_55.1.A.3.49_R2B. I will release a Update after getting it running on My X5 this Weekend alongside with a Magisk Module Update for XPIXELERIA https://github.com/Miustone/XPIXELERIA
BR
Click to expand...
Click to collapse
@Miustone Sorry to bother you here, but I am struggling with patching the Xperia 1 .sin boot image with any current version of Magisk. I've tried a few versions but they all fail to create the image from the .sin file. Any help you can provide is greatly appreciated!
I should add, I was trying to use these instructions: https://forum.xda-developers.com/xperia-1/how-to/xperia-1-root-guide-t3938304
charlatan01 said:
@Miustone Sorry to bother you here, but I am struggling with patching the Xperia 1 .sin boot image with any current version of Magisk. I've tried a few versions but they all fail to create the image from the .sin file. Any help you can provide is greatly appreciated!
I should add, I was trying to use these instructions: https://forum.xda-developers.com/xperia-1/how-to/xperia-1-root-guide-t3938304
Click to expand...
Click to collapse
Just read the first Post of this Thread and You will get everything You'll need.
EDIT: Since You just need a .img File for Magisk is there no need to share it with Me actually. Just patch it in the Magisk Manager App and flash it with fastboot afterwards.
Miustone said:
Just read the first Post of this Thread and You will get everything You'll need.
EDIT: Since You just need a .img File for Magisk is there no need to share it with Me actually. Just patch it in the Magisk Manager App and flash it with fastboot afterwards.
Click to expand...
Click to collapse
Ah, okay. Thanks. One last stupid question.. for the firmware, does it matter if the img file comes from the Android 10 firmware? I am planning to flash my Xperia 1 with PE, which is still Pie.
charlatan01 said:
Ah, okay. Thanks. One last stupid question.. for the firmware, does it matter if the img file comes from the Android 10 firmware? I am planning to flash my Xperia 1 with PE, which is still Pie.
Click to expand...
Click to collapse
Prefer a newer Base Firmware over a newer GSI. A Android 9 GSI will run better with Android 10 Kernel as vice versa. Pie will be no Problem if You run Android 10 Vendor and Kernels. Happy flashing! :fingers-crossed:
EDIT: There are also PE Android 10 Builds out there... https://forum.xda-developers.com/pr...iscussion/gsi-expressluke-built-gsis-t4003457
help me
hi i need a boot.img for my xperia 1 j8170 please help me 10 (55.1.a.3.107)
This method has always been magisk module not friendly. audio compat worked. But once i through more at it it bricked device and had to reflash with new flasher
Hi
Can you please patch this file for me (Device = J9210 Dual | Firmware = 55.1.A.3.149)
boot_X-FLASH-ALL-A2CD.7z
Kind Regards
After I get root, can I completely deGoogle my phone? Since there is no Lineage OS for XPERIA 5, can I manually get rid of all of Google's stuff?
Help is greatly appreciated.
Thank you.
BuyXRPnow! said:
After I get root, can I completely deGoogle my phone? Since there is no Lineage OS for XPERIA 5, can I manually get rid of all of Google's stuff?
Help is greatly appreciated.
Thank you.
Click to expand...
Click to collapse
Yes You can. But You can also install LOS 17.1 from the GSI Forums. I also did Instructions for flashing GSI Treble ROMs in the Xpiera 5 Guides Forum :good:
After that You may want to have Magisk to pass safetynet and to install MicroG or NanoDroid to get everything working. I'm actually running PHHs AOSP with My SOM Module and it's one of My Favorites so far. You may also like Havoc OS Official which also comes as no Google Apps Version. You can do the same on Havoc like You can on LOS but + endless Costomization
Miustone said:
Yes You can. But You can also install LOS 17.1 from the GSI Forums. I also did Instructions for flashing GSI Treble ROMs in the Xpiera 5 Guides Forum :good:
After that You may want to have Magisk to pass safetynet and to install MicroG or NanoDroid to get everything working. I'm actually running PHHs AOSP with My SOM Module and it's one of My Favorites so far. You may also like Havoc OS Official which also comes as no Google Apps Version. You can do the same on Havoc like You can on LOS but + endless Costomization
Click to expand...
Click to collapse
I really appreciate your reply, but I am a complete noob and all this is extremely overwhelming.
"PHHs AOSP with My SOM Module" - this alone gives me terrors
I know nothing about these things but I understand you, it's just everyday business for you coz you are a developer. I tried reading your guides and there are so many things I don't understand. I also was traumatized by rooting my S10, which I sold and got Xperia 5 instead. I read here people said I will permanently lose DRM keys after rooting. This is my biggest problem. With S10 I knew I could go back to stock and not worry. Here, if I go all the way and deGoogle my Xperia and it doesn't work the way it should I won't be able to go back and on top of that selling it will be harder and I will lose money since not everyone is willing to buy a phone which can't get Netflix and other DMR-dependent garbage.
Maybe I could sponsor you to help me flashing all the stuff. I just don't know if it's a crazy idea. Also, asking you to rewrite your guides for idiots like me is asking too much, given how busy you are.
If you have some advice I would greatly appreciate it.
BuyXRPnow! said:
I really appreciate your reply, but I am a complete noob and all this is extremely overwhelming.
"PHHs AOSP with My SOM Module" - this alone gives me terrors
I know nothing about these things but I understand you, it's just everyday business for you coz you are a developer. I tried reading your guides and there are so many things I don't understand. I also was traumatized by rooting my S10, which I sold and got Xperia 5 instead. I read here people said I will permanently lose DRM keys after rooting. This is my biggest problem. With S10 I knew I could go back to stock and not worry. Here, if I go all the way and deGoogle my Xperia and it doesn't work the way it should I won't be able to go back and on top of that selling it will be harder and I will lose money since not everyone is willing to buy a phone which can't get Netflix and other DMR-dependent garbage.
Maybe I could sponsor you to help me flashing all the stuff. I just don't know if it's a crazy idea. Also, asking you to rewrite your guides for idiots like me is asking too much, given how busy you are.
If you have some advice I would greatly appreciate it.
Click to expand...
Click to collapse
First of all. Good choice to get rid of a Samsung Device Like i did with My S9+! Sammy is pushing Android into a Appleish Edge that shouldn't exist...
Just like Huawei. But different Story...
Out of My View with Years of expierence with different Brands is SONY one of the Most supporting OEM in Views of Android Development besides the Fact they Always excluded some functionality of the included Smartphone Hardware. For example:
-Xperia Z1 lost the Complete Camera Function after unlocking (Got fixed with a Update later after Claims from Customers) and lost Display enhancements + Camera Noise reduction
-Xperia Z3 lost the Vibrant Display Colors after unlocking (Aka Bravia Engine) which ended Up in washed Out Colors and was still loosing Noise reduction
-Xperia XZ Premium still loosing enhancements after unlocking plus the loss of Camera Noise reduction
And now the Xperia 5...
Sony used for the First Time Samsung Sensors for the Cameras instead of own ones with High Resolution. So no Noise Reduction needed anymore. Finally OLED, so no washed Out colors without Display Enhancements.
I'm quite Happy with this One since you don't loose Something Essential. Besides that have i Always Managed since the Z3 to fix almost all Problems on Xperias with native Android functionalities that is used on other Devices. Eg. For the Display, Audio, Camera, Mics and so on.
And thats the final Point. While older Devices Had the Chance to Backup and restore the TA Partition or even to use a Recovery on locked Bootloader (I've also worked with this for some Time) which allowed to make Your Device Complete Stock again. We don't really have that Options anymore. So i would say an Unlock is a final Step. But to be honest. I sold many Devices claimed as unlocked and rooted and it hasn't Cut the Price at all. And even if You Don't. I don't think a normal Person will See a difference after unlocking and relocking
Is it worth it? For Me a clear Yes! I never looked back after unlocking any of My "Hundreds" of Devices i used. Magisk and GSIs alone are really worth the Unlock Out of My View actually. You can do so much with Android and it finally doesn't feels Bad anymore on Xperias. My SOM (Magisk based ROM (Systemless-On-Memory) will do a lot of awesome Things with Our Xperias (1 & 5). Another good Reason maybe...
It could be smart to make a Video which explains how to get My Work on Your Xperias. From unlocking to Flashing... Would really like to do that after some preparing for it. Possible that there are a lot of People who don't even know about Bootloader unlocking so it really could be cool. I already did some Videos in the Past; https://www.youtube.com/user/TheMarius517
Think i got a bit lazy since the Software alone takes so much time These days. But i will do My best to get People in Touch and to Show everything step by step.
Lot of Text but Hope i made Your decision to Unlock or not easier... Don't think about the Future of Your Device. Think about what You want from it right now...:good:
Btw. Not Sure but You could try ADB to remove Apps. But idk. If IT IS possible with Google Apps (Locked Bootloader Method)
All the Best,
Miu
Thank you! You are a hero. I will be waiting for your updated guides and possibly a video for noobs. Appreciate your time!
Peace.
Optimized the Thread Structure and Instructions. Optimized Thread Title. Updated Boot Image / Kernel to latest EU .149
Hey, i'm a lucky owner of my Seicane Head Unit for my old Honda Jazz.
I'm looking for a MCU file of my HU.
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
If anyone can help with MCU file (or provide a list of file which is fully complatible with current one) i will really appreciate it.
LordBel said:
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
Click to expand...
Click to collapse
mmm... MTCP? not MTCE?
Compatibility with MTCD/MTCE (this forum section) is not very clear...
BTW, this section is for the software development... you should ask in the general sections...
themissionimpossible said:
mmm... MTCP? not MTCE?
Click to expand...
Click to collapse
Yes, MTCP. As far as i understand P - is for 8-channel audio. Maybe there are some other differences, but this is the one i'm aware of.
Can you please share what you have? i will try to check if it can be flashed on my HU.
Thanks!
I have a MTCE_HF with MCU v. 3.30 (the latest known on the net), but I suspect it's not compatible with your HU, but anyway you have already a v 3.30, even if it's a v. 3.30_1 (for MTCP?).
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
Hi, I am hoping on getting some help. I have been struggling to get any updates past the PROS2106071OS00MP2 build. I had that build almost since I purchased the phone.
I've been wanting to update it for so long cause of the NFC update and overall, remove some bugs in the OS. But I have been unable to update it, either via the phone or manually (Using the *#*#1027#*#*).
I found this file online: [SFMobile]PROS2105121CN00MP4 but I don't know how to proceed from there. Im hoping you guys could help me with a global version OTA files, or maybe a way I could flash it using the Fastboot.
My phone is not rooted nor has bootloader unlocked, it's set to factory configurations. Please, I need help updating this phone, I feel I am missing a lot of updates at this point. Its almost going to be a year from the last Google security update that my phone has.
Thanks
Follow this instructions to manually update with an OTA file
MiSSigNNo said:
Follow this instructions to manually update with an OTA file
Click to expand...
Click to collapse
Thanks for replying. As I stated in my post, i already attempted the code method. I am just unable to find the OTA files for MP3. The MP4 one I found fails when trying to update, it says it is unauthorized. Either way, could you help me with a link to download the MP2 file?
Here you have the OTA DELTA from MP2 to MP3
Share Rom Black Shark 4 - 4 Pro | Global Rom - China Rom
Hello, nice to see you again in a new thread. I hope that all of you, as a non-specialist user, please do not arbitrarily interfere with the device without specific instructions from us. However, you are the hardworking bees that will help us a...
forum.xda-developers.com
MiSSigNNo said:
Here you have the OTA DELTA from MP2 to MP3
Share Rom Black Shark 4 - 4 Pro | Global Rom - China Rom
Hello, nice to see you again in a new thread. I hope that all of you, as a non-specialist user, please do not arbitrarily interfere with the device without specific instructions from us. However, you are the hardworking bees that will help us a...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks for the replies, it did work! I'm rocking with the mp5 update right now, everything feels more optimized than before. I made a threat with a bunch of OTA files, here it is if you're interested.
Onedrive - OTA updates
Hello, Black Shark 4 community. I just compiled a lot of OTA files that I found online. Mostly from this threat: https://forum.xda-developers.com/t/share-rom-black-shark-4-4-pro-global-rom-china-rom.4287717/page-4 Just wanted to make it easy for...
forum.xda-developers.com
Hi! Has anyone tried to flash a GSI rom on Xiaomi 13? If yes how does it work?
Thanks in advance
Currently there is no GSI working on this model AFAIK. Wait for device specific ports instead.
---
EDIT: This is not true. See the replies below.
rikumi said:
Currently there is no GSI working on this model AFAIK. Wait for device specific ports instead.
Click to expand...
Click to collapse
Thank you for answer, I hope they'll arrive soon
what is important is the architecture not the model
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
NOSS8 said:
what is important is the architecture not the model
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
Have you tried any of these? Does it works on Xiaomi 13? Thank you in advance
Nope, I don't install gsi rom on my devices.
Snapdragon 8 Gen 1/2 ARM64(V9) - X86.
GSI on Xiaomi 12 Pro
after testing several Treble GSis, I finally found CherishOS. Most of them are not booting, or other issues (no mobile data, only calling, settings are crashing,....). Save your time and choose CherishOS. How I flashed it: 1. clean flash...
forum.xda-developers.com
They may have others with less bugs or updates.
NOSS8 said:
Nope, the does not install gsi rom on my devices.
Snapdragon 8 Gen 1/2 ARM64(V9) - X86.
GSI on Xiaomi 12 Pro
after testing several Treble GSis, I finally found CherishOS. Most of them are not booting, or other issues (no mobile data, only calling, settings are crashing,....). Save your time and choose CherishOS. How I flashed it: 1. clean flash...
forum.xda-developers.com
They may have others with less bugs or updates.
Click to expand...
Click to collapse
It seems that there are a lot of problems unfortunately yet... however thank you very much!
saluzzo997 said:
It seems that there are a lot of problems unfortunately yet... however thank you very much!
Click to expand...
Click to collapse
As written above, do research on devices with the same soc, One plus, Samsung etc.
There are surely some with little or no bug.
NOSS8 said:
As written above, do research on devices with the same soc, One plus, Samsung etc.
There are surely some with little or no bug.
Click to expand...
Click to collapse
Thank you!
I am using Project elixir for almost 2 weeks now. So far so good.
I suggest you dont flash it but instead usi it via DSU. Autobrightness is not working, fingerprint too. There are gcam ports wich are also compatible with our device. Battery life is better than miui. Even adding a card to google wallet works fine, until a reboot.
Lhunar said:
I am using Project elixir for almost 2 weeks now. So far so good.
I suggest you dont flash it but instead usi it via DSU. Autobrightness is not working, fingerprint too. There are gcam ports wich are also compatible with our device. Battery life is better than miui. Even adding a card to google wallet works fine, until a reboot.
Click to expand...
Click to collapse
Sorry but what do you mean with "use it via DSU"? What does DSU mean? Is there a tutorial for it? Thank you in advance!
saluzzo997 said:
Sorry but what do you mean with "use it via DSU"? What does DSU mean? Is there a tutorial for it? Thank you in advance!
Click to expand...
Click to collapse
You shouldve just used google to understand better. But basically its a subsystem method wich was implemented to allow a/b partition devices to be able to run gsis' for testing purposes, without the need of flashing and deleting the original os. Think of it as dualboot for android. The only thing is that if you're using it via dev settings, you dont have the choice of selecting what to boot, but your device will directly download google's official gsi (wich is not very functional and its ugly).
Thats why you just need to download the DSU Sideloader app from PlayStore. The app will do everything with a gsi of your choice if you follow the instructions.
The only thing wich is mandatory is that the BL of your device must be unlocked in order to use dsu.
There are videos on YT showing this. If you want to try the gsi I mentioned, download it from their website.
Lhunar said:
You shouldve just used google to understand better. But basically its a subsystem method wich was implemented to allow a/b partition devices to be able to run gsis' for testing purposes, without the need of flashing and deleting the original os. Think of it as dualboot for android. The only thing is that if you're using it via dev settings, you dont have the choice of selecting what to boot, but your device will directly download google's official gsi (wich is not very functional and its ugly).
Thats why you just need to download the DSU Sideloader app from PlayStore. The app will do everything with a gsi of your choice if you follow the instructions.
The only thing wich is mandatory is that the BL of your device must be unlocked in order to use dsu.
There are videos on YT showing this. If you want to try the gsi I mentioned, download it from their website.
Click to expand...
Click to collapse
Thank you very much for your explanation and sorry to have asked to you what DSU was, I just wanted to be sure that we were talking about the same thing, I'll give it a try!
saluzzo997 said:
Thank you very much for your explanation and sorry to have asked to you what DSU was, I just wanted to be sure that we were talking about the same thing, I'll give it a try!
Click to expand...
Click to collapse
No problem, I dont mind explaining, but there are pretty detailed articles, wich may enlighten you better than I can do it. Anyways, if/when you try it you'll really understand how much MIUI is ruining the experience of that pretty device. I was thinking about selling it 3 days after i got it, only because of that deprecated UI with stupid restrictions. I'm really glad i searched and tried stuff. Good luck!
Lhunar said:
No problem, I dont mind explaining, but there are pretty detailed articles, wich may enlighten you better than I can do it. Anyways, if/when you try it you'll really understand how much MIUI is ruining the experience of that pretty device. I was thinking about selling it 3 days after i got it, only because of that deprecated UI with stupid restrictions. I'm really glad i searched and tried stuff. Good luck!
Click to expand...
Click to collapse
Thank you very much, I hate MIUI too and I was doing the same thing selling this awesome phone because of that, thank you again!
Lhunar said:
No problem, I dont mind explaining, but there are pretty detailed articles, wich may enlighten you better than I can do it. Anyways, if/when you try it you'll really understand how much MIUI is ruining the experience of that pretty device. I was thinking about selling it 3 days after i got it, only because of that deprecated UI with stupid restrictions. I'm really glad i searched and tried stuff. Good luck!
Click to expand...
Click to collapse
Hi, sorry if I bother you, I've just tried with project elixir GSI using DSU sideloader, but I don't know why when I restart by clicking on notification it doesn't even boot on my GSI... I've installed the sideloader as root installation... I don't know why it's not working...
saluzzo997 said:
Hi, sorry if I bother you, I've just tried with project elixir GSI using DSU sideloader, but I don't know why when I restart by clicking on notification it doesn't even boot on my GSI... I've installed the sideloader as root installation... I don't know why it's not working...
Click to expand...
Click to collapse
Well I'm not using root. I gave permissions via adb and i have no problems. What rom chinese or global ? or maybe you're using something custom like xiaomi eu?
Lhunar said:
Well I'm not using root. I gave permissions via adb and i have no problems. What rom chinese or global ? or maybe you're using something custom like xiaomi eu?
Click to expand...
Click to collapse
Yeah, I'm on EU
saluzzo997 said:
Yeah, I'm on EU
Click to expand...
Click to collapse
Thats your problem. When I tried this on eu it wasnt working.
Lhunar said:
Thats your problem. When I tried this on eu it wasnt working.
Click to expand...
Click to collapse
Oh...what a bad luck... thank you very much for your help