Database Info

NAND write error - same ol' story

Hi all,
I was asked to look at a Galaxy Note 10.1 GT-N8000 by a colleague. It had been upgraded to 4.4.2, all was fine for a few days until it crashed. It's now in a bootloop spinning on the Samsung screen.
I can access Download mode, but no recovery.
Download screen says:
ODIN MODE
Product Name: GT-N8000
Current Binary: Samsung Official
System Status: Official
RP SWREV: A2
I've tried multiple versions of Odin, multiple official firmwares and multiple recoverys (custom/stock). Generally I get a NAND write Start.. FAILED message for most things. One bootloader file gave me "invalid magic string", and by manually packing files to .tar.md5 format, I can get a blue download bar appear on the tablet but nothing ever happens.
Heimdall is able to read the pit file from the device, but not flash anything (unable to confirm end of file transfer)
This seems to either be failed eMMC, or the bootloader is locked and I just haven't hit the correct software yet. I've been on this for days and don't seem to be getting anywhere.. Where do I go from here? And am I correct in thinking that I cannot access ADB from download mode; the device would need to boot to enable USB debugging?
Thanks in advance.

See PIT files flashing .
http://forum.xda-developers.com/showthread.php?t=2363703

Hi JJEgan,
Forgot to include that in my original post.
I've tried a few PIT files with no success. It fails at re-partitioning with Odin, and fails to transfer the pit with Heimdall.
Cheers

artois7 said:
Hi all,
I was asked to look at a Galaxy Note 10.1 GT-N8000 by a colleague. It had been upgraded to 4.4.2, all was fine for a few days until it crashed. It's now in a bootloop spinning on the Samsung screen.
I can access Download mode, but no recovery.
Download screen says:
ODIN MODE
Product Name: GT-N8000
Current Binary: Samsung Official
System Status: Official
RP SWREV: A2
I've tried multiple versions of Odin, multiple official firmwares and multiple recoverys (custom/stock). Generally I get a NAND write Start.. FAILED message for most things. One bootloader file gave me "invalid magic string", and by manually packing files to .tar.md5 format, I can get a blue download bar appear on the tablet but nothing ever happens.
Heimdall is able to read the pit file from the device, but not flash anything (unable to confirm end of file transfer)
This seems to either be failed eMMC, or the bootloader is locked and I just haven't hit the correct software yet. I've been on this for days and don't seem to be getting anywhere.. Where do I go from here? And am I correct in thinking that I cannot access ADB from download mode; the device would need to boot to enable USB debugging?
Thanks in advance.
Click to expand...
Click to collapse
I've been facing the same thing these days. I was able to install a STOCK ROM here that worked. Well, it's a 4.0.4 android version and it's not recognizing my SIM card, hahaha but it worked until I figure out how to get back to my Gnabo rom OR any other one that can work properly and be rooted after. I can't tell that the same rom i used will work for you cause of the region, but If you would like to try, I can post here and you can flash it and see what happens. Although there is PIT files for 4.0.4 that might me suitable for the rom I've used. =D

vitortakeda said:
I've been facing the same thing these days. I was able to install a STOCK ROM here that worked. Well, it's a 4.0.4 android version and it's not recognizing my SIM card, hahaha but it worked until I figure out how to get back to my Gnabo rom OR any other one that can work properly and be rooted after. I can't tell that the same rom i used will work for you cause of the region, but If you would like to try, I can post here and you can flash it and see what happens. Although there is PIT files for 4.0.4 that might me suitable for the rom I've used. =D
Click to expand...
Click to collapse
What were your symptoms? worth a shot. Thanks.

I have a problem on /efs stuff, well so far I wasn't able to solve it, but as I said, the only rom that was able to be installed was the 4.0.4.
That is the rom i've used.
http://eusouandroid.com/tutorial-rom-original-galaxy-note-10-1-gt-n8000-android-4-0-4/

artois7 said:
Hi all,
I was asked to look at a Galaxy Note 10.1 GT-N8000 by a colleague. It had been upgraded to 4.4.2, all was fine for a few days until it crashed. It's now in a bootloop spinning on the Samsung screen.
I can access Download mode, but no recovery.
Download screen says:
ODIN MODE
Product Name: GT-N8000
Current Binary: Samsung Official
System Status: Official
RP SWREV: A2
I've tried multiple versions of Odin, multiple official firmwares and multiple recoverys (custom/stock). Generally I get a NAND write Start.. FAILED message for most things. One bootloader file gave me "invalid magic string", and by manually packing files to .tar.md5 format, I can get a blue download bar appear on the tablet but nothing ever happens.
Heimdall is able to read the pit file from the device, but not flash anything (unable to confirm end of file transfer)
This seems to either be failed eMMC, or the bootloader is locked and I just haven't hit the correct software yet. I've been on this for days and don't seem to be getting anywhere.. Where do I go from here? And am I correct in thinking that I cannot access ADB from download mode; the device would need to boot to enable USB debugging?
Thanks in advance.
Click to expand...
Click to collapse
I found the solutions from another forum.. It's must repair with Z3X box flasher..
forum*gsmhosting.com/vbb/f672/n8000-logo-only-done-via-z3x-jtag-direct-emmc-step-step-inside-1959278/

Can anyone in the UK do this for me? Happy to pay obviously!

derekcfoley2 said:
Can anyone in the UK do this for me? Happy to pay obviously!
Click to expand...
Click to collapse
Local mobile repair shop that carries the tool .
Sent from my SM-N930F using XDA-Developers mobile app

SM-G920R6 Firmware Help

I want to change the firmware of my Galaxy S6 (SM-G920R6) which is Verizon LRA device. I want to Install a stock rom like the rom of SM-G920V or SM-920F or SM-G920T..
How can I do that? which firmware will be the best for it?
I want to change rom because APN refuses to work - I edited a lot of files, tried every suggestion from here & other forums - nothing helped .
So I decided to change the rom in order to enable APN edit.
So, how do I change the stock rom of my cellphone to another stock rom? The SIM is working propley after I change some settings in serivcemode (So it's not CDMA anymore, it's GSM).
Please Help ! :crying:
Edit : BTW I used this in order to root the cellphone - so maybe G920T firmware will work? CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t

My android is 5.0.2, please help.

Anyone?

This is a little off topic for the op but I really need help right now.. I rooted with CF autoroot for G920F no problem then installed TWRP 3.0.2-1 zeroflteusc also built for G920F model and in the process of trying to find a better rom as soon as I had a custom recovery, me (being a dumba**) accidentally wiped my internal storage to do a clean flash of a rom therefore deleting the only backup I had. I've only been able to find the factory binary for this device which I flashed but it had literally nothing exept for basic testing software and a simple ui to run it. It was also stuck on Android 5.0.2 but I found a compatible rom with AllianceROM v1 with update v2 flashed for the G920F but I can't find any way to update past 5.0.2!! I've been trying to find a way to update somehow for weeks but nothing is compatible with my device and I'm stuck. Would someone that has my model running on Android 5.1.1 or 6.0/.1 please install the TWRP I mentioned before and make a backup of the system, modem, efs, and boot and post it online or send it to me it would be a lot of help.

Download official Sm-G920R6 Firmware
updato.com/firmware-archive-select-model?exact=1&q=SM-G920R6

david.542569 said:
Download official Sm-G920R6 Firmware
updato.com/firmware-archive-select-model?exact=1&q=SM-G920R6
Click to expand...
Click to collapse
that doesn't have all of the available firmware versions for the device

Samsung On5 G550T1 MetroPCS REV0.4 stock OS anyone?

Hi All,
The short of a long story is that I just changed carriers and found out way late that I couldn't bring my Sprint phone to MetroPCS. So now I'm using the budget PCS On5 that came with the deal when we signed up.
I successfully loaded TRWP and then rooted however, I didn't know about FRP until it smacked me in the face. The root went fine but later SU prompted me to update the binary and when it did, it tripped factory reset protection and soft bricked my phone.
I want to reinstall stock OS on this phone but it appears that I have a software version that I haven't been able to find on the web yet. I found the stock rom for the MetroPCS On5 easily enough but it's Revision 0.0 and the box I have for the phone says REV0.4.
When I try to Odin Flash the REV0.0 version, I get SW REV CHECK FAIL DEVICE 2, BINARY 1 fail. So I guess I had the latest software on my phone and the phone thinks I'm trying to roll back using the 0.0 revsion.
My question is this, does anyone here have the stock rom for G550T1 REV0.4? Help!
If nobody does, maybe I can still fix this phone. I have a TRWP backup from the sister phone (same model same revision 0.4) that I'm using right now but I can't get back into TRWP on the soft bricked phone to recover that way to use the backup file.
Next I thought I might take the backup files and turn it into a rom and just flash that. However, with the tutorials I followed I kept running into problems. When I went to unpack the files per the tutorial, my rar software said that the file was corrupt. Maybe it is. but maybe not. It was my first time attempting to make a rom. If I can't find the software I need, could any of you Android geniuses help me get this backup into a flashable format?
I have to admit I'm daunted by the FRS in 5.0 and above. Is it defeatable? How do you root newer Android versions?
Thanks!

I did the same thing to my phone. did you get yours fixed?> if so could you provide me with the rom?

I haven't found the fix yet. Hopefully somebody will come through with a helping hand!

I finally got it figured out! So here is what i did and hopefully it will work for you.
1. I Odin flashed a good BL from the ROM REV0.0 floating around on the net. So at least I could now get into download mode.
2. Then I used Kies3 > Tools > Firmware Upgrade and Initialisation. It will ask you for your model number and then when you click ok it will ask you for a SN.
3. The trick is that Samsung doesn't put the SN that you need on the phone or the box. (personally, I couldn't find it on the phone either once I got it up and running) so go here: https://forum.xda-developers.com/android/general/root-samsung-galaxy-on5-t3435457/page46 and get a SN from post #454 and use that. (don't forget to say thanks)
4. Click Ok. Let it work, and max and relax.
Mine took about 10 minutes. Hopefully this will work for you too! Thanks XDA!

Help!
What is BL from the ROM REV0.0? I need your help, I have the MetroPCS On5 and I installed Reborn ON5 I want to go back to the MetroPCS ROM because the camera and the audio do not work and I tried to install the original ROM through Odin but it does not work I get an error. What I can do? I would like to use this method but I do not have very clear files needed.
You could help me bro, I'll thank you

[Completed] Can't update Samsung SCH-I415 - Status 7 error

Hi all,
I have problem updating my generally new Samsung SCH-I415 Stratosphere 2. I got an update package ZIP, that has been downloaded by Phone form Verizon directly. I took it to my SD card and tried to flash from stock recovery, but it has status 7 error. Phone was probably rooted before and now, on welcome screen, it shows unlocked padlock above Custom notification. I have managed to make system status to normal, but it didn't changed much - still got status 7 error. Is there any option to flash/install this update.zip on that phone? There is no firmware available for this model, no custom ROM or recovery. Please help :/
PS is there any modification to do in update.zip that I could make, to run it propely? I have found that in update-script I should remove some assert line, but when I have done that, it says ZIP signature failed.

Ok, I finally got it - it's really hard to find Odin flashable firmware to this device. Here it is: http://updato.com/firmware-archive-select-model?q=sch-i415&exact=1

Damn. I have downloaded updates from verizon and tried to flash again that firmware. Now I got "firmware upgrade encountered an error". Is there any chance to fix it/or get into recovery to factory reset?

Hi !
Thus thread isn`t for your device but it looks like it`s a workaround
https://forum.xda-developers.com/showthread.php?t=2088809
Good luck !

This model is not supported by kies unfortunatelly....

Someone HELP!!!

Hi all,
I'm having a nightmare of a time with my Galaxy S7... For some unknown reason I decided to root my phone about 2 months ago using CF Auto Root.. worked great.. This morning, was having bad lag issues, so I restarted the phone.. as soon as the Samsung logo came up, I got a red message at the top of the screen saying "Custom Binary locked by FRP".. kind of freaked out and booted the phone into Recovery mode.. wiped Cache and wiped phone (to go back to factory setting I guess).. restarted... since then, I had no boot.. it did loop for a while as I was trying to charge the phone.. but that's it.
Now, the only way the phone will power on is if I plug it into my computer in Download Mode. I am trying to flash the ROM, custom or stock, but Odin fails almost as soon as it starts the sboot.bin and the phone screen shows "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY: 1".. Also, When I try to power on the phone, it HAS to be plugged in to my computer or charger cable and it just loops with a message at the top of the screen.
I can't do anything with this phone and cant find any solutions online... please help! :crying:
PM me for images of all screens please

I had the some problem while playing with my handset I switched off OEM unlock for some reason under developer option..
Next time i reset my handset it stuck on that warning
You need to download combination file, flash it with odin, then unlock developer mode, toggle OEM unlock, than flash back your current firmware, or if you have full twrp back up restore it

JayMor81 said:
Hi all,
I'm having a nightmare of a time with my Galaxy S7... For some unknown reason I decided to root my phone about 2 months ago using CF Auto Root.. worked great.. This morning, was having bad lag issues, so I restarted the phone.. as soon as the Samsung logo came up, I got a red message at the top of the screen saying "Custom Binary locked by FRP".. kind of freaked out and booted the phone into Recovery mode.. wiped Cache and wiped phone (to go back to factory setting I guess).. restarted... since then, I had no boot.. it did loop for a while as I was trying to charge the phone.. but that's it.
Now, the only way the phone will power on is if I plug it into my computer in Download Mode. I am trying to flash the ROM, custom or stock, but Odin fails almost as soon as it starts the sboot.bin and the phone screen shows "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY: 1".. Also, When I try to power on the phone, it HAS to be plugged in to my computer or charger cable and it just loops with a message at the top of the screen.
I can't do anything with this phone and cant find any solutions online... please help! :crying:
PM me for images of all screens please
Click to expand...
Click to collapse
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.

cooltt said:
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
Click to expand...
Click to collapse
Dammit.. I tried to put as much detail as possible in there lol.. obviously I forgot some.. My mistake the Galaxy s7 that I am using is a Rogers Mobile (Canada) SM-G930W8. As for not signing out before modification, omfg, that makes perfect sense.. didn't even think of doing that before rooting.. I appreciate the help!! I will give this a go and see what outcome I get.. Thanks!

[/COLOR]That was nice of you to respond so helpfully, despite you having seen the scenario posted over and over.
cooltt said:
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
Click to expand...
Click to collapse

Can't make or receive calls
Please I need help my I rooted my S7 (flat) flashed the original OS with odin Installed Twrp flashed Andriod 9 and since then I can't make or receive calls wifi seems fine. Someone please come to my rescue:crying:

Cesilina said:
Please I need help my I rooted my S7 (flat) flashed the original OS with odin Installed Twrp flashed Andriod 9 and since then I can't make or receive calls wifi seems fine. Someone please come to my rescue:crying:
Click to expand...
Click to collapse
The S7 didn't receive Android 9 so the ROM is a custom one. Any issues with custom ROM's should be asked on the ROM thread itself where you got the ROM from. It's quite normal for custom ROM'S to have bugs.
You can try flashing the ROM (Android 9 Pie) again to see if it works. If not there are several different A9 ROM's to choose from.

cooltt said:
The S7 didn't receive Android 9 so the ROM is a custom one. Any issues with custom ROM's should be asked on the ROM thread itself where you got the ROM from. It's quite normal for custom ROM'S to have bugs.
You can try flashing the ROM (Android 9 Pie) again to see if it works. If not there are several different A9 ROM's to choose from.
Click to expand...
Click to collapse
Thank you for reply. I have tried atleast 4 different custom ROMs but to avail

Cesilina said:
Thank you for reply. I have tried atleast 4 different custom ROMs but to avail
Click to expand...
Click to collapse
Do you still have an imei number listed in settings?

Can't make or receive calls
cooltt said:
Do you still have an imei number listed in settings?
Click to expand...
Click to collapse
Yes please I still have an IMEI number