Hi guys i have what i can only describe as a big tablet (i believe it to be some sort of adverting screen running android kitkat) i have been looking for days for info on the device but have come up blank. I would like to be able to install new firmware as the one on it is very limited. all info i have is listed any advice on Firmware and how to install TWRP as device has no buttons bar 2 Power Button and Reset Button. device has 3 usb ports and i have keyboard installed.
elonex
AD181-SDCT-BBW1-A-V1
RK3188
ROCKCHIP
RK30SDK
RK30BOARD
ARM [email protected]
REVISION - R3PO
BUILD ID - CX-WF185IT-Z05-18.5-B1.02.20170412
BUILD/KOT49H
DALVIK 1.6.0
KERNEL VERSON 3.0.36+(ENG.ROOT.20151104.193426)
KERNEL ARCHITECTURE ARMV71
API LEVEL 19
OPEN GL ES 2.0
samsung 622
KLN8GIWEPD-B031
S4CRDMGXN
SKhynix
H5TQ2G83GFR
RDC 627V
DWMN0916LH1
Z05-V4.1 8G+1G
18.5/21.5-5V
04.600.ELC.0195
CXP02016376 KBL
ADW160851056
Im currently stuck on android screen lol any help would be greatly appreciated
Hi everyone.
I bought this receiver last month and I have a problem with external modem – unit descriptions below:
Brand Name: ROADRISION
Display Size: 7"
TF/Micro SD Slot: 2
ROM: 32G
Model Name: RRA7844A
RAM: 4G
Operating System: Android 8.0
Screen: 1024*600 Capacitive touch screen
CPU: Coretex A53 Octa core px5
I can't connect any modem. I don't want use connection thru WI-FI from my phone - if radio have wi-fi cable to connect modem I want to use it.
Does anyone have this receiver and maybe knows how to connect modem?
Maybe someone can help me to root this radio or can tell me did I can downgrade to android 6.0.1 - but I can't find ROM for this model.
maybe anyone knows how to get into recovery mode?
I took some Pictures of radio and system info:
https : //pl. pinterest. com / bik0408 / roadrision /
For any feedback. THX
I have a Android Box (MBOX) with a Realtek RTD1295 Chip which supports HDMI Input and runs a Android 6 (Probably Tablet version). I was wondering if someone knows if I can, and how, install a Custom Android TV Image so I can use the Android SDK TVInputFramework (TIF).
I have a Lenovo Thinkpad Helix (First Gen)
Specs:
Intel I5-3337U (Intel HD 4000)
4GB Ram
128GB SSD
I'm wondering which OS/File I should try? Ive tried the most recent IPTS Build (Bliss-v11.10--OFFICIAL-20191215-1101_x86_64_k-k4.19.24-ax86-ipts2_m-18.3.5-pie-x86-llvm80_ld-2.4.99-ma-p_dg-pie-x86_dh-undefined_gms.iso) And once I get to "Detecting Android....... Android found at sda1" and after that it freezes. Booting with no hardware acceleration boots but it has no support for anything. Is there a build or firmware that supports this tablet?
Any help would be appreciated!
I found that Bliss-v12.1-Bliss-OS-OFFICIAL-20191205-201912052127_k-undefined_m-q-x86_ld-q-x86_dg-q-x86_dh-q-x86.iso is the version that works best for this machine. If you have a 3rd Gen intel id say try that.
I have an old Tablet PC with an Allwinner A23 Quad-Core, 1GB RAM and 1GB, 5GB more storage, What's the maximum unofficial Android update that I can get?
I attached the CPU-Z screenshots for more info.
Forget it.
Impossible?
I think so. This because computer's system resources are too low where it doesn't matter whether Android should get run via emulator or via dual boot.
This is an android tablet, it don't use emulator or dual boot
FYI:
How I can install android 6 in my tablet?
I discovered that my tablet has an Allwinner A33
santi._.cr said:
I discovered that my tablet has an Allwinner A33
Click to expand...
Click to collapse
This SoC features a Quad-Core Cortex-A7 ARM CPU, and a Mali400 MP2 GPU from ARM. That's good.
The problem in your case is the little available RAM.
santi._.cr said:
How I can install android 6 in my tablet?
Click to expand...
Click to collapse
Find a Custom Recovery suitable to tablet, if found find a Custom Android 6 ROM suitable to tablet. If both found, flash the Custom Recovery and if successful flash the Custom Android 6 ROM via Custom Recovery.
Con you help me find, I'm a newbie, I want Android 5, 6 or 7, any that you find.
DIY
?