Hi everyone, is there any way to set "turn off screen" function on steering wheel? I attached photo where I show what function I want to set.
I don't know anything about your head unit, but can't you just make it inject a KeyEvent of KEYCODE_SLEEP (223)?
I don't know how to do it. Can you help me?
Related
hey :]
please tell me theres some line of code somewhere where i can simply put some # in and deactivate the right mouse button this way?
im running a Minix X7 on my TV controlling it via a Logitech TK820 and External Keyboard Helper Pro - everything works fine, except that sometimes I accidently tap on the right/down half of the touchpad and go "back" since that seems to be the default binding for "hardware mouse right button click".
With Tincores Keymapper i can bind/map the *hardware right click* to a left click, so it is possible somehow - but i need External Keyboard Helper Pro ;/ Either bind the right mouse click to a left or deactivating it at all would be fine!
Searched though forums and .kl-files, but all I could find theres is the binding/mapping of the keyboard-keys, not the *mouse buttons*
Thank you very much in advance!
cheers,
Clemens
Dear XDA
I need a little help, I've purchased exactly this thing
http://g01.s.alicdn.com/kf/HTB1KCCWGFXXXXXLapXXq6xXFXXXH/220263796/HTB1KCCWGFXXXXXLapXXq6xXFXXXH.jpg
And it acts as a gamepad, autoshutter or mouse - it works quite well with one exception - the button that should stand for "click" with arrow (aka touching in arrow point) does not work.
I have control over volume, i can scroll the pointer (arrow) and i can go back (<- ) what I cannot do is to just simply click and I'm wondering if there's a way to remap the button on this gamepad to act as google cardboard clicker.
Can You lend me a hand with this one?
Hey guys. About a year ago I installed a Teyes T-Pro in my '14 Focus ST, and while its better than the ST1 radio I had with a 4" screen, I hate this thing. An entire 1 inch vertical segment of the screen does not work, the screen does not turn on when the ambient temp is below 50 degrees F (until it heats itself up, takes like 25+ min in winter), subwoofer pre out doesn't work, and many many more stupid issues.
The reason I'm posting, though, is I would like to remap one of the steering wheel keys. The built in app to do this, of course, does nothing. Apps like button remapper also do nothing, probably bc the buttons function over CAN-Bus. When I press the microphone button on my steering wheel it opens an app called "car-info" which also does almost nothing. I am wondering if there is a way to have another app (google assistant) open right after this "Car-info" app opens. Also, if anyone has any experience with the T-Pro any input would be very appreciated. TEYES Tech support never responded to my multiple messages, of course, and I can't seem to find a head unit that sucks less and I don't want to roll the dice on another Teyes product.
Any input would be greatly appreciated...
Thanks a ton
Anyone got anything?
perrymike15 said:
Anyone got anything?
Click to expand...
Click to collapse
Contact TEYESAustralia, Hopefully they can give you a solution
What kind of car do you have (year, make, model, etc)?
Did you install the T-Pro yourself?
Do you have schematics for your car? If so, how do your steering wheel buttons connect to the old head unit?
Can you tell from the schematics if the buttons are resistive or not? Only resistive buttons can be remapped.
If your SWC are resistive, then you should be able to directly connect those buttons to the T-Pro inputs...I believe they are labelled key1 and key2. If the SWC are not resistive, I don't believe there is anything you can do about remapping them.
I've installed MTCE_GS_V3.01_3 head unit, and while steering wheel buttons work fine, the central panel buttons are no go.
I'm certain I've connected every cable that was connected on the original installation.
I've seen some suggestions on youtube to reset the panel button list, and then choose key study to add all buttons anew, however that does not help.
Right now Can bus type is set to 55 GM Simple, and that's probably the only one that works with steering wheel buttons.
I've tried changing knob type and other settings to no avail - I do full restart after the change, but when in key study no button press makes a difference.
Are there any suggestions what other settings should I try changing, or is there a way to check if a buttons press sends any signal at all?
You seem to be mixing/confusing steering wheel key assignment with the touch key assignments. These are two very different things. Canbus has nothing to do with the touch keys.
There is a touch sound setting that will cause the unit to beep every time one of the touch keys are touched. Please have a look at my instructional tutorial on how to set the touch keys:
How to reset the touch buttons instructional
This thread is not asking how to reset the touch buttons down the side of the panel screen. First go to Settings... Car.. Factory settings.. password 126 Then touch Key study category at the top Next Touch Key Study First the system will want...
forum.xda-developers.com
Hope this helps.
jlbooth said:
You seem to be mixing/confusing steering wheel key assignment with the touch key assignments. These are two very different things. Canbus has nothing to do with the touch keys.
There is a touch sound setting that will cause the unit to beep every time one of the touch keys are touched. Please have a look at my instructional tutorial on how to set the touch keys:
How to reset the touch buttons instructional
This thread is not asking how to reset the touch buttons down the side of the panel screen. First go to Settings... Car.. Factory settings.. password 126 Then touch Key study category at the top Next Touch Key Study First the system will want...
forum.xda-developers.com
Hope this helps.
Click to expand...
Click to collapse
I'm not sure we're talking about the same things, correct me if I'm wrong.
I'm talking about these buttons basically:
https://a.allegroimg.com/original/033b49/7f4f25564315ad7abd6afb6da117/PANEL-RADIA-OPEL-INSIGNIA-CD300-13273252
To my understanding (until now) they should be configured using Panel key study?
elmmm said:
I'm not sure we're talking about the same things, correct me if I'm wrong.
I'm talking about these buttons basically:
https://a.allegroimg.com/original/033b49/7f4f25564315ad7abd6afb6da117/PANEL-RADIA-OPEL-INSIGNIA-CD300-13273252
To my understanding (until now) they should be configured using Panel key study?
Click to expand...
Click to collapse
That looks like the control panel for the original radio.... and probably connected DIRECTLY to the original radio. Unless they operate through can bus, I don't think you can configure those.
I've seen them working on YouTube videos and such.
Agree with @Bob_Sanders on this. I was under the impression that it was just touch buttons off to one side of the head unit screen like many of these head units.
I suggest reaching out to the manufacturer of the radio with your question regarding the button panel.
elmmm said:
I've seen them working on YouTube videos and such.
Click to expand...
Click to collapse
Then it's possibly connected through can bus and you MIGHT get it working if you connect up your Key1 and Key2 wires and try the key study again.
I'm not sure if you have a can bus box on there already. If you do I'm not sure if you can run the box AND the key1/2 wiring at the same time. Try it though.
Bob_Sanders said:
Then it's possibly connected through can bus and you MIGHT get it working if you connect up your Key1 and Key2 wires and try the key study again.
I'm not sure if you have a can bus box on there already. If you do I'm not sure if you can run the box AND the key1/2 wiring at the same time. Try it though.
Click to expand...
Click to collapse
Can you clarify please what do you mean by "the box"?
Hello everyone.
I could not find a MTCE section and was unsure where to post, so I am posting this to the MTCD/MTCB/Android Head-Units threads. Sorry mods, please close or merge as you see fit.
I have a PX5 running Android 10. MCU version is MTCE_HXD_V3.62e_1 and would like to assign a phisical button (preferably a steering wheel button) to open TorquePro.
I found the remap function on factory options, but there are two problems with this:
First, only the volume buttons on my steering wheel show up on the buttons list, and not the "mode" button I wanted to use for this. Maybe this has something to do with CAN-Bus configurations? Or should I reset and map the buttons manually in order for them to show up? I think they all work. This "mode" button I don't use currently cycles between radio, media player and DVD and the skip track buttons also function as supposed, although being absent from the list.
Second, even if I forget about the steering wheel and try to map it to one of the buttons on the unit itself (like the DVD button I don't use) I can only map preset functions, like navigation, DVD, mute, etc. and not individual apps.
So I need either a third-party app that allows me to map Torque to a button, or a way to add torque to the mapable funcions on the factory options.
Any thougts on how to do this?
BTW, I tried MTCDtools but it doesn't seem to work. All I get from it is a "app keeps crashing" error message.
Thank you all!
Yes mtcE is an mtcD type. So you're in the right place.
All right, one step in the right direction. Yet MTCDtools didn't work. I installed the APK and it doesn't even open, all I get is a crashed app error message everytime I try starting it...
Any ideas what is going wrong here?
Have you tried the modified version 1.10, from AirOne70? #493
Not yet, just the one from f1x's GitHub. Will try it today. Thank you.
Pavel-71 said:
Have you tried the modified version 1.10, from AirOne70? #493
Click to expand...
Click to collapse
I have tried it, and it worked, so thank you!
Although it was just a partial success. I have a "source" button on my steering wheem which is used to cycle through radio/DVD/media player/etc. and managed to make it open Torque, like I wanted. The problem is that it also mantains the original function, so it launches Torque AND changes the media source on the same time.
I guess I need to "disconnect" the original functio. Any ideas on how to do this?
Thank you!
DC69 said:
I have tried it, and it worked, so thank you!
Although it was just a partial success. I have a "source" button on my steering wheem which is used to cycle through radio/DVD/media player/etc. and managed to make it open Torque, like I wanted. The problem is that it also mantains the original function, so it launches Torque AND changes the media source on the same time.
I guess I need to "disconnect" the original functio. Any ideas on how to do this?
Thank you!
Click to expand...
Click to collapse
Unfortunately, I can't help you with that, try reading the thread, maybe someone has already solved it.