Hi guys, I bought a Motorola Atrix 2 AT&T Unlocked and I have problems when I try to connect to the internet.
I can make/receive phone calls and sms, but no data. I'm from Venezuela and the carrier that I use has HSDPA 850 (It works fine with 3G), so it seems not to be the problem because atrix 2 is a "International Phone".
I tried everything, changed manually APNs and still I can't get data connection.
Toogled on/off radio and still no data.
Searching in phone info I found this:
Data
State_ DcInactiveState disconnected with last try at 7:59pm
Do you have any suggestion? Any help I'll appretiate.
gerardoo23 said:
Hi guys, I bought a Motorola Atrix 2 AT&T Unlocked and I have problems when I try to connect to the internet.
I can make/receive phone calls and sms, but no data. I'm from Venezuela and the carrier that I use has HSDPA 850 (It works fine with 3G), so it seems not to be the problem because atrix 2 is a "International Phone".
I tried everything, changed manually APNs and still I can't get data connection.
Toogled on/off radio and still no data.
Searching in phone info I found this:
Data
State_ DcInactiveState disconnected with last try at 7:59pm
Do you have any suggestion? Any help I'll appretiate.
Click to expand...
Click to collapse
Quick question do you have the me or the mb model?
Atrix 2 4G MB865
This question belongs in the general section not the developer section.
I will have the mods move this.
gerardoo23 said:
Hi guys, I bought a Motorola Atrix 2 AT&T Unlocked and I have problems when I try to connect to the internet.
I can make/receive phone calls and sms, but no data. I'm from Venezuela and the carrier that I use has HSDPA 850 (It works fine with 3G), so it seems not to be the problem because atrix 2 is a "International Phone".
I tried everything, changed manually APNs and still I can't get data connection.
Toogled on/off radio and still no data.
Searching in phone info I found this:
Data
State_ DcInactiveState disconnected with last try at 7:59pm
Do you have any suggestion? Any help I'll appretiate.
Click to expand...
Click to collapse
It is the Access Point.
Please insert your sim card in a different phone, take note of the access points, and then put the sim back into the Atrix 2.
It happens many times, that the Atrix 2 is not able to see the Access Points configured inside the sim card.
Please let us know if that solves the problem.
gerardoo23 said:
Hi guys, I bought a Motorola Atrix 2 AT&T Unlocked and I have problems when I try to connect to the internet.
I can make/receive phone calls and sms, but no data. I'm from Venezuela and the carrier that I use has HSDPA 850 (It works fine with 3G), so it seems not to be the problem because atrix 2 is a "International Phone".
I tried everything, changed manually APNs and still I can't get data connection.
Toogled on/off radio and still no data.
Searching in phone info I found this:
Data
State_ DcInactiveState disconnected with last try at 7:59pm
Do you have any suggestion? Any help I'll appretiate.
Click to expand...
Click to collapse
Hola gerardoo23 yo tengo un Mb865 de AT &T liberado por IMEI, cuando lo tuve lo use con Movilnet y trabajo bien: voz, Sms, mms y datos, con Digitel igual salvo que no se conectaba al 3g, con Movistar es otra historia simplemente no te trabajaran los datos hasta que hagas un reporte al 411 o mejor envía un e-mail [email protected] con tus datos y plantea tu problema de conexión puedes agregar que ya varias personas con este equipo han presentado la falla y anexo esta dirección de un foro en el cual un grupo de usuarios atrix el año pasado dieron con la falla, ya movistar conoce el foro solo refierelos y en 24 horas tendrás tu problema resuelto (no puedo dejarte el link porque soy noob) ----> busca un foro llamado "Grupo Android" busca en consultas atrix "problemas de conectividad"
Suerte
MrAlcoholico said:
Hola gerardoo23 yo tengo un Mb865 de AT &T liberado por IMEI, cuando lo tuve lo use con Movilnet y trabajo bien: voz, Sms, mms y datos, con Digitel igual salvo que no se conectaba al 3g, con Movistar es otra historia simplemente no te trabajaran los datos hasta que hagas un reporte al 411 o mejor envía un e-mail [email protected] con tus datos y plantea tu problema de conexión puedes agregar que ya varias personas con este equipo han presentado la falla y anexo esta dirección de un foro en el cual un grupo de usuarios atrix el año pasado dieron con la falla, ya movistar conoce el foro solo refierelos y en 24 horas tendrás tu problema resuelto (no puedo dejarte el link porque soy noob) ----> busca un foro llamado "Grupo Android" busca en consultas atrix "problemas de conectividad"
Suerte
Click to expand...
Click to collapse
Tu hablas ingles? Puede publicar una traducción en Inglés, por favor?
This is an English only forum so use Google translate
farshad525hou said:
Originally Posted by MrAlcoholico
Hola gerardoo23 yo tengo un Mb865 de AT &T
liberado por IMEI, cuando lo tuve lo use con Movilnet
y trabajo bien: voz, Sms, mms y datos, con Digitel
igual salvo que no se conectaba al 3g, con Movistar es
otra historia simplemente no te trabajaran los datos
hasta que hagas un reporte al 411 o mejor envía un e-
mail [email protected] con tus datos y
plantea tu problema de conexión puedes agregar que
ya varias personas con este equipo han presentado la
falla y anexo esta dirección de un foro en el cual un
grupo de usuarios atrix el año pasado dieron con la
falla, ya movistar conoce el foro solo refierelos y en
24 horas tendrás tu problema resuelto (no puedo
dejarte el link porque soy noob) ----> busca un foro
llamado "Grupo Android" busca en consultas atrix
"problemas de conectividad"
Suerte
Tu hablas ingles? Puede publicar una traducción en Inglés, por favor?
This is an English only forum so use Google translate
Click to expand...
Click to collapse
Hi, of course man Im sorry I should post in English.
"HI Gerardo I got an Atrix2 from at&t unlocked, when I got it I used my Movilnet simcard and work perfect sms, voice an data (3g), I used my Digitel simcard and also work sms, data and voice but the hsdpa or 3g dosnt work with this phone, with my Movistar simcard its another history... sms and voice works perfectly but data in Movistar for atrix and atrix 2 have issues (Movistar block the data for those devices noone know why) so in order to use yoyr atrix 2 with movistar you have to call 411 and report or send and email to [email protected] in this email you have to indicate name phone, number and imei/model of the phone them stablish your problem you can added (like I did) this information : last year some movistar atrix users have data conection problems they gather at this forum and they got same problem and Movistar fixed the issue[I cant post links because Im nwebie] but you can found it by google search " grupo android problema de conectividad" www.grupoandroid.com/topic/25752-problema-de-conectividad-de-datos/", they will fix your problem in 24hours (like me). Good luck
*Yes, here in Venezuela we still are in 3g... and its crappy
*Sorry for the Spanish post
Greetings.
I am new to this community, but thanks to Catuva21 and KingOfMezi, I have been able to explore the world of roms. I installed rom unofficial, and, from Nougat, migrate to Oreo (Thanks to the above-mentioned characters), but, thanks to another tutorial, I was able to reinstall a Rom Stock factory, with Factory Recovery, and, close the Bootloader .
As I did, with these steps:
1. I have Oreo installed, move from Nougat to Oreo with the tutorials of this community.
2. As explained in this forum: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279, with Firmware Finder, download the firmware of my computer ( previously I had changed from RNE-L23 to RNE-L21), but I wanted to go back to my original RNE-L23 firmware, as it says in the tutorial, the four files put them in a folder called HWOTA inside the SD. Before that he had the Bootloader open, and, the TWRP of catuva21 u other.
3. Restart in recovery mode, and, I look for the HWOTA folder, and I can do the following:
- Press WIPE, then ADVANCE WIPE
- Mark: Dalvik, cache, data, internal storage, system
- IMPORTANT!: Do not mark "micro sdcard".
- Once you have marked, slide the "swipe to wipe" arrow to clear it.
- Go back to the main sale, press INSTALL
- Press SELECT STORAGE
- Switch to Micro SDCard to find the HWOTA folder and install the file HuRUpdater_0.3.zip.
When it has finished installing I recommend restarting in recovery (it will be done in the factory), and, clean cache and wipe, then restart and configure the machine from scratch, this option if you do not want to close bootloader.
4. In case of seeking to close the bootloader (you must have installed the drivers on the computer) and with the code through adb fastboot perform it, this will restart the computer and be formatted, everything will be deleted.
Then it will restart and again be ready to configure it as newly purchased.
Or only
- Press SELECT STORAGE
- Switch to Micro SDCard to find the HWOTA folder and install the file HuRUpdater_0.3.zip
This updates the system, but does not eliminate installed applications (that's what happened to me the first time)
With this option it remains with the Recovery Stock, in rom Stock, but the open bootloader.
I personally use the two options, and, now I have the factory recovery and the factory rom, the system detects me the computer without root (when entering the Huawei ID), and, is ready if you want to sell the equipment, or if only You want the equipment to have an original installation.
Thank you very much for your attention.
It's my first post, also everything was translated by google translate, my original language is Spanish.
Any questions or comments will gladly attend.
I must emphasize that everything is done in a Huawei Mate 10 Lite RNE-L23, bought in Colombia, the cust is C605.
Also, I followed a tutorial on the internet and now I have two simcards (Movistar and Claro) and the Micro SD.
Thanks Man for this thread. i was able to save my dying phone thanks to this method. created this account just to thank you!
gaduarte7 said:
Greetings.
I am new to this community, but thanks to Catuva21 and KingOfMezi, I have been able to explore the world of roms. I installed rom unofficial, and, from Nougat, migrate to Oreo (Thanks to the above-mentioned characters), but, thanks to another tutorial, I was able to reinstall a Rom Stock factory, with Factory Recovery, and, close the Bootloader .
As I did, with these steps:
1. I have Oreo installed, move from Nougat to Oreo with the tutorials of this community.
2. As explained in this forum: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279, with Firmware Finder, download the firmware of my computer ( previously I had changed from RNE-L23 to RNE-L21), but I wanted to go back to my original RNE-L23 firmware, as it says in the tutorial, the four files put them in a folder called HWOTA inside the SD. Before that he had the Bootloader open, and, the TWRP of catuva21 u other.
3. Restart in recovery mode, and, I look for the HWOTA folder, and I can do the following:
- Press WIPE, then ADVANCE WIPE
- Mark: Dalvik, cache, data, internal storage, system
- IMPORTANT!: Do not mark "micro sdcard".
- Once you have marked, slide the "swipe to wipe" arrow to clear it.
- Go back to the main sale, press INSTALL
- Press SELECT STORAGE
- Switch to Micro SDCard to find the HWOTA folder and install the file HuRUpdater_0.3.zip.
When it has finished installing I recommend restarting in recovery (it will be done in the factory), and, clean cache and wipe, then restart and configure the machine from scratch, this option if you do not want to close bootloader.
4. In case of seeking to close the bootloader (you must have installed the drivers on the computer) and with the code through adb fastboot perform it, this will restart the computer and be formatted, everything will be deleted.
Then it will restart and again be ready to configure it as newly purchased.
Or only
- Press SELECT STORAGE
- Switch to Micro SDCard to find the HWOTA folder and install the file HuRUpdater_0.3.zip
This updates the system, but does not eliminate installed applications (that's what happened to me the first time)
With this option it remains with the Recovery Stock, in rom Stock, but the open bootloader.
I personally use the two options, and, now I have the factory recovery and the factory rom, the system detects me the computer without root (when entering the Huawei ID), and, is ready if you want to sell the equipment, or if only You want the equipment to have an original installation.
Thank you very much for your attention.
It's my first post, also everything was translated by google translate, my original language is Spanish.
Any questions or comments will gladly attend.
I must emphasize that everything is done in a Huawei Mate 10 Lite RNE-L23, bought in Colombia, the cust is C605.
Also, I followed a tutorial on the internet and now I have two simcards (Movistar and Claro) and the Micro SD.
Click to expand...
Click to collapse
Hello
but by this method, the bootloader is not written LOCK but RELOCKED?
I also found a solution for the bootloader to be LOCK, but only in 5.1 with OTA update.
Te escribo en español para que sea más fácil para los dos jaja tengo dos preguntas es necesario el oem info original o con el hurupdater basta? Y la otra en México la compañía Telcel tiene una ROM de oreo yo estoy en rne-l21 podría cambiar con los archivos zip solamente? Ojalá puedas ayudar!
Chisetdel31260 said:
Hello
but by this method, the bootloader is not written LOCK but RELOCKED?
I also found a solution for the bootloader to be LOCK, but only in 5.1 with OTA update.
Click to expand...
Click to collapse
You are absolutely right, Relock appears; but you will not have the bootloader with options, just enter the system immediately, and, the recovery Stock.
I'm interested in the other method, could you tell me where it's published?
ciceorigel said:
Te escribo en español para que sea más fácil para los dos jaja tengo dos preguntas es necesario el oem info original o con el hurupdater basta? Y la otra en México la compañía Telcel tiene una ROM de oreo yo estoy en rne-l21 podría cambiar con los archivos zip solamente? Ojalá puedas ayudar!
Click to expand...
Click to collapse
Hola,
1. No es necesario los archivos oeminfo. Solamente los tres firmware descargados con el Firmware Updater, el que desees. En el proceso te salen en el TWRP dos errores (en rojo) pero el proceso continua y no hay fallos. Indispensable renombrar los archivos como aparecen explicados en el link.
2. He probado descargando los archivos C185, C605 y C432 (Medio Este, Colombia o latinoamerica no estoy seguro, y, Europa respectivamente), funcionan super bien, Pero solo con el C605 (Mi equipo es un RNE-L23C605) y con este no se detecta root, con el C432 si me identifica Root, asumo que es por que no es el original del equipo, solo lo cambie.
Te recomiendo, si el equipo es RNE-L21, descarga el Cust libre que poseías antes de iniciar todo, es decir buscar firmware RNE-L21C432 o RNE-L21C185
A mi me ha pasado:
Con el Firmware RNE-L21C185 y RNE-L21C432 no aparecía la opción de encender la pantalla cuando se reciben mensajes o alertas, pero si en la pantalla cuando esta activo el wifi también se ve la señal de operador (2G, 3G 4G o LTE que tengamos al lado de las barras de intensidad), en cambio con el C605 no me aperece la señal (2G, 3G, 4G o LTE, las barras de intensidad si), pero si la opción de encender pantalla al recibir mensajes o avisos, así que opte por dejar este ultimo.
Hello,
1. Oeminfo files are not necessary. Only the three firmware downloaded with the Firmware Updater, whichever you want. In the process you get two errors in the TWRP (in red) but the process continues and there are no failures. It is essential to rename the files as they are explained in the link.
2. I have tried downloading the files C185, C605 and C432 (Middle East, Colombia or Latin America I'm not sure, and, Europe respectively), work super well, but only with the C605 (My computer is an RNE-L23C605) and with this no root is detected, with the C432 if Root identifies me, I assume it is because it is not the original of the device, just change it.
I recommend, if the equipment is RNE-L21, download the free Cust you owned before starting everything, that is, search for firmware RNE-L21C432 or RNE-L21C185
It has happened to me:
With the Firmware RNE-L21C185 and RNE-L21C432 did not appear the option to turn on the screen when messages or alerts are received, but if on the screen when the wifi is active you can also see the operator signal (2G, 3G 4G or LTE that we have next to the intensity bars), on the other hand with the C605 I do not see the signal (2G, 3G, 4G or LTE, intensity bars if), but the option to turn on the screen when receiving messages or warnings, as well that chooses to leave the latter.
Folder name to be HWOTA is not necessary
gaduarte7 said:
You are absolutely right, Relock appears; but you will not have the bootloader with options, just enter the system immediately, and, the recovery Stock.
I'm interested in the other method, could you tell me where it's published?
Click to expand...
Click to collapse
You can put HuRupdater and 3 firmware files in a folder with any name on sd card and flash. Folder name must be HWOTA is not necessary.
Am i right?
gaduarte7 said:
Hola,
1. No es necesario los archivos oeminfo. Solamente los tres firmware descargados con el Firmware Updater, el que desees. En el proceso te salen en el TWRP dos errores (en rojo) pero el proceso continua y no hay fallos. Indispensable renombrar los archivos como aparecen explicados en el link.
2. He probado descargando los archivos C185, C605 y C432 (Medio Este, Colombia o latinoamerica no estoy seguro, y, Europa respectivamente), funcionan super bien, Pero solo con el C605 (Mi equipo es un RNE-L23C605) y con este no se detecta root, con el C432 si me identifica Root, asumo que es por que no es el original del equipo, solo lo cambie.
Te recomiendo, si el equipo es RNE-L21, descarga el Cust libre que poseías antes de iniciar todo, es decir buscar firmware RNE-L21C432 o RNE-L21C185
A mi me ha pasado:
Con el Firmware RNE-L21C185 y RNE-L21C432 no aparecía la opción de encender la pantalla cuando se reciben mensajes o alertas, pero si en la pantalla cuando esta activo el wifi también se ve la señal de operador (2G, 3G 4G o LTE que tengamos al lado de las barras de intensidad), en cambio con el C605 no me aperece la señal (2G, 3G, 4G o LTE, las barras de intensidad si), pero si la opción de encender pantalla al recibir mensajes o avisos, así que opte por dejar este ultimo.
Click to expand...
Click to collapse
Muchas gracias, agradezco la respuesta, podrías postear los links de donde descargaste tu firmware C605? He encontrado un error con los zip que he descargado y en todos obtengo el Error with update.zip, alguna idea?
Gracias de antemano, Saludos!
ciceorigel said:
Muchas gracias, agradezco la respuesta, podrías postear los links de donde descargaste tu firmware C605? He encontrado un error con los zip que he descargado y en todos obtengo el Error with update.zip, alguna idea?
Gracias de antemano, Saludos!
Click to expand...
Click to collapse
Archives
https://forum.xda-developers.com/ma...eo-latin-america-finally-dual-single-t3788054
maniwaraich said:
You can put HuRupdater and 3 firmware files in a folder with any name on sd card and flash. Folder name must be HWOTA is not necessary.
Am i right?
Click to expand...
Click to collapse
Hello greetings. I have only tried the folder renamed, as they recommend in all the post I have visited. I do not know if it works with another folder name.
Muchas gracias!
gaduarte7 said:
Archives
https://forum.xda-developers.com/ma...eo-latin-america-finally-dual-single-t3788054
Click to expand...
Click to collapse
de verdad que agradezco la ayuda, quisiera saber si a ti sí te cambia el modelo ya que después de flashear me sigue apareciendo como L21
ciceorigel said:
de verdad que agradezco la ayuda, quisiera saber si a ti sí te cambia el modelo ya que después de flashear me sigue apareciendo como L21
Click to expand...
Click to collapse
No me cambia el modelo, sigue como el RNE-L23 con los firmware de los RNE-L21.
I do not change the model, it continues as the RNE-L23 with the firmware of the RNE-L21.
Entiendo. Mi problema es que le hice rebrand al teléfono y ahora que estoy en Oreo no sé si es posible que me compartas tu oeminfo para flashearlo en mi teléfono, ya que el único oeminfo que he encontrado para l23 es el de Nougat. Espero puedas ayudarme. Infinitamente agradecido
ciceorigel said:
Entiendo. Mi problema es que le hice rebrand al teléfono y ahora que estoy en Oreo no sé si es posible que me compartas tu oeminfo para flashearlo en mi teléfono, ya que el único oeminfo que he encontrado para l23 es el de Nougat. Espero puedas ayudarme. Infinitamente agradecido
Click to expand...
Click to collapse
La verdad nunca lo he hecho, ni se como hacerlo, buscare la forma de realizarlo, dame tiempo.
The truth I've never done, I do not know how to do it, I'll find a way to do it, give me time.
gaduarte7 said:
La verdad nunca lo he hecho, ni se como hacerlo, buscare la forma de realizarlo, dame tiempo.
Click to expand...
Click to collapse
agradezco mucho la atención. eres grande!
ciceorigel said:
agradezco mucho la atención. eres grande!
Click to expand...
Click to collapse
Listo, tuve que volver a abrir el Bootloader, instalar TWRP de Catuva21, e instalar Magisk-v16.0.
pero aca tienes los archivos:
https://mega.nz/#F!7vZziRZa!uJPuAdzLgvbMypMlpcZ5xg
El oeminfo son lo mismo, solo que use dos programas diferentes para extraerlo (uno esta comprimido, por ello es mas pequeño), y, tambien el custom.bin, no se si lo necesitas.
Ok, I had to reopen the Bootloader, install Catuva21 TWRP, and install Magisk-v16.0.
but here you have the files:
https://mega.nz/#F!7vZziRZa!uJPuAdzLgvbMypMlpcZ5xg
The oeminfo are the same, only that it uses two different programs to extract it (one is compressed, for that reason it is smaller), and, also the custom.bin, I do not know if you need it.
gaduarte7 said:
Listo, tuve que volver a abrir el Bootloader, instalar TWRP de Catuva21, e instalar Magisk-v16.0.
pero aca tienes los archivos:
https://mega.nz/#F!7vZziRZa!uJPuAdzLgvbMypMlpcZ5xg
El oeminfo son lo mismo, solo que use dos programas diferentes para extraerlo (uno esta comprimido, por ello es mas pequeño), y, tambien el custom.bin, no se si lo necesitas.
Click to expand...
Click to collapse
No tienes idea de cuánto lo agradezco, una disculpa por la molestia pero el trato, wow no lo esperaba.
Alguna recomendación para cambiarlo? No he podido encontrar un tutorial sobre cómo restablecer el archivo, por lo que he visto sí que sabes lo que haces, ojalá pudieses ayudarme
ciceorigel said:
No tienes idea de cuánto lo agradezco, una disculpa por la molestia pero el trato, wow no lo esperaba.
Alguna recomendación para cambiarlo? No he podido encontrar un tutorial sobre cómo restablecer el archivo, por lo que he visto sí que sabes lo que haces, ojalá pudieses ayudarme
Click to expand...
Click to collapse
Usa el archivo (es pesado):
https://androidfilehost.com/?fid=529152257862664925 (es para Mate 8, pero sirve para desbloquear, unlock, relock, root, backup, etc)
1. Descomprime el archivo .zip
2. Copia los archivos (que te envié, no comprimidos) en la carpeta Restore-oeminfo-custombin del archivo que descargaste y descomprimiste (SRKToolHuawei-Lod-Chong-V2.0).
3. En la carpeta (SRKToolHuawei-Lod-Chong-V2.0) ejecuta principal el archivo SRKToolHuawei-Lod-Chong-V2.0-20161002.exe, se abre una ventana, esperar a que cargue.
4. Dale click en continuar (si te sale la ventana)
5. En Main Menu aparece la opción: 6. Restore.
6. Esa es la opcion que te sirve, coloca el numero 6 y sigue las intrucciones.
7. Indispensable ser root, y que lo tengas en permitir todo (En las opciones Super usuario de SU o Magisk, el que uses), de lo contrario al ejecutar, te aparece acceso denegado (todo en ingles).
8. Indispensable tener habilitado opciones de desarrollador, depuracion usb activa y permitir depuracion adb en modo solo carga.
9. Ejecuta acciones, deja que el programa termine, y reiniciara el equipo.
Listo.
Espero que con esto te halla ayudado, me avisas alguna cosa.
El proceso es corto realmente, demorada la descarga del archivo, listo.
------------------------------------------------------------
Use the file (it is heavy):
https://androidfilehost.com/?fid=529152257862664925 (it's for Mate 8, but it's used to unlock, unlock, relock, root, backup, etc.)
1. Unzip the .zip file
2. Copy the files (that I sent you, not compressed) in the Restore-oeminfo-custombin folder of the file you downloaded and unzipped (SRKToolHuawei-Lod-Chong-V2.0).
3. In the folder (SRKToolHuawei-Lod-Chong-V2.0) runs the main file SRKToolHuawei-Lod-Chong-V2.0-20161002.exe, a window opens, wait for it to load.
4. Click on continue (if the window appears)
5. In Main Menu the option appears: 6. Restore.
6. That is the option that works for you, place the number 6 and follow the instructions.
7. Indispensable to be root, and that you have to allow everything (In the options Super user of SU or Magisk, the one that you use), otherwise when executing, you will see denied access (all in English).
8. Indispensable to have enabled developer options, debug usb active and allow debug adb in load only mode.
9. Execute actions, let the program finish, and restart the computer.
Ready.
I hope that with this you have helped, you tell me something.
The process is really short, delayed downloading the file, ready.
gaduarte7 said:
Usa el archivo (es pesado):
https://androidfilehost.com/?fid=529152257862664925 (es para Mate 8, pero sirve para desbloquear, unlock, relock, root, backup, etc)
1. Descomprime el archivo .zip
2. Copia los archivos (que te envié, no comprimidos) en la carpeta Restore-oeminfo-custombin del archivo que descargaste y descomprimiste (SRKToolHuawei-Lod-Chong-V2.0).
3. En la carpeta (SRKToolHuawei-Lod-Chong-V2.0) ejecuta principal el archivo SRKToolHuawei-Lod-Chong-V2.0-20161002.exe, se abre una ventana, esperar a que cargue.
4. Dale click en continuar (si te sale la ventana)
5. En Main Menu aparece la opción: 6. Restore.
6. Esa es la opcion que te sirve, coloca el numero 6 y sigue las intrucciones.
7. Indispensable ser root, y que lo tengas en permitir todo (En las opciones Super usuario de SU o Magisk, el que uses), de lo contrario al ejecutar, te aparece acceso denegado (todo en ingles).
8. Indispensable tener habilitado opciones de desarrollador, depuracion usb activa y permitir depuracion adb en modo solo carga.
9. Ejecuta acciones, deja que el programa termine, y reiniciara el equipo.
Listo.
Espero que con esto te halla ayudado, me avisas alguna cosa.
El proceso es corto realmente, demorada la descarga del archivo, listo.
------------------------------------------------------------
Use the file (it is heavy):
https://androidfilehost.com/?fid=529152257862664925 (it's for Mate 8, but it's used to unlock, unlock, relock, root, backup, etc.)
1. Unzip the .zip file
2. Copy the files (that I sent you, not compressed) in the Restore-oeminfo-custombin folder of the file you downloaded and unzipped (SRKToolHuawei-Lod-Chong-V2.0).
3. In the folder (SRKToolHuawei-Lod-Chong-V2.0) runs the main file SRKToolHuawei-Lod-Chong-V2.0-20161002.exe, a window opens, wait for it to load.
4. Click on continue (if the window appears)
5. In Main Menu the option appears: 6. Restore.
6. That is the option that works for you, place the number 6 and follow the instructions.
7. Indispensable to be root, and that you have to allow everything (In the options Super user of SU or Magisk, the one that you use), otherwise when executing, you will see denied access (all in English).
8. Indispensable to have enabled developer options, debug usb active and allow debug adb in load only mode.
9. Execute actions, let the program finish, and restart the computer.
Ready.
I hope that with this you have helped, you tell me something.
The process is really short, delayed downloading the file, ready.
Click to expand...
Click to collapse
Muchas gracias!!! En serio, me salvaste, ya pude reinstalar el oeminfo y recuperé la recepción 4g además de haber instalado la versión dual sim de latinoamérica.
Eres un chingón! Muchas gracias
ciceorigel said:
de verdad que agradezco la ayuda, quisiera saber si a ti sí te cambia el modelo ya que después de flashear me sigue apareciendo como L21
Click to expand...
Click to collapse
Por politicas del foro, se debe escribir en ingles.
Politica numero 4. https://forum.xda-developers.com/announcement.php?f=7342
Mi celular es RNE-L23C605 y con Android Oreo no ha cambiado el el RNE-L23.
Cuando tenia Nougat si me cambio al instalar los rom modificados de Catuva o KingOfMezi.
La pregunta es: De fabrica es RNE-L21 o RNE-L23, ahora si deseas cambiar de cust (C605 pasar a C432 o C185, o viceversa), que es posible hacer, y, cambia de L23 (C605) a L21 (C432 o C185) o viceversa, visita los foros que hay, y, busca Rebrand, que es lo que se hace.
Con Oreo no he realizado esta operacion, pero en eso los expertos son Catuva21 y KingOfMezi, ellos tienen publicaciones (ambos hablan español, pero se debe escribir todo en ingles)
KingOfMezi: https://forum.xda-developers.com/ma...m-emui-8-0-0-huawe-mate-10-lite-dual-t3784879
Catuva21: https://forum.xda-developers.com/ma...nt/rom-emui-8-0-kangvip-mate-10-lite-t3784834
--------------------------------------
By forum policy, you must write in English.
Policy number 4. https://forum.xda-developers.com/announcement.php?f=7342
My cell phone is RNE-L23C605 and with Android Oreo has not changed the RNE-L23.
When I had Nougat if I change when installing modified rom Catuva or KingOfMezi.
The question is: From the factory it is RNE-L21 or RNE-L23, now if you want to change from cust (C605 pass to C432 or C185, or vice versa), it is possible to do, and, change from L23 (C605) to L21 (C432 or C185) or vice versa, visit the forums that exist, and, look for Rebrand, which is what is done.
With Oreo I have not done this operation, but in that the experts are Catuva21 and KingOfMezi, they have publications (both speak Spanish, but you must write everything in English)
KingOfMezi: https://forum.xda-developers.com/ma...m-emui-8-0-0-huawe-mate-10-lite-dual-t3784879
Catuva21: https://forum.xda-developers.com/ma...nt/rom-emui-8-0-kangvip-mate-10-lite-t3784834