Afaneh TWRP
NOT for baseband u3 or greater
(Working u3/u4 version on post #2)
Download tar file.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
From the start
1. Download recovery tar
2. Download vbmeta disabled tar
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
12. Backup boot, data, super and dtbo
Method 3 (I used this method)
1. Download firmware
2. Extract ap file.
3. Patch the entire ap file with patched magisk provided
4. Flash ap tar file with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery
11. Wipe, format data, type YES.
12. Advanced, terminal.
13. Type multidisabler (twice).
14.Reboot to recovery
15. Backup boot, data, super and dtbo
@physwizz
New link from afaneh
[RECOVERY][UNOFFICIAL] TWRP for Galaxy A12s & M12 (Exynos)
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
Afaneh TWRP modified by physwizz
For baseband u3 & u4
Choose u3 or u4 from below
Download tar file.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
@physwizz
Sorry to say, it didn’t work on my M12 (M127GDDU2AUG1). When I flash both of these files (keeping twrp in AP and vbmeta in USERDATA) it fails and boots into download mode.
The error line in download mode says:
Recovery: No footer detected.
Recovery: Error verifying vbmeta image: invalid vbmeta header
something like that.
P.S.: I have rooted my M12 using the modified magisk for A21s.
mdbshuvo said:
Sorry to say, it didn’t work on my M12 (M127GDDU2AUG1). When I flash both of these files (keeping twrp in AP and vbmeta in USERDATA) it fails and boots into download mode.
The error line in download mode says:
Recovery: No footer detected.
Recovery: Error verifying vbmeta image: invalid vbmeta header
something like that.
P.S.: I have rooted my M12 using the modified magisk for A21s.
Click to expand...
Click to collapse
I'll give you a different method
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
11. Format data
12. Install multidisabler zip
13. Reboot to recovery
Done
Hi may i ask will twrp work on version android 10 not 11...
physwizz said:
I'll give you a different method
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
11. Format data
12. Install multidisabler zip
13. Reboot to recovery
Done
Click to expand...
Click to collapse
After step 10, the phone doesn't boot in recovery. Rather it goes into download mode and stays there until I flash the stock rom again. The error message says:
"ODIN MODE (SBV Fail)!
recovery: Error verifying vbmeta image: invalid vbmeta header (6)
CUSTOM RECOVERY
VBMETA M127GDDU2AUH1, 42200704R"
mdbshuvo said:
After step 10, the phone doesn't boot in recovery. Rather it goes into download mode and stays there until I flash the stock rom again. The error message says:
"ODIN MODE (SBV Fail)!
recovery: Error verifying vbmeta image: invalid vbmeta header (6)
CUSTOM RECOVERY
VBMETA M127GDDU2AUH1, 42200704R"
Click to expand...
Click to collapse
Did you root using the patched ap?
Try also
[RECOVERY][UNOFFICIAL] TWRP , OrangeFox and Skyhawk [Samsung-Exyons-850][m12s][a12s][SM-M127X][SM-A127X]
TWRP , OrangeFox and Skyhawk for Samsung A12/M12 Exyons850 * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns...
forum.xda-developers.com
physwizz said:
Did you root using the patched ap?
Try also
[RECOVERY][UNOFFICIAL] TWRP , OrangeFox and Skyhawk [Samsung-Exyons-850][m12s][a12s][SM-M127X][SM-A127X]
TWRP , OrangeFox and Skyhawk for Samsung A12/M12 Exyons850 * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns...
forum.xda-developers.com
Click to expand...
Click to collapse
Yes I rooted with the patched boot.img.tar, extracted from the AP file, with the modified magisk for A21s.
Pardon me for asking, I am a bit of a noob myself, what is the procedure of flashing the Multi disabler. I mean, do I flash it with Odin? or do I install with TWRP install section. If using Odin, then where to put the zip file (BL, AP, CSC or USERDATA)? If TWRP install section, then which partition (like system, boot, recovery or something else)? Thanks in advance.
mdbshuvo said:
Yes I rooted with the patched boot.img.tar, extracted from the AP file, with the modified magisk for A21s.
Pardon me for asking, I am a bit of a noob myself, what is the procedure of flashing the Multi disabler. I mean, do I flash it with Odin? or do I install with TWRP install section. If using Odin, then where to put the zip file (BL, AP, CSC or USERDATA)? If TWRP install section, then which partition (like system, boot, recovery or something else)? Thanks in advance.
Click to expand...
Click to collapse
You should have patched the full ap file.
That's why you got the vbmeta error
Method 3
1. Download firmware
2. Extract ap file.
3. Patch with patched magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery
11. Wipe, format data, type YES.
12. Advanced, terminal.
13. Type multidisabler (twice).
14.Reboot to recovery
15. Backup boot, data, super and dtbo
.
Hello does not go into twrp freezes at startup with warning installed afaneh-u3-in3.zip in AP my firmware version
A127FXXU3AUJ5
Solved from start-up method 3 Thank you
physwizz said:
You should have patched the full ap file.
That's why you got the vbmeta error
Method 3
1. Download firmware
2. Extract ap file.
3. Patch with patched magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery
11. Wipe, format data, type YES.
12. Advanced, terminal.
13. Type multidisabler (twice).
14.Reboot to recovery
15. Backup boot, data, super and dtbo
Click to expand...
Click to collapse
Well this time a new issue appeared. After step 10, the phone tries to boot into recovery. After the boot logo, the screen goes black. First, I thought the phone turned off itself. But pressing the power button doesn't turn it on again. Interestingly, when I connect the phone to PC, the phone seemed to be on. A device named "SM-127F" (though my phone is SM-127G) was found in "This PC". Running:
adb devices
Shows my phone is connected. I think it actually rebooted in recovery, though the screen remains black.
To get to download mode again, I had to press Power button + Volume down keys to shut it down, then pressed both volume keys.
mdbshuvo said:
Well this time a new issue appeared. After step 10, the phone tries to boot into recovery. After the boot logo, the screen goes black. First, I thought the phone turned off itself. But pressing the power button doesn't turn it on again. Interestingly, when I connect the phone to PC, the phone seemed to be on. A device named "SM-127F" (though my phone is SM-127G) was found in "This PC". Running:
adb devices
Shows my phone is connected. I think it actually rebooted in recovery, though the screen remains black.
To get to download mode again, I had to press Power button + Volume down keys to shut it down, then pressed both volume keys.
Click to expand...
Click to collapse
same here, but i can go adb shell, and twrp command seems working
I can wipe, format, all return ok, but flash GSI lineageOS fails, any ideas?
btw, my baseband is A127FXXU3AUJ5, tried all twrp releases here, same for all
tonyniu2008 said:
btw, my baseband is A127FXXU3AUJ5, tried all twrp releases here, same for all
Click to expand...
Click to collapse
Try this one.
mdbshuvo said:
Well this time a new issue appeared. After step 10, the phone tries to boot into recovery. After the boot logo, the screen goes black. First, I thought the phone turned off itself. But pressing the power button doesn't turn it on again. Interestingly, when I connect the phone to PC, the phone seemed to be on. A device named "SM-127F" (though my phone is SM-127G) was found in "This PC". Running:
adb devices
Shows my phone is connected. I think it actually rebooted in recovery, though the screen remains black.
To get to download mode again, I had to press Power button + Volume down keys to shut it down, then pressed both volume keys.
Click to expand...
Click to collapse
Try this one
Contact afaneh here.
[RECOVERY][UNOFFICIAL] TWRP for Galaxy A12s & M12 (Exynos)
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
physwizz said:
Try this one
Click to expand...
Click to collapse
The same thing happened as previous, the screen goes black. I can run all sorts of adb commands. Any thoughts?
mdbshuvo said:
The same thing happened as previous, the screen goes black. I can run all sorts of adb commands. Any thoughts?
Click to expand...
Click to collapse
M12 needs its own twrp
physwizz said:
Try this one.
Click to expand...
Click to collapse
same issue, just curiosity, is that just GUI issue or it is not actually working, can i futher the task by command line?
Related
Orange Fox recovery
MTP working
Built by Roger F
Modified for u2 by @physwizz
U3/U4 in post #2
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Flash multidisabler
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
For rw go to terminal
mount -o rw,remount/system_root
@physwizz
Orange Fox recovery a127f
and a127f DS/N
Built by Roger
mod physwizz
For baseband u3 & u4
Download tar file.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
@physwizz
Thanks.
TheWorldYT said:
Thanks.
Click to expand...
Click to collapse
I've just had confirmation that the u3/u4 one boots
physwizz said:
I've just had confirmation that the u3/u4 one boots
Click to expand...
Click to collapse
gsi's dont work, even though i did multidisabler it pops up with:
flash to;
boot
super
recovery
(my device a127f)
TheWorldYT said:
gsi's dont work, even though i did multidisabler it pops up with:
flash to;
boot
super
recovery
(my device a127f)
Click to expand...
Click to collapse
and i formatted my data in orange fox too, i don't know why it can't?
but i just reflashed rooted ap and reverted recovery so i don't brick my device
TheWorldYT said:
gsi's dont work, even though i did multidisabler it pops up with:
flash to;
boot
super
recovery
(my device a127f)
Click to expand...
Click to collapse
choose super
physwizz said:
choose super
Click to expand...
Click to collapse
I did that, it doesn't work, after installing it goes into a reboot loop.
I am going to stick to rooted stock for now
TheWorldYT said:
I am going to stick to rooted stock for now
Click to expand...
Click to collapse
Use my wizzROM-creator
physwizz said:
Use my wizzROM-creator
Click to expand...
Click to collapse
OK, will try later
TheWorldYT said:
OK, will try later
Click to expand...
Click to collapse
And my kernel
I confirm that ofox-rog-phy-u4-a12s works on my SM-127F/DSN with the U3 baseband with no issues whatsoever. Mounting, wiping, formatting, backups: everything works. Moreover, the internal multidisabler (called from the terminal) works! Moreover: for the first time I finally could install the phyzwizz kernels from this M12 thread and those work just fine for me, both v3 and v6. Therefore I conclude that SM-127F/DSN is actually internally M12, not A12. I don't know why Samsung chosen to name it A12.
I'll test the Vietnam-made version of SM-127F/DSN a bit later. My previous info is about the India-made version.
uluruman said:
I confirm that ofox-rog-phy-u4-a12s works on my SM-127F/DSN with the U3 baseband with no issues whatsoever. Mounting, wiping, formatting, backups: everything works. Moreover, the internal multidisabler (called from the terminal) works! Moreover: for the first time I finally could install the phyzwizz kernels from this M12 thread and those work just fine for me, both v3 and v6. Therefore I conclude that SM-127F/DSN is actually internally M12, not A12. I don't know why Samsung chosen to name it A12.
Click to expand...
Click to collapse
The build.prop shows that they were originally going to name it a12s
Also the m12 has 90Hz refresh rate
I think they change their collective minds since Oppo already had a12s registered.
I'll ask @Badger50 about having a group just for us
Orange Fox a127f DS/N u4
Built Roger F mod physwizz
Download tar file.
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
https://t.me/a127f_res/4)
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
Reboot, setup phone
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
@physwizz
Orange Fox for m12 u3 and u3
Built by Roger F
modified by physwizz
Download tar file.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
Reboot and setup phone completely
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
@physwizz
In general, things are like this, I run Odin with administrator rights, I throw twrp and vbmeta, I run it, and at the vbmeta firmware stage, a failure occurs and an inscription in red in the loader, ( SW REV. CHECK FAIL(VBMETA) DEVICE: 0x3, BINARY: 0x0
physwizz said:
Afaneh TWRP modified by physwizz
For baseband u3
Download tar file.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
@physwizz
Click to expand...
Click to collapse
So, everything went, it worked, I found another vbmeta file from samsung sm-a217f and installed it, I'll attach a working file for m12 below
thank you so much for your work
KEMLEP said:
So, everything went, it worked, I found another vbmeta file from samsung sm-a217f and installed it, I'll attach a working file for m12 below
Click to expand...
Click to collapse
You don't need vbmeta.tar if you root using the patched ap file.
I can't believe only 1 person has installed it
I noticed an unpleasant bug in orange fox on m12, when it is blocked, the swipe does not work, I swipe with my finger, and it does not work, I have to restart
and another inscription pops up in the logo "E: A render request has failed"
KEMLEP said:
and another inscription pops up in the logo "E: A render request has failed"
Click to expand...
Click to collapse
I'll post a different one soon
physwizz said:
I'll post a different one soon
Click to expand...
Click to collapse
thank you very much, I'm waiting with impatience
So it's just the only one with the m12 model, the rest with the A12, although I saw a little man with the Indian version of the F12
KEMLEP said:
thank you very much, I'm waiting with impatience
Click to expand...
Click to collapse
Done
TWRP for m12 U3 and U2
TWRP for m12 u3 (See post#2 for u2 version) Built by Afaneh mod physwizz Download tar file. Extract recovery.img from tar file Method 1. If you have already installed recovery and decrypted. 1. Boot to recovery. 2. Install recovery.img 3...
forum.xda-developers.com
Thank you, everything works, but for some reason the swipe unlock does not work, I move my finger and it stands still and does not move, and so if you turn off the screen time, then everything works, thank you again, may God give you strength and reward you all the best for your labors
KEMLEP said:
Thank you, everything works, but for some reason the swipe unlock does not work, I move my finger and it stands still and does not move, and so if you turn off the screen time, then everything works, thank you again, may God give you strength and reward you all the best for your labors
Click to expand...
Click to collapse
Thanks.
Try swiping 6 times
Root Samsung Galaxy S10 Series Android 12, WITHOUT Ramdisk Root Samsung S10+ - S10 - S10e SM-G97xxx, Stock Rom Android 12 - UI 4.1 Latest Version (I tested G970FXXSGHWC2) (Without combination keys for active Magisk after normal restart – Without press power key for warning massage booting)
How to root:
1. Extract your downloaded Rom and patch AP file with magisk (Recovery Mod)
2. Go to download mode.
3. Uncheck auto reboot in Odin.
4. Flash your patched AP file with BL CP CSC.
5. When flash passed, again we should go to download mode.
6. Hold volume down and power key, and after vibration release power key and hold Bixby key and volume down for going to download mod again.
7. Reset Odin and again uncheck auto reboot, put twrp recovery,
To AP and flash, it.
8. When passed, we need again reset and go to twrp recovery, volume down power key, after vibration release volume down and hold volume up and bixby key with power key after splash release power key and hold your volume up and bixby for 1 second then release.
9. We should be in twrp recovery mod, format data, rename magisk.apk to magisk.zip, copy magisk.zip, kernel, multi disabler and twrp boot logo to the sd card.
10. Mount your sd card and install first magsik.zip, then multi disabler, twrp boot logo and finally kernel.zip
11. Restart to system.
12. After booting to android 12 open the magisk app and let download the latest version.
13. When download finished open magisk, you will see one massage for install complete magisk after reboot in 5 seconds, cancel it and go to setting and active Zygisk and Magisk Hide, rename it.
14. When magisk hide process finished. Open again magisk, you will see the reboot massage again.
15. Tap ok and wait for rebooting.
Fix Internal Storage Size:
First Format Data.
If it doesn't work :
Boot into TWRP recovery.
Select Wipe » Advanced Wipe.
Tick/check the Data partition.
Select Repair or Change File System button.
And lastly, select Resize File System button. (Let TWRP resize your file system. It might take some time, have patience)
After reboot, your galaxy is rooted without any problem. And you can install modules zips. And enjoy your root same stock Rom without any opened bootloader warning massage first of booting android. And without press power key after that.
---------------------------------------------------------------------------------------------------------
UPDATED (G970FXXSGHWC2) Android 12 - One UI 4.1 - March 2023For update your android without losing data, follow these steps:1. Download: One of Kernels - Multidisabler Samsung 3.5 - TWRP Bootlogo Patch - Magisk - Odin 3.14.1-3B Patched.
2. In Odin uncheck Auto reboot, flash (BL - Patched AP File with Magisk - CP - Home CSC).
3. Reboot manual to download mode again, Flash TWRP Recovery in AP slot.
4. Reboot to TWRP recovery, flash Magisk.zip, Kernel and Multidisabler then TWRP Bootlogo.
5. Reboot to system and finished.
Download the latest Firmware version for your galaxy here: https://samfirms.com
Download the latest TWRP recovery version for your galaxy here: https://twrp.me/Devices/Samsung/Download the latest Magisk version for your galaxy here: https://github.com/topjohnwu/Magisk/releases
Special Thanks to Ambasadii Dev. And CruelKernel Develop Team For Kernels. Magisk Dev. TeamWin For TWRP Recovery And Odin3 Patched.
Happy to see your post!
I have Android 11 FUL1, with Magisk 23000 (last versioin with Magisk Hide and Modules) and last Official Twrp and I want to pass to Android 12.
So my question:
May I patch android 12 AP file G970FOXMEGVA4 and patch also twrp but under Android 11 and Magisk 23000?
My aim is to maintain the Twrp already present and to avoid to install stock Android 12 only to patch AP file and twrp.
Then I should start immediately with Odin, AP patched, twrp patched, multidisabler, kernel and all the orther things.
Is this possible?
And just for info, your kernel is the same as Ambasadii rom?
will try but, what to do with Downloaded Kernel?
Hello everybody, thans for the work.
I tried your method but it's not working for me.
All is good until step 7.
At Step 8, the phone restarts good on TWRP but a script is executing and the phone restarts.
On this restart, i do like you explain (hold volume up and bixby key with power key after splash release power key and hold your volume up and bixby for 1 second then release) but the phone don't restarts in TWRP and the phone vibrate instead, then the phone is freeze on SAMSUNG logo
EDIT : A resolved it by flashing the CSC file instead of the CSC HOME file.
is.Mehrdad said:
Root Samsung Galaxy S10 Series Android 12, WITHOUT Ramdisk
Root Samsung S10+ - S10 - S10e SM-G97xxx, Stock Rom Android 12 Latest Version (I tested G970FOXMEGVA4)
(Without combination keys for active Magisk after normal restart – Without press power key for warning massage booting)
Sorry For Bad ENGLISH
https://1drv.ms/w/s!AiUnkR9HkhduiqRfflrkvHqg5Ai_lQ?e=fIGiFi
Downloads:
1. Download the latest stock ROM for your galaxy here: https://samfirms.com
2. Magist the Latest Version 24.0: https://bit.ly/3rYnEzQ
3. Kernel: https://bit.ly/3o55bR1
4. TWRP Recovery, The Latest Version: https://bit.ly/3ADTk1F
5. MultiDisabler: https://bit.ly/3r693mY
6. TWRP Boot logo: https://bit.ly/33TNrRT
7. Odin 3.14.4: https://bit.ly/3o67YcG
How to root:
1. Extract your downloaded Rom and patch AP file with magisk (Recovery Mod)
2. Go to download mode.
3. Uncheck auto reboot in Odin.
4. Flash your patched AP file with BL CP CSC.
5. When flash passed, again we should go to download mod.
6. Hold volume down and power key, and after vibration release power key and hold Bixby key and volume down for going to download mod again.
7. Reset Odin and again uncheck auto reboot, put twrp recovery,
To AP and flash, it.
8. When passed, we need again reset and go to twrp recovery, volume down power key, after vibration release volume down and hold volume up and bixby key with power key after splash release power key and hold your volume up and bixby for 1 second then release.
9. We should be in twrp recovery mod, wipe data, rename magisk.apk to magisk.zip, copy magisk.zip, kernel, multi disabler and twrp boot logo to the sd card.
10. Mount your sd card and install first magsik.zip, then multi disabler, twrp boot logo and finally kernel.zip
11. Restart to system.
12. After booting to android 12 open the magisk app and let download the latest version.
13. When download finished open magisk, you will see one massage for install complete magisk after reboot in 5 seconds, cancel it and go to setting and active Zygisk and Magisk Hide, rename magisk to “manage” (without R).
14. When magisk hide process finished. Open again magisk, you will see the reboot massage again.
15. Tap ok and wait for rebooting.
After reboot, your galaxy is rooted without any problem. And you can install modules zips. And enjoy your root same stock Rom without any opened bootloader warnning massage first of booting android. And without press power key after that.
Click to expand...
Click to collapse
Fantastic instructions! Worked like a charm....except that my internal storage has gone from 128gb, to 32gb.
How can this be resolved?
I notice that the instructions did not include flashing vbmeta. Could this be problem?
BlaqqSL8 said:
Fantastic instructions! Worked like a charm....except that my internal storage has gone from 128gb, to 32gb.
How can this be resolved?
I notice that the instructions did not include flashing vbmeta. Could this be problem?
Click to expand...
Click to collapse
After step 8 you are in TWRP Recovery, You must “Format Data” in TWRP then again boot your device to TWRP recovery. After Wipe data, vbmeta and your storage will be fixed.
Be careful, After Wipe Data don't boot in OS, because you must pass other steps before boot to OS.
bruram said:
Happy to see your post!
I have Android 11 FUL1, with Magisk 23000 (last versioin with Magisk Hide and Modules) and last Official Twrp and I want to pass to Android 12.
So my question:
May I patch android 12 AP file G970FOXMEGVA4 and patch also twrp but under Android 11 and Magisk 23000?
My aim is to maintain the Twrp already present and to avoid to install stock Android 12 only to patch AP file and twrp.
Then I should start immediately with Odin, AP patched, twrp patched, multidisabler, kernel and all the orther things.
Is this possible?
And just for info, your kernel is the same as Ambasadii rom?
Click to expand...
Click to collapse
No, not working, you should install multidisabler and other files in twrp recovery.
Kernel is same
DelNero said:
Hello everybody, thans for the work.
I tried your method but it's not working for me.
All is good until step 7.
At Step 8, the phone restarts good on TWRP but a script is executing and the phone restarts.
On this restart, i do like you explain (hold volume up and bixby key with power key after splash release power key and hold your volume up and bixby for 1 second then release) but the phone don't restarts in TWRP and the phone vibrate instead, then the phone is freeze on SAMSUNG logo
EDIT : A resolved it by flashing the CSC file instead of the CSC HOME file.
Click to expand...
Click to collapse
Happy for resolved problem.
But I wrote in step 4 CSC File, Not CSC Home.
4. Flash your patched AP file with BL CP CSC.
is.Mehrdad said:
After step 8 you are in TWRP Recovery, You must “Wipe Data” in TWRP then again boot your device to TWRP recovery. After Wipe data, vbmeta and your storage will be fixed.
Be careful, After Wipe Data don't boot in OS, because you must pass other steps before boot to OS.
Click to expand...
Click to collapse
Thanks for the quick reply.
Just one more thing: Can I flash vbmeta in the CP slot, at the same time as flashing TWRP in the AP slot? Or do I have to flash them individually?
BlaqqSL8 said:
Thanks for the quick reply.
Just one more thing: Can I flash vbmeta in the CP slot, at the same time as flashing TWRP in the AP slot? Or do I have to flash them individually?
Click to expand...
Click to collapse
I don't think so
What is exactly the problem with vbmeta ?
is.Mehrdad said:
I don't think so
What is exactly the problem with vbmeta ?
Click to expand...
Click to collapse
There's no problem with vbmeta that I know of. It's just that, following your instructions, I still only have 32gb of internal storage instead of 128gb.
It would really help if you could update your instructions to include flashing the vbmeta file either via Odin, or using vbmeta.img in TWRP.
BlaqqSL8 said:
There's no problem with vbmeta that I know of. It's just that, following your instructions, I still only have 32gb of internal storage instead of 128gb.
It would really help if you could update your instructions to include flashing the vbmeta file either via Odin, or using vbmeta.img in TWRP.
Click to expand...
Click to collapse
Test this, if not working, I will test again all of my files.
After flash your patched AP, Boot to TWRP and mount all of your partitions, then restart again to twrp recovery and then do Wipe Data and again reboot to recovery for flash other files.
Boot into TWRP recovery.
Select Wipe » Advanced Wipe.
Tick/check the Data partition.
Select Repair or Change File System button.
And lastly, select Resize File System button. (Let TWRP resize your file system. It might take some time, have patience)
is.Mehrdad said:
Test this, if not working, I will test again all of my files.
After flash your patched AP, Boot to TWRP and mount all of your partitions, then restart again to twrp recovery and then do Wipe Data and again reboot to recovery for flash other files.
Boot into TWRP recovery.
Select Wipe » Advanced Wipe.
Tick/check the Data partition.
Select Repair or Change File System button.
And lastly, select Resize File System button. (Let TWRP resize your file system. It might take some time, have patience)
Click to expand...
Click to collapse
From reading many posts\instructions on how to install\root A12, I think that, where you say "WIPE DATA", It should be FORMAT DATA - YES.
I'm going to try it that way, and will let you know ow it goes.
BlaqqSL8 said:
From reading many posts\instructions on how to install\root A12, I think that, where you say "WIPE DATA", It should be FORMAT DATA - YES.
I'm going to try it that way, and will let you know ow it goes.
Click to expand...
Click to collapse
Thanks, I edited my post to Format Data.
So I followed all the steps. I did everything and everything worked as it should. However, when I get to magisk wanting to update, it does so, patches everything successfully but on restart, I get a bootloop.
Hello. Does anybody try to do it on USA Snapdragon model?
How do we install magisk with ap file?
patched ap file I did as you said but it won't load. It gets stuck loading system.img.
VenfefulRat said:
So I followed all the steps. I did everything and everything worked as it should. However, when I get to magisk wanting to update, it does so, patches everything successfully but on restart, I get a bootloop.
Click to expand...
Click to collapse
Same thing here....
Impossibile to update magisk
Gamras606 said:
patched ap file I did as you said but it won't load. It gets stuck loading system.img.
Click to expand...
Click to collapse
Uninstall Samsung drivers and install it again, reboot your pc and check it again with another USB port.
i've unlocked the bootloader of my phone, and it boots fine with stock recovery & oneui core 3.1, but whenever i install twrp or a gsi, my phone ceases to boot. any ideas?
tekkitheidiot said:
i've unlocked the bootloader of my phone, and it boots fine with stock recovery & oneui core 3.1, but whenever i install twrp or a gsi, my phone ceases to boot. any ideas?
Click to expand...
Click to collapse
Do u install TWRP through Odin?
C-Andy said:
Do u install TWRP through Odin?
Click to expand...
Click to collapse
The twrp must be built for a125w.
If you want I can modify the one you're trying but you need to send me your a125w stock recovery.img.lz4
physwizz said:
The twrp must be built for a125w.
If you want I can modify the one you're trying but you need to send me your a125w stock recovery.img.lz4
Click to expand...
Click to collapse
hello, ive been looking for a twrp that is compatible with sm-a125w because that is my model. how would i send you the stock recovery for this?
imdrew1234 said:
hello, ive been looking for a twrp that is compatible with sm-a125w because that is my model. how would i send you the stock recovery for this?
Click to expand...
Click to collapse
Just post it.
Attach files
physwizz said:
Just post it.
Attach files
Click to expand...
Click to collapse
here is the file. i included boot and vbmeta as well.
the link: https://drive.google.com/drive/folders/1L5491qUjTXUHKxXdLLlSOLBmwFY1rou-?usp=sharing
imdrew1234 said:
here is the file. i included boot and vbmeta as well.
the link: https://drive.google.com/drive/folders/1L5491qUjTXUHKxXdLLlSOLBmwFY1rou-?usp=sharing
Click to expand...
Click to collapse
Unzip to find the tar file.
Installing instructions in next post
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver and extract recovery.img from recovery.img.lz4 and compress it to recovery.tar
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
Alternatively you can extract boot.img.lz4 and vbmeta.img.lz4 from the ap file and compress them into a new tar file and then patch that file.
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file or stock recovery.tar
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
thank you so much ive been looking for this forever!
physwizz said:
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver and extract recovery.img from recovery.img.lz4 and compress it to recovery.tar
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
Alternatively you can extract boot.img.lz4 and vbmeta.img.lz4 from the ap file and compress them into a new tar file and then patch that file.
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file or stock recovery.tar
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
Click to expand...
Click to collapse
i was also wondering if you knew why i cant make modifications to /system partition. whenever i check it in mount on the main screen of twrp /system still doesn't show. I wanted to get the pixel experience rom but i cannot due to this issue im facing since the system partition does not show as a partition i can flash the custom rom to as a gsi.
imdrew1234 said:
i was also wondering if you knew why i cant make modifications to /system partition. whenever i check it in mount on the main screen of twrp /system still doesn't show. I wanted to get the pixel experience rom but i cannot due to this issue im facing since the system partition does not show as a partition i can flash the custom rom to as a gsi.
Click to expand...
Click to collapse
Do you see system.img as a partition?
physwizz said:
Do you see system.img as a partition?
Click to expand...
Click to collapse
i do. only data and system image. data doesn’t show as flashable and system image is already full plus not enough storage for the custom rom. i think that there is supposed to be a prompt from twrp when you load into it to allow modifications to the system partition but this prompt does not show on this twrp which is weird. i cannot find a solution to this issue.
i
imdrew1234 said:
i do. only data and system image. data doesn’t show as flashable and system image is already full plus not enough storage for the custom rom. i think that there is supposed to be a prompt from twrp when you load into it to allow modifications to the system partition but this prompt does not show on this twrp which is weird. i cannot find a solution to this issue.
Click to expand...
Click to collapse
If you want to install a gsi to system.img you can.
You may need to go to advanced terminal and type wipe system Or wipe SYSTEM_ROOT
physwizz said:
If you want to install a gsi to system.img you can.
You may need to go to advanced terminal and type wipe system Or wipe SYSTEM_ROOT
Click to expand...
Click to collapse
but what do i do if the system image is only 3.1gb and the rom is 3.48 gb? is there any way i can repartition it or something?
imdrew1234 said:
but what do i do if the system image is only 3.1gb and the rom is 3.48 gb? is there any way i can repartition it or something?
Click to expand...
Click to collapse
Choose a smaller gsi
physwizz said:
Choose a smaller gsi
Click to expand...
Click to collapse
i can’t seem to find any other custom roms for my model sm-a125w they are all for the sm-a125f model and i don’t want to brick my phone. do you think the f model roms would work on my model or have any rom suggestions?
physwizz said:
Choose a smaller gsi
Click to expand...
Click to collapse
whenever i try to wipe system_root it says inaccessible or not found in twrp terminal. i dont know whats going wrong here.
imdrew1234 said:
whenever i try to wipe system_root it says inaccessible or not found in twrp terminal. i dont know whats going wrong here.
Click to expand...
Click to collapse
Wipe system
tr
physwizz said:
Wipe system
Click to expand...
Click to collapse
tried that as well and same error occurs.
Hello guys, I already have the bootloader unlocked and also root, I need TWRP to download some rom, as you know the phone is not so good for games, also I have One UI Core 5.0, so it is slower.
Any solution?
I also overclocked using Hktweaks, which improved but not that much.
Hello, how did you root? I have been waiting for a stable form for a long time, and I am also waiting for TWRP for Android 12 on the A127M (There are only 11)
Jeison Dg said:
Hello guys, I already have the bootloader unlocked and also root, I need TWRP to download some rom, as you know the phone is not so good for games, also I have One UI Core 5.0, so it is slower.
Any solution?
I also overclocked using Hktweaks, which improved but not that much.
Click to expand...
Click to collapse
I have one
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (not just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
physwizz said:
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (not just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
Click to expand...
Click to collapse
SM-A127M
Hi thanks...
I'm new to this, I stayed in this step, could you help me?
I already have an unlocked bootloader, and also root patched with normal magisk (patched with AP, does that mean that I already have boot.img and vbmeta.img patched?, and they are no longer needed?) Is some kind of magisk needed for my device?
I don't understand the methods well, I'm new.
So I would just have to put the twrp file that you left me and flash it by AP with Odin? and that's all? I already have a custom recovery? I don't understand well, sorry.
Jeison Dg said:
SM-A127M
Hi thanks...
I'm new to this, I stayed in this step, could you help me?
I already have an unlocked bootloader, and also root patched with normal magisk (patched with AP, does that mean that I already have boot.img and vbmeta.img patched?, and they are no longer needed?) Is some kind of magisk needed for my device?
Click to expand...
Click to collapse
You must use delta magisk because normal magisk won't patch vbmeta
Root for all Exynos 850 devices.
Root for all Exynos 850 devices. A. Root part 1 - Preparing the file I accept no responsibility for bricked phones but I will help you to recover. 1. Download the exact firmware (including upgrade date) for your device from https://samfrew.com...
forum.xda-developers.com
physwizz said:
Debes usar delta magisk porque magisk normal no parcheará vbmeta
XDA Forums
Android Forum for Mobile Phones, Tablets, Hardware & App Development
forum.xda-developers.com
Click to expand...
Click to collapse
http://
I understand, now how do I get magisk delta?
Jeison Dg said:
I understand, now how do I get magisk delta?
Click to expand...
Click to collapse
Tap on the link in post 7
OK thanks.
so now i type multidisabler twice in advanced, terminal. I reboot the twrp and make a backup and already reboot the device?
broo, I already have twrp but the internal storage does not appear, I already wrote multidisable twice and restarted the twrp
Jeison Dg said:
broo, I already have twrp but the internal storage does not appear, I already wrote multidisable twice and restarted the twrp
Click to expand...
Click to collapse
Did you do factory reset from stock recovery?
Go here
Exynos 850 Resources ]TWRPs] [Kernels]
Devices post#1 Root method post#2 TWRP post#3 Kernels post#4 Debloaters post #5 wizzROM creators post #6 Exynos 850 Devices 1. A12s A127f & A127m 2. M12 M127f & M127g 3. A21s A217f & A217m 4. F12s F127g 5. A13 A135f & A135m 6. M13...
forum.xda-developers.com
Thank you very much, I already have twrp, now I need a custom rom or a gsi and how to install it, any tutorial?