Can some please tell me where to find the system.img file in android 2.3.4. I have the manually update but can't find that file
Hello,
I get a notification that I can update my P20 Pro from .131 version to .152 version.
The update has around 700MB, the problem is that when my update gets downloaded and when I reboot the device it reboots the device in to a TWRP where I get an error 9 with an information that the update has failed to install.
What can I do?
Should I remove TWRP, would that help?
I really want that update since I have very bad SOT (4 hours of SOT max )
Thank you all in advance
Hi,
We can't do it if you have TWRP. You must use HuRUpdater.
I did it on my P20.
You can use Huawei Firmware Finder APK on play store to download the packages.
(I will do it with 8.1.0.164 )
How to use:
Warning: Make sure you know what you are doing and do not flash firmware from other devices.
Download firmware files (for official firmware use Huawei Firmware Finder).
Put files you want to flash in a seperate folder on sdcard.
Supported zip files to flash are (name must match):
update.zip (use FullOTA file)
update_all_hw.zip
update_data_public.zip
Optional: Put recovery.img in same folder if you want to keep custom recovery.
Hi,
On Yandex i found there there is an Android 9 upgrade for Rockchip PX30. I've downloaded it and placed it in my SD card slow.
The update failed due to some verifications etc...
Is there another way to install it? I assume its because its going from 8.1 to 9 which may have different partitions etc. I've tried using the SD Firmware Tool but the downloaded firmware doesnt seem to be valid.
Here are the contents of the zip file:
compatibility.zip
boot.img
oem.new.dat.br
oem.patch.dat
oen.transfer.list
system.patch.dat
system.transfer.list
trust.img
uboot.img
vbmeta.img
vendor.new.dat.br
vendor.transfer.list.
Hi,
i've also a PX 30 that till last friday work properly but now i've a problem with bluetooth after a factory reset:
i can do pairing with my phone, i can start call..or reply at phone but NO SOUND ..(with a2dp ,app work properly and i can listen music from my phone )
Till friday with apkinstaller i saw a bluetooth.apk installed ...(i think that ins't the same that i can see inside app folder)
now i not see this app..you can share with me??
My device isn't routed ...
I also downloaded from this link https://yadi.sk/d/r4fcwhZyKeNiUAthe last rom with android 9 but not installed yet( i already updated MCU to 3.7 from 3.01_4 from this ling ..i've a MTCEGS )https://yadi.sk/d/VzQDC13g3HGZux
---------- Post added at 09:52 PM ---------- Previous post was at 09:49 PM ----------
before MCU upgrade
Hi,
Have you managed to get Android 9 on the PX30? I have tried several times but always get an error after the installation package is verified.
Cheers.
Grimzter said:
Hi,
On Yandex i found there there is an Android 9 upgrade for Rockchip PX30. I've downloaded it and placed it in my SD card slow.
The update failed due to some verifications etc...
Is there another way to install it? I assume its because its going from 8.1 to 9 which may have different partitions etc. I've tried using the SD Firmware Tool but the downloaded firmware doesnt seem to be valid.
Here are the contents of the zip file:
compatibility.zip
boot.img
oem.new.dat.br
oem.patch.dat
oen.transfer.list
system.patch.dat
system.transfer.list
trust.img
uboot.img
vbmeta.img
vendor.new.dat.br
vendor.transfer.list.
Click to expand...
Click to collapse
Did you have any luck updating to Android 9?
Archie_Slap said:
Did you have any luck updating to Android 9?
Click to expand...
Click to collapse
Hi Friends i spent this quarantena coronavirus day to upgrate my px30 android 8.1 in android 9.0!
In the url you have to add "ht".
To do this you need to install the recovery tool of android 9, it's simple you need to download this apk "RecoveryInstaller_PX30.apk" I found this apk in "tps://yadi.sk/d/Qx8le85frD93ng" from this download you take only the RecoveryInstaller_PX30.apk file. Put it in your android and make the install and run. Now you automatic reboot in recovery mode for android 9, you select update software(the second point) you select from usb or sd card an android 9 rom that you have download from Yandex (tps://yadi.sk/d/umCvHqCDzHccr/RockChip%20PX30%20%20Android%209, i take the ota version in main folder) and start the installation (long time) and important when the installation is finish the system return in recovery data, you must select WIPE DATA and apply. And the system restart with android 9.
I just did it now and it worked. My radio is an isudar px30. Good job
Update PX30 Eonon GA9253B to Android 9.0
nanoalieno said:
Hi Friends i spent this quarantena coronavirus day to upgrate my px30 android 8.1 in android 9.0!
In the url you have to add "ht".
To do this you need to install the recovery tool of android 9, it's simple you need to download this apk "RecoveryInstaller_PX30.apk" I found this apk in "tps://yadi.sk/d/Qx8le85frD93ng" from this download you take only the RecoveryInstaller_PX30.apk file. Put it in your android and make the install and run. Now you automatic reboot in recovery mode for android 9, you select update software(the second point) you select from usb or sd card an android 9 rom that you have download from Yandex (tps://yadi.sk/d/umCvHqCDzHccr/RockChip%20PX30%20%20Android%209, i take the ota version in main folder) and start the installation (long time) and important when the installation is finish the system return in recovery data, you must select WIPE DATA and apply. And the system restart with android 9.
I just did it now and it worked. My radio is an isudar px30. Good job
Click to expand...
Click to collapse
Hi everyone. Me too.. I'm trying to update my radio Eonon GA9253B. I've tried with your method but I have this error:
"Failed to update system image"
My radio have this version of Android 8.0
PX30 8.1.0 OPM8 181105.002 eng.hct 20181229.163118
So I've tried to install this version of Android 9.0:
HCT_PX30_9.0(20191218)
Because thinking was the right one for HCT build.
Can you help me to download the right one? I'd like to install a normal version, not a modded one.. thank you!
Greetings from Italy
Hi
Bought My car stereo from autostereo.com.ca for Volvo.
Have been happy with it and No problems.
But need some help as i tried to update it from
Android 8.1 to 9.0 and now it only erase and factory reset and keep ON loop.
I installer update_Malay_Mod_PX30_v_1.0_Pie_9_0_LITE_Version
And update mtce as IT Said it was 3.10 But when it installer it Said 2.5.
So need help how to get passe the loop the player is doing, IT is Px30.
Please appriciate all help i can get..
Info build and Mtc
Mtce KSP v. 3.05_1
PX30 8.1. 0 OPM8. 1811. 05. 002 eng. HTC. 20181228. 215907
Kindly regards
Alexander
Alex639 said:
Hi everyone. Me too.. I'm trying to update my radio Eonon GA9253B. I've tried with your method but I have this error:
"Failed to update system image"
My radio have this version of Android 8.0
PX30 8.1.0 OPM8 181105.002 eng.hct 20181229.163118
So I've tried to install this version of Android 9.0:
HCT_PX30_9.0(20191218)
Because thinking was the right one for HCT build.
Can you help me to download the right one? I'd like to install a normal version, not a modded one.. thank you!
Greetings from Italy
Click to expand...
Click to collapse
you need to download this apk "RecoveryInstaller_PX30.apk" ,
after this you can install the version of android 9 you prefer. Basically what I understood is that every recovery is tied to an android version. With Recovery 9 you can install android 9. Try to re-read the post I wrote above. I haven't installed a mod. version, of the mod version I only took the file with the recovery of android 9!
nanoalieno said:
Hi Friends i spent this quarantena coronavirus day to upgrate my px30 android 8.1 in android 9.0!
In the url you have to add "ht".
To do this you need to install the recovery tool of android 9, it's simple you need to download this apk "RecoveryInstaller_PX30.apk" I found this apk in "tps://yadi.sk/d/Qx8le85frD93ng" from this download you take only the RecoveryInstaller_PX30.apk file. Put it in your android and make the install and run. Now you automatic reboot in recovery mode for android 9, you select update software(the second point) you select from usb or sd card an android 9 rom that you have download from Yandex (tps://yadi.sk/d/umCvHqCDzHccr/RockChip%20PX30%20%20Android%209, i take the ota version in main folder) and start the installation (long time) and important when the installation is finish the system return in recovery data, you must select WIPE DATA and apply. And the system restart with android 9.
I just did it now and it worked. My radio is an isudar px30. Good job
Click to expand...
Click to collapse
Hi,
Is the firmware version important for recovery?
I mean I have a device with MTCD_LM instead of MTCE_GS
greetings Dimes
Dr.Dimes said:
Hi,
Is the firmware version important for recovery?
I mean I have a device with MTCD_LM instead of MTCE_GS
greetings Dimes
Click to expand...
Click to collapse
The firmware version is better respected, this procedure should be used if you want to switch from an Android 8 firmware to an Android 9 firmware. If you change the firmware version but remain in the same android the procedure is not this but another, more Simple! As for your question, it is better to respect the version you may have malfunctioning!
I tried today to update my MTCE_LM Unit from 8.1 to 9.0 with the proceed above, so I downloaded the ROmfile for the LM Unit_ota9.0 from yandex server.
I’m stuck on boot loop now.
The Unit try’s to boot up and the error with can’t boot try again or make wipe data pops up. Tried both options with no luck.
I have the possibility to go into recovery but the recovery is 8.1.3 and I think not possible anymore to load recovery 9.0 from this apk File explained above.
Is there any solution to get my unit updated?
I tried the 8.1 LM_Rom from yandex with no luck.
My Unit is a Xrross with px30 MTCE_LM. 3.01 DCMU.
I updated the LM_MCU to 3.37 with success, bevor I start flashing.
I went to 8.1 and used RecoveryInstaller PX30, it gave the Android 9 recovery but no update.zip work. They all say E1001 Failed to update system image. Status 7
I have MTCE CHS android 8.1. The MCU upgrade was successful to CHS 3.40. But while updating the rom to 9.0 it crashes. What am I doing wrong?
View attachment 5046993
Wysłane z mojego SM-N970F przy użyciu Tapatalka
Hi, it´s not able to do this update without the special APK for the Recovery Update.
The 8.1 blocks the Update with Status E7. So the internal Check fails. Maybe it works if you signed the File itself, Maybe not.
So look in the Forum for this APK-Tool. Xou have to Pay 10-20 Bucks and send your Serialnumber.
greetings Dimes
nanoalieno said:
Hi Friends i spent this quarantena coronavirus day to upgrate my px30 android 8.1 in android 9.0!
In the url you have to add "ht".
To do this you need to install the recovery tool of android 9, it's simple you need to download this apk "RecoveryInstaller_PX30.apk" I found this apk in "tps://yadi.sk/d/Qx8le85frD93ng" from this download you take only the RecoveryInstaller_PX30.apk file. Put it in your android and make the install and run. Now you automatic reboot in recovery mode for android 9, you select update software(the second point) you select from usb or sd card an android 9 rom that you have download from Yandex (tps://yadi.sk/d/umCvHqCDzHccr/RockChip%20PX30%20%20Android%209, i take the ota version in main folder) and start the installation (long time) and important when the installation is finish the system return in recovery data, you must select WIPE DATA and apply. And the system restart with android 9.
I just did it now and it worked. My radio is an isudar px30. Good job
Click to expand...
Click to collapse
Hi, exactly which package did you install (GS, HCT, LM, OLS, etc.) and which release (date)? Because I tried all the HCT files and I can't update, I'm always stuck on Android 8.1 with this version HCT4_px30_8.1_IMG (20181225)
Hi!
I have coped, with DD (/dev/block/ sda6) on adb slot_a and slot_b to .img files. 64 MB (65535 KB). This is the latest OTA SP for the Official Android 9 from Nokia.
I am trying to patch TWRP onto it, but I can't find a guide for it. Does anyone have one or can tell me how-to? Should I get the TWRP from the twrp.me for my device and patch with, or how should I do it. I'm a bit rusty, it's been a while since I hacked Android.
From TWRP later I can switch slots and copy / backup that partition too, right?
Hey guys, my junior asked me to speed up his A51 (running stock rom) and decided to try havoc os.
I managed to install twrp but I only have experience installing ROMs in ZIP format through twrp.
Havoc distributes img.xz files - see https://download.havoc-os.com/?dir=arm64-ab
Help appreciated - how do I install img.xz file with twrp?
You must Install Orange Recovery with the zip File for the Galaxy a51 (you can get the File from another Threads here). Then you must use 7zip on Windows to extract the IMG.xz File to an .img (you can click extract here in 7zip and youre done), then transver the .img File with an USB cable to your Phone, at least Install the .img File of Havoc as System image an use Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip in order to be able to boot and then you have Havoc OS Installed