Database Info

[RECOVERY][Vernee Mars][MM and N] TWRP 3.1.0-0 for Vernee Mars

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
WARNING
I am not to be held responsible for any negative outcome which might concern your device. You are doing this on your own responsibility!
BE WARNED!
DOWNLOAD
NOTICE
-on Marshmallow,one has to flash the Magisk root zip,otherwise the rom won't boot
Big thanks to @Verevka for the TWRP tree for the Vernee Apollo Lite(which was used as a base)!!
TWRP tree:
https://github.com/TheMarionette/android_device_vernee_mars_1/tree/TWRP-7.1​

How to install the recovery onto your device:
1. Rename the downloaded file to "recovery.img"
2. Download and install the SP FlashTool(Download HERE)
3. Open the SP Flashtool,it should look something like the image below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Find the Android Scattter file which you downloaded from HERE
5. Double click on the location of the recovery and select the "recovery.img"
6. make sure that nothing besides the recovery is checked for installation
7. Power off the phone
8. Connect it to the PC(it has to be turned off when being connected,you will see that it is charging,let it turn the screen off)
9. Click the DOWNLOAD button in the SP FlashTool
10.Hold the power on/off button on the phone for a short time until you hear that your computer recognized the connection(*classic usb plug-in sound*)
11. If it went well,you will get a GREEN SUCCESS ICON.
12. Profit

Added the version for MM roms!
DOWNLOAD

it isn't downloading what do i do?

It doesn't work on Nougat. Phone stuck on boot logo.

scytalemk said:
It doesn't work on Nougat. Phone stuck on boot logo.
Click to expand...
Click to collapse
You probably flashed the Marshmallow build on Nougat, of course it doesn't boot.

The Marionette said:
You probably flashed the Marshmallow build on Nougat, of course it doesn't boot.
Click to expand...
Click to collapse
Croats have always been smartasses, of course I'm not so stupid. I didn't marked system partition read only, that's why it won't boot, but it's ok now.

scytalemk said:
Croats have always been smartasses, of course I'm not so stupid. I didn't marked system partition read only, that's why it won't boot, but it's ok now.
Click to expand...
Click to collapse
I am not the one calling you stupid, no need to get sassy. Marking the system as a read-only one should be the default in my TWRP builds as far as I remember, I have no clue how yours was the only one which had that disabled. But good job at figuring it out.

can i use the MT6755 SCATTER on nougat?

[ROM] [Unofficial] [11] RevengeOS 4.0 Stable

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RevengeOS is an operating system based on Android Open Source Project, built with a unique look and performance in mind. It's daily usage ready, lightweight and elegant.​
FEATURES
RevengeOS exclusive features:
- Battery health checker
- Brand new RevengeUI, built to be different, built to be elegant (Best when i can get Official)
- Brand new media controller
- Systemwide gradients
- New lock screen clock styles
General features:
- In call haptic-feedback
- Kill app button
- Toggle battery percentage in status bar
- Resume media from Quick Settings
- Playback control from volume buttons
- Wake up with volume buttons
- Quick camera launch from sleep
- 3-button navigation system
- Pill navigation system
- Swipe to screenshot
- Wake on charge
- Proximity sensor check when waking up
- Systemwide sensor block
- And so much more!
DOWNLOADS
SourceForge
INSTALLATION
1. Flash ofox_universal.img through qfil on boot_a & boot_b OR fastboot boot <drag and drop ofox_universal.img over the cmd>
2. Format Data ( Go to Trash Icon in ofox -—> format data —-> type yes )
3 .Flash the rom using adb sideload ( go to 3 lines in the bottom right corner and select adb sideload then swipe, now you go in adb tools open the cmd and type adb sideload < drag and drop the zip over the cmd> )
4. Flash ofox zip the same way through adb sideload, it will automatically reboot to ofox after flashing done
- Optional: flash NikGApps (Basic recommended)
- Reboot
- Optional: flash Magisk (if you want to root your device as well) (it's recommended to flash Magisk post first boot)
Telegram Support
Important
Hi guys, we're posting this message today to talk about RevengeOS. We want to talk about the developers of our project.
There are just three developers that hard-worked every day for you, to deliver optimization, exclusive RevengeUI, media controller, etc. We want to make this project more and more exclusive, and we want to improve everything. And lastly, we want their users to be happy while using it. But there is a problem, three developers can't do much. So, we're here to ask if you - if you're a developer, and if you want to join us, you may do so. We have the following requirements:
Knowledge of Android and Java
Desire to be innovative
Be mad
Think you're good enough? Contact us via email!
Email: [email protected]

Thanks for the rom but can make calls but can't hear nothing on the receiver or phone speaker. Does it require certain firmware for this rom? I'm using ULM converted to N 30g.

sinkoo1979 said:
Thanks for the rom but can make calls but can't hear nothing on the receiver or phone speaker. Does it require certain firmware for this rom? I'm using ULM converted to N 30g.
Click to expand...
Click to collapse
Based on DotOS trees, I would say the recommended firmware is 30f, anyway i'll see if is a recurrent problem and try to fix, thanks man

sinkoo1979 said:
Thanks for the rom but can make calls but can't hear nothing on the receiver or phone speaker. Does it require certain firmware for this rom? I'm using ULM converted to N 30g.
Click to expand...
Click to collapse
Bro HOW TO CONVERRT ULM TO N?

AbboSSoft said:
Bro HOW TO CONVERRT ULM TO N?
Click to expand...
Click to collapse
follow this guide https://forum.xda-developers.com/t/...g7-g7-dual-sim-thinq-except-t-mobile.3915303/

this ROM is very good on games, but the phone signal is suddenly lost, and comes back after hours.
i use the canadian 30d rom.

Google Pay works without Magisk?

Astur13 said:
Google Pay works without Magisk?
Click to expand...
Click to collapse
it wont

Shykan003 said:
this ROM is very good on games, but the phone signal is suddenly lost, and comes back after hours.
i use the canadian 30d rom.
Click to expand...
Click to collapse
did you use airplane mode ? if yes then its a visual bug what's happening with signal, in fact you do have signal. if its not that then maybe try another firmware, check dotos thread for the recommended firmwares.

EmanuelCN said:
it wont
Click to expand...
Click to collapse
Thanks! I supposed it. I used to use Magisk long time ago but at present, does it fails often when SafetyNet update? When happens, does it take too much time until Magisk fix it? It is crucial for me knowing about this, thanks you a lot. Excuse me the off topic

Astur13 said:
Thanks! I supposed it. I used to use Magisk long time ago but at present, does it fails often when SafetyNet update? When happens, does it take too much time until Magisk fix it? It is crucial for me knowing about this, thanks you a lot. Excuse me the off topic
Click to expand...
Click to collapse
Enable magisk hide in magisk settings and its fixed. Also do not use magisk to check for safetynet use Safetynet Evaluation on playstore. Magisk's checker is broken it will show not passing no matter what, which is because the checker itself its broken not safetynet.

Hi. I built CherishOS using the same dotOS device tree, but I had mobile data not working issue. Do you have any idea?

Sorry that i have few knowlege...
The question is: How can I extract boot.img?
For now I am struggling installing magisk. I was warned by xda gudiance that the method of magisk in recovery is abandoned, and the method of re-package boot.img is recommended. Is it same with official stock? or should I use recovery.img instead?
Sorry I am not good as English as well, and sincerely thanks for your efforts!

I need a new rom. Can anyone give advice?

USB Tethering working ?

i think this is the best rom for our lg. thank you for you work

Development [RECOVERY][UNOFFICIAL] TWRP 3.5.2 for Moto Edge S

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Compatible with Lineage Modded 18.1 only!
Instructions
1. Download TWRP image
2. fastboot boot twrp-3.5.2_11.0-2-nio.img
3. Enter Passcode if you have to decrypt /sdcard
4. adb push twrp-3.5.2_11.0-2-nio.img /sdcard
5. Click Backup -> Only Select Boot and Swipe to Backup
6. Go back to Main Menu, -> Advanced -> Install Recovery Ramdisk
7. Find and Select twrp-3.5.2_11.0-2-nio.img -> Swipe to Install
8. Done! If any issues, restore the backup made before.
Downloads
https://build.lolinet.com/file/twrp/nio/twrp-3.5.2_11.0-2-nio.img
Donations
https://paypal.me/electimon
Contributors
@Electimon, betaxab
Version Information
SourceCode: https://github.com/ixmoe/android_device_motorola_nio_twrp/tree/twrp-11.0
Version Information
Status: Stable
Release Date: July-9-2021
Last Updated: July-9-2021

That's great! Waiting for the fixes and the TWRP Installer.

Nice work Dev ! I will test with Lineage Modded later today , thanks a lot .

Lineage modded is not distributed as an OTA package.

Everything working so far with LOS Modded on The G100 Model. Thanks dev !

Will there be a version compatible with stock ROM?

gewe said:
Will there be a version compatible with stock ROM?
Click to expand...
Click to collapse
When I figure out how todo it yes

Electimon said:
When I figure out how todo it yes
Click to expand...
Click to collapse
Is recovery somehow tied to the ROM? I thought recovery can be anything regardless of what the ROM is, as long as bootloader is unlocked.

Tried while stock rom was installed. Its fine when booted from fastboot. But if installed, touchscreen doesn't work.
Will try on lineage modded and see.
Edit: it works with a mouse. So touchscreen doesn't work, yet to try on lineage modded.

can't start adb sideload mode .
failed reason unkown.
lsusb shows no device presented while enter the sideload mode.

i flashed it directly, like this:
Code:
fastboot flash boot twrp-3.5.2_11.0-2-nio.img
is this ok ?

Hello,
What's going on with TWRP? twrp-3.5.2_11.0-3-nio.img just flashes and won't work and twrp-3.5.2_11.0-2-nio.img isn't booting on my G100 any ideas?
Thanks

Hello,
Finally was able to get this installed on my Moto G100 but it's essentially useless. I can't access the internal flash on the unit from Windows in MTP mode after formatting flash to wipe so I can install lineageOS and Gapps. Essentially have to get LOSrecovery installed and then do sideload because I can't do what I need to with this. The newer version just flashes the screen. Are we going to get one that actually works?
Thanks!

marcusah123 said:
Hello,
Finally was able to get this installed on my Moto G100 but it's essentially useless. I can't access the internal flash on the unit from Windows in MTP mode after formatting flash to wipe so I can install lineageOS and Gapps. Essentially have to get LOSrecovery installed and then do sideload because I can't do what I need to with this. The newer version just flashes the screen. Are we going to get one that actually works?
Thanks!
Click to expand...
Click to collapse
Yes I have a beta version that has that functionaility working already, just working on slot switching bugs.

Hello,
Awesome!!!! Cannot wait to give it a go. You're doing great work and I hope to use this along with LineageOS and have this as my new phone to use!! WOOOHOO!
Thanks and sorry if I came across as rude!
Additionally I can't sideload gapps as it says there isn't enough room... uhg these two slot phones essentially suck a lot... the DooGee S95 Pro I have is so much simpler!

ETA? Oh yea sorry don't ask for ETAs ever!

Oh I just hope it's soon so I can start using the phone. Do you need some bug spray?
Anyhow I'll use whatever version you have A/B switching aside because you can switch from A to B easily with fastboot, while you work out the last bugs.
Thanks and appreciate your work.
And then I ask for an update!

Any updates or development of this?

funciona para moto g 100?

Hi

[CLOSED] [ROM][12][hotdogb] The Kraken Project [AOSPK]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kraken for Oneplus 7T [hotdogb]
What is this?
Kraken is an AOSP based ROM, made for the best pure Android experience!
Based on Android 12
Known issues
Sometimes when unlocking via FOD, screen goes HBM (fixed on 08/11/21 build)
You tell me
How to flash:
1. Be sure you are on latest stable OOS.
2. Download this recovery and flash via fastboot.
(the command to flash is: fastboot flash recovery recovery.img)
3. Reboot to recovery and format data/factory reset and choose F2FS
4.After format is done, go to Apply Update and select via ADB.
5. On your PC, do adb sideload Krakenzipname.zip
6. Once its done flashing, reboot and enjoy.
Download from Sourceforge
Donate
PayPal
Buy Me a Coffee
Stay tuned
Telegram channel
Telegram group​
Android OS version: 12
Security patch level: November, 2021
Build author/Device Maintainer: matt0301
Device Source code: https://github.com/AOSPK-Devices
Kernel Source code: https://github.com/AOSPK-Devices
Source code: https://github.com/AOSPK
ROM Developer: mamutal91

For this build, I really wanna thank @npv12 for all his trees. You are awesome buddy!
And all my fellow testers, who always helped me debugging my stuff

any flashing instructions

boots great.nice build.verizon sim doesnt work and couldnt find any theme setting to make ui pitch black like monet engine.

gillim74 said:
boots great.nice build.verizon sim doesnt work and couldnt find any theme setting to make ui pitch black like monet engine.
Click to expand...
Click to collapse
Can you help us with the flashing guide? Right now I am on PE 11

In bootloader mode:
1) fastboot flash recovery debugrecovery.img or android12recovery.img by John Galt (Telegram)
2) fastboot reboot recovery
3) enable adb sideloading installation mode
4) adb sideload rom.zip
5) adb reboot recovery (should now be rom's built in recovery)
6) format data using rom's built in recovery
7) reboot to new rom and enjoy

https://sourceforge.net/projects/rom-matt0301/files/recovery.img/download
Debug recovery by Matt0301

New build.
The device changes is a better and faster FOD, and the slow charging info bug fixed.
To see more about what is going on source, look at our github or gerrit

Working great so far! I noticed that Google Camera GO is included, but is there a way to get the stock camera app to work on this ROM?

Working perfectly . Is there a way to activate alert slider's total silence mode or manage alert slider ? . Thanks again

Does the latest build have pixel launcher or which launcher included in the build
Pls reply me asap

matt0301 said:
New build.
The device changes is a better and faster FOD, and the slow charging info bug fixed.
To see more about what is going on source, look at our github or gerrit
Click to expand...
Click to collapse
Does this build have pixel launcher

Sarkarrgvv said:
Does this build have pixel launcher
Click to expand...
Click to collapse
I'm running the latest build and yes it has the pixel launcher.

Here are a few bugs I've noticed so far:
1. Half of the notifications panel (where the notifications are shown, not the toggles area) randomly becomes transparent.
2. Sudden increase in contrast of screen colors (they look much darker). This appears to be related to the fingerprint unlock animation. The screen colors change during the unlock, and sometimes tend to stick.
3. Double tap to wake is not reliable. Sometimes it works, sometimes it doesn't.

All aosp12 roms have these issues

Nice Rom, runs pretty good so far. Is there a way to remove the custom corner radius? It makes the bezzles thicker.

@matt0301 Nice work man, to get this a12 way early. been using from 2 days without any issues.
​

HueyT said:
All aosp12 roms have these issues
Click to expand...
Click to collapse
do you know how to get it working with verizon?

call Vzw and request Cdma less service

I am having the same issue with verizon sim. Rom installs and boots fine but doesn't notice verizon sim. Works fine on other roms though.

[gargoyle GSI] LineageOS 20 for Unihertz Titan, Pocket and Slim

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
What works works, what doesn't should be reported, be smart, investigate your issue before you report it. Report on Github
I offer a certain level of support with my releases, but I am a single guy working on lots of projects.
The release described here has been vetted by at least a dozen people across the Unihertz Titan line.
More join the ranks, literally every day.
There will be bugs. Almost nothing you do during this process can hard brick your device. Believe me, I've
put these phones through hell getting everything running.
You should have a certain level of technical inclination to take on the task of applying this software. I have
put documentation in place and built tools to assist you. It is pretty solid.
I offer no warranty on what happens after you install this software. None. Period. I will however offer
instructions on how to return to stock software.
I make no promises to how often I will build new releases, but will try to keep up with things. I do plan on supporting this project on
an ongoing basis.
LineageOS 20 is based on Android 13.
The Unihertz Titan, Pocket and Slim are a series of phones with physical keyboards.
The device tree is available if you want to build it yourself. See Instructions here.
Known Issues:​
Sim-based NFC Contactless payment
FM Radio does not work
Releases and Installation Instructions are offered on Github​
Report issues on Github​
Join us on the Discord for more interactive support and discussion.​
Credits​
AndyYan
CatWithCode
SolidHal
Testers​
tommel2
Randy_
SuYe
33YN2
g.benkaliuk
Jenser
cipharius
ScentedOrange
Honerable Mentions​
dodoradio
Generous Contributions​
Jenser
Nomi
33YN2
tommel2
All Donations will be put towards getting a Unihertz Tank running with Lineage 20 as well.

reserved

reserved

reserved

Wow, seems this is worth to try on my Titan Slim.
But I have few questions:
Is it suitable for daily driver (I know there will be some bugs)?
Original Titan Slim had problem with wifi disconnections which were partialy solved by the stock firmware , but still WPA3 is not working and WPA2 + 802.11w (Management Frame Protection) is not working too.
Is this problem solved? https://forum.xda-developers.com/t/...os-20-networking-configuration-issue.4572379/
Can google apps be loaded together with the image or should be loaded later?
Will Blackberry keyboard work?
Most important, for me personally, are working Ctrl+C and Ctrl+V ion the hw keyboard....
Thanks

michalko58 said:
Wow, seems this is worth to try on my Titan Slim.
But I have few questions:
Is it suitable for daily driver (I know there will be some bugs)?
Original Titan Slim had problem with wifi disconnections which were partialy solved by the stock firmware , but still WPA3 is not working and WPA2 + 802.11w (Management Frame Protection) is not working too.
Is this problem solved? https://forum.xda-developers.com/t/...os-20-networking-configuration-issue.4572379/
Can google apps be loaded together with the image or should be loaded later?
Will Blackberry keyboard work?
Most important, for me personally, are working Ctrl+C and Ctrl+V ion the hw keyboard....
Thanks
Click to expand...
Click to collapse
1 it is suitable for daily use.
2 i have not heard anything from the users to suggest issues with wifi exist. It is easy to revert to stock if you encounter issues.
3 yes, this is solved and packed into the system image by default.
4 they can be loaded manually or by magisk module.
5 yes, it works great. Many users use it.

Great! Thank you for your answers.
Google apps from this link https://androidfilehost.com/?w=files&flid=322935 should be v13 and 64bit, I suppose?
Support for ctrl+v and ctrl+c is working or will it be functional soon?
Is there some instruction, how to safely revert to stock firmware availaible? I think it will be via adb, but I am asking to be sure.
Once again, thanks!

So, I am stucked at rooting, for now. I have been following these instructions: https://gist.github.com/rumplestilzken/1d66b6e3aae16ece75f06b00d466d246
Everything goes fine, without any error, to line 10. Then at line 11 "finalize settings and reboot" I don't know which settings exactly to finalize. I have tried "Direct install" too, but it didn't helped.
When typing "adb root" I get:
Code:
adb root
adbd cannot run as root in production builds
Then adb remount and other commands doesnt work...
I have found this Magisk module: https://github.com/tiann/adb_root After its installation and reboot I get:
Code:
adb root
adbd is already running as root
But if I continue to adb remount I get:
Code:
adb remount
/system/bin/sh: /system/bin/remount: inaccessible or not found
What am I doing wrong? I have been trying various installations including newer Magisk 26.1