Hi guys my original csc is ORX slovakia,I try flash XID firmware via odin,everything is ok ,i have call recorder,but now I wanna go back to my original csc,but when i download lastest firmware for my Country Slovakia ORX,with October security patch, my csc change to DBT i cant back to ORX,why? My sim card is from my operator,now i have DBT/DBT/DBT/EUX/ORX.
maxpaynezm said:
Hi guys my original csc is ORX slovakia,I try flash XID firmware via odin,everything is ok ,i have call recorder,but now I wanna go back to my original csc,but when i download lastest firmware for my Country Slovakia ORX,with October security patch, my csc change to DBT i cant back to ORX,why? My sim card is from my operator,now i have DBT/DBT/DBT/EUX/ORX.
Click to expand...
Click to collapse
i flashed XID via odin, but my CSC doesnt changed. my original csc is XSG
Related
Had issue with my note 3
But fixed finally
1/step: dowloand single csc firmware, example 3 ireland has single csc perfect for this issue.
2/step: install 3 ireland firmware via odin.
3/step: after finishing full wipe resetting the device
Complete full setup and finish everything
4/step: than download btu firmware and instal via odin
Wait for finish then when you see first samsung logo on the screen pull out the battery wait for 5to10 second then put batery back and start with recovery mode and fully reset the device
Then boot device normally, you'll have btu csc on the device
1980aksoy said:
Had issue with my note 3
But fixed finally
1/step: dowloand single csc firmware, example 3 ireland has single csc perfect for this issue.
2/step: install 3 ireland firmware via odin.
3/step: after finishing full wipe resetting the device
Complete full setup and finish everything
4/step: than download btu firmware and instal via odin
Wait for finish then when you see first samsung logo on the screen pull out the battery wait for 5to10 second then put batery back and start with recovery mode and fully reset the device
Then boot device normally, you'll have btu csc on the device
Click to expand...
Click to collapse
If you read other post is another simple way.You flash Singapore NB4 wipe factory reset,wipe cache than flash BTU NB7 wipe factory reset,wipe cache and you have newer firmware and BTU CSC.NO NEED pull out batery or everything else.
orly_mihai said:
If you read other post is another simple way.You flash Singapore NB4 wipe factory reset,wipe cache than flash BTU NB7 wipe factory reset,wipe cache and you have newer firmware and BTU CSC.NO NEED pull out batery or everything else.
Click to expand...
Click to collapse
I never pull and put the batery. Is for what that????????????
I've got a non rooted N9005, originally ITV csc. I flashed NB3 Poland and now NB7 BTU. If I do a *#1234# I've got CSC: N9005OXAENB1.
If I go to stock recovery it says "Successfully applied ITV CSC".
If I want to get the original ITV CSC do I need to do something else?
GDT said:
I've got a non rooted N9005, originally ITV csc. I flashed NB3 Poland and now NB7 BTU. If I do a *#1234# I've got CSC: N9005OXAENB1.
If I go to stock recovery it says "Successfully applied ITV CSC".
If I want to get the original ITV CSC do I need to do something else?
Click to expand...
Click to collapse
I used a free tool from the play store to check mine, called Samsung Phone Info. This will tell you what CSC you have applied.
zomig said:
I used a free tool from the play store to check mine, called Samsung Phone Info. This will tell you what CSC you have applied.
Click to expand...
Click to collapse
It says ITV. I think it should be right.
GDT said:
I've got a non rooted N9005, originally ITV csc. I flashed NB3 Poland and now NB7 BTU. If I do a *#1234# I've got CSC: N9005OXAENB1.
If I go to stock recovery it says "Successfully applied ITV CSC".
If I want to get the original ITV CSC do I need to do something else?
Click to expand...
Click to collapse
"Successfully applied ITV CSC" mean You have by default ITV from Your Rom before on file /efs/imei/mps_code dat. Is from here the csc is applied by Stock Recovery where it need.
On this file /mps_code.dat is installed the CSC by default from all Clean install Roms (full wiped before).
Then, You installed the NB7 BTU Rom, but this Rom have also the ITV. This CSC is installed well because Your default ITV on /mps_code.dat.
To see this file only whit root but You can read this : http://forum.xda-developers.com/showthread.php?t=2670084
Your Rom are well, not worry.
---------- Post added at 11:16 AM ---------- Previous post was at 11:08 AM ----------
To Italian Members.
If have Your Rom XXUENB7 BTU whit BTU by default and You have BTU but not Your ITV csc You can flash my Mod csc ITV on customer recovery.
See it here : http://forum.xda-developers.com/showthread.php?t=2666907 Post #2.
ValenteL said:
I never pull and put the batery. Is for what that????????????
Click to expand...
Click to collapse
I never pull out batery and that was trying to explain to the man there is a simple way.
orly_mihai said:
I never pull out batery and that was trying to explain to the man there is a simple way.
Click to expand...
Click to collapse
Good. Sorry. I understand.
HI.
I have 935F I bought with the CSC TPA.
I flashed a new firmware with another CSC, and now the CSC of my phone is empty (Recovery says multi-csc).
I flashed via odin AP. Do I need also to flash the CSC file in odin?
What is the solution to get the new CSC?
Thanks!
tal_be said:
HI.
I have 935F I bought with the CSC TPA.
I flashed a new firmware with another CSC, and now the CSC of my phone is empty (Recovery says multi-csc).
I flashed via odin AP. Do I need also to flash the CSC file in odin?
What is the solution to get the new CSC?
Thanks!
Click to expand...
Click to collapse
Hi
what files did you flash? all 4 files?
What did you use home_csc or CSC
I do also have the same doubt. If a flash a BTU firmware over a ZTO one, will I be able to get my csc back to ZTO without root?
MAX 404 said:
Hi
what files did you flash? all 4 files?
What did you use home_csc or CSC
Click to expand...
Click to collapse
I flashed only the AP file. Should I use also the CSC file?
nanca said:
I do also have the same doubt. If a flash a BTU firmware over a ZTO one, will I be able to get my csc back to ZTO without root?
Click to expand...
Click to collapse
tal_be said:
I flashed only the AP file. Should I use also the CSC file?
Click to expand...
Click to collapse
Hi mates
You can change from one csc to another without problem , root is no need but when changing CSC you will factory reset your phone , if you keep same csc you can upgrade firmware without factory reset ( no data loss) when you keep the same csc you use home_csc file ( odin flashing) . if you change CSC , you need to flash the CSC file ( this will factory reset your phone.
@tal_be yes you do, actually is recommended to flash all four files
Check this thread
MAX 404 said:
Hi mates
You can change from one csc to another without problem , root is no need but when changing CSC you will factory reset your phone , if you keep same csc you can upgrade firmware without factory reset ( no data loss) when you keep the same csc you use home_csc file ( odin flashing) . if you change CSC , you need to flash the CSC file ( this will factory reset your phone.
@tal_be yes you do, actually is recommended to flash all four files
Check this thread
Click to expand...
Click to collapse
Can I Flash only the AP and CSC files?
Hi I got the same problem. I flashed all 4 files (CSC no home_CSC), and "original CSC code" is empty, active csc is XEF, and available csc are multiple. I flashed BTU but it stil XEF.
tal_be said:
Can I Flash only the AP and CSC files?
Click to expand...
Click to collapse
Yes you can....but as i said recommended is the four of them
---------- Post added at 07:55 AM ---------- Previous post was at 07:37 AM ----------
wolkowicz said:
Hi I got the same problem. I flashed all 4 files (CSC no home_CSC), and "original CSC code" is empty, active csc is XEF, and available csc are multiple. I flashed BTU but it stil XEF.
Click to expand...
Click to collapse
Hi mate
I should had changed m BTU is a single csc firmware , where did you get the firmware from , no errors during odin flashing??
MAX 404 said:
Yes you can....but as i said recommended is the four of them
---------- Post added at 07:55 AM ---------- Previous post was at 07:37 AM ----------
Hi mate
I should had changed m BTU is a single csc firmware , where did you get the firmware from , no errors during odin flashing??
Click to expand...
Click to collapse
I download frimware from sammobile.com. Try two times, both successful without any errors. Even after flash new rom when I choosing language there is french as first not english.
wolkowicz said:
I download frimware from sammobile.com. Try two times, both successful without any errors. Even after flash new rom when I choosing language there is french as first not english.
Click to expand...
Click to collapse
and you are using CSC not home_csc file right? also latest odin version..
MAX 404 said:
and you are using CSC not home_csc file right? also latest odin version..
Click to expand...
Click to collapse
Yes and yes. Odin 3.12.3
I have done same thing last year on S6 (from TPL to BTU) and there were no problems. But this is strange.
wolkowicz said:
Yes and yes. Odin 3.12.3
I have done same thing last year on S6 (from TPL to BTU) and there were no problems. But this is strange.
Click to expand...
Click to collapse
It really is....try a different single CSC firmware ( other than BTU) see if it change and if it does try again with BTU
wolkowicz said:
Hi I got the same problem. I flashed all 4 files (CSC no home_CSC), and "original CSC code" is empty, active csc is XEF, and available csc are multiple. I flashed BTU but it stil XEF.
Click to expand...
Click to collapse
Original csc code requires root.
Sent from my SM-G930F using Tapatalk
Hi, I bought a Galaxy S8+ that has XSG as CSC. As I've read, it's part of the Multi-CSC list and can't change the CSC to other Multi-CSC code (AFAIK).
So.. Can I flash the DBT firmware? If I flash DBT firmware will I get the OTA updates from the DBT? Or I will not get OTA and I'll have to reflash the firmware via Odin everytime I want to update?
Hi,
I've flashed the latest BTU nougat on my S7: G930FXXS2DRC3 wanting to upgrade to Oreo via OTA from that.
After flashing the firmware, I wiped the cache and reset to factory settings via the recovery menu.
However, when checking for updates, I'm not receiving any OTA update for Oreo and according to the Phone Info app, my details are:
Product Code: SM-G930FZKAXEU
Firmware's CSC Code: XEU
Active CSC Code: XEU
Available CSC Codes: BTU, CPW, DBT, ITV, KOR, NEE, XEF, XEO, XEU
Bootloader Version: G930FXXS2DRC3
PDA Version: G930FXXS2DRC3
CSC Version: G930FOXA2DRB1
Baseband Version: G930FXXU2DRB6
I also checked with Smartswitch on PC, and it believes my S7 is on the most up to date firmware.
Any ideas/suggestions to make OTA work and use BTU as the active CSC code?
Bonus Question:
I also got a Note 8 recently and did similar, it was originally on the TIM CSC code, and I flashed the latest BTU Oreo firmware to it, again wiping the cache and resetting to factory settings after, and on that I can also see it set to XEU in the CSC, however my brother also has a Note 8 bought from the UK, and he was able to update to Oreo via OTA and his settings in the Phone info app are identical to mine. Are future OTA updates something to be worried about on mine?
Thanks
Just flash the BTU Oreo 8.0 stock firmware from sammobile / updato / samfirm tool
BTU is multi-CSC and includes XEU so if your phone is XEU it will default to XEU as was also the problem I had
Once you've flashed the BTU 8.0 Firmware, your CSC will remain XEU but you will be running BTU 8.0 firmware, then we just wait for XEU to receive it and flash it back over the top using HOME_CSC so not to lose any data
*Detection* said:
Just flash the BTU Oreo 8.0 stock firmware from sammobile / updato / samfirm tool
BTU is multi-CSC and includes XEU so if your phone is XEU it will default to XEU as was also the problem I had
Once you've flashed the BTU 8.0 Firmware, your CSC will remain XEU but you will be running BTU 8.0 firmware, then we just wait for XEU to receive it and flash it back over the top using HOME_CSC so not to lose any data
Click to expand...
Click to collapse
Yeah I've noticed that is now available now, but it's a pain if you can never have BTU OTA.
Why would you need to wait for XEU to receieve it to flash it back though? To restore OTA for XEU updates?
XLAAX said:
Yeah I've noticed that is now available now, but it's a pain if you can never have BTU OTA.
Why would you need to wait for XEU to receieve it to flash it back though? To restore OTA for XEU updates?
Click to expand...
Click to collapse
Yea, not sure if BTU firmware would succeed with an XEU OTA, possible it would fail / brick or just not find any OTA at all as the build number the CSC is looking for would not be present
There are guides to flash from XEU to BTU but so far they all failed for me, the main one is to flash to a completely different region first that is not included in the BTU CSC, KSA was recommended, but that just failed and bricked my phone, after about 4-5 different attempts using different guides to get the BTU CSC I gave up
I have had BTU on here before with the N beta last year but not since flashing back to XEU
Hello,
last days I flashed the new Oreo firmware for my SM-G930F, available now only for UK (BTU CSC code). I used the last odin version 3.13.1. When the firmware was flashed, after factory recet I received my old CSC code (XEO). I wrote in forums, that if I want to changthe default CSC I have to set in odin settings Repartition. So yesterday evening I decided to reflash the firmware, but now with ticked Repartiotion. When I cklicked on Start, afer one two seconds red Fail windows has been shown. Why I can't flash the firmware with set Repartition? Does somebody have an idea what went wrong?
Reasons why I want to change the CSC code by default from XEO to BTU is that BTU receives the updates at the earliest!
Gisar said:
Hello,
last days I flashed the new Oreo firmware for my SM-G930F, available now only for UK (BTU CSC code). I used the last odin version 3.13.1. When the firmware was flashed, after factory recet I received my old CSC code (XEO). I wrote in forums, that if I want to changthe default CSC I have to set in odin settings Repartition. So yesterday evening I decided to reflash the firmware, but now with ticked Repartiotion. When I cklicked on Start, afer one two seconds red Fail windows has been shown. Why I can't flash the firmware with set Repartition? Does somebody have an idea what went wrong?
Reasons why I want to change the CSC code by default from XEO to BTU is that BTU receives the updates at the earliest!
Click to expand...
Click to collapse
BTU contains XEU as it is Multi-CSC, you cannot switch between them directly
You need to flash a different region CSC not included in BTU first, then flash BTU
*Detection* said:
BTU contains XEU as it is Multi-CSC, you cannot switch between them directly
You need to flash a different region CSC not included in BTU first, then flash BTU
Click to expand...
Click to collapse
Which for example? Can I use one of the following: VOD or VDI? Both of them have available Oreo firmwares. Oherwise I have to downgrade to Nougat (by the way, how can I downgrade using odin?)
Gisar said:
Which for example? Can I use one of the following: VOD or VDI? Both of them have available Oreo firmwares. Oherwise I have to downgrade to Nougat (by the way, how can I downgrade using odin?)
Click to expand...
Click to collapse
One with the same bootloader version as you are running, probably version 2
You can tell by this number in the firmware version
G930FXXU2ERD5
Have a look in download mode for B:2 or whatever number it says and match to the firmware
Downgrade the same way you upgrade, but use ODIN 3.12.7 for Nougat
Do not flash the VOD (vodafone) Oreo, it is bricking devices, very broken, only flash BTU Oreo
*Detection* said:
One with the same bootloader version as you are running, probably version 2
You can tell by this number in the firmware version
G930FXXU2ERD5
Have a look in download mode for B:2 or whatever number it says and match to the firmware
Downgrade the same way you upgrade, but use ODIN 3.12.7 for Nougat
Do not flash the VOD (vodafone) Oreo, it is bricking devices, very broken, only flash BTU Oreo
Click to expand...
Click to collapse
One moment, I want to switch from XEO (Poland) to BTU by defauld, not from XEU. Can you explain more deteiled haw to proceed (I am not so experienced)? Thanks in advance!!!
Gisar said:
One moment, I want to switch from XEO (Poland) to BTU by defauld, not from XEU. Can you explain more deteiled haw to proceed (I am not so experienced)? Thanks in advance!!!
Click to expand...
Click to collapse
Exactly the same as XEO is also included in the BTU CSC
*Detection* said:
Exactly the same as XEO is also included in the BTU CSC[/QUOTE
What about flashing the same firmware with odin 3.13.1, but with ticked repartition in the option? This, regarding the comments in sammobile forum works. But for me doesn't. Maybe for Oreo it doesn't work or there is something specifically to do?
I can't catch your proposal for flashing the other firmware. Can you tell me which exactly firmware I have to flash first, later on to receive BTU Oreo CSC as default?
Click to expand...
Click to collapse
When I flash first MTL CSC android 7 and then flash oreo BTU, will it change my CSC code from XEO to BTU?