Database Info

[Help][xperia f3113][dead]

Hello, excuse my bad english I'm using google translate.
The problem I have is that my xperia xa is dead.
the reason of it, was that I wanted to flash the rom of my cell to remove the applications that come with the mobile company.
when I realized my error, was that I did the following, in the flash tool, in the rom selection, I made the error, not selecting the following settings:
-APPS_LOG
-DIAG
-QNOVO
-USERDATA
-CUST-RESET
as shown in the following image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when the flash operation ended, the cell phone did not want to turn it on, the only function it had and has so far, is that it does not vibrate, it does not turn on, it does not go into flash or fastboot mode, it's dead, it just turns on the red led.
when I try to perform the flash operation again, I simply get the following message when I connect the device.
in the windows device manager, recognizes the phone as "usb serial device (com)".
I searched the net, and I did not find the solution to this problem, I appreciate your attention, and I expect some help.
PD: I already tried the connection with pc companion, and even the function from system symbol of windows with the tool fastboot to flash the boot, with the img.
the problem is that the device does not go into any mode

1990macsfull said:
Hello, excuse my bad english I'm using google translate.
The problem I have is that my xperia xa is dead.
the reason of it, was that I wanted to flash the rom of my cell to remove the applications that come with the mobile company.
when I realized my error, was that I did the following, in the flash tool, in the rom selection, I made the error, not selecting the following settings:
-APPS_LOG
-DIAG
-QNOVO
-USERDATA
-CUST-RESET
as shown in the following image:
when the flash operation ended, the cell phone did not want to turn it on, the only function it had and has so far, is that it does not vibrate, it does not turn on, it does not go into flash or fastboot mode, it's dead, it just turns on the red led.
when I try to perform the flash operation again, I simply get the following message when I connect the device.
in the windows device manager, recognizes the phone as "usb serial device (com)".
I searched the net, and I did not find the solution to this problem, I appreciate your attention, and I expect some help.
PD: I already tried the connection with pc companion, and even the function from system symbol of windows with the tool fastboot to flash the boot, with the img.
the problem is that the device does not go into any mode
Click to expand...
Click to collapse
2 times so far, my XA died the same way after trying to flash a mod. Both times I was eventually able to resurrect it by holding down various combinations of buttons while plugging and unplugging, trying different cables, etc. The second time, it wouldn't do anything until the next day, and then it suddenly came to life when using a different cable and plugging into the wall while holding power and volume down. I would try it. I'm not too familiar with flashtool on XA. I have used it for 3 years with my Z1c and never hard bricked a phone with it. Seems like X series have a little bit different rules, but I don't see why your phone would hard-brick just because you didn't wipe a few partitions... Also good idea to check in with FT thread.

If the computer does recognize it, maybe you need to reinstall your usb drivers. If its not, then u have a big problem with it, before making anything you need to see if there is a way to connect it by Fastboot, and install his custom TWRP. if u are able to do that, there is a sollution for you.
Remember always to install your usb flash drivers, and the fastboot drivers too.

Same problem my XA F3113 is dead. The LOG says everything was ok but after disconnect it from PC the phone dies.
Look like exist a way to get it back to life but we need the SCATTERED FILE.
Can somebody share us the SCATTERED FILE of this Model?

Really appreciate this guy....
Awesome person. He had recover my dead XA ultra through online. Just with 500 INR.
wrundawan said:
Whats app me +918147499618 I can help you to fix your dead phone.
Click to expand...
Click to collapse

i have a same problem
please help. my phone f3113 is dead after downgrade

wrundawan said:
Whats app me +918147499618 I can help you to fix your dead phone.
Click to expand...
Click to collapse
Be careful this guy is a cheater he cheated $30 from me

Who the hell has cheated you?
Check your paypal with your open eyes since you had raised claim on your money inside paypal your money was refunded by them. And I am helpless as I didn't got your money.
mballe francois said:
Be careful this guy is a cheater he cheated $30 from me
Click to expand...
Click to collapse

mtk scatter

Hard bricked LG D686 - Tried with test point method phone is detcted by PC now but...

Well I have tried every way to get my LG D686 up and running again before that let me revise how I got here
1 - i rooted the LG D686 in 2016, it worked well for a year until one day I had got a certification boot error msg on start up and had no access to bypassing that except the download mode
2 i downloaded a firmware for D685 instead and flashed it with LG FLASHTOOL. It got hard bricked. When ever I would connect it to the pc it would just connect and disconnect repeatedly. it would not turn on or go in recovery or download mode nothing
3- then i tried to use this method here https://forum.xda-developers.com/optimus-g-pro/help/exclusive-solution-lg-d686-dead-flash-t3330691 . I opened the phone managed to short the resistor to ground and got the PC to recognize the phone in mtk mode. Used SP flash tool flashed it successfully but the phone still wont turn on and even tried a hard reset.
4 - I only want to know if its bricked for good or is there still a chance. The mobile repair shop says hardware and software is gone for a toss , will cost allot to fix, however that was before i tried the testpoint method here https://forum.xda-developers.com/optimus-g-pro/help/exclusive-solution-lg-d686-dead-flash-t3330691. Since I was able to short the resistor on the mother board now the pc detects my phone and never disconnects (in MTK mode) which is a good thing ( i have closed the phone so for now its assembled, i have been able to do a format/downlad 100% successfully with the phone assembled
Do I have a bricked phone for good ? or is there any chance?
I have also attached photos of my progress but my phone will never turn on be it fastboot mode , recovery mode, hard reset, no vibration too. Once I even kept the phone charged for a whole night and checked the battery voltage with a multimeter and it says about 90% charge again that was before i tried this test point method, now if i keep it charged on the charger adaptot the back of the phone right near the sim card slot is never warm as before. its cool which i feel its not being charged now. but if its connected to the PC yes , the area near the simcard slots is warmer, so i guess its getting charged.
I have d686 scatter firmware files from A_1st™ Support Team
I have SP flash tool (tried latest one as well however this version works well for scanning emmc.txt)
drivers are detected properly on PC . i have attached an image for that as well
I apologize if creating this thread is breaking any rule violations but there was no reply on the page/ thread i was seeking help for hence I thought I will start a new thread
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Any one have any idea the hardware needs replacement ???

Is this phone to old for an answer ? Just a simple yes or no . Is it bricked for good that the mother board needs to be replaced ? Or is there a chance I can recover it ?

ONEPLUS 8T DEAD

My Oneplus 8T is in edl mode only. Cannot boot to rom, cannot boot to fastboot. Just black screen in edl mode. When using msm tool it showing error of "open serial device failed". Please help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Have you tried holding Volume up and power until it reboots? That is how I got out of EDL mode.
For the error, have you tried different USB ports? I ended up having to use a USB 2 port on the back of my motherboard before it would work. But I got different errors then you.

Qnorsten said:
Have you tried holding Volume up and power until it reboots? That is how I got out of EDL mode.
For the error, have you tried different USB ports? I ended up having to use a USB 2 port on the back of my motherboard before it would work. But I got different errors then you.
Click to expand...
Click to collapse
I've try holding that combination. Still it boots back to edl mode
Tried both 3.0 and 2.0 same error "open serial device failed" and "automatic detection of DDR failed"

That looks like that your Phone is not listed correctly in Device Manager. Look in Device Manager on your PC whether your Phone is listed as QDLOADER 9008. If it is liested as QHUSB_BULK, then you need to update the Qualcomm driver

I am fairly certain the phone is okay but the drivers on the computer you're using are not.

Ayemnaim said:
My Oneplus 8T is in edl mode only. Cannot boot to rom, cannot boot to fastboot. Just black screen in edl mode. When using msm tool it showing error of "open serial device failed". Please help me
View attachment 5177023
Click to expand...
Click to collapse

Install these drivers on your Windows..It worked for me..

I'm having this same issue. I've tried all USB ports including 2.0 as people are recommending. I've installed the Qualcomm USB driver as well. It shows up as HS USB QDLoader 9008 but still I can't seem to get it working. I am trying to flash the global ROM on my sim unlocked T-Mobile OnePlus 7T

Sack206 said:
I'm having this same issue. I've tried all USB ports including 2.0 as people are recommending. I've installed the Qualcomm USB driver as well. It shows up as HS USB QDLoader 9008 but still I can't seem to get it working. I am trying to flash the global ROM on my sim unlocked T-Mobile OnePlus 7T
Click to expand...
Click to collapse
Wrong forum tho.

xocomaox said:
Wrong forum tho.
Click to expand...
Click to collapse
I was focused on the "open serial device failed" issue because that's the problem I'm stuck at. Sorry, nvm my post

Question Poco x3 Pro Hardbricked!

after i got into Fastboot Mode for a Longtime about 30mins.. my Phone got blackscreen and no sign of Light even in Notification Light. i tried to turn it on holding the Power Button for about 30sec or more it doesnt do anything.. soo i go to Device Manager and i see in ports that the Phone is detected with labaled name "Qualcom SDH 9008" and installed MiFlash Tool, and i was trying to Flash it when i press Refresh it detects as "COM3" after searching on YouTube for lot of many ways i didnt find any solution like FireHose File to bypass MiFlash Auth. but i didnt see anything for Poco x3 Pro. no luck!
i already TestPoint the back of the Phone but the only Prob is the Auth thing in account to Proceed to Update firmare file .tgz
can someome help me pleaseee its been Day 4 of searching and still no luck! my Phone is sleeping for 4days now. and i dont have any Phone. im from Philippines by the way.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

PHnambawan said:
after i got into Fastboot Mode for a Longtime about 30mins.. my Phone got blackscreen and no sign of Light even in Notification Light. i tried to turn it on holding the Power Button for about 30sec or more it doesnt do anything.. soo i go to Device Manager and i see in ports that the Phone is detected with labaled name "Qualcom SDH 9008" and installed MiFlash Tool, and i was trying to Flash it when i press Refresh it detects as "COM3" after searching on YouTube for lot of many ways i didnt find any solution like FireHose File to bypass MiFlash Auth. but i didnt see anything for Poco x3 Pro. no luck!
i already TestPoint the back of the Phone but the only Prob is the Auth thing in account to Proceed to Update firmare file .tgz
can someome help me pleaseee its been Day 4 of searching and still no luck! my Phone is sleeping for 4days now. and i dont have any Phone. im from Philippines by the way.
View attachment 5333005
Click to expand...
Click to collapse
Listen to me carefully extract the .tgz file in a folder and download platform tools from the web and also extract platform tools files also in the same folder where you extracted the .tgz files after keeping both file extraction in a folder then turn your phone in. Fastboot mode and plug in and run the flash all .bat file it gonna take around 10-15 minutes and your device will recover

Did it solve your problem??

You are most likely in EDL mode. In order to get out of it, you need to snap off the battery and connect it back. Perhaps no flashing is needed

You can try to find authorized user patch for miflash somewhere on net but don't get your hope up as poco is relatively new

oleg.ignatov2011 said:
You are most likely in EDL mode. In order to get out of it, you need to snap off the battery and connect it back. Perhaps no flashing is needed
Click to expand...
Click to collapse
Does this method really work? im on Redmi Note 9 Pro, Hardbricked as well, and also stuck at edl authentication ehrn attempting to flash fastboot rom

oleg.ignatov2011 said:
You are most likely in EDL mode. In order to get out of it, you need to snap off the battery and connect it back. Perhaps no flashing is needed
Click to expand...
Click to collapse
Does This Method Work? Im on Redmi Note 9 pro hardbricked as well, I Also cant get past to Edl Authentication

Did you resolve the issues. and method used. I am also stucked in the same.
kiyookusanagi said:
Does This Method Work? Im on Redmi Note 9 pro hardbricked as well, I Also cant get past to Edl Authenticatio
Click to expand...
Click to collapse

If your computer is detected as QH 9008 or similar, it seems to be more of a hardware fault than a software one, since it indicates that the CPU is not having good communication with the UFS memory.

PHnambawan said:
i already TestPoint the back of the Phone but the only Prob is the Auth thing in account to Proceed to Update firmare file .tgz
Click to expand...
Click to collapse
How did you do this?
Can you explain the process step by step, pls.
I've tried with several different ways but no one works. Phone isn't getting in EDL.

Oneplus 8 fastboot only

I have a t mobile variant that is sim unlocked and bootloader unlocked.
I wanted to convert to a Global version however it failed because I apparently had the wrong oem software.
I used all in one tool which worked great for everything else I needed but here is the problem; I can only boot into fastboot mode and crashdump mode. When using all in one tool I chose to wipe the device before installing the new software
I also cannot get into EDL Mode to use the Msmdownload tool even though the correct drivers are installed to use this tool.
Anyway out of this? Thanks...
Aslo; I have tried fastboot commands with no luck...

You need to msm using edl. If you are bl unlocked, flash a custom ROM to get booted and maybe try again using proper tool?
Also, try different USB ports, cables, etc. You should be able to boot into edl with hw keys and connect to msmtool

As I stated I can not get into edl, I tried all the the other things also, cables, ports. I did not know I could have flashed a custom rom at this point, phone was not rooted either...
Oneplus has it now for repair, they are about 300 miles from me, or the service center is?

Gabriel51 said:
As I stated I can not get into edl, I tried all the the other things also, cables, ports. I did not know I could have flashed a custom rom at this point, phone was not rooted either...
Oneplus has it now for repair, they are about 300 miles from me, or the service center is?
Click to expand...
Click to collapse
Not sure if you got this fixed but boot into fastboot, the use "fastboot boot" to boot into AICP Recovery. Within recovery eanble ADB, then "adb reboot edl". EDL mode is just a black screen and your phone will exit it and try to boot after a few seconds if the drivers are not installed so its easy to miss. If your phone can boot into fastboot it can boot into EDL.

I do not see that feature listed? Phone would not boot into normal recovery, it went right back into fastboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Also if you had read through the posts you would know that I already sent it to 1+ for repair, they have had it a couple of days...

OnePlus repaired my device for nothing which is nice however It's now sim locked and at first try T-mobile says this device does not qualify for unlock!!! T-mobile also said they are looking into it because it was previously unlocked and it may take a week to get a reply.
I called OnePlus and their response was it's not our problem (more or less) I sent them a unlocked phone and they completely ignored my request to load the global software on this device, they did what they wanted to, they could have contacted me at any time..THANK YOU OnePlus.