I'm really new to all of this so sorry for the ignorance. I'm trying to revert my OP8T KB2003 back to OxygenOS and get rid of Lineage and TWRP. Can't seem to find a proper tutorial on how to do that. Any help would be greatly appreciated.
You can revert via MSM tool.
Rootk1t said:
You can revert via MSM
Click to expand...
Click to collapse
Thanks for the reply. So I tried the different firmware and followed the instructions, but it doesn't seem to be able to pick up the phone. I'm holding down both volume buttons for a few seconds before plugging it in. Does the bootloader being unlocked have something to do with it? If so i'm unsure how to lock it again.
rando_lando said:
Thanks for the reply. So I tried the different firmware and followed the instructions, but it doesn't seem to be able to pick up the phone. I'm holding down both volume buttons for a few seconds before plugging it in. Does the bootloader being unlocked have something to do with it? If so i'm unsure how to lock it again.
Click to expand...
Click to collapse
Does the phone show in device manager as Qualcomm HS-USB QDLoader 9008?
If yes, try entering edl mode again.
If no, you need to install the Qualcomm drivers.
Rootk1t said:
Does the phone show in device manager as Qualcomm HS-USB QDLoader 9008?
If yes, try entering edl mode again.
If no, you need to install the Qualcomm drivers.
Click to expand...
Click to collapse
It shows up as QUSB_BULK How would I go about installing the drivers?
I also wasnt able to start the MSM Tool with pushing Buttons. If drivers are correct you should Google Boot edl Mode via ADB command. This worked for me.
There is a good thread in the "guide" section that could make it alot easier for you.
[ROM][STOCK][FASTBOOT] Stock OxygenOS Fastboot ROMs For OnePlus 8T
Ever wanted to unbrick your device or switch to stock ROM from a custom ROM without using MSM Unbrick tool and keeping your bootloader unlocked after that well fastboot ROMs are here to help you 😉. I have extracted all images from the stock zip...
forum.xda-developers.com
I'm also trying to get back to oos from derp. Can't I just use the flashable beta zips using twrp and then format data?
Related
Bricked my phone... Can only boot into fastboot, and cannot connect to msm tool. Please help. This is the first time in 12 years of tinkering I have ever turned a phone into a paperweight
kinkoff85 said:
Bricked my phone... Can only boot into fastboot, and cannot connect to msm tool. Please help. This is the first time in 12 years of tinkering I have ever turned a phone into a paperweight
Click to expand...
Click to collapse
The MSM tool thread has everything you need and the instructions in the OP are very good.
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
PS: if you can get into bootloader, then your phone is obviously not bricked.
It won't go
BillGoss said:
The MSM tool thread has everything you need and the instructions in the OP are very good.
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
PS: if you can get into bootloader, then your phone is obviously not bricked.
Click to expand...
Click to collapse
It won't load anything but fastboot
If phone won't connect in EDL try using different usb port on your pc. Works a lot of the time.
Have you disabled the driver signature, are you have the latest Qualcomm drivers and the latest OnePlus drivers ?
kinkoff85 said:
It won't go
It won't load anything but fastboot
Click to expand...
Click to collapse
We can't see your phone or what you've done unless you tell us. Why don't you describe in detail what you did and what happened.
BillGoss said:
We can't see your phone or what you've done unless you tell us. Why don't you describe in detail what you did and what happened.
Click to expand...
Click to collapse
I tried flashing a custom ROM based off Pixel and android 12... It rebooted and went straight to fastboot and that's the only place it will go is fastboot. I later read that rom was not compatible with the 8t only the 8 and 8pro. Whenever I try to connect it with MSM TOOL it simply reboots right back into fastboot. I do have TWRP recovery installed but cannot figure how to flash or side load from there either. I've tried over and over.
When you're in fastboot, flash TWRP and then boot into recovery.
BillGoss said:
When you're in fastboot, flash TWRP and then boot into recovery.
Click to expand...
Click to collapse
There is nothing to flash once in recovery.
You'll have to format data (wipe>format data: type 'yes') and then sideloaded what you want to flash.
Try these fixes mentioned in these videos
and
especially the tips from the second video, helped me once I couldn't get into edl mode.
So, I flashed LineageOS recovery and installed LineageOS.
This was very buggy for me so I want to go back to stock OxygenOS (11).
I cannot for the love of everything that is holy figure out how to do this.
I downloaded OOS ROMs but I cannot sideload them on the Lineage Recovery.
Also I tried MSM Tools, but this staight up just won't start.
Anyone has a tutorial for me or can tell me what I'm doing wrong?
Fuwlz said:
So, I flashed LineageOS recovery and installed LineageOS.
This was very buggy for me so I want to go back to stock OxygenOS (11).
I cannot for the love of everything that is holy figure out how to do this.
I downloaded OOS ROMs but I cannot sideload them on the Lineage Recovery.
Also I tried MSM Tools, but this staight up just won't start.
Anyone has a tutorial for me or can tell me what I'm doing wrong?
Click to expand...
Click to collapse
Hello, did you follow the instructions here: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.3954325/
?
Yes, MSM tools just doesn't work
Me too, I can't start this EDL mode, it just goes straight to fastboot.
I did it! I finally was able to use the EDL mode and MSM tool by using an old laptop that had USB2 ports! The laptop I was using had only USB3. After I've installed the Qualcomm drivers on the second laptop, EDL mode started as explained in the guide and MSM found it immediately.
Hope this helps.
WookieTookie said:
I did it! I finally was able to use the EDL mode and MSM tool by using an old laptop that had USB2 ports! The laptop I was using had only USB3. After I've installed the Qualcomm drivers on the second laptop, EDL mode started as explained in the guide and MSM found it immediately.
Hope this helps.
Click to expand...
Click to collapse
Hi,
Just experiencing the same. I would like some help pls !
Tried LineageOS. Not stable enough on OP7 so I want to go back to OOS.
Got OnePlus 7 - 1903 model EU, so I believe it's GM57BA that I have to deal with.
Tried fastboot methods, not successful. I followed this post. Tested this on linux.
Encountered "Flashing is not allowed for Critical Partitions" even though I got :
Code:
❯ fastboot flashing unlock
FAILED (remote: ' Device already : unlocked!')
fastboot: error: Command failed
❯ fastboot flashing unlock_critical
FAILED (remote: ' Device already : unlocked!')
fastboot: error: Command failed
Device was stuck during boot (left it about an hour to try, nothing happened).
At some point I faced Qualcomm Crashdump Mode Screen.
Now I think the only option is to go for MSM method but not available for linux, so I switched on windows.
Instructions on this post seem pretty clear but when I plug the phone on PC, device is not recognized, don't know why I can't install phone driver properly (but probably not important at this stage).
Qualcom drivers are installed but I can't get my phone to boot on "EDL mode" ?
vol - and vol + while shutting down/powering on the device, plugged/unplugged to PC (tried few combos).
So device is not recognized and I can't run MSM Enum.
I have probably missed something... if anyone could give a hint on how to do that, I would greatly appreciate it.
Ok so I finally found a way to solve my issue.
Followed instructions from this video.
Basically I had to disable driver signature enforcement on my pc. This allowed me to properly boot on EDL and detect the device using MSM.
Hope this will help
i need OP8 in2019 verizon flash file i flash global rom but want to back verizon
BL also unlocked so is there fastboot rom etc?
[OP8][OOS VZW 67CD] Unbrick tool to restore your device to OxygenOS
My phone shows up as IN2019, I don't see where it would be QDLOADER 9008 or QHUSB_BULK. I can't get into EDL. What should I try next? I tried fastboo and ABD nothing gets it into edl
forum.xda-developers.com
FoxyDrew said:
[OP8][OOS VZW 67CD] Unbrick tool to restore your device to OxygenOS
My phone shows up as IN2019, I don't see where it would be QDLOADER 9008 or QHUSB_BULK. I can't get into EDL. What should I try next? I tried fastboo and ABD nothing gets it into edl
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks alot bro I'll try it tomorrow
FoxyDrew said:
[OP8][OOS VZW 67CD] Unbrick tool to restore your device to OxygenOS
My phone shows up as IN2019, I don't see where it would be QDLOADER 9008 or QHUSB_BULK. I can't get into EDL. What should I try next? I tried fastboo and ABD nothing gets it into edl
forum.xda-developers.com
Click to expand...
Click to collapse
Bro is there any fastboot rom for this?
Mr Hassan said:
Bro is there any fastboot rom for this?
Click to expand...
Click to collapse
No, I promise MSM will work, you just need to figure out the drivers.
FoxyDrew said:
No, I promise MSM will work, you just need to figure out the drivers.
Click to expand...
Click to collapse
The problem is not in your file problem is in my device i was flashed another file or param now when i try ti flash it its giving param mismatch etc error
Even i flash vzw param via FB then i get smt error and still not able to flash
I have only way now is FB rom to fix it
FoxyDrew said:
No, I promise MSM will work, you just need to figure out the drivers.
Click to expand...
Click to collapse
Why i want to back vzw? Coz my device is no service issue i need to back stock rom then need to check is it in network lock or what
I accidentally installed the wrong ROM on my phone, and now it's unresponsive (nothing happens when I try to turn it on, not even a vibration)
But I managed to access Download Mode (aka EDL, right?).
Can I restore it if I have the Scatter file and the Stock ROM?
Thanks in advance
MediaTek devices have preloader mode, EDL mode is for Qualcomm
Not sure what device you're talking about, but try to look for an "unbrick tool" or an "unbrick guide"
I "semi hard-bricked" my OnePlus 3T a while ago, and there was this leaked Qualcomm tool that you could use to flash the factory ROM the phone came with from Download Mode.
aIecxs said:
MediaTek devices have preloader mode, EDL mode is for Qualcomm
Click to expand...
Click to collapse
Does the fact that I can communicate and flash via Download Mode (SP Flash Tool) mean that I didn't lose my preloader? I'm kinda stuck trying to flash the Stock ROM (demanding verified image files, even though I'm using the original firmware for flashing... probably)
Lada333 said:
Not sure what device you're talking about, but try to look for an "unbrick tool" or an "unbrick guide"
I "semi hard-bricked" my OnePlus 3T a while ago, and there was this leaked Qualcomm tool that you could use to flash the factory ROM the phone came with from Download Mode.
Click to expand...
Click to collapse
I'll check the guides online, hopefully I'll find one that'll help.
mouradsme said:
demanding verified image files, even though I'm using the original firmware for flashing
Click to expand...
Click to collapse
I've also had issues previously with trying to flash stock images on Samsung phones. Not sure if you have country-specific images, if you do, try giving all of them a shot. I'm from Hungary, and a locally bought Samsung phone only came to life after flashing a Spanish factory image.
you need to (by)pass SLA/DAA authentication
Now I managed to bypass protection, and got the successful flash message from SP Flash Tool.
But I still can't solve the issue (Phone still only responsive from BROM)
For reference I'm using the global version of RMX3171 (Realme Narzo 30A) based on MT6768, and the Stock ROM is available online.
I flashed every partition (Provided in the Stock ROM), and Now it is booting, showing the logo + a message "Download not completed Error Code 0x992566 " and then it reboots after a minute or so -_-
I think that means you did not flash all partitions (some not included in Download)
In the other thread someone mentioned "Format All + Download" very bad idea never do this.
did you try unlocking bootloader from mtkclient like suggested in that thread?
mouradsme said:
Hello,
Can someone share their nvdata & nvram + oppo_custom?
I seem to have formatted mine, and need them to recover my Narzo 30A.
Click to expand...
Click to collapse
https://androidmtk.com/use-sn-write-tool
https://www.hovatek.com/forum/thread-116.html
aIecxs said:
https://androidmtk.com/use-sn-write-tool
https://www.hovatek.com/forum/thread-116.html
Click to expand...
Click to collapse
I came across the tool, but I failed to enter into Meta Mode.
I'm trying to make my phone boot to the system, then I'll try restoring my IMEI's using MTK Engineering app.
Thanks for links though
mouradsme said:
I accidentally installed the wrong ROM on my phone, and now it's unresponsive (nothing happens when I try to turn it on, not even a vibration)
But I managed to access Download Mode (aka EDL, right?).
Can I restore it if I have the Scatter file and the Stock ROM?
Thanks in advance
Click to expand...
Click to collapse
There is no such thing as a "hard bricked" device that can still boot into TWRP. A hard bricked device is completely dead and shows no kind of activity or function. It won't charge, it won't boot into any kind of mode and can't make a connection to PC, makes no sound when connecting to PC and it won't appear in device manager when connected to PC.
A device that can boot into download mode but not its other modes is just a softbricked device.
Good day!
Is there any way to get the official OnePlus 9 T-Mobile (LE2117) OxygenOS zip file? Android version does not matter (11 or 12).
I want to install it by:
adb sideload <file>.zip
Click to expand...
Click to collapse
I found official OOS from the OnePlus website, but it has only global version. (BTW I was able to sideload it and it works)
PS: I found the MSM Download Tool for it, but I'm having trouble with installing it, as it is stuck on "Waiting for device". Although I installed Qualcomm HS-USB QDLoader 900 driver.
Thank you!
You'll need this driver for MSM to work.
Also you need to boot to EDL: Power off, Hold down both vol up and down, connect device to USB. Then click enum in MSM and the device will show up.
FYI it'll only work with USB 2.0, anything else will fail on donwloading super.img.
c0d3f0rc37 said:
Good day!
Is there any way to get the official OnePlus 9 T-Mobile (LE2117) OxygenOS zip file? Android version does not matter (11 or 12).
I want to install it by:
I found official OOS from the OnePlus website, but it has only global version. (BTW I was able to sideload it and it works)
PS: I found the MSM Download Tool for it, but I'm having trouble with installing it, as it is stuck on "Waiting for device". Although I installed Qualcomm HS-USB QDLoader 900 driver.
Thank you!
Click to expand...
Click to collapse
How did u sideload global rom
rizzmughal said:
How did u sideload global rom
Click to expand...
Click to collapse
I wanted to install StagOS as shown here. After booting into recovery mode I found out that I can easily sideload zip file. So, instead of StagOS file I used OxygenOS one.
Note: my phone's bootloader is unlocked.
_MartyMan_ said:
You'll need this driver for MSM to work.
Also you need to boot to EDL: Power off, Hold down both vol up and down, connect device to USB. Then click enum in MSM and the device will show up.
FYI it'll only work with USB 2.0, anything else will fail on donwloading super.img.
Click to expand...
Click to collapse
I was hoping to find the official zip file and install it the easy way. But, I think the MSM is the only way for now. So, will try your guidance. Thank you!
Thread 'Tmobile 11.2.8.8 msm' https://forum.xda-developers.com/t/tmobile-11-2-8-8-msm.4504361/