I have installed incremental upgrades for 9.0.2 and 9.0.3 and been able to do a TWRP less root using Magisk. For the upgrade to 9.0.4 I downloaded and installed the full upgrade. Following installation of oos_9.0.4_patched_boot.img, my phone reboots to recovery so I am unable to load Magisk. So I have to reinstall oos_9.0.4_stock_boot.img and stay unrooted. I can't find a similar problem - am I unique? Any solutions?
Solanoantuna said:
I have installed incremental upgrades for 9.0.2 and 9.0.3 and been able to do a TWRP less root using Magisk. For the upgrade to 9.0.4 I downloaded and installed the full upgrade. Following installation of oos_9.0.4_patched_boot.img, my phone reboots to recovery so I am unable to load Magisk. So I have to reinstall oos_9.0.4_stock_boot.img and stay unrooted. I can't find a similar problem - am I unique? Any solutions?
Click to expand...
Click to collapse
Flash Full OOS via fastboot (Guide: https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665 )
Then use fastboot to enter twrp blu_spark (TWRP: https://forum.xda-developers.com/devdb/project/?id=27466#downloads )
Then flash magisk (Magisk: https://forum.xda-developers.com/ap...k-v7-universal-systemless-t3473445?styleid=21 )
After magisk installed, reboot phone and install magisk app
Done.
PeterSmusi said:
Flash Full OOS via fastboot (Guide: https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665 )
Then use fastboot to enter twrp blu_spark (TWRP: https://forum.xda-developers.com/devdb/project/?id=27466#downloads )
Then flash magisk (Magisk: https://forum.xda-developers.com/ap...k-v7-universal-systemless-t3473445?styleid=21 )
After magisk installed, reboot phone and install magisk app
Done.
Click to expand...
Click to collapse
My apologies for the late reply. I'm not heavily into these things so I was reluctant to go into TWRP. So I ended up resetting my phone and now it all roots quite happily. But thanks for the ideas.
hii i have one plus 6 oxygen 9.0.6 but am not able to find out patched file
image
Deleted
After recently bricking my Oneplus 6 by trying to flash the latest TWRP on the latest Android 10 OTA from Oxygen Updater, I found a post from official TWRP explaining how root with a10 will take a while to implement due to changes that Google has made to their partitions.
So I guess for anyone trying this out on their own, be warned. You will probably end up bricking your device like I did and will probably end up having a bad time.
Please correct me if i'm wrong though, peace!
Edit: can confirm fastboot flash boot twrp-3.3.1-11-enchilada-Q-mauronofrio.img from the other popular post is working!
If you already have a working TWRP on OOS 9 you should be fine as long as you flash a working TWRP afterwards. Blu_spark TWRP 9.101 is compatible (please not 9.101 no earlier version will work).
Also don't use Magisk 20 only 20.1.
There is already a pre-patched version out there. You can fastboot flash it (as fastboot boot doesn't work). An easier way (without a pre-patched version) is currently being worked one as you pointed out already
just updated to a10
boot into twrp, flash new bluspark twrp
flash FULL ota a10 image
reflash twrp
reboot into twrp
boot into system
boot back to twrp
install magisk 20.1
a10, twrp and root working
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
nightfury04 said:
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
Click to expand...
Click to collapse
havent lost data and you can root again
Blu_spark twrp
could you please provide link for blu_spark twrp img, zip files that work with android 10?
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
nightfury04 said:
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
Click to expand...
Click to collapse
nope
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
akri1337 said:
nope
Click to expand...
Click to collapse
It would be of great help if you could provide link to working TWRP with android 10.
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
akri1337 said:
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
Click to expand...
Click to collapse
Which build did u use mate? R108 is not working with android 9, I tried flashing it using my older installed twrp.
It says unsupported android version. And in github r108 says only for android 10.
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
akri1337 said:
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
Click to expand...
Click to collapse
Thanks again mate.. I will give this one a try.
there is a problem with Magisk 20.1, after all flashes the system is booting ok with Magisk working but after I give first program root access and rebooting its stuck on bootloader and not booting to system.
nightfury04 said:
Thanks again mate.. I will give this one a try.
Click to expand...
Click to collapse
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
nightfury04 said:
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
Click to expand...
Click to collapse
Which magisk? Ver 20.1 ?
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
GunFishin said:
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
Click to expand...
Click to collapse
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
chetbiz said:
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
Click to expand...
Click to collapse
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
GunFishin said:
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
Click to expand...
Click to collapse
Yes, you will need to flash twrp with adb and going through the hole process of installing twrp and magisk, but for me its not worked well, after first boot to Android Q with magisk 20.1 and granting some apps root access when I rebooted the phone its not booting to system and going to bootloader, I think its related to some problem with magisk 20.1.
Hi
Just looking at rooting and installing twrp and magisk on one plus 7 pro new phone
Can you install twrp and magisk on android 10?
Yes you can. you need the unofficial twrp (version 3.3.1-70, 71 or 72). Magisk will work just fine. It is just a bit painful when you update your phone with a OTA because you will lose root.
haverlok said:
Yes you can. you need the unofficial twrp (version 3.3.1-70, 71 or 72) Magisk will work just fine. It is just a bit painful when you update your phone with a OTA because you will lose root.
Click to expand...
Click to collapse
can you not just Install Magisk to Inactive Slot after OTA? Then you shouldn't lose root after an update.
uhlme said:
can you not just Install Magisk to Inactive Slot after OTA? Then you shouldn't lose root after an update.
Click to expand...
Click to collapse
yes, that's right. You also need to get twrp retention scrip Magisk module flashed after the OTA so you don't lose twrp.
I am currently on 9.5.9 GM21BA, twrp and magisk installed, bootloader unlocked.
What would be the best way to upgrade to stock 10.0.3, install smurfkernel and xxxnolimits magisk rom?
I would like to do a clean install, wipe all my data first.
Thanks
{s3rious} said:
I am currently on 9.5.9 GM21BA, twrp and magisk installed, bootloader unlocked.
What would be the best way to upgrade to stock 10.0.3, install smurfkernel and xxxnolimits magisk rom?
I would like to do a clean install, wipe all my data first.
Thanks
Click to expand...
Click to collapse
u answered your own question!
Hello guys,
I got a OnePlus 7 pro
I am with the version 11.0.0.2 rooted with a modified boot.img
There is a way to update my phone to 11.0.2.1 without losing my data and the root ?
Thanks
Uninstall magisk reflash stock boot.img with backup or from 11.0.0.2 rom zip.
Then update to 11.0.2.1
Then reinstall magisk and reflash modified boot.img of 11.0.2.1
prad1po said:
Hello guys,
I got a OnePlus 7 pro
I am with the version 11.0.0.2 rooted with a modified boot.img
There is a way to update my phone to 11.0.2.1 without losing my data and the root ?
Thanks
Click to expand...
Click to collapse
Download oxygen updater
Download full stable build on your 7 pro version latest version
Once downloaded go to your setting and system update
Select local upgrade, wait til the update finishes but DO NOT RESTART
Once the update reaches to 100% go to Magisk
Select Magisk install
Select install to inactive slot (after ota)
Watch magisk load and NOW YOU CAN REBOOT
Hello thank you very much
This method is working