my ungle gived me 4 phones to fix 1 isn't android, 1 doogee mix, 1 alcatel (unknow model), and an samsung sm-g3502t, this samsung is stuck in qualcomm hs-usb qdloader 9008 mode I think it's EDL emergency download mode, I googled and I find an program than recognizes it, but it needs block 0 to download, but I didn't find, I downloaded the stock rom but nothing, odin didn't recognize it
there is someway to save it?
please
I fond something while testing in my other phone, you can do d if=/dev/block/mmcblk0 of=/sdcard/gpt bs=8 count=10000 skip=0 and use the file that is generated to create rawprogram0.xml and patch0.xml but I still need a identical phone to do it
now I discovered that this phone is hard bricked, the problem is not software, because it's freezing when try to flash it.
So I need to investigate what part is faulty to fix it
Related
In SP Flash Tool (v3.1304.0.119, seemingly the latest I can find out there) I get the following, no matter which function I perform:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
Err msg box pops up right after RED 100% (no subsequent yellow & green)
Is this likely a hardware failure or is there any possibility of rescuing via SW means.
Worse case scenario I'll have to send to back to CHN.
Thanks for any input you may offer.
i've same problem
help me too
I've got the same problem : I erased my preloader (I can't use "Preloader-->DA" any more to brush a ROM). Now, I'm looking how to boot on "ROM-->DA". On a MT6577, it's easy : you put the battery without power on the phone, you connect USB cable, you run your brush software ("SP flash tool" or "SP_MDT"), you remove the battery... and the brush begin. But on MT6589, it doesn't work
If someone has a solution...
@crkmanho: your phone got recognized as mt5xx preloader, so it isn't bricked. you`ll need to get the correct firmware for your device and make full download. did you made a backup of your running firmware? No? Haha. next time think about it before just flashing random FW to your device. also, check in your driver settings that you have assigned vcom port 1-16 to mt65xx preloader. sometimes preloader is recognized (vcom 7 or something) bt other device drivers are offset (27 or something) wich will work for connecting your device to PC, but not flashing through SP Flash Tool.
@ManuD_Linux: is your device recognized by your PC? if so, same thing. if it is completely dead, google for "mt65xx testpoint" or something similar. not every phone got one, but many. you can connect the testpoint to GND and the phone will "boot" into preloader. those devices are almost unbrickable.
Chrizzly92 said:
[...] @ManuD_Linux: is your device recognized by your PC? if so, same thing. if it is completely dead, google for "mt65xx testpoint" or something similar. not every phone got one, but many. you can connect the testpoint to GND and the phone will "boot" into preloader. those devices are almost unbrickable.
Click to expand...
Click to collapse
I find a solution !!! It certainly will help someone. If you totally brick your Lenovo A820 (no or bad preloader), simply brush (with "SP flash tool") this preloader : http://desvigne.org/divers/firmwares/Preloader_a820.7z
After, all become possible ! You can brush an original firmware with a flash tool, and bruch TWRP, install a custom firmware....
Hope it helps someone... (the Lenovo is really unbrickable ).
Manu
last month, I flash Xenuis9 CM13 for andriod 6.0, alomost use it about to 2 month, last thursday, cause my phone only few power, so I change my spare battery to keep using, but suddenly My phone cant dipslay any thing by pushing power botton, I push power button this monitor just skip a moment not display any logo or something. later I plug USB cable to computer, this hardware manager show"QHSUSB_bulk", and I follow google god to install qualcomm driver, then there display "Qualcomm HS-USB Diagnostics 9006" on hardware manager ,addtion to occurs many unformating disk on my computer ,and then I searching method to try solve its during one day. I plug this USB to P/C, then display it,
and I try to my best to solve its, use LG boardDiag v2.99a and flash original extract ToT files, but cant success it.
AP test was pass, but EMMC always fail in rpm partiotion fail.
is it possible to repair it throungh flash firmware or software by myself? I really like this phone G pro 2. hope LG launch new Pro series in Taiwan
:crying::crying::crying::crying::crying::crying::crying::crying:.
my oneplus one is hard bricked. i tried several tools to recover my OPO, sadly nothing worked. The problem i've figured out is, that after flasing the 8974_msimage.mbn image my phone disconnects (sound from windows), reconnects again and the msm8974 download tool starts again. so i'm stuck like in this video:
The Qualcomm Flash image loader doesn't give me an error message (i can flash everything - i did so with Color.zip and with OPO Recovery Tools files), but still i get no vibration, no led light or anything else from the phone.
so what can i do for now? that's actually not my first android phone which is hard bricked (i helped a lot of friends of mine and i'm computer scientist as well....), so can anyone, please, help me!!!!
regards
markus
Hello all,
I'm new here, and I searching since many time a solution for my issue.
I'm technician for a company in France, that import professional PDA's from Korean. These devices are strong, and a little "expensive"... So when a customer send me a device for RMA, I need to found the best way for solve the issue, without change parts.
At this time, I'm facing to the issue below :
Lot of devices come in RMA because they can't boot. When I plug the device to my computer, I see Qualcomm HS-USB QDloader 9008 in port COM list.
For the manufacturer (we work direclty with him, no "intermediary"), the only way is to change the main board. OK but I'm not stupid, and I konw that they want sold main boards
I know that the main board is bricked and the device boot in EDL mode, no command can't be send (ex adb), and no screen boot.
Impossible to acces to the bootlader with touch combination.
I have the OS files on my computer (boot.img, emmc_appsboot.mbm, rpm.mbn, NON-HLOS.bin etc...)
The CPu is MSM8916, so I tested with QFIL and Miflash to send send files but nothing good :/ MiFlash told me that the "device is busy", and QFIL told me that there is a Sahara fail error".
So my question is : Can I save the main boards ? I think that there is some people here with more competent than me
For information, I have try 1 year ago with Miflash, and I saved only ONE board with Miflash and Xiaomi OS (I try the OS of the redmi because this phone work with the same CPU) ............. Only one file of the OS was sent by Miflash (before a crash of Miflash), but the main baord was save ^^ So I think that it is really a little problem, maybe an only one partition corrupt ....
I can take pictures of the board if needed.
Greetings everyone. I didn’t find a thread for this specific phone model. So I am putting it up here. Few days back I decided to unlock the bootloader of my LG W41 (LM-K610IM) and upgrade to a custom ROM. So, I used fastboot mode to unlock the bootloader and up until now everything went like a dream. Problems started when I couldn't get a TWRP recovery for my specific model. I downloaded a generic one and first tried to push it to my recovery partition. That's when I learned my phone doesn't have a recovery partition. I don't know what came to me then I used fastboot flash command to flash the TWRP image to my boot partition. It was successful but my phone won't start after that. It was a softbrick. Only the LG logo started bootlooping. But the worse was still not over. In an attempt to restore my device I searched everywhere for the stock ROM as the official website is down, but couldn't find any. At last, I zeroed in on a similar device by the same manufacturer LG K52. It had the ditto hardware like LG W41. Even the model number was similar. So, I downloaded the KDZ file. Extracted the dz from the kdz and the boot.img from the dz using LG KDZ extractor . Made a scatter file using a Hovatek instruction and using WWR MTK tool and formatted my device using SP flash tool and flashed everything. Till now my device was detected by the Windows 11 PC as a LGE device. Anyways the SP tool successfully flashed everything but after that my won't turn on any more. It's total dead. It won't power on, pc won't recognize it. I have tried connecting using USB and all possible hardware key combinations. It is dead bricked I think. All because of my stupidity. Now my question is, does it have any hope left or should I throw it away and buy a new device? I am keeping my fingers crossed and hope to find a superhero
Edit 1: SP Flash tool doesn't see my device any more. I have all the specific drivers installed. From LG and from Mediatek.
Try LG Bridge or check lg-firmwares.com
or
buy/borrow second device and 1:1 clone with mtkclient
Thanks for the quick response, but I have already tried LG Bridge, LGUP . After soft brick LGUP was seeing device as "unknown at COM Port 9". After hard brick it doesn't see it any more. Actually my PC won't see the device anymore
The firmware is not available at LG-firmwares.com but I have requested for it there. Keeping fingers
you should be able to repair preloader from bootrom mode (BROM)
How to enter bootrom mode. I am sorry if it is a noob question
Soumyadip999 said:
How to enter bootrom mode. I am sorry if it is a noob question
Click to expand...
Click to collapse
XRed_CubeX said:
To put your device in BRom mode you may need a different key combination or a test point, find out on the internet how to put the device in BRom mode or ask various devs of that device
Click to expand...
Click to collapse
find KCOL0 test point and short to GND
https://forum.hovatek.com/thread-11802.html
Okay let me ask and I will follow up. Thank you for the amazing guidance. Let's see if the poor device could be saved
you should poll lsusb in linux while trying to connect usb with both vol keys pressed. disconnect battery from pcb if possible to ensure phone is off.