new rainbow kernel V1.1
based on a125f latest samsung source
-add dtb.img
-overclock cpu:
-BIG cores 2351 to 2501
-LITTLE cores 1800 to 2000
-CCI 1051 to 1265
-overclock gpu 6800 to 8970
-added CRC32 optimized rountine
-upstream LZ4
-upstream linux string rountine
-added TRANSPARENT HUGEPAGE
-fixed mtp for GSI
-fixed Touch for GSI
-fixed rcu performance
-added optimized checksum rountine
-removed knox and others security features
-added cpufreq governors ondemand and userspace
-added driver power suspend 2.0
-optimized EXT4 partision
-fix touch in gsi
-removed erratum not used
-added jump_label
-kernel optimized for more performance
-and other minor optimizations
-compiled whith proton clang-13/llvm + polly + thinlto + O3 + cortex-a53 optimization
if you think the old version is better you can use
old rainbow kernel v-4.0 (just gsi)
based on a125f old samsung source
- more CPU regulators
- The added XOR throttle of the NEON arm can have a performance increase of up to 20%.
- Added boeffla_wl_blocker driver.
- vector optimizations, matrices, loops, parallelism, GPGPU codegen.
-More aggressive link optimizations.
-VDSO32 enhanced for higher performance in 32-bit applications.
-samsung security disabled.
-kernel optimized with -O3 -Fast (higher performance)
- a memory transparency is activated in fast mode (higher performance)
- optimizations for the A53 cortex (superior performance)
- floating point optimization
- branch optimization
-Fixed touch issue for all gsi panels thanks to RE800T warhammer kernel
- Added power suspend 2.0 driver
-I/O and space performance improvements
- Added wireguard module for greater network security
-optimizations for memcmp
- processor cache optimizations
- Optimizations on EXT4 path for better performance
-small optimizations in the RCU
-LZ4 algorithms have been updated
-fixed kernel compression
- various debugs have been disabled
- memory optimizations
-single extension optimization
-some kernel latencies have been reduced
- Added optimized checksum routine (has a 4x transfer rate increase in A53 cortex)
-other small kernel optimizations for ARM64
-overclocking GPU to 780 MHz
-some changes I don't remember
kernel compiled with clang13 / llvm proton + thinLTO + polly + O3 Ofast + cortex a53 optimization (for better performance)
old Source code:
https://github.com/manteiga25/new-rainbow-kernel
new Source code:
GitHub - manteiga25/rainbow-kernel-samsung-a12
Contribute to manteiga25/rainbow-kernel-samsung-a12 development by creating an account on GitHub.
github.com
Attention this kernel has not been tested yet if you get some installation error or bootloop send me a message.
Manteiga25 said:
Attention this kernel has not been tested yet if you get some installation error or bootloop send me a message.
Click to expand...
Click to collapse
About to test, just have to do a few things.
Thanks for your work!
Just flashed it on a rooted stock rom and it ended in a soft brick.
LAST_krypton said:
Apenas o mostrei em uma sala de raiz e terminou em um tijolo macio.
Click to expand...
Click to collapse
does not work?
Manteiga25 said:
does not work?
Click to expand...
Click to collapse
It does not work. After flashing on a android 11 rooted stock rom, ends up in a soft brick.
Dm-verify and knox disabled.
LAST_krypton said:
Dm-verify and knox disabled.
Click to expand...
Click to collapse
Vou tentar consertar
Translated by GT: I will try to fix
Manteiga25 said:
Attention this kernel has not been tested yet if you get some installation error or bootloop send me a message.
Click to expand...
Click to collapse
Good to see another dev here
physwizz said:
physwizz said:
Good to see another dev here
Click to expand...
Click to collapse
hello i need your help do i have to disable samsung restrictions in kernel to fix bootloop?
Click to expand...
Click to collapse
physwizz said:
Good to see another dev here
Click to expand...
Click to collapse
the kernel i compiled is based on a125U1 does it work on all variants of a12 or only on that variant?
Manteiga25 said:
the kernel i compiled is based on a125U1 does it work on all variants of a12 or only on that variant?
Click to expand...
Click to collapse
Mine is based on a125f.
I had to use a patch to overcome the strcpy error
LAST_krypton said:
Não funciona. Depois de piscar em uma rom de estoque enraizada de android 11, acaba em um tijolo macio.
Click to expand...
Click to collapse
Eu fiz uma nova compilação
Just flashed the kernel, it seems to work. But cpu z reports it like as if i flashed the stock kernel
LAST_krypton said:
Acabou de piscar o kernel, parece funcionar. Mas cpu z relata como se eu tivesse feito o flash do kernel padrão
Click to expand...
Click to collapse
Eu não mudei o nome do kernel, então ele tem o mesmo nome do kernel padrão
Manteiga25 said:
Eu não mudei o nome do kernel, então ele tem o mesmo nome do kernel padrão
Click to expand...
Click to collapse
Change it if you could.
Manteiga25 said:
rainbow kernel v-2.0 not tested
based on a125f
-more CPU regulators
-kernel optimized with -O3 -Fast (superior performance)
- a memory transparency is activated in fast mode (higher performance)
- optimizations for cortex a53 (higher performance)
- now polly generates an OpenMP code
-floating point optimization
-It is no longer necessary to use the AOSP clang
-branch optimization
-kernel compiled with clang-13 proton + polly + llvm + thinLTO + O3 Ofast + cortex a53 optimizations
Click to expand...
Click to collapse
new rainbow kernel v2.0 update
this update has not yet been tested send me a message if the new version bootloops
- optimizations for cortex a53 (higher performance)
- now polly generates an OpenMP code
-floating point optimization
-It is no longer necessary to use the AOSP clang
-branch optimization
-kernel compiled with clang-13 proton + polly + llvm + thinLTO + O3 Ofast + cortex a53 optimizations
LAST_krypton said:
Just flashed the kernel, it seems to work. But cpu z reports it like as if i flashed the stock kernel
Click to expand...
Click to collapse
He just forgot to change it in defconfig
Manteiga25 said:
new rainbow kernel v2.0 update
this update has not yet been tested send me a message if the new version bootloops
- optimizations for cortex a53 (higher performance)
- now polly generates an OpenMP code
-floating point optimization
-It is no longer necessary to use the AOSP clang
-branch optimization
-kernel compiled with clang-13 proton + polly + llvm + thinLTO + O3 Ofast + cortex a53 optimizations
Click to expand...
Click to collapse
Nice
rainbow kernel v3.0
Changlog:
-added XOR codec of the NEON arm can have a performance increase of up to 20%.
- Added boeffla_wl_blocker driver.
- vector optimizations, arrays, loops, parallelism, GPGPU codegen.
-Added OPENMP code
-More aggressive link optimizations.
-VDSO32 enhanced for higher performance in 32bit applications.
-samsung security disabled.
-other optimizations
-kernel compiled with clang-13 proton + LLVM + polly + thinLTO + OPENMP + -O3 -Ofast
Related
workes on AOSP based ROMZ
just like:
-CM11 -TeamEOS AOSP -pacman nightly -beanstalk -carbonrom -liquismooth
and more...
AGK-Kernel Features:
- CPU UC/OC 81 mhz - 1836 mhz
- CPU Volt Controll
- GPU UC/OC 128 mhz - 487 mhz (only in special Version) PM
CPU Governor:
-smartmax -interactive -conservative -ondemand -userspace -powersave -Lionheart -performance -badass -intellidemand
-intelliactive -smartassV2 -lagfree -nightmare -wrexy
Scheduler:
-noop -deadline -row -cfg -fiops -sio
Wake:
-sweep2wake -flick2wake -flick2sleep -doubletap2wake -home2wake -pick2wake -pocket detection -logo2menu
-Zimage is XZ compressed
-Add some Bluetooth driver
-Add Generic Dynamic Voltage and Frequency Scaling (DVFS) support
-Add HTC GPIO headset detection driver
-Add Line6 USB support
-Add intelli Plug new
-Add alucard hotplug new
-Add MSM Hotplug new
-Add CPR (core power reduction) new
Hotplug:
its always mpdecision and intelliplug.
if somebody like others like MSM or Alu, i can Build it!
I have switched to new fresh Kernel Source. The old builds are working with the most AOSP Romz. If you cant switch on wifi, try the new AGK Kernel. Download and source code will be here in thread! I let the old build online, so you can choose the best Kernel for you! Every Custom Rom is special, so just try!
Download new Kernel:
AGK-CM-BASED-v1.4.zip - 4.08 MB
AGK-CM-BASED v1.3-Aroma.zip - 8.53 MB
AGK-CM-BASED-v1.3.zip - 4.08 MB
AGK-CM-BASED-v1.3 - OC-VERSION.zip - 4.08 MB ATTENTION USE IT AT YOUR OWN RISK CPU up to 2.1GHz GPU up to 487MHz
AGK-CM-BASED v1.2-Aroma.zip - 8.52 MB
AGK-CM-BASED-v1.2.zip - 4.07 MB
AGK-CM-BASED-v1.1.zip - 4.08 MB
AGK-CM-BASED-v1.0.zip - 4.07 MB
Link to source: https://github.com/antaril/AGK-CM-BASED
History:
AGK CM Based Kernel v1.4
-add simple GPU Governor
-add intellim Governor
-add AGK-Lollipop features (GPU UC/OC CPU OC/UC options)
AGK CM Based Kernel v1.3
-add more scheduler
-fix pocket detection,pick2wake and flick2wake for all AOSP Roms
-merge new CM comits
AGK CM Based Kernel v1.2
-add a lot of fixes and stuff
-fix wake gestures
-add sound control
AGK CM Based Kernel v1.1
-Set VM_MAX_READAHEAD to 2048
-update intelliplug code
-overclock slimbus for best audio quality!!
-add more cpu stepps... OC and UC
-give more vcore room. For OC and UC
-Adding h2w/l2w/s2w/logo2menu/long tap sleep
AGK CM Based Kernel v1.0
-add sound control
-add intelli plug
-add governors
-add sheduler
-add volt controll
-add tweaks
-add CPU UC and little OC
-add bln
-add hotplugs
more coming soon...
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------
OLD KERNEL (stopping dev)
Link to source: https://github.com/antaril/AGK
Click to expand...
Click to collapse
History:
AGK Kernel v1.19
-refresh WIFI code
-refresh bluetooth code
AGK Kernel v1.18
-Set VM_MAX_READAHEAD to 2048
-change vref_core if oc is enable
-add ultra low cpu clock (81mhz)
-set lower .vreg[VREG_CORE] if OC is disabled
AGK Kernel v1.17
-add custom boot animation
-try to fix installation bug by 0% please report
-try to fix some wifi problems please report!!
AGK Kernel v1.16
-add "blinkin button mod" change it in AROMA
-fixing pocket detection when suspended
AGK Kernel v1.15
-fix intelli plug
-add msm hotplug (not active)
AGK Kernel v1.14
-add intelli plug
-add alucard hotplug (not active)
-add CPR (core power reduction)
-add wrexy governor
-add nightmare governor
-add Modules support
AGK Kernel v1.12
-Add Generic Dynamic Voltage and Frequency Scaling (DVFS) support
-Add HTC GPIO headset detection driver
-Add Line6 USB support
AGK Kernel v1.11
- compiled with XZ compression
AGK Kernel v1.1
-standard Governor smartmax
-standard Scheduler fiops
-Linaro 4.7 compiled
-Bluetooth fix
new Governors
-intellidemand
-intelliactive
-smartassV2
-badass
-lagfree
new Schedulers
-fiops
-sio
Click to expand...
Click to collapse
DOWNLOAD:
AGK Kernel v1.19
Aroma Link:AGK_Kernel - v1.19-Aroma.zip - 8.51 MB
AGK Kernel v1.18
Aroma Link: AGK_Kernel - v1.18-Aroma.zip - 8.52 MB
Non Aroma Link: AGK_Kernel - v1.18-nonAroma.zip - 4.07 MB
-Set VM_MAX_READAHEAD to 2048
-change vref_core if oc is enable
-add ultra low cpu clock (81mhz)
-set lower .vreg[VREG_CORE] if OC is disabled
Special Versions:
AGK_Kernel - v1.24-DU.zip - 4.03 MB Based on MSM9860 Kernel Source! Once createt especially for Dirty Unicorns Rom, now it works with a lot AOSP based ROMZ.
AGK_Kernel - v1.15-Aroma.zip - 8.52 MB OC-VERSION only for people who know what they do!!
AGK_Kernel - v1.15-MSM-Aroma.zip - 8.52 MB MSM Hotplug
AGK_Kernel - v1.15-alu-Aroma.zip - 8.52 MB alucard hotplug
AGK_Kernel - v1.15-nohot-Aroma.zip - 8.52 MB no alternative hotplugs!!
AGK_Kernel - v1.15.zip - 3.79 MB classic recovery
thx to: faux123, team7, neobuddy89, myfluxi, Se Hun Kim, and especially AuxXxilium for his help!!!
Desperately wating for AOSP KERNEL. thanks man:::
does it has AROMA INSTALLER.....?
hiimimtayaz said:
Desperately wating for AOSP KERNEL. thanks man:::
does it has AROMA INSTALLER.....?
Click to expand...
Click to collapse
no classic recovery
Antaril said:
Here is my own Kernel! Try and give responce please!
Click to expand...
Click to collapse
Can we get a link to your kernel source please.
Thanks.
Andy said:
Can we get a link to your kernel source please.
Thanks.
Click to expand...
Click to collapse
sorry iam from germany, so my english is not very good.
the source is on my computer.
i download the ground source from github and add OC/UC governors,scheduler and some patches.
iam not a coder, i think iam a modder! sorry i hope this is ok
i can upload my source to github if this is possible
Antaril said:
i can upload my source to github if this is possible
Click to expand...
Click to collapse
Yes please. In order to be GPL compliant, the source required to build the exact same kernel needs to be available.
Thanks.
Andy said:
Yes please. In order to be GPL compliant, the source required to build the exact same kernel needs to be available.
Thanks.
Click to expand...
Click to collapse
In first post, you can see the link to source code!
Antaril said:
In first post, you can see the link to source code!
Click to expand...
Click to collapse
Thank you very much.
Andy said:
Thank you very much.
Click to expand...
Click to collapse
you are welcome
I wanted a AOSP kernel as well. we have over 20 kernels all are sense. finally. thanks,
Will try, finally a kernel with s2w and dt2w, thanks!
Sent from my HTC One using XDA Premium 4 mobile app
first hardcore AOSP kernel and the guy only has a few likes? c'mon people, I don't even use AOSP, but that $h17 deserves some thanks!
Needs a better download host or a mirror ..site won't load on my cell and I won't install a third party app to download it
Sent from my One using XDA Free mobile app
Yeah...we need a download source that doesn't require an app. Then I'll give it a go.
Sent from my One using XDA Premium 4 mobile app
chillybean said:
Needs a better download host or a mirror ..site won't load on my cell and I won't install a third party app to download it
Click to expand...
Click to collapse
badams1 said:
Yeah...we need a download source that doesn't require an app. Then I'll give it a go.
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Please find here a Mirror. If the author of the kernel has anything against the mirror, please let me know otherwise he may do with it whatever he wants
Mirror at zippyshare
Here's another mirror:
https://www.dropbox.com/s/sap95hm0j7fsvkz/AGK_Kernel - v1.11.zip
Sent from the Thing that should not be.
Finaly. Anyone tested on liquidsmooth
Sent from my One using Tapatalk
thx "No_Fear"
add link to first thread
Thanks for supporting aosp
Inviato dal mio HTC One utilizzando Tapatalk
Downloading now. Always appreciative for additional options.
Sent from my One
Here i bring you the first custom kernel for lollipop with all AGK typical features!!!!
AGK-Kernel Features:
- CPU UC/OC 81 mhz - 1836 mhz
- CPU Volt Controll
- GPU UC/OC 64 MHz - 487 MHz NEW
CPU Governor:
-smartmax -interactive -conservative -ondemand -userspace -powersave -Lionheart -performance -badass -intellidemand
-intelliactive -smartassV2 -lagfree -nightmare -wrexy
Scheduler:
-noop -deadline -row -cfg -fiops -sio -fifo -zen
Kexec Hardboot for Multirom!! NEW
Wake:
-sweep2wake -flick2wake -flick2sleep -doubletap2wake -home2wake -pick2wake -pocket detection -logo2menu
XZ compressed
Intelli Plug includet
Hotplug:
its always mpdecision and intelliplug.
if somebody like others like MSM or Alu, i can Build it!
Click to expand...
Click to collapse
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
DOWNLOAD:
GPE / Sense/U]
AGK-LOLLIPOP-GPE-V1.21.zip - 4.48 MB Test it
AGK-LOLLIPOP-GPE-V1.0.zip - 4.44 MB
AGK-LOLLIPOP-GPE-V1.1.zip - 4.44 MB
AOSP Edition
AGK-LOLLIPOP-V1.71. zip
AGK-LOLLIPOP-V1.7 zip
AGK-LOLLIPOP-V1.62zip - 4.08 MB Same as 1.61 but compiled with Linaro 4.7
AGK-LOLLIPOP-V1.61.zip - 4.08 MB
AGK-LOLLIPOP v1.61-Aroma.zip - 8.53 MB
AGK-LOLLIPOP v1.6-Aroma.zip - 8.53 MB
AGK-LOLLIPOP-V1.6.zip - 4.08 MB
AGK-LOLLIPOP v1.5-Aroma.zip - 8.55 MB
AGK-LOLLIPOP-V1.5.zip - 4.10 MB
AGK-LOLLIPOP v1.4-Aroma.zip - 8.54 MB
AGK-LOLLIPOP-V1.4.zip - 4.09 MB
AGK-LOLLIPOP v1.3-Aroma.zip - 8.54 MB
AGK-LOLLIPOP-V1.3.zip - 4.09 MB
AGK-LOLLIPOP v1.2-Aroma.zip - 8.53 MB
AGK-LOLLIPOP v1.2-Aroma.zip - 8.53 MB : MIRROR
AGK-LOLLIPOP-V1.1.zip - 4.08 MB
AGK-LOLLIPOP-V1.1 - oc.zip - 4.09 MB Be carefull !!!
MIRROR: http://www.xup.to/dl,37250953/AGK-LOLLIPOP-V1.1.zip/
AGK-LOLLIPOP-V1.0.zip - 5.76 MB
Back to stock
If you want back to stock cm12 kernel without AGK features, just flash this!
You will flash the original cm12 kernel!!
back-to-stock.zip - 5.71 MB
Click to expand...
Click to collapse
Kernel Source:
https://github.com/antaril/AGK-LOLLIPOP
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Changelog:
AGK-LOLLIPOP V1.61 (AOSP)
-add msm sleeper
AGK-LOLLIPOP V1.21 (GPE)
-add smartmax
-add more scheduler
-add Thermal controle
-fix for intelli_plug
-add LCD colour adjust
AGK-LOLLIPOP V1.6 (AOSP)
-add simple GPU GOVERNOR
-compiled with Linaro 4.8
AGK-LOLLIPOP V1.5 (AOSP)
-add brand new iltellim governor (thx to faux123 for development)
-add preservative governer
-add OTG support
AGK-LOLLIPOP V1.4 (AOSP)
-complete adding kedex hardboot
AGK-LOLLIPOP V1.3 (AOSP)
- complete recoding features
-add underclocking Option in kernel settings
-if GPU OC and UC is enabled, GPU goes Form 64MHz-450MHz.
-if only OC is enabled GPU goes Form 128MHz- 487MHz
-if disabled GPU OC and UC it goes from 128MHz-400MHz (stock)
-should have better smoothness, please report!
AGK-LOLLIPOP V1.2 (AOSP)
-synched with newest CM source
-add ultra low GPU freq (experimental)
-add CPU/GPU OC/UC option in source (not activate in normal build)
-some changes in touch stuff
-now with AROMA installer
AGK-LOLLIPOP V1.1 (AOSP)
-add volt controll
-add governors
-deactivate all other hotplugs
-xz compressed
-and more...
AGK-LOLLIPOP V1.0 (AOSP)
-add touch stuff
-add BLN
-add Intelli-Plug
-add Sound controll
-add OC and UC
more coming soon ...
Click to expand...
Click to collapse
if you like my work... buy me a beer
Thank you. Testing [emoji106]
One cihazımdan Tapatalk kullanılarak gönderildi
I'll test it. I hope this kernel doesn't have SODs
I've been running it for maybe five minutes and it's smooth. I'll test it further.
How to use this features? I dont see any app to control kernel.
marcinowozniako said:
How to use this features? I dont see any app to control kernel.
Click to expand...
Click to collapse
trickster mod for example
Antaril said:
Here i bring you the first custom kernel for lollipop with all AGK typical features!!!!
AGK-Kernel Features:
- CPU UC/OC 81 mhz - 1836 mhz
- CPU Volt Controll
- GPU UC/OC 128 mhz - 487 mhz (only in special Version) PM
CPU Governor:
-smartmax -interactive -conservative -ondemand -userspace -powersave -Lionheart -performance -badass -intellidemand
-intelliactive -smartassV2 -lagfree -nightmare -wrexy
Scheduler:
-noop -deadline -row -cfg -fiops -sio
Wake:
-sweep2wake -flick2wake -flick2sleep -doubletap2wake -home2wake -pick2wake -pocket detection -logo2menu
-Zimage is XZ compressed
-Add some Bluetooth driver
-Add Generic Dynamic Voltage and Frequency Scaling (DVFS) support
-Add HTC GPIO headset detection driver
-Add Line6 USB support
-Add intelli Plug new
-Add alucard hotplug new
-Add MSM Hotplug new
-Add CPR (core power reduction) new
Hotplug:
its always mpdecision and intelliplug.
if somebody like others like MSM or Alu, i can Build it!
DOWNLOAD:
AGK-LOLLIPOP-V1.0.zip - 5.76 MB
Kernel Source:
just uploading...
Click to expand...
Click to collapse
Damn son u fast!!
Ha!!! Here we go!!!
Everything works. [emoji16]
And long press logo is sleep.
Is this kernel better in terms of battery life than the stock kernel?
Also why does the screen turn back on sometimes or off when I pick it up? Lol
could it add kexect-hardboot?
LoneFlac said:
Is this kernel better in terms of battery life than the stock kernel?
Also why does the screen turn back on sometimes or off when I pick it up? Lol
Click to expand...
Click to collapse
you have to use trickster mod and go to the wake options... there you can see pick2wake! deactivate it, if you like!
I have the feeling that the kernel makes CM a bit more laggy instead of smooth...
Scrolling feels laggy but other then that everything is fantastic
Running great on M7VZW, thanks brohan!
great job. will try and feed back
alistondsouza said:
@Antaril...
https://plus.google.com/104557258779291557233/posts/HoaxL6GHdse
Click to expand...
Click to collapse
thx man
new version out there
your not the first my kernel has been L ready for about 3 weeks but theres been no reason to release an L kernel because before now there has been no roms
cannondaleV2000 said:
your not the first my kernel has been L ready for about 3 weeks but theres been no reason to release an L kernel because before now there has been no roms
Click to expand...
Click to collapse
but now there are
i have try your kernel... good work!! But not with Lollipop, just KitKat
Aur-kernel for xz5x
- Features
Compiled with gcc 4.9.4 (UBERTC)
Powersuspend
Thunderplug
Frandom
Vnswap
Dynamic sync
Fast charge
Underclocking.
Sio and fiops i/o shedulers
Faux sound control
NVIDIA power efficiency patches
Enabled power_efficient workqueues
Optimized memset - memcpy
Usb fastcharge
Drive droid support - mount cdrom
Kcal color control (thanks to @savoca)
Module param to change the thermal throttle temperature
Various performance/stability optimizations
- Changelog-Marshmallow
Aur-Kernel_Xz5x _E6xxx _v3.0
-Based on sony kernel source fw 32.1.A.1.185 marshmallow
-ARM64 CRC32 hw accelerated module
-Interactive governor optimizations
-Ipv4 window size to 64K (speed improvement)
-Add a module param to change the thermal throttle temperature
-Implemented task's adj rbtree
-Increased the buffer-head per-CPU LRU size
-Adreno idler for devfreq
-Added sysinterface for GENTLE_FAIR_SLEEPERS
Aur-Kernel_Xz5x _E6xxx _v2.0
-Based on sony kernel source fw 32.1.A.1.163 marshmallow
-First release for mm
-All features and patches from aur-kernel LL
FOR MORE CHECK GITHUB AUR KERNEL
- Changelog-Lollipop
Aur-Kernel_Xz5x _E6xxx _v1.2.5
-BFQ and ZEN i/o schedulers
-Enabled power_efficient workqueues
-Drive droid support - mount cdrom
-UPDATE :NVIDIA power efficiency patches
-Allow 320K AAC encoding
-Added new driver for on/off operations
-Enable L1/L2 clock gating WA
Aur-Kernel_Xz5x _E6xxx _v1.2.4
NVIDIA power efficiency patches
-Usb fastcharge
-Add audit support
-Memory utilities optimization
-Activate additional 27 MHz gpu frequency step
-Tweaks to reduce lags improve battery life
Aur-Kernel_Xz5x _E6xxx _v1.2.3
-Removed msm hotplug
-Cleaned some patches
-Add underclocking....
Powersuspend
Thunderplug
Frandom
Vnswap
Dynamic sync
-More kernel optimizations
Aur-Kernel_Xz5x _E6xxx _v1.2.2
-Introduce new relation for freq selection
-Optimizations on cpu-boost <integrated with hotplug driver and cpufreq governor>
-Added Impulse governor
-Prevent the driver from handling userspace on msm performance
-Added a simple api to query the display state (on/off)
-Enabled arch power
-Optimized make file for cortex-a57
-Added power quickwakeup
-Optimize ksm
-Added msm hotplug driver
-Added hotplug enable toggle
-Added a module param to change the thermal throttle temperature
Aur-Kernel_Xz5p _E68xx _v1.2
- Enabled x-reality,etc.. -Thanks to tobias.wadvogel
- Add sio and fiops i/o shedulers
- Make input boosting optional
- Implement task's adj rbtree
- Skip dying or exiting task
- Maintain LMK rbtree with signal->adj_node
- Reduce the rate of needless idle load balancing
- Stop searching for tasks in newidle balance
- Enable UFS ICE
Aur-Kernel_Xz5p _E68xx _v1.1
- Removed tomtomsound control
- Added faux sound control
- Kcal color control (thanks to @savoca)
- Various performance/stability optimizations
SEE MORE ON GITHUB
Aur-Kernel_Xz5p _E68xx _v1
- Based on fw 32.0.A.6.200
- Compiled with gcc 4.9.3 (UBERTC)
- Disabled dm_verity
- Selinux enforcing
- Tomtom sound control by Tom G.
- Kernel Marshmallow :
Aur-Kernel_Xz5p _E6853 _v4.0
Aur-Kernel_Xz5p _dsds _v4.0
Aur-Kernel_Xz5 _E6653 _v4.0
Aur-Kernel_Xz5 _dsds _v4.0
Kernel_Xz5p _E6853_fw224-STOCK
Kernel_Xz5p _DUAL_fw224-STOCK
Kernel_Xz5 _E6653_fw224-STOCK
Kernel_Xz5 _DUAL_fw224-STOCK
- Kernel Lollipop :
Kernel_Xz5 _E6653 _v1.2.5
Kernel_Xz5p _E6853 _v1.2.5
Kernel_Xz5p _E6853 _v1.2.1 overclock-drm fix
Kernel_Xz5p _E6883 _v1.2.5
Kernel_Xz5p _E6883 _v1.2.1 overclock-drm fix
INSTALL KERNEL ADIUTOR FROM PLAY STORE TO MAKE CHANGES AND ThunderZap Control FOR Thunderplug
SEE MORE ON GITHUB
Kernel Source :
Aur kernel
Thanks Too :
tobias.waldvogel for drm fix
flar2
franciscofranco
AndroPlus
Tommy-Geenexus
- I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY CAUSE YOUR DEVICE
- If you appreciate my work qualifies with 5 stars
- If you appreciate my work and dedication
Feel free to donate
RESERVED
Thank bro
Hy
Is this for Customized Locked BL Kernel?
Gesendet von Rotwild G1 Gravity
get2easy said:
Hy
Is this for Customized Locked BL Kernel?
Gesendet von Rotwild G1 Gravity
Click to expand...
Click to collapse
Custom kernels will never work with locked BL
Sent from my Z5 Premium using XDA Labs
Thx for the Information
Gesendet von Rotwild G1 Gravity
auras76 said:
- Features
Compiled with gcc 4.9.4 (UBERTC)
Powersuspend
Thunderplug
Frandom
Vnswap
Dynamic sync
Underclocking.
Sio and fiops i/o shedulers
Faux sound control
NVIDIA power efficiency patches
Enabled power_efficient workqueues
Optimized memset - memcpy
Usb fastcharge
Drive droid support - mount cdrom
Kcal color control (thanks to @savoca)
Module param to change the thermal throttle temperature
Various performance/stability optimizations
- Changelog-Marshmallow
- Changelog-Lollipop
Aur-Kernel_Xz5x _E6xxx _v1.2.5
-BFQ and ZEN i/o schedulers
-Enabled power_efficient workqueues
-Drive droid support - mount cdrom
-UPDATE :NVIDIA power efficiency patches
-Allow 320K AAC encoding
-Added new driver for on/off operations
-Enable L1/L2 clock gating WA
Aur-Kernel_Xz5x _E6xxx _v1.2.4
NVIDIA power efficiency patches
-Usb fastcharge
-Add audit support
-Memory utilities optimization
-Activate additional 27 MHz gpu frequency step
-Tweaks to reduce lags improve battery life
Aur-Kernel_Xz5x _E6xxx _v1.2.3
-Removed msm hotplug
-Cleaned some patches
-Add underclocking....
Powersuspend
Thunderplug
Frandom
Vnswap
Dynamic sync
-More kernel optimizations
Aur-Kernel_Xz5x _E6xxx _v1.2.2
-Introduce new relation for freq selection
-Optimizations on cpu-boost <integrated with hotplug driver and cpufreq governor>
-Added Impulse governor
-Prevent the driver from handling userspace on msm performance
-Added a simple api to query the display state (on/off)
-Enabled arch power
-Optimized make file for cortex-a57
-Added power quickwakeup
-Optimize ksm
-Added msm hotplug driver
-Added hotplug enable toggle
-Added a module param to change the thermal throttle temperature
Aur-Kernel_Xz5p _E68xx _v1.2
- Enabled x-reality,etc.. -Thanks to tobias.wadvogel
- Add sio and fiops i/o shedulers
- Make input boosting optional
- Implement task's adj rbtree
- Skip dying or exiting task
- Maintain LMK rbtree with signal->adj_node
- Reduce the rate of needless idle load balancing
- Stop searching for tasks in newidle balance
- Enable UFS ICE
Aur-Kernel_Xz5p _E68xx _v1.1
- Removed tomtomsound control
- Added faux sound control
- Kcal color control (thanks to @savoca)
- Various performance/stability optimizations
SEE MORE ON GITHUB
Aur-Kernel_Xz5p _E68xx _v1
- Based on fw 32.0.A.6.200
- Compiled with gcc 4.9.3 (UBERTC)
- Disabled dm_verity
- Selinux enforcing
- Tomtom sound control by Tom G.
- Kernel Marshmallow :
Kernel_Xz5p _E6853_fw163-STOCK
Kernel_Xz5p _E6883_fw163-STOCK
Kernel_Xz5 _E6653_fw163-STOCK
Kernel_Xz5 _E6683_fw163-STOCK
- Kernel Lollipop :
Kernel_Xz5 _E6653 _v1.2.5
Kernel_Xz5p _E6853 _v1.2.5
Kernel_Xz5p _E6853 _v1.2.1 overclock-drm fix
Kernel_Xz5p _E6883 _v1.2.5
Kernel_Xz5p _E6883 _v1.2.1 overclock-drm fix
INSTALL KERNEL ADIUTOR FROM PLAY STORE TO MAKE CHANGES
SEE MORE ON GITHUB
Kernel Source :
Aur kernel
Thanks Too :
tobias.waldvogel for drm fix
flar2
franciscofranco
AndroPlus
Tommy-Geenexus
Click to expand...
Click to collapse
FYI for other early adopters: None of the features implemented in e6653 mm kernel
goRt said:
FYI for other early adopters: None of the features implemented in e6653 mm kernel
Click to expand...
Click to collapse
Working on it.
With new aur custom kernel for 6853 for MM faux sound doesn't work.seems that feature are not implemented
leobiagi said:
With new aur custom kernel for 6853 for MM faux sound doesn't work.seems that feature are not implemented
Click to expand...
Click to collapse
Mm kernel is near stock as of now I assume. Drm fix and selinux enforcement has been done. This allows the basic rooting of the phone .
I think he is working on a custom kernel based on MM for the device , so wait for a while maybe
hi, the new kernel (Aur-Kernel_Xz5p _E6853 _v2.0) for your MM rom i install simply by flash from recovery? Or adb method?Thank you, auras!!!!
Eddiejam72 said:
hi, the new kernel (Aur-Kernel_Xz5p _E6853 _v2.0) for your MM rom i install simply by flash from recovery? Or adb method?Thank you, auras!!!!
Click to expand...
Click to collapse
On recovery.
The kernel is running smooth as of now thanks @auras76
Sent from my Sony E6883 using XDA Labs
What about e6833
How to enable hotplug?
Use Kernel adiutor from playstore
---------- Post added at 16:25 ---------- Previous post was at 15:25 ----------
Is it possible to make a permissive version of this kernel?
Black_Focus_X said:
Use Kernel adiutor from playstore
---------- Post added at 16:25 ---------- Previous post was at 15:25 ----------
Is it possible to make a permissive version of this kernel?
Click to expand...
Click to collapse
It is.
auras76 said:
It is.
Click to expand...
Click to collapse
Ok cool thanks
@auras, is it possible to restore fm radio without headset feature?
Thanks
hey the kernel for the Xz5 and the Xz5p on FW.163 is the same file, they are both for the Xz5p
Is this right? I am flashing the Xz5p one onto my E6653 and it doesn't work...
RKernel
Code:
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Custom kernel with some ThunderZap and other future
-Based on latest sources
- Compiled with GCC 4.8
-Aroma Installer (thank varun.chitre15)
-Switched to AnyKernel
-Compilled with gpu and neon optimized flags
-CPU Overclockable upto 1.5Ghz
-GPU Overclockable to 500Mhz
-New hotplug(Alucard | Itelli | msm)
-New governor
-New I/O Schedulers
-Add new TCP/IP
-Slightly speed up EXT4
-Switch to LZ4 kernel compression for faster boot
(better than XZ)
-Fast charge by @faux123
-Added zSwap from Linux 3.11
-Added frontswap
-Added vnswap
-Dynamic Fsync 2.0
-Intelli-thermal by @varun.chitre15
-CPU Voltage Control
-GPU Voltage Control [930 | 1000 | 1100]
-Smooth Scrolling Tweak
- Linux MM Readahead set to 512k
-Enable Aggressive Multi-Core Power Savings
-Disabled CRC check
-Disabled GENTLE_FAIR_SLEEPERS
-Enabled ARCH_POWER
-Optimizations to default SLUB allocator
-Patch for depleting entropy requiring no need of frandom or any rngd tweaks
-Asynchronous I/O latency to a solid-state disk greatly increased
-Faster NOATIME and NODIRATIME fs mounting flags
-Optimized apply_slack() method for size and speed
-Lock initial TCP window size to 64k (Improves network ping and output)
-Dynamic management of dirty page writebacks
- Improved IO throughput
- Merged some writeback patches to improve vmscan module
DOWNLOAD:
V4.0
Credits:
@varun.chitre15
@faux123
@Tomoms
XDA:DevDB Information
RKernel, Kernel for the Sony Xperia L
Contributors
rostifaner, cucumber09
Source Code: https://github.com/rostifaner/android_kernel_sony_msm8930
Kernel Special Features: Best feature nowadays
Version Information
Status: Stable
Created 2016-03-27
Last Updated 2016-10-21
Changelogs
V4.0
Fixed WI-FI
Based on latest sources
Fixed second core over-riding issue if using stock mpdecision
Deleted all hotplug(not needed now)
Update to latest f2fs
Fix some memory leaks
Deleted zSwap
Added zRam from latest source
Optimised memory routine
Added ThunderSonic Engine(tnank varun.chitre15)
Deleted current fast charge
Added Charger control(tnank varun.chitre15)
Enable optimized SHA-256/224
Added frandom support
Improves network speed
Optimization for the memcpy, memmove, copy_page
Cleaned kernel from unused stuff
Other small fixes and improves
V3.0
Aroma Installer (thank varun.chitre15)
Switched to AnyKernel
Compability with - CM12.x CM11(need test) - AOSP,CM based ROM's
Compilled with gpu and neon optimized flags
Added zSwap from Linux 3.11
Added frontswap
Added vnswap
Update to latest f2fs
Added LZ4 decompressor module
Set CONFIG_HZ to 300(improve UI responsiveness, especially
when there is significant background CPU work)
Slightly speed up EXT4
Switch to LZ4 kernel compression for faster boot
(better than XZ)
Added Alucard hotplug
Added msm_hotplug
Dynamic Fsync 2.0
Set readahead to 512
Fix a possible memory leak
Other small fixes and improves
V2
OC to 1.5GHz
UC to 286MHz
Fixed second core over-riding issue with OC thank @faux123
Decreased voltage for all frequency by @varun.chitre15
Based on latest sources
New hotplug(Bricked and Intelli)
New governor (intellidemand2 | intelliactive | smartmax | wheatley | bioshock | lionheart)
New I/O Schedulers (fifo | vr | zen | sioplus)
Add new TCP/IP
Fast charge by @faux123
Intelli-thermal by @varun.chitre15
Add .zip installation
and other small fixes
About second core, stock mpdecision causes this bug.You need to disable his and using other hotplug(bricked or intelli)
V1
Initial Release. More features to come soon
Old version
DOWNLOAD:
V3
V2
V1
Good work :good:
rostifaner said:
RKernel
Code:
[/QUOTE]
Awesome work bro,co thank ;):o
Click to expand...
Click to collapse
We need zram because of just 1Gb available on this phone. Thanks
cojocar.andrei said:
We need zram because of just 1Gb available on this phone. Thanks
Click to expand...
Click to collapse
I'm testing Zram, this slows down our memory
Cm12.1 support ?
OmenHTX said:
Cm12.1 support ?
Click to expand...
Click to collapse
No,only for the cm13.0
rostifaner said:
I'm testing Zram, this slows down our memory
Click to expand...
Click to collapse
I was afraid of this. 1Gb is really not enough anymore...
Does this work on custom roms based on cm13?
cojocar.andrei said:
I was afraid of this. 1Gb is really not enough anymore...
Click to expand...
Click to collapse
1gb ram is not enough. I cant use chrome, set live wallpaper and chat messenger at the same time. It is so laggy
newguyknowsnothing said:
1gb ram is not enough. I cant use chrome, set live wallpaper and chat messenger at the same time. It is so laggy
Click to expand...
Click to collapse
You don't have to use live wallpaper?
1GB is really not enough nowadays but then u don't have to use some extra stuff like live wallpaper.
any reason for not having 1.5ghz (preferred, not much gain if 1.7ghz on geekbench3) or 1.7ghz (well, the more the merrier ) ?
shouldn't bring much heat unless you use both cores at such OC speed.
I need it for PPSSPP and Drastic which only uses 1 core.
EDIT : nevermind, just noticed you added 1.5ghz on your github.
Xperia_L said:
You don't have to use live wallpaper?
1GB is really not enough nowadays but then u don't have to use some extra stuff like live wallpaper.
Click to expand...
Click to collapse
Yeah I know ... Just saying. i haven't used live wallpaper for such a long time. 1 gb is not enough for apps these days.
lybxlpsv said:
EDIT : nevermind, just noticed you added 1.5ghz on your github.
Click to expand...
Click to collapse
yaa,release rollout soon
Great Job! :good:
Waiting AOSP MM support
★Deathstroke★ said:
Great Job! :good:
Waiting AOSP MM support
Click to expand...
Click to collapse
Welcome my friend!
Do i need to flash this even if the rom rr-6.0.1 has its built-in kernel,/audiutor? Whats the difference of this kernel to stock kernel of RR.
Thanks in advance.
Update
RKernel-2.0+
Time for the new future
OC to 1.5GHz
UC to 286MHz
Fixed second core over-riding issue with OC thank @faux123
Decreased voltage for all frequency by @varun.chitre15
Based on latest sources
New hotplug(Bricked and Intelli)
New governor (intellidemand2 | intelliactive | smartmax | wheatley | bioshock | lionheart)
New I/O Schedulers (fifo | vr | zen | sioplus)
Add new TCP/IP
Fast charge by @faux123
Intelli-thermal by @varun.chitre15
Add .zip installation
and other small fixes
About second core, stock mpdecision causes this bug.You need to disable his and using other hotplug(bricked or intelli)
Download
Disclaimer
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but i'm very interest in thermonuclear war, so if you point the finger
* at me for messing up your device just because this kernel, I will
* send you to the mars with Nuclear Rocket. Act accordingly.
* I know this paragraph is conspiracy-included, so
* dont ask about it. Welcome.
*/
REVOLT KERNELFORRED MI NOTE 4 SD
HMP VERSION
Features:
Upstream to 3.18.110 & based on LA.UM.6.6.r1-08500-89xx.0 caf tag
OC CPU to 2.2 Ghz & GPU to 700 Mhz
Compiled with dragontc 7.x
Optimized for msm8953 chip
KCAL color control
Sound control
Virtual memory : KSM,ZRAM, ZCACHE & FONT SWAP
Misc : Disbaled Fsync, Arch Power,CRC & Gentle fair sleepers toogle
I/O SCHEDULERS :FIOPS,MAPLE,SIO,BFG,CFQ,deadline,noop
Governor :Blue_active,conservative, ondemand, userspace, powerspace, interactive, performance.
Tweaked interactive governor
Disable lot of debugging to improve performance
Early suspend driver
Vibration intensity control
F2FS Support
exFAT Support
NTFS Support
Disabled CRC check (up to 30% faster I/O)
Blocked many wakelocks
Boeffla wakelocker
KSM optimization
Zram optimization
random updated to 4.2
Frandom number generator
HZ 1000 for best performance
HW 32,chacha20poly1305,poly1305 & SHA256 cypto Support
Load average fix
Optimized SHA256 cypto Support
Nvidia power saving tunnigs
Ardeno idler
Quick wakeup
USB fast charge 2.0
Wireguard Support
Gestures :
*Swipe to wake
*Swipe to sleep
*Double tap to wake
TCP congestion algorithm : bic,cubic,CDG, htcp, highspeed, vegas, reno, scalable, lp, , illinois, Westwood,hybla,veno,yeah
spectrum Support
Works in both AOSP/LineageOS based ROMs
General Performance & Battery life optimizations
And more you can find on my GitHub in commits
HMP VERSION
Features:
Upstream to 3.18.110 & based on LA.UM.6.6.r1-08500-89xx.0 caf tag
Compiled with dragontc 7.x
Optimized for msm8953 chip
KCAL color control
Sound control
Virtual memory : KSM,ZRAM, ZCACHE & FONT SWAP
Misc : Disbaled Fsync, CRC & Gentle fair sleepers toogle
I/O SCHEDULERS :FIOPS,MAPLE,SIO,BFG,CFQ,deadline,noop,zen
Governor :Shedutil,PwrUtil.
Vibration intensity control
F2FS Support
Disabled CRC check (up to 30% faster I/O)
Blocked many wakelocks
Boeffla wakelocker
UKSM optimization
Zram optimization
random updated to 4.2
Frandom number generator
HZ 1000 for best performance
HW 32 & SHA256 cypto Support
Optimized SHA256 cypto Support
Nvidia power saving tunnigs
Ardeno idler
USB fast charge 2.0
Wireguard Support
Gestures :
*Swipe to wake
*Swipe to sleep
*Double tap to wake
TCP congestion algorithm : bic,cubic,CDG, htcp, highspeed, vegas, reno, scalable, lp, , illinois, Westwood,hybla,veno,yeah
spectrum Support
Works in both AOSP/LineageOS based ROMs
General Performance & Battery life optimizations
And more you can find on my GitHub in commits
Download:
Installation:
Download the zip file
Reboot to your recovery (I'm suggested yo to INSTALL TWRP 3.0.2)
BACKUP your BOOT partition (to make it safe so your can restore if found any critical problem)
Install the zip file
Reboot to system
[/COLOR]
Credits:
- LINUS for the sources
- @LordArcadius
- @DroidTug
[email protected]
- @franciscofranco
[email protected]
[email protected]
[email protected]
- @Arnav Gosain
[email protected] For his EAS port to oreo caf.(Huge tanks)
[email protected] for his help with EAS
For support join our telegram group
Telegram Group
Requirements
*Mido
*Working brain
*Basic understanding on how to read things
*Capability to use Google.com
*Not messing things up ,just to look cool
-all the other developers from i cherry-picked commits
-all the other testers
XDA:DevDB Information
REVOLT_REVOLUTION, ROM for the Xiaomi Redmi Note 4
Contributors
NATO66613, nato66613, hamil1150
Source Code: https://github.com/kondors1995/android_kernel_xiaomi_msm8953
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Created 2018-05-17
Last Updated 2018-05-27
Reserved
Downloads Mirrors:
Github: https://github.com/kondors1995/android_kernel_xiaomi_msm8953/releases
AFH: https://www.androidfilehost.com/?w=files&flid=261461
Reserved
Nice work dev.. will try soon asap
Edit:what is the difference between revolt and revolt revolution?
Dzu_nun said:
Nice work dev.. will try soon asap
Edit:what is the difference between revolt and revolt revolution?
Click to expand...
Click to collapse
REVOLUTION is RE-RELEASE of it since @Boomshiva left project tread was closed down. So i made new tread
Great kernel, tyvm! Currently on OC version, easy to tweak with spectrum, pretty balanced battery backup/ performance, no ui lags or issues with fc of YT
does this kernel has treble support?
HPS7041 said:
does this kernel has treble support?
Click to expand...
Click to collapse
Yup
NATO66613 said:
Downloads Mirrors:
Github: https://github.com/kondors1995/android_kernel_xiaomi_msm8953/releases
AFH: https://www.androidfilehost.com/?w=files&flid=261461
Click to expand...
Click to collapse
Kernel old.
NATO66613 said:
REVOLUTION is RE-RELEASE of it since @Boomshiva left project tread was closed down. So i made new tread
Click to expand...
Click to collapse
Be a bit soft with xda ??
It's okay to flash this for non treble rom? Specifically dotOS v2.1 rom?
does it support android 7.1 ?
Wishh09 said:
It's okay to flash this for non treble rom? Specifically dotOS v2.1 rom?
Click to expand...
Click to collapse
Just use 29.1 + version sice from 29.1 i added support for non treble rom.
Phamtung30h said:
Kernel old.
Click to expand...
Click to collapse
29.1 is stable 29.5 is beta
NATO66613 said:
Just use 29.1 + version sice from 29.1 i added support for non treble rom.
Click to expand...
Click to collapse
Okay thanks i would try this.?
Boomshiva said:
Be a bit soft with xda ??
Click to expand...
Click to collapse
Or it will end like last time
nice work
does it support 7.1 ?? why dont you rep me @NATO66613 ??
khangcobra said:
does it support 7.1 ?? why dont you rep me @NATO66613 ??
Click to expand...
Click to collapse
No its stated in op
Boomshiva said:
Be a bit soft with xda ??
Click to expand...
Click to collapse
Boomshiva has been deserter #Vaingloryteam
---------- Post added at 03:15 PM ---------- Previous post was at 03:10 PM ----------
Same as stock kernel? Is Cpu max cap set @1.6ghz?