Here i bring you the first custom kernel for lollipop with all AGK typical features!!!!
AGK-Kernel Features:
- CPU UC/OC 81 mhz - 1836 mhz
- CPU Volt Controll
- GPU UC/OC 64 MHz - 487 MHz NEW
CPU Governor:
-smartmax -interactive -conservative -ondemand -userspace -powersave -Lionheart -performance -badass -intellidemand
-intelliactive -smartassV2 -lagfree -nightmare -wrexy
Scheduler:
-noop -deadline -row -cfg -fiops -sio -fifo -zen
Kexec Hardboot for Multirom!! NEW
Wake:
-sweep2wake -flick2wake -flick2sleep -doubletap2wake -home2wake -pick2wake -pocket detection -logo2menu
XZ compressed
Intelli Plug includet
Hotplug:
its always mpdecision and intelliplug.
if somebody like others like MSM or Alu, i can Build it!
Click to expand...
Click to collapse
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
DOWNLOAD:
GPE / Sense/U]
AGK-LOLLIPOP-GPE-V1.21.zip - 4.48 MB Test it
AGK-LOLLIPOP-GPE-V1.0.zip - 4.44 MB
AGK-LOLLIPOP-GPE-V1.1.zip - 4.44 MB
AOSP Edition
AGK-LOLLIPOP-V1.71. zip
AGK-LOLLIPOP-V1.7 zip
AGK-LOLLIPOP-V1.62zip - 4.08 MB Same as 1.61 but compiled with Linaro 4.7
AGK-LOLLIPOP-V1.61.zip - 4.08 MB
AGK-LOLLIPOP v1.61-Aroma.zip - 8.53 MB
AGK-LOLLIPOP v1.6-Aroma.zip - 8.53 MB
AGK-LOLLIPOP-V1.6.zip - 4.08 MB
AGK-LOLLIPOP v1.5-Aroma.zip - 8.55 MB
AGK-LOLLIPOP-V1.5.zip - 4.10 MB
AGK-LOLLIPOP v1.4-Aroma.zip - 8.54 MB
AGK-LOLLIPOP-V1.4.zip - 4.09 MB
AGK-LOLLIPOP v1.3-Aroma.zip - 8.54 MB
AGK-LOLLIPOP-V1.3.zip - 4.09 MB
AGK-LOLLIPOP v1.2-Aroma.zip - 8.53 MB
AGK-LOLLIPOP v1.2-Aroma.zip - 8.53 MB : MIRROR
AGK-LOLLIPOP-V1.1.zip - 4.08 MB
AGK-LOLLIPOP-V1.1 - oc.zip - 4.09 MB Be carefull !!!
MIRROR: http://www.xup.to/dl,37250953/AGK-LOLLIPOP-V1.1.zip/
AGK-LOLLIPOP-V1.0.zip - 5.76 MB
Back to stock
If you want back to stock cm12 kernel without AGK features, just flash this!
You will flash the original cm12 kernel!!
back-to-stock.zip - 5.71 MB
Click to expand...
Click to collapse
Kernel Source:
https://github.com/antaril/AGK-LOLLIPOP
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Changelog:
AGK-LOLLIPOP V1.61 (AOSP)
-add msm sleeper
AGK-LOLLIPOP V1.21 (GPE)
-add smartmax
-add more scheduler
-add Thermal controle
-fix for intelli_plug
-add LCD colour adjust
AGK-LOLLIPOP V1.6 (AOSP)
-add simple GPU GOVERNOR
-compiled with Linaro 4.8
AGK-LOLLIPOP V1.5 (AOSP)
-add brand new iltellim governor (thx to faux123 for development)
-add preservative governer
-add OTG support
AGK-LOLLIPOP V1.4 (AOSP)
-complete adding kedex hardboot
AGK-LOLLIPOP V1.3 (AOSP)
- complete recoding features
-add underclocking Option in kernel settings
-if GPU OC and UC is enabled, GPU goes Form 64MHz-450MHz.
-if only OC is enabled GPU goes Form 128MHz- 487MHz
-if disabled GPU OC and UC it goes from 128MHz-400MHz (stock)
-should have better smoothness, please report!
AGK-LOLLIPOP V1.2 (AOSP)
-synched with newest CM source
-add ultra low GPU freq (experimental)
-add CPU/GPU OC/UC option in source (not activate in normal build)
-some changes in touch stuff
-now with AROMA installer
AGK-LOLLIPOP V1.1 (AOSP)
-add volt controll
-add governors
-deactivate all other hotplugs
-xz compressed
-and more...
AGK-LOLLIPOP V1.0 (AOSP)
-add touch stuff
-add BLN
-add Intelli-Plug
-add Sound controll
-add OC and UC
more coming soon ...
Click to expand...
Click to collapse
if you like my work... buy me a beer
Thank you. Testing [emoji106]
One cihazımdan Tapatalk kullanılarak gönderildi
I'll test it. I hope this kernel doesn't have SODs
I've been running it for maybe five minutes and it's smooth. I'll test it further.
How to use this features? I dont see any app to control kernel.
marcinowozniako said:
How to use this features? I dont see any app to control kernel.
Click to expand...
Click to collapse
trickster mod for example
Antaril said:
Here i bring you the first custom kernel for lollipop with all AGK typical features!!!!
AGK-Kernel Features:
- CPU UC/OC 81 mhz - 1836 mhz
- CPU Volt Controll
- GPU UC/OC 128 mhz - 487 mhz (only in special Version) PM
CPU Governor:
-smartmax -interactive -conservative -ondemand -userspace -powersave -Lionheart -performance -badass -intellidemand
-intelliactive -smartassV2 -lagfree -nightmare -wrexy
Scheduler:
-noop -deadline -row -cfg -fiops -sio
Wake:
-sweep2wake -flick2wake -flick2sleep -doubletap2wake -home2wake -pick2wake -pocket detection -logo2menu
-Zimage is XZ compressed
-Add some Bluetooth driver
-Add Generic Dynamic Voltage and Frequency Scaling (DVFS) support
-Add HTC GPIO headset detection driver
-Add Line6 USB support
-Add intelli Plug new
-Add alucard hotplug new
-Add MSM Hotplug new
-Add CPR (core power reduction) new
Hotplug:
its always mpdecision and intelliplug.
if somebody like others like MSM or Alu, i can Build it!
DOWNLOAD:
AGK-LOLLIPOP-V1.0.zip - 5.76 MB
Kernel Source:
just uploading...
Click to expand...
Click to collapse
Damn son u fast!!
Ha!!! Here we go!!!
Everything works. [emoji16]
And long press logo is sleep.
Is this kernel better in terms of battery life than the stock kernel?
Also why does the screen turn back on sometimes or off when I pick it up? Lol
could it add kexect-hardboot?
LoneFlac said:
Is this kernel better in terms of battery life than the stock kernel?
Also why does the screen turn back on sometimes or off when I pick it up? Lol
Click to expand...
Click to collapse
you have to use trickster mod and go to the wake options... there you can see pick2wake! deactivate it, if you like!
I have the feeling that the kernel makes CM a bit more laggy instead of smooth...
Scrolling feels laggy but other then that everything is fantastic
Running great on M7VZW, thanks brohan!
great job. will try and feed back
alistondsouza said:
@Antaril...
https://plus.google.com/104557258779291557233/posts/HoaxL6GHdse
Click to expand...
Click to collapse
thx man
new version out there
your not the first my kernel has been L ready for about 3 weeks but theres been no reason to release an L kernel because before now there has been no roms
cannondaleV2000 said:
your not the first my kernel has been L ready for about 3 weeks but theres been no reason to release an L kernel because before now there has been no roms
Click to expand...
Click to collapse
but now there are
i have try your kernel... good work!! But not with Lollipop, just KitKat
Related
Base Kernel Linux 3.0.74
-----------------------------------------------
Compiled with Christopher83 Linaro Toolchain 4.7.3 with cortex_a8 and neon optimization
-----------------------------------------------
init.d Tweaks Support
-----------------------------------------------
Governors :
Ondemand
Interactive
Performance
Powersave
Conservative
SmartAss v2
InterActiveX
Userspace
Lionheart
Lulzactive
SmartAss V3
OndemandX
HYPER
Fantasy
Virtuous
-----------------------------------------------
I/O-Schedulers
BFQ
CFQ
Deadline
Noop
S-i/o
Row
Fifo
Ram Avaible = 376mb in BIGMEM / 393 mb in HIGHMEM
-----------------------------------------------
Extreme UnderVolt ( thanks a diablo555)
24,576 Mhz - 750 mV
61,440 Mhz - 750 mV
122,880 Mhz - 750 mV
----------------------------------------------
184,320 Mhz - 750 mV
245,760 Mhz - 750 mV
368,640 Mhz - 800 mV
768,000 Mhz - 925 mV
-----------------------------------------
806,400 Mhz - 950 mV
902,400 Mhz - 1000 mV = 1V
-----------------------------------------
1017,600 Mhz - 1025 mV
1113,600 Mhz - 1025 mV
1209,600 Mhz - 1050 mV
1305,600 Mhz - 1075 mV
1401,600 Mhz - 1100 mV
1516,800 Mhz - 1150 mV
1555,200 Mhz - 1175 mV
1612,800 Mhz - 1200 mV
1651,200 Mhz - 1225 mV
1708,800 Mhz - 1250 mV
1766,400 Mhz - 1275 mV
----------------------------
1804,800 Mhz - 1300 mV
1824,000 Mhz - 1325mV
------------------------------------------------
Overclock to 1824 mhz( thanks diablo555) !!
-------------------------------------------------------------------------------
NoJpegCompression
-------------------------------------------------
AVS (Adaptive Voltage Scaling)
Fast Charge
BLX ( BatteryLifeExtender )
FSync
SnapDragon Optimization
Google Snappy Zram
LZ4 compression / decompression
VDD Voltage Control ( min uv set 710 ) ( use incredicontrol to change values )
CleanCache Driver
Armv7 and Linaro Optimization
-------------------------------------------------------
BLN9 ( use nstools or bln control )
What's Work
Call and messages
HW acceleration
USB mass
Deepsleep
Bluetooth
Camera
Audio
GPS
Ecc...
Solved SOD problem !! ( thanks arco )
WiFi
Vsync
BigMem 370mb with camera 5mp and 720p working
What's Doesn't Work
in HIGHMEM 720p break
Screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mod Edit: Link Removed
CHANGELOG IN THE 2 POST
my sources : https://github.com/biagio7xD
CREDITs:
BIG THANKS FOR CHRISTOPHER FOR HIS HELP !!
DOOMSDAY94
Diablo55 for helped my
Castagna for row schedular
xistance for his guide
arco for his source
Christopher83 for his toolchain and his source
voku to vokulmk
cyanogen team =D
and other =))
Changelog
Code:
[FONT=Century Gothic]Version RC3 [/FONT]
[LIST]
[*]update to 3.0.74
[*]sync with arco sources
[*]better ui perfomance
[*]new script for improvments
[*]Low touchscreen voltage
[*]Phantom Key Presses filtering
[*]new tweak for battery
[/LIST]
[FONT=Century Gothic]Version RC2 [/FONT]
[LIST]
[*]update to 3.0.73
[*]sync with arco
[*]modded lcd driver
[*]RE-ADDED CMBLN !!!!!
[*]dinamyc sync
[*]some optimization
[*]use SLQB
[*]use -O2 optimization
[*]charge now is 100%
[/LIST]
[FONT=Century Gothic]Version RC1 [/FONT]
[LIST]
[*]sync with arco sources
[*]sync with ivendor Sources
[*]update to 3.0.72
[*]tweak swappiness
[*]very low swappiness
[*]tweak deadline
[*]update 3.0.71
[*]black writeback page tweak created by me ( less lag when screen is on and less wakeups when screen is off )
[*]8% perfomance incresead thanks to some additional tweak and modd created by me
[*]Optimized SD card read/write speed
[*]mm/writeback: some adjustment
[*]LMK: Added screen on/off values and tunes some more. ( thank voku)
[*]Added whiteback tweak during screen on/off (franco)
[*]remove some unnecessary optimization
[*]Some Tweak To Ramdisk ( thanks castagna and ezekeel )
[*]some fix
[*]FIX BLX now work correct
[*]some new TWEAK
[*]NEW BOOTSPLASH
[*]cyanogenMod Team Tweak and Fix in some file
[*]ADD NEW DRIVER DISPLAY BIG THANKS CASTAGNA
[*] Avaible only SuperMem and exUV version for now
[/LIST]
-------------------------------------------END Beta Release -------------------------------------------------------
[FONT=Century Gothic]Version Beta II [/FONT]
[LIST]
[*]update 3.0.70
[*]Fixed Makefile of the compressed image to better support Linaro GCC 4.7 and armv7
[*]DYNAMIC COMPRESSION of clean page
[*]DYNAMIC COMPRESSION osf swap page
[*]Added RAM_CONSOLE support!
[*]Added dynamic read-ahead
[*]increased audio volume
[*]incresed net speed
[*]fix BLN9
[*]removed CMbln
[*] Sync with latest Ivendor / arco Sources
[*] add vibration regulator
[/LIST]
[FONT=Century Gothic]Version Beta I [/FONT]
[LIST]
[*]added VIRTOUS governor
[*]added HYPER governor
[*]add FANTASY governor
[*]add ENTROPY tweak
[*]add -O3 optimization in gpu
[*]tune lulzactive
[*]tune ondemand
[*]Fix cpu alignment
[*]Adjust virtual memory ratios
[*]Increase MAX Readahead to 1024 and MIN Readahead to 32
[*]Perform Snapdragon optimizations
[*]Backport AIO (Asynchronous IO) from Linux 3.5
[*]Improve memcopy/memmove
[*]Kill task closest
[*]more tweak battery/perfomance
[*]-O3 Optimization in gpu!
[*]Unaligned acces
[*]optimize SLUB ( thanks kasperhettinga )
[*]Sound Control
[*]BLN9 ( thanks krislibaeer....castagna and htc desire forum )
[/LIST]
[FONT=Century Gothic]Version V9.3.1[/FONT]
[LIST]
[*]update kernel base : 3.0.69
[*]16kb kernel buffer size
[*]new linaro toolchain ( thanks christopher )
[/LIST]
[FONT=Century Gothic]Versione V9.3[/FONT]
[LIST]
[*]reworked kernel form 0 with ivendor sources
[*]linaro optimization
[*]snapdragon optimization
[*]neon optimization
[*]use LZ4 compression/decompression
[*]lzo tune
[*]nexus governo fix
[*]fifo schedular I/O
[*]unaligned_access
[*]Applying Linaro Topology drivers
[*]sync with lates ivendor source
[*]sync with nexus kernel v9.2
[*]add more optimization
[*]lower swappines: 20
[*]add Optimized ARM RWSEM algorithm ( thank stratosk )
[*]add fsync
[*]add perfomance tweak thanks faux123
[*]Added O3 optimization for modules ( thanks christopher )
[*][PATCH] cpufreq: smooth scrolling (thanks to [user=635848]@gork[/user]hanmoral)
[*]lowmemorykiller and fugeswap modified
[*]use SLUB optimized
[*]-O3 optimization
[*]Glitch free GPU frequency changing
[*]tune ondemand and smartassv2
[*]Linaro CIFS Fix
[*]cleancache driver
[*]ADDED VOLTAGE CONTROL ( thanks ezekeel ) ( min uv is 710 )
[/LIST]
[FONT=Century Gothic]Versione V9.2[/FONT]
[LIST]
[*]update to 3.4.35
[*]Lowered WIFI voltage (Thanks to CastagnaIT)
[*]Lowered display panel voltage (Thanks to CastagnaIT)
[*]Implemented Google snappy compression / decompression
[*]Enable Google snappy ZRAM
[*]Snapdragon optimizations
[*]Enable SWAP, CISF, NLS_UTF8. NTFS, PPP_SYNC_TTY, PPP_ASYNC and fix CIFS
[*]mod wifi signal
[*]add lz4 compression and decompressione
[*]use lz4
[*]new bootsplash
[*]increased boot time ( now is very fast ! )
[*]more perfomance
[*]more battery tweak
[*]add more optimization
[/LIST]
[FONT=Century Gothic]Versione V9.1[/FONT]
[LIST]
[*]used 3.4.33 base
[*]add some battery / perfomance tweak
[*]add VOKULMK
[*]add fsync
[*]fix deepsleep
[*]add NEON optimization
[*]add more optimization
[*]new BIGMEM values ( now we have 377 mb with all work )
[*]add new governor created by me " NEXUS GOVERNOR "
[*]add smooth tweak
[*]add fast optimization
[*]low swappiness
[*]add perfomance tweak ( thanks faux123)
[*]add fsync ( thanks ezekeel )
[*]add frandom
[*]allow cpu based alignement handing
[*]asynchronous I/O latency
[*]optimized arm rwes algorithm
[*]used sha224 and sha384 routines
[*]add SMARTASSV3 governor
[*]fix my NEXUS governor
[*]32kb Kernel Log Buffer Size
[*]SLUB
[/LIST]
---------------------------STOP 3.0.X VERSION OF KERNEL----------------------------------------------
[FONT=Century Gothic]Versione V9.0[/FONT]
[LIST]
[*]update to 3.0.66-rc1
[*]-O2 optimization
[*]setted 245-1401 default frequency
[*]used new toolchain by christopher !
[*]added more optimization
[*]added new arm optimization
[*]added new lowmemorykiller aggressive
[*]add new toolchain optimization
[*]new bootsplash !!
[*]aumented readahead workaround
[*]modify logger.c
[*]lower swappines : now is 40
[*]add frandom
[*]sound hack
[*]swap pages tweak ( thanks hadidjapri )
[*]add network boost tweak
[*]Glitch free GPU frequency changing ( thanks castagna ! )
[*]new tweak for smooth
[*]add more optimization for arm !!
[*]new HIGHMEM values
[*]new BIGMEM values
[*]added blx ( thanks christopher )
[/LIST]
[FONT=Century Gothic]Versione V8.0[/FONT]
[LIST]
[*]update to 3.0.64
[*]added arm cortea8 optimization
[*]added neon optimization
[*]increasing boot speed
[*]added aggressive lowmemorykiller parameters
[*]add wifi tweak
[*]Add optimized AES and SHA1 routines ( thanks castagnaIT )
[*]add new BIGMEM values ( 368mb)
[*]add new HIGHMEM values ( 400mb )
[*]fix camera and video record
[*]added scary-lazy-intellidemand-lionheart governor
[*]add more optimization
[*]add -o3 modules optimization ( thanks doomsday)
[*]16 kb buffer size
[*]SLQB
[*]and other fix
[/LIST]
[FONT=Century Gothic]Versione V7.0[/FONT]
[LIST]
[*]added fifo I/O
[*]added wifi battery saver tweaks
[*]added lowmemorykiller new parameters
[*]battery 100%
[*]32kb buffer size
[*]added test sound hack
[*]SLQB
[*]-O3 optimization
[*]smooth tweaks
[*] adjust jpeg quality ( thanks ivendor )
[*]and other fix :)
[/LIST]
[FONT=Century Gothic]Versione V6.0[/FONT]
[LIST]
[*]Fix camera and video recorde
[*]Fix BIGMEM values ( now we have 370 mb in BIGMEM kernel )
[*]Fix HW video
[*]-O3 optmization
[*]SLQB
[*]Fast Charge ! ( use nstools for enable it )
[*]Fix governor
[*]Added VR I/O schedular
[*]64 kb kernel log buffer size
[*]set 1401 - 245 default frequency
[*]Fix AVS
[*]and fix other script =)
[/LIST]
[FONT=Century Gothic]Versione V5.1.1[/FONT]
[LIST]
[*]fix camera
[*]fix BIGMEM now we have 371 mb with all work !!
[/LIST]
[FONT=Century Gothic]Versione V5.0.0[/FONT]
[LIST]
[*]updated to 3.0.62
[*]added lulzactive
[*] fix smoothass
[*] -O3 optimization
[*] SLQB
[*] BIGMEM with camera 5mp and video 720 workin ( big thanks doomsday94 )
[*] AVS
[*] NoJpegCompression
[*] added Fantasy ( thanks castagna )
[*] added more fix
[*] and other fix =)
[/LIST]
[FONT=Century Gothic]Versione V4.1.5[/FONT]
[LIST]
[*]Camera (5mp and 720p ) work perfect
[*]-O2 optimization
[*]SLQB
[*]AVS fix
[*]Removed S I/O for add fix
[*]Fix some script
[*]NEW BOOTSPLASH EHNDROIX MINIMAL !!
[*]lRam avaible : 347 mb
[/LIST]
[FONT=Century Gothic]Versione V4.1.0[/FONT]
[LIST]
[*]update to 3.0.61
[*]camera work
[*]video work
[*]-O3 optimization
[*]SLQB ram allocator (thanks christopher83)
[*]extreme undervolt !
[*]fix governor
[*]fix i/o schedular
[*]compiled linaro toolchain 4.7.3 di christopher
[*]Neon optimization
[*]Linaro Optimization
[*]Some toolchain optimization
[*]fix some script
[*]AVS !!
[*]Buffer Size reduced to 32 kb
[*]NormalMem (368 mb di ram Avaible )
[*]fix Governor : SavagedZen - Smoothass - InterActiveX - BrazilianWax- Smartassv2- Userspace
[/LIST]
We'll try it soon
Great, new kernel.
Good luck!
Moved my replay here because of changelog.
What Governor/Scheduler have you chosen to get performance showed on picture?
Thread temporarily closed.
EDIT:
Thread reopened!
AW: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
Sorry bro, but instantly after i enter my PIN my phone freezes. Had to take the Battery out.
Sent from my GT-I9001 using xda app-developers app
I was try this on CyanogenMod 10.1 Alpha 2 but didn't work.
Phone was stuck after Samsung logo...
R: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
vellkan said:
I was try this on CyanogenMod 10.1 Alpha 2 but didn't work.
Phone was stuck after Samsung logo...
Click to expand...
Click to collapse
You install a 4.2 version ??
I and other guys on androidiani test a kernel and it works perfectly
Inviato dal mio GT-i9001 con Tapatalk 2
vellkan said:
I was try this on CyanogenMod 10.1 Alpha 2 but didn't work.
Phone was stuck after Samsung logo...
Click to expand...
Click to collapse
So far no kernels have worked on my ROM other than my own. I'm waiting to see the day it actually does. If you don't mind could you tell me if it was a black screen and only the LED's turned on if you touched them or just stuck on the samsung logo.
Thank you for this new Kernel!
For me, works great. Antutu was okay and now i test it for the next 24 hours. :good:
R: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
Xistance said:
So far no kernels have worked on my ROM other than my own. I'm waiting to see the day it actually does. If you don't mind could you tell me if it was a black screen and only the LED's turned on if you touched them or just stuck on the samsung logo.
Click to expand...
Click to collapse
3 days ago i tested your rom with my kernel and it is perfect but camera doesnt work
Inviato dal mio GT-i9001 con Tapatalk 2
Odp: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
Can anyone tell something more about the battery drain?
Wysłane z Nexus 7 dzięki Swype i Tapatalk.
Re: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
Pattttti said:
Can anyone tell something more about the battery drain?
Wysłane z Nexus 7 dzięki Swype i Tapatalk.
Click to expand...
Click to collapse
It's still fresh, someone needs to test it...
Sent from my GT-I9001 using Tapatalk 2
I'm still having the same problems as with the Kernel bundled with CM10 Alpha 7, a excessive RAM consumption with almost no RAM left, the low memory killer keeps terminating my Apps. Never had that issue on Kernel 2.6, I have no running bloatware if that matters. Just after a cold boot I have around 160MB free but after a few minutes I'm down to 5-10MB
Installed the normal version and it works perfectly on cm10 by ivendor (except the video recording at 720p).
I've tried all the new kernels and it seems that is the best!
Smooth, fast, without any lag! It remains to see how it goes with battery consumption.
Thanks biagio7xD!
any1 confirm this kernel working on 4.2.1
R: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
yowanvista said:
I'm still having the same problems as with the Kernel bundled with CM10 Alpha 7, a excessive RAM consumption with almost no RAM left, the low memory killer keeps terminating my Apps. Never had that issue on Kernel 2.6, I have no running bloatware if that matters. Just after a cold boot I have around 160MB free but after a few minutes I'm down to 5-10MB
Click to expand...
Click to collapse
I used a normalmem and i have 140 mb free....
Inviato dal mio GT-i9001 con Tapatalk 2
Υes there is an error here, but is so perfect kernel!
R: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
TwinHeadedEagle said:
It's still fresh, someone needs to test it...
Sent from my GT-I9001 using Tapatalk 2
Click to expand...
Click to collapse
I have used It since the first release and is working fine for me
Inviato dal mio GT-I9001 con Tapatalk 2
workes on AOSP based ROMZ
just like:
-CM11 -TeamEOS AOSP -pacman nightly -beanstalk -carbonrom -liquismooth
and more...
AGK-Kernel Features:
- CPU UC/OC 81 mhz - 1836 mhz
- CPU Volt Controll
- GPU UC/OC 128 mhz - 487 mhz (only in special Version) PM
CPU Governor:
-smartmax -interactive -conservative -ondemand -userspace -powersave -Lionheart -performance -badass -intellidemand
-intelliactive -smartassV2 -lagfree -nightmare -wrexy
Scheduler:
-noop -deadline -row -cfg -fiops -sio
Wake:
-sweep2wake -flick2wake -flick2sleep -doubletap2wake -home2wake -pick2wake -pocket detection -logo2menu
-Zimage is XZ compressed
-Add some Bluetooth driver
-Add Generic Dynamic Voltage and Frequency Scaling (DVFS) support
-Add HTC GPIO headset detection driver
-Add Line6 USB support
-Add intelli Plug new
-Add alucard hotplug new
-Add MSM Hotplug new
-Add CPR (core power reduction) new
Hotplug:
its always mpdecision and intelliplug.
if somebody like others like MSM or Alu, i can Build it!
I have switched to new fresh Kernel Source. The old builds are working with the most AOSP Romz. If you cant switch on wifi, try the new AGK Kernel. Download and source code will be here in thread! I let the old build online, so you can choose the best Kernel for you! Every Custom Rom is special, so just try!
Download new Kernel:
AGK-CM-BASED-v1.4.zip - 4.08 MB
AGK-CM-BASED v1.3-Aroma.zip - 8.53 MB
AGK-CM-BASED-v1.3.zip - 4.08 MB
AGK-CM-BASED-v1.3 - OC-VERSION.zip - 4.08 MB ATTENTION USE IT AT YOUR OWN RISK CPU up to 2.1GHz GPU up to 487MHz
AGK-CM-BASED v1.2-Aroma.zip - 8.52 MB
AGK-CM-BASED-v1.2.zip - 4.07 MB
AGK-CM-BASED-v1.1.zip - 4.08 MB
AGK-CM-BASED-v1.0.zip - 4.07 MB
Link to source: https://github.com/antaril/AGK-CM-BASED
History:
AGK CM Based Kernel v1.4
-add simple GPU Governor
-add intellim Governor
-add AGK-Lollipop features (GPU UC/OC CPU OC/UC options)
AGK CM Based Kernel v1.3
-add more scheduler
-fix pocket detection,pick2wake and flick2wake for all AOSP Roms
-merge new CM comits
AGK CM Based Kernel v1.2
-add a lot of fixes and stuff
-fix wake gestures
-add sound control
AGK CM Based Kernel v1.1
-Set VM_MAX_READAHEAD to 2048
-update intelliplug code
-overclock slimbus for best audio quality!!
-add more cpu stepps... OC and UC
-give more vcore room. For OC and UC
-Adding h2w/l2w/s2w/logo2menu/long tap sleep
AGK CM Based Kernel v1.0
-add sound control
-add intelli plug
-add governors
-add sheduler
-add volt controll
-add tweaks
-add CPU UC and little OC
-add bln
-add hotplugs
more coming soon...
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------
OLD KERNEL (stopping dev)
Link to source: https://github.com/antaril/AGK
Click to expand...
Click to collapse
History:
AGK Kernel v1.19
-refresh WIFI code
-refresh bluetooth code
AGK Kernel v1.18
-Set VM_MAX_READAHEAD to 2048
-change vref_core if oc is enable
-add ultra low cpu clock (81mhz)
-set lower .vreg[VREG_CORE] if OC is disabled
AGK Kernel v1.17
-add custom boot animation
-try to fix installation bug by 0% please report
-try to fix some wifi problems please report!!
AGK Kernel v1.16
-add "blinkin button mod" change it in AROMA
-fixing pocket detection when suspended
AGK Kernel v1.15
-fix intelli plug
-add msm hotplug (not active)
AGK Kernel v1.14
-add intelli plug
-add alucard hotplug (not active)
-add CPR (core power reduction)
-add wrexy governor
-add nightmare governor
-add Modules support
AGK Kernel v1.12
-Add Generic Dynamic Voltage and Frequency Scaling (DVFS) support
-Add HTC GPIO headset detection driver
-Add Line6 USB support
AGK Kernel v1.11
- compiled with XZ compression
AGK Kernel v1.1
-standard Governor smartmax
-standard Scheduler fiops
-Linaro 4.7 compiled
-Bluetooth fix
new Governors
-intellidemand
-intelliactive
-smartassV2
-badass
-lagfree
new Schedulers
-fiops
-sio
Click to expand...
Click to collapse
DOWNLOAD:
AGK Kernel v1.19
Aroma Link:AGK_Kernel - v1.19-Aroma.zip - 8.51 MB
AGK Kernel v1.18
Aroma Link: AGK_Kernel - v1.18-Aroma.zip - 8.52 MB
Non Aroma Link: AGK_Kernel - v1.18-nonAroma.zip - 4.07 MB
-Set VM_MAX_READAHEAD to 2048
-change vref_core if oc is enable
-add ultra low cpu clock (81mhz)
-set lower .vreg[VREG_CORE] if OC is disabled
Special Versions:
AGK_Kernel - v1.24-DU.zip - 4.03 MB Based on MSM9860 Kernel Source! Once createt especially for Dirty Unicorns Rom, now it works with a lot AOSP based ROMZ.
AGK_Kernel - v1.15-Aroma.zip - 8.52 MB OC-VERSION only for people who know what they do!!
AGK_Kernel - v1.15-MSM-Aroma.zip - 8.52 MB MSM Hotplug
AGK_Kernel - v1.15-alu-Aroma.zip - 8.52 MB alucard hotplug
AGK_Kernel - v1.15-nohot-Aroma.zip - 8.52 MB no alternative hotplugs!!
AGK_Kernel - v1.15.zip - 3.79 MB classic recovery
thx to: faux123, team7, neobuddy89, myfluxi, Se Hun Kim, and especially AuxXxilium for his help!!!
Desperately wating for AOSP KERNEL. thanks man:::
does it has AROMA INSTALLER.....?
hiimimtayaz said:
Desperately wating for AOSP KERNEL. thanks man:::
does it has AROMA INSTALLER.....?
Click to expand...
Click to collapse
no classic recovery
Antaril said:
Here is my own Kernel! Try and give responce please!
Click to expand...
Click to collapse
Can we get a link to your kernel source please.
Thanks.
Andy said:
Can we get a link to your kernel source please.
Thanks.
Click to expand...
Click to collapse
sorry iam from germany, so my english is not very good.
the source is on my computer.
i download the ground source from github and add OC/UC governors,scheduler and some patches.
iam not a coder, i think iam a modder! sorry i hope this is ok
i can upload my source to github if this is possible
Antaril said:
i can upload my source to github if this is possible
Click to expand...
Click to collapse
Yes please. In order to be GPL compliant, the source required to build the exact same kernel needs to be available.
Thanks.
Andy said:
Yes please. In order to be GPL compliant, the source required to build the exact same kernel needs to be available.
Thanks.
Click to expand...
Click to collapse
In first post, you can see the link to source code!
Antaril said:
In first post, you can see the link to source code!
Click to expand...
Click to collapse
Thank you very much.
Andy said:
Thank you very much.
Click to expand...
Click to collapse
you are welcome
I wanted a AOSP kernel as well. we have over 20 kernels all are sense. finally. thanks,
Will try, finally a kernel with s2w and dt2w, thanks!
Sent from my HTC One using XDA Premium 4 mobile app
first hardcore AOSP kernel and the guy only has a few likes? c'mon people, I don't even use AOSP, but that $h17 deserves some thanks!
Needs a better download host or a mirror ..site won't load on my cell and I won't install a third party app to download it
Sent from my One using XDA Free mobile app
Yeah...we need a download source that doesn't require an app. Then I'll give it a go.
Sent from my One using XDA Premium 4 mobile app
chillybean said:
Needs a better download host or a mirror ..site won't load on my cell and I won't install a third party app to download it
Click to expand...
Click to collapse
badams1 said:
Yeah...we need a download source that doesn't require an app. Then I'll give it a go.
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Please find here a Mirror. If the author of the kernel has anything against the mirror, please let me know otherwise he may do with it whatever he wants
Mirror at zippyshare
Here's another mirror:
https://www.dropbox.com/s/sap95hm0j7fsvkz/AGK_Kernel - v1.11.zip
Sent from the Thing that should not be.
Finaly. Anyone tested on liquidsmooth
Sent from my One using Tapatalk
thx "No_Fear"
add link to first thread
Thanks for supporting aosp
Inviato dal mio HTC One utilizzando Tapatalk
Downloading now. Always appreciative for additional options.
Sent from my One
Aur-kernel for xz5x
- Features
Compiled with gcc 4.9.4 (UBERTC)
Powersuspend
Thunderplug
Frandom
Vnswap
Dynamic sync
Fast charge
Underclocking.
Sio and fiops i/o shedulers
Faux sound control
NVIDIA power efficiency patches
Enabled power_efficient workqueues
Optimized memset - memcpy
Usb fastcharge
Drive droid support - mount cdrom
Kcal color control (thanks to @savoca)
Module param to change the thermal throttle temperature
Various performance/stability optimizations
- Changelog-Marshmallow
Aur-Kernel_Xz5x _E6xxx _v3.0
-Based on sony kernel source fw 32.1.A.1.185 marshmallow
-ARM64 CRC32 hw accelerated module
-Interactive governor optimizations
-Ipv4 window size to 64K (speed improvement)
-Add a module param to change the thermal throttle temperature
-Implemented task's adj rbtree
-Increased the buffer-head per-CPU LRU size
-Adreno idler for devfreq
-Added sysinterface for GENTLE_FAIR_SLEEPERS
Aur-Kernel_Xz5x _E6xxx _v2.0
-Based on sony kernel source fw 32.1.A.1.163 marshmallow
-First release for mm
-All features and patches from aur-kernel LL
FOR MORE CHECK GITHUB AUR KERNEL
- Changelog-Lollipop
Aur-Kernel_Xz5x _E6xxx _v1.2.5
-BFQ and ZEN i/o schedulers
-Enabled power_efficient workqueues
-Drive droid support - mount cdrom
-UPDATE :NVIDIA power efficiency patches
-Allow 320K AAC encoding
-Added new driver for on/off operations
-Enable L1/L2 clock gating WA
Aur-Kernel_Xz5x _E6xxx _v1.2.4
NVIDIA power efficiency patches
-Usb fastcharge
-Add audit support
-Memory utilities optimization
-Activate additional 27 MHz gpu frequency step
-Tweaks to reduce lags improve battery life
Aur-Kernel_Xz5x _E6xxx _v1.2.3
-Removed msm hotplug
-Cleaned some patches
-Add underclocking....
Powersuspend
Thunderplug
Frandom
Vnswap
Dynamic sync
-More kernel optimizations
Aur-Kernel_Xz5x _E6xxx _v1.2.2
-Introduce new relation for freq selection
-Optimizations on cpu-boost <integrated with hotplug driver and cpufreq governor>
-Added Impulse governor
-Prevent the driver from handling userspace on msm performance
-Added a simple api to query the display state (on/off)
-Enabled arch power
-Optimized make file for cortex-a57
-Added power quickwakeup
-Optimize ksm
-Added msm hotplug driver
-Added hotplug enable toggle
-Added a module param to change the thermal throttle temperature
Aur-Kernel_Xz5p _E68xx _v1.2
- Enabled x-reality,etc.. -Thanks to tobias.wadvogel
- Add sio and fiops i/o shedulers
- Make input boosting optional
- Implement task's adj rbtree
- Skip dying or exiting task
- Maintain LMK rbtree with signal->adj_node
- Reduce the rate of needless idle load balancing
- Stop searching for tasks in newidle balance
- Enable UFS ICE
Aur-Kernel_Xz5p _E68xx _v1.1
- Removed tomtomsound control
- Added faux sound control
- Kcal color control (thanks to @savoca)
- Various performance/stability optimizations
SEE MORE ON GITHUB
Aur-Kernel_Xz5p _E68xx _v1
- Based on fw 32.0.A.6.200
- Compiled with gcc 4.9.3 (UBERTC)
- Disabled dm_verity
- Selinux enforcing
- Tomtom sound control by Tom G.
- Kernel Marshmallow :
Aur-Kernel_Xz5p _E6853 _v4.0
Aur-Kernel_Xz5p _dsds _v4.0
Aur-Kernel_Xz5 _E6653 _v4.0
Aur-Kernel_Xz5 _dsds _v4.0
Kernel_Xz5p _E6853_fw224-STOCK
Kernel_Xz5p _DUAL_fw224-STOCK
Kernel_Xz5 _E6653_fw224-STOCK
Kernel_Xz5 _DUAL_fw224-STOCK
- Kernel Lollipop :
Kernel_Xz5 _E6653 _v1.2.5
Kernel_Xz5p _E6853 _v1.2.5
Kernel_Xz5p _E6853 _v1.2.1 overclock-drm fix
Kernel_Xz5p _E6883 _v1.2.5
Kernel_Xz5p _E6883 _v1.2.1 overclock-drm fix
INSTALL KERNEL ADIUTOR FROM PLAY STORE TO MAKE CHANGES AND ThunderZap Control FOR Thunderplug
SEE MORE ON GITHUB
Kernel Source :
Aur kernel
Thanks Too :
tobias.waldvogel for drm fix
flar2
franciscofranco
AndroPlus
Tommy-Geenexus
- I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY CAUSE YOUR DEVICE
- If you appreciate my work qualifies with 5 stars
- If you appreciate my work and dedication
Feel free to donate
RESERVED
Thank bro
Hy
Is this for Customized Locked BL Kernel?
Gesendet von Rotwild G1 Gravity
get2easy said:
Hy
Is this for Customized Locked BL Kernel?
Gesendet von Rotwild G1 Gravity
Click to expand...
Click to collapse
Custom kernels will never work with locked BL
Sent from my Z5 Premium using XDA Labs
Thx for the Information
Gesendet von Rotwild G1 Gravity
auras76 said:
- Features
Compiled with gcc 4.9.4 (UBERTC)
Powersuspend
Thunderplug
Frandom
Vnswap
Dynamic sync
Underclocking.
Sio and fiops i/o shedulers
Faux sound control
NVIDIA power efficiency patches
Enabled power_efficient workqueues
Optimized memset - memcpy
Usb fastcharge
Drive droid support - mount cdrom
Kcal color control (thanks to @savoca)
Module param to change the thermal throttle temperature
Various performance/stability optimizations
- Changelog-Marshmallow
- Changelog-Lollipop
Aur-Kernel_Xz5x _E6xxx _v1.2.5
-BFQ and ZEN i/o schedulers
-Enabled power_efficient workqueues
-Drive droid support - mount cdrom
-UPDATE :NVIDIA power efficiency patches
-Allow 320K AAC encoding
-Added new driver for on/off operations
-Enable L1/L2 clock gating WA
Aur-Kernel_Xz5x _E6xxx _v1.2.4
NVIDIA power efficiency patches
-Usb fastcharge
-Add audit support
-Memory utilities optimization
-Activate additional 27 MHz gpu frequency step
-Tweaks to reduce lags improve battery life
Aur-Kernel_Xz5x _E6xxx _v1.2.3
-Removed msm hotplug
-Cleaned some patches
-Add underclocking....
Powersuspend
Thunderplug
Frandom
Vnswap
Dynamic sync
-More kernel optimizations
Aur-Kernel_Xz5x _E6xxx _v1.2.2
-Introduce new relation for freq selection
-Optimizations on cpu-boost <integrated with hotplug driver and cpufreq governor>
-Added Impulse governor
-Prevent the driver from handling userspace on msm performance
-Added a simple api to query the display state (on/off)
-Enabled arch power
-Optimized make file for cortex-a57
-Added power quickwakeup
-Optimize ksm
-Added msm hotplug driver
-Added hotplug enable toggle
-Added a module param to change the thermal throttle temperature
Aur-Kernel_Xz5p _E68xx _v1.2
- Enabled x-reality,etc.. -Thanks to tobias.wadvogel
- Add sio and fiops i/o shedulers
- Make input boosting optional
- Implement task's adj rbtree
- Skip dying or exiting task
- Maintain LMK rbtree with signal->adj_node
- Reduce the rate of needless idle load balancing
- Stop searching for tasks in newidle balance
- Enable UFS ICE
Aur-Kernel_Xz5p _E68xx _v1.1
- Removed tomtomsound control
- Added faux sound control
- Kcal color control (thanks to @savoca)
- Various performance/stability optimizations
SEE MORE ON GITHUB
Aur-Kernel_Xz5p _E68xx _v1
- Based on fw 32.0.A.6.200
- Compiled with gcc 4.9.3 (UBERTC)
- Disabled dm_verity
- Selinux enforcing
- Tomtom sound control by Tom G.
- Kernel Marshmallow :
Kernel_Xz5p _E6853_fw163-STOCK
Kernel_Xz5p _E6883_fw163-STOCK
Kernel_Xz5 _E6653_fw163-STOCK
Kernel_Xz5 _E6683_fw163-STOCK
- Kernel Lollipop :
Kernel_Xz5 _E6653 _v1.2.5
Kernel_Xz5p _E6853 _v1.2.5
Kernel_Xz5p _E6853 _v1.2.1 overclock-drm fix
Kernel_Xz5p _E6883 _v1.2.5
Kernel_Xz5p _E6883 _v1.2.1 overclock-drm fix
INSTALL KERNEL ADIUTOR FROM PLAY STORE TO MAKE CHANGES
SEE MORE ON GITHUB
Kernel Source :
Aur kernel
Thanks Too :
tobias.waldvogel for drm fix
flar2
franciscofranco
AndroPlus
Tommy-Geenexus
Click to expand...
Click to collapse
FYI for other early adopters: None of the features implemented in e6653 mm kernel
goRt said:
FYI for other early adopters: None of the features implemented in e6653 mm kernel
Click to expand...
Click to collapse
Working on it.
With new aur custom kernel for 6853 for MM faux sound doesn't work.seems that feature are not implemented
leobiagi said:
With new aur custom kernel for 6853 for MM faux sound doesn't work.seems that feature are not implemented
Click to expand...
Click to collapse
Mm kernel is near stock as of now I assume. Drm fix and selinux enforcement has been done. This allows the basic rooting of the phone .
I think he is working on a custom kernel based on MM for the device , so wait for a while maybe
hi, the new kernel (Aur-Kernel_Xz5p _E6853 _v2.0) for your MM rom i install simply by flash from recovery? Or adb method?Thank you, auras!!!!
Eddiejam72 said:
hi, the new kernel (Aur-Kernel_Xz5p _E6853 _v2.0) for your MM rom i install simply by flash from recovery? Or adb method?Thank you, auras!!!!
Click to expand...
Click to collapse
On recovery.
The kernel is running smooth as of now thanks @auras76
Sent from my Sony E6883 using XDA Labs
What about e6833
How to enable hotplug?
Use Kernel adiutor from playstore
---------- Post added at 16:25 ---------- Previous post was at 15:25 ----------
Is it possible to make a permissive version of this kernel?
Black_Focus_X said:
Use Kernel adiutor from playstore
---------- Post added at 16:25 ---------- Previous post was at 15:25 ----------
Is it possible to make a permissive version of this kernel?
Click to expand...
Click to collapse
It is.
auras76 said:
It is.
Click to expand...
Click to collapse
Ok cool thanks
@auras, is it possible to restore fm radio without headset feature?
Thanks
hey the kernel for the Xz5 and the Xz5p on FW.163 is the same file, they are both for the Xz5p
Is this right? I am flashing the Xz5p one onto my E6653 and it doesn't work...
RKernel
Code:
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Custom kernel with some ThunderZap and other future
-Based on latest sources
- Compiled with GCC 4.8
-Aroma Installer (thank varun.chitre15)
-Switched to AnyKernel
-Compilled with gpu and neon optimized flags
-CPU Overclockable upto 1.5Ghz
-GPU Overclockable to 500Mhz
-New hotplug(Alucard | Itelli | msm)
-New governor
-New I/O Schedulers
-Add new TCP/IP
-Slightly speed up EXT4
-Switch to LZ4 kernel compression for faster boot
(better than XZ)
-Fast charge by @faux123
-Added zSwap from Linux 3.11
-Added frontswap
-Added vnswap
-Dynamic Fsync 2.0
-Intelli-thermal by @varun.chitre15
-CPU Voltage Control
-GPU Voltage Control [930 | 1000 | 1100]
-Smooth Scrolling Tweak
- Linux MM Readahead set to 512k
-Enable Aggressive Multi-Core Power Savings
-Disabled CRC check
-Disabled GENTLE_FAIR_SLEEPERS
-Enabled ARCH_POWER
-Optimizations to default SLUB allocator
-Patch for depleting entropy requiring no need of frandom or any rngd tweaks
-Asynchronous I/O latency to a solid-state disk greatly increased
-Faster NOATIME and NODIRATIME fs mounting flags
-Optimized apply_slack() method for size and speed
-Lock initial TCP window size to 64k (Improves network ping and output)
-Dynamic management of dirty page writebacks
- Improved IO throughput
- Merged some writeback patches to improve vmscan module
DOWNLOAD:
V4.0
Credits:
@varun.chitre15
@faux123
@Tomoms
XDA:DevDB Information
RKernel, Kernel for the Sony Xperia L
Contributors
rostifaner, cucumber09
Source Code: https://github.com/rostifaner/android_kernel_sony_msm8930
Kernel Special Features: Best feature nowadays
Version Information
Status: Stable
Created 2016-03-27
Last Updated 2016-10-21
Changelogs
V4.0
Fixed WI-FI
Based on latest sources
Fixed second core over-riding issue if using stock mpdecision
Deleted all hotplug(not needed now)
Update to latest f2fs
Fix some memory leaks
Deleted zSwap
Added zRam from latest source
Optimised memory routine
Added ThunderSonic Engine(tnank varun.chitre15)
Deleted current fast charge
Added Charger control(tnank varun.chitre15)
Enable optimized SHA-256/224
Added frandom support
Improves network speed
Optimization for the memcpy, memmove, copy_page
Cleaned kernel from unused stuff
Other small fixes and improves
V3.0
Aroma Installer (thank varun.chitre15)
Switched to AnyKernel
Compability with - CM12.x CM11(need test) - AOSP,CM based ROM's
Compilled with gpu and neon optimized flags
Added zSwap from Linux 3.11
Added frontswap
Added vnswap
Update to latest f2fs
Added LZ4 decompressor module
Set CONFIG_HZ to 300(improve UI responsiveness, especially
when there is significant background CPU work)
Slightly speed up EXT4
Switch to LZ4 kernel compression for faster boot
(better than XZ)
Added Alucard hotplug
Added msm_hotplug
Dynamic Fsync 2.0
Set readahead to 512
Fix a possible memory leak
Other small fixes and improves
V2
OC to 1.5GHz
UC to 286MHz
Fixed second core over-riding issue with OC thank @faux123
Decreased voltage for all frequency by @varun.chitre15
Based on latest sources
New hotplug(Bricked and Intelli)
New governor (intellidemand2 | intelliactive | smartmax | wheatley | bioshock | lionheart)
New I/O Schedulers (fifo | vr | zen | sioplus)
Add new TCP/IP
Fast charge by @faux123
Intelli-thermal by @varun.chitre15
Add .zip installation
and other small fixes
About second core, stock mpdecision causes this bug.You need to disable his and using other hotplug(bricked or intelli)
V1
Initial Release. More features to come soon
Old version
DOWNLOAD:
V3
V2
V1
Good work :good:
rostifaner said:
RKernel
Code:
[/QUOTE]
Awesome work bro,co thank ;):o
Click to expand...
Click to collapse
We need zram because of just 1Gb available on this phone. Thanks
cojocar.andrei said:
We need zram because of just 1Gb available on this phone. Thanks
Click to expand...
Click to collapse
I'm testing Zram, this slows down our memory
Cm12.1 support ?
OmenHTX said:
Cm12.1 support ?
Click to expand...
Click to collapse
No,only for the cm13.0
rostifaner said:
I'm testing Zram, this slows down our memory
Click to expand...
Click to collapse
I was afraid of this. 1Gb is really not enough anymore...
Does this work on custom roms based on cm13?
cojocar.andrei said:
I was afraid of this. 1Gb is really not enough anymore...
Click to expand...
Click to collapse
1gb ram is not enough. I cant use chrome, set live wallpaper and chat messenger at the same time. It is so laggy
newguyknowsnothing said:
1gb ram is not enough. I cant use chrome, set live wallpaper and chat messenger at the same time. It is so laggy
Click to expand...
Click to collapse
You don't have to use live wallpaper?
1GB is really not enough nowadays but then u don't have to use some extra stuff like live wallpaper.
any reason for not having 1.5ghz (preferred, not much gain if 1.7ghz on geekbench3) or 1.7ghz (well, the more the merrier ) ?
shouldn't bring much heat unless you use both cores at such OC speed.
I need it for PPSSPP and Drastic which only uses 1 core.
EDIT : nevermind, just noticed you added 1.5ghz on your github.
Xperia_L said:
You don't have to use live wallpaper?
1GB is really not enough nowadays but then u don't have to use some extra stuff like live wallpaper.
Click to expand...
Click to collapse
Yeah I know ... Just saying. i haven't used live wallpaper for such a long time. 1 gb is not enough for apps these days.
lybxlpsv said:
EDIT : nevermind, just noticed you added 1.5ghz on your github.
Click to expand...
Click to collapse
yaa,release rollout soon
Great Job! :good:
Waiting AOSP MM support
★Deathstroke★ said:
Great Job! :good:
Waiting AOSP MM support
Click to expand...
Click to collapse
Welcome my friend!
Do i need to flash this even if the rom rr-6.0.1 has its built-in kernel,/audiutor? Whats the difference of this kernel to stock kernel of RR.
Thanks in advance.
Update
RKernel-2.0+
Time for the new future
OC to 1.5GHz
UC to 286MHz
Fixed second core over-riding issue with OC thank @faux123
Decreased voltage for all frequency by @varun.chitre15
Based on latest sources
New hotplug(Bricked and Intelli)
New governor (intellidemand2 | intelliactive | smartmax | wheatley | bioshock | lionheart)
New I/O Schedulers (fifo | vr | zen | sioplus)
Add new TCP/IP
Fast charge by @faux123
Intelli-thermal by @varun.chitre15
Add .zip installation
and other small fixes
About second core, stock mpdecision causes this bug.You need to disable his and using other hotplug(bricked or intelli)
Download
Matsuura Kernel | Stability for Performance
For Xperia E3
Based on Lineage OS 14.1 source
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Matsuura Kernel is based on Lineage OS source (renaissance), and included many improvement, features and optimization on processor for Xperia E3 that use Lineage OS Nougat as base ROM.
Matsuura Kernel offer kernel stability, smoothness process on cpu and This kernel is include several feature to increase performance, This kernel need kernel configuration app to control this kernel, so try to find kernel configuration app after flash this kernel.
Recommended Kernel Configuration App:
- Kernel Adiutor [Recommended, simple and easy to use]
- Device Control
This kernel feature is :
- Linux Kernel v3.4.113
- Added CPU overclock up to 1,6Ghz
- Added CPU underclock to 96Mhz (300Mhz as minimum idle freq)
- Added GPU overclock and underclock to 100Mhz as lower and 550Mhz as higher frequency
- Compatibility with AOSP,CM And LineageOS based ROM [Android 7.0+]
- Added custom CPU Governor : Alucard,Intelliactive,IntelliMM,PegasusQ,Smartmax,Lionheart, & Intellidemand
- Added custom I/O Sched Governor : zen,sio,sioplus,tripndroid,fifo,fiops,maple,bfq and vr
- Added custom TCP Modules : Advanced,Bic,Westwood,Hybla,Vegas,Veno,Yeah,Ascarex and more
- Implement Power Efficient Workqueues
- Added Interface of Gentle Fair Sleepers,CPU Boost,Android Logger,Wakelock Toggles and Arch Power (Option Disable by Default)
- Added Frandom Support
- Added Dynamic Fsync 1.5
- Entropy Tweaks
- NEON VFPV4 Optimized (hard)
- Added Intelli Plug v4.0 (Disabled on new update)
- Added Intelli Thermal v1.0
- Added Headset High Perfomance Mode (HPF)
- Added Simple GPU Algorithm
- Added Faux Sound Control v3.6
- Added Powersuspend Driver v1.6
- Added MSM Hotplug
- Added State Notifier Driver
- Compiled using GCC 5.4.1 Hyper Toolchains
- Added Compatibility with AnyKernel v1 Script
- Added EXFAT File System Support (Need Test)
- Updated F2FS to latest revision branch (f2fs-stable.git) [F2FS Branch]
How to install :
>> For v4 and v4.1
1. Download Matsuura Kernel and install it from recovery mode, use TWRP recovery then reboot to system
2. Download Root Explorer or whatever it is
3. Delete /system/etc/init.d/99matsura then reboot
4. install kernel adiutor from Playstore Link for kernel configuration (i don't have myself app to control kernel)
5. Final step, let's configure kernel like what you want it :victory: and enjoy my first custom kernel
>> For v3
1. Download Matsuura Kernel and install it from recovery mode, use TWRP recovery then reboot to system
2. install kernel adiutor from Playstore Link for kernel configuration (i don't have myself app to control kernel)
3. Final step, let's configure kernel like what you want it :victory: and enjoy my first custom kernel
For download, look at download tab on top of this thread
Thanks to :
@rmnhg
@infus38
@jpzex
@aryawpratama
Have Try :highfive: !
XDA:DevDB Information
Matsuura Kernel for Xperia E3, Kernel for the Sony Xperia E3
Contributors
Nicklas Van Dam, rmnhg, aryawpratama
Source Code: https://github.com/Nicklas373/renaissance
Kernel Special Features: Optimized for flamingo, Build for peformance, and Overclock
Version Information
Status: Stable
Current Stable Version: 4.1
Stable Release Date: 2018-04-17
Created 2018-02-19
Last Updated 2018-05-06
Changelog
Changelog :
- 4.1 (20180417):
- Removed CPU Freq Upstream
- Removed CPU Gov Chill & Relaxed
- Removed Interactive optimization
- Revert Change of dynamic fsync to 1.5 cause stability issue
- Improved CPU algorithm after clean up
- Improved Kernel Performance & Stability Runtime
- Reduced Some Wakelock Code on kernel
- Change some init.d optimizations
- Fourth Build (20180415) :
- Misc change with WLAN
- Update powersuspend to v1.6
- Updated new power manager API
- Optimized kernel sched balance feature
- Added new filesystem dynamic read-ahead (thanks to @infus38)
- Added interface toggle of printk logger
- Added MSM Hotplug and disable intelli plug
- Misc kernel optimizations
- Fix some memory leak issue on selinux and other
- Added new wakelock toggle (bluedroid and bluesleep)
- Updated kernel power efficient workqueue algorithm
- Added initial init.d support
- v3.1 (20180319):
- CPU misc optimization
- Added dynamic management of dirty page writeback
- Disable some tracing and debugging
- Misc optimization for intelli thermal
- Third Build (20180305)[F2FS Version][Last Support that use F2FS]:
- Re-port F2FS to current revision branch from f2fs-stable.git
- Re-configure F2FS configs
- Update FAUX Sound Control to v3.6
- Added Maple I/O Sched with state notifier
- Added TCP Ascarex congestions
- Removed stock mpdecision on kernel to fix hotplug problem
- Configure some CPU Governor freq & Update Alucard to v1.1
- Removed SDCARDFS Drivers (Not work)
- Added Tripndroid I/O Sched
- Setting up Maple as default I/O Sched, TCP Westwood as default and Intelli Plug enable as default
- Second Build (20180225):
- Misc Optimizations on CPU Table
- Fixed CPU OC and OC up to 1.6Ghz
- Fixed CPU UC and UC to 96Mhz with 300Mhz as minimum idle frequency
- Fixed GPU OC and UC to 550Mhz as higher and 100Mhz as lower frequency
- Re-build new dt.img (to refresh new CPU/GPU Freq)
- Added sioplus I/O Sched
- Added Lionheart CPU Governor
- Removed MSM Limiter & Maple I/O Sched
- Added SDCARDFS Drivers (Need Test)
- Removed F2FS Support (NOTE: Other build still support, but won't for long term support)
- First Build [BETA](20180219):
- INITIAL RELEASE
Kernel Adiutor Configuration
CPU Manager :
CPU Max Frequency : 1190Mhz (For Normal Usage), 1.406Mhz (For Multitasking Usage) & 1.596Mhz (For Hard/Gaming Usage)
CPU Min Frequency : 384Mhz / 787Mhz (For Normal / Idle) & 96Mhz / 192Mhz (For Battery Saving)
CPU Governor: Alucard or Interactive (For Normal Usage), Alucard or IntelliMM (For Multitasking Usage) & Lionheart or Intelliactive (For Hard/Gaming Usage)
CPU Boost: 20ms
Sync Threshold: 787Mhz
Input Interval: 40ms
Input Boost Frequency Core 1 - 4: 998Mhz
(Beside that leave it as stock)
Thermal Manager:
Intelli Thermal : Enable
Core Control : Enable
Frequency Throttle Temperature : 60c
CPU Throttle Temperature : 70c
Thermal Limit Low = 2
Thermal Limit High = 11
(Beside that leave it as stock)
GPU Manager
GPU Max Freq : 450Mhz (For daily usage), 550Mhz (For hard gaming)
GPU Governor : msm-adreno-tz
Simple GPU Algorithm : enable
I/O Scheduler =
Internal Storage: maple (default), bfq (For multitasking)
External Storage: maple (default), bfq (For multitasking)
NOTE : It should set as maple for internal, but i don't know about external, but you can use another if you want to get some experience with it
Misc =
Software CRC Check = Disable
Dynamic Fsync = Disable
Arch Power = Disable (Not really recommended)
Gentle Fair Sleepers = Disable
Power Suspend Mode = Hybrid
TCP Congestions = Depends on your need
Wakelock = Disable all toggles to disable wakelock that active on idle
Option already update during new kernel feature is include
For explanation (cpu hotplug, and i/o sched) check on this thread
CPU Governor : Link- 1 Link-2
I/O Sched : Link
CPU Hotplug :Link - 1 Link - 2
Special Thanks to @gsstudios for guide :laugh:
FAQ Thread
FAQ Thread:
1. Can i install this kernel on type D22XX?
: Yes, you can install this kernel on all variant of flamingo (Xperia E3)
2. Can i install this on other version of lineage or other ROM from the other ROM?
: Yes, you can directly to install it without any worry because this ROM already integrated with anykernel
3. I've some problem with my device, like ....?
: You can report it with give proper dmesg or kmsg log here, go to kernel adiutor and go to settings -> search about dmesg or kmsg section and upload that log here.
4. Why stock mpdecision is gone after flash this kernel?
: Yes, i'm disable it but not remove it. To avoid overlap issue when using mpdecision but intelli plug already available as change for mpdecision and enable by default
5. Can i restore mpdecision?
: yes, try to rename it with root explorer or other root manager and go to /system/vendor/bin and rename mpdecision.bak to mpdecision and change permission to rwx-xr-xr (0755) and reboot it. It should restore your mpdecision
6. About F2FS Support
: Last build of kernel that still support for F2FS is on v3, build is higher than that is not supported for F2FS again during some unsolved issue for adoptable storage user.
So Nice , I'm so sad to only dev for e3 and not own one
thanks to you for push that on xda , people will love it
Great Kernel. :victory:
From another great dev
Thank You
Will flash it Asap.
Ali Haide 001 said:
Great Kernel. :victory:
From another great dev
Thank You
Will flash it Asap.
Click to expand...
Click to collapse
Thanks , Have Try !
New update is release !
New update is release for matsuura kernel with major change on kernel :highfive:
in this update, OC/UC is really work because i already update dt.img and improve anykernel script.
Kernel stability already increase with following adding much feature on it and adding kernel wakelock toggles
I'm still include much change and improvement on kernel, for further change look on changelog page.
Download links in download tabs, have try
New kernel adiutor configurations is already updated, please see it to get better performance when using this kernel
NOTE: Mpdecision is removed for this build, so when you want to flash another kernel beside this try to do this before
try to rename it with root explorer or other root manager and go to /system/vendor/bin and rename mpdecision.bak to mpdecision and change permission to rwx-xr-xr (0755) and reboot it. It should restore your mpdecision
Thank you for update
Developer is great and supporting:angel:
I have been using this kernel from some time and i can say that it's awesome
I recommend everyone to try this Kernel:highfive:
can't download because it's under maintenance https://forum.xda-developers.com/devdb/project/dl/?id=28779
aryawpratama said:
can't download because it's under maintenance https://forum.xda-developers.com/devdb/project/dl/?id=28779
Click to expand...
Click to collapse
Link download is already fixed, try to access on pc if you've problem with it. When server is maintenance just wait for a few hours and it will available again.
Or maybe i'll make a mirror on androidfilehost later
Sent from my Sony Xperia M using XDA Labs
Nicklas Van Dam said:
Link download is already fixed, try to access on pc if you've problem with it. When server is maintenance just wait for a few hours and it will available again.
Or maybe i'll make a mirror on androidfilehost later
Sent from my Sony Xperia M using XDA Labs
Click to expand...
Click to collapse
Thank you!
aryawpratama said:
Thank you!
Click to expand...
Click to collapse
you're welcome .
If have any problem with it just ask it or contact me at PM
New update is release !
New update is release or matsuura kernel, at this release i add much feature and some bunch of fix inside the kernel
Kernel stability already increase with following adding much feature on it and adding additional kernel wakelock toggles
I'm still include much change and improvement on kernel, for further change look on changelog page.
kernel already used init.d script, so kernel will get auto configured after boot is completed
Download links in download tabs, have try
New kernel adiutor configurations is already updated, please see it to get better performance when using this kernel
NOTE: MSM Hoptlug is used to change intelli plug, let's see if this can manage better than intelli plug
and F2FS Build isn't supported again since fourth build, if anyone use adoptable with f2fs then stick with v3 for keep your device decrypted normally or PM me to request for f2fs build.
New update is release !
New build is release to fix some problem with copyright issue with the owner of code..
What's removed :
- Upstream CPU Governor
- Chill & Relaxed Governor
- Interactive Patch Update
- Downgrade Dynamic Fsync to 1.5 from 2.0
But, i already fix some issue and increase kernel stability and performance after that remove. So kernel runtime and performance isn't drop down cause that remove.
Have try
New build is on download tab and i already update changelog
The mobile struck on the lineage booting page after installing this kernel.
I am using LOS v3 with mastuura kernel v4 . everything is fine . one day i drained my full battery and kept it for charging the phone is not charging up and not turning on .. can anyone help ?
arulsherlin said:
I am using LOS v3 with mastuura kernel v4 . everything is fine . one day i drained my full battery and kept it for charging the phone is not charging up and not turning on .. can anyone help ?
Click to expand...
Click to collapse
Same with me
Mother board is fused
Go to Sony repair ward . they'll fix for 2000₹
@Nicklas Van Dam Tank you
How to download this File Kernel? I can't look the downloads link