I recently flashed an oppo R9m using the SP flash tool. I formatted all the partitions and when I flashed the firmware it gave this error "STATUS_SEC_INSUFFICIENT BUFFER (0xC002004B), HINT: verified boot is enabled, please download signed image( boot-verified.img) or disable verified boot.
Anyone can help in this regard?
Related
i have found full restore package A820_S150_130925 full, using mtk6589 sp flash tool, but when i try firmware upgrade or download i get error "the secure version of secure MAUI is older than in the handset. how can i fix this problem? please note that i accidently wiped the bootloader / preloader when formatting the whole flash and the only way to fix the phone is to use a mtk tool to do a firmware upgrade. how do i get the restore package that has the latest maui or change this package so it has the latest or equal maui?
i have attached a screen shot of error. thanks for help in advance.
Hello,
I was trying to flash new firmware into my Eurostar ET9183G-HM14. I downloaded the firmware - MT6572_alps_ET9183G-HM14_gq_709_common_huima_hm14_4.4.2_sw01_hm_ET9183G-HM14-20150122. The first time it showed PMT changed for the rom it must be downloaded. Then I did a format except for the bootloader and then I flashed the ROM and it completed successfully. I tried to boot the device but it wouldn't boot. I went to reflash it again but it returns an error - BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0). I don't know what to do. Can anyone please help ? It's really urgent.
U might be using the wrong Custom Rom or recovery.
Hey guys,
I yesterday made a problem to my Honor View 10. I flashed a wrong Splash IMG to the boot partition. Now the device is not booting into the OS. It's just looping in the splash logo. In twrp it showed vendor can't be mounted. But after flashing TWRP-3.1.1-0 I was able to wipe vendor so that it could be mounted. But again a problem was that after flashing Lineage OS, the device is not booting. Tried to flash the OTA Package using Erecovery. But it's not working. Tried to connect to WiFi and install update using E Recovery but as usual it also failed. I flashed the vendor.img which was found in the Honor Open Source Thread. My device is indian version BKL-L09C675. I flashed the vendor for BKL-L04. Can anyone help me to give a solution
ramdisk and recovery
Do you still have BL access?
If you do you can try flashing these files. (XDA throws me a 403 entity too large that's why they're in GDrive.)
Do you by any means know how to boot into BL from shutdown?
https://forum.xda-developers.com/honor-view-10/help/help-shutdown-boot-bl-t3817324
recovery_ramdisk.img
BKL-L09_ramdisk.img
https://drive.google.com/drive/folders/1JN5u_VKAkM_0wTKpxlNZub8m6iVgkmDj?usp=sharing
I recently flashed a oppo R9m using SP flash tool. I formatted all the partitions and when I flashed the firmware it gave this error "STATUS_SEC_INSUFFICIENT BUFFER (0xC002004B), HINT: verified boot is enabled, please download signed image( boot-verified.img) or disable verified boot.
Anyone can help in this regard?
Note: I have no backups prior to the flashing.
Hello, I have an X27 PLUS chinese phone with MT6572 processor and kitkat 442. I rooted him with Kingroot. Then I wanted to flash twrp. Аnd here I made a mistake. Since I didn't have a sd card, I decided to flash the TWRP directly on the phone with "Easy Magic TWRP" 2.8.1.0.
After the flash, it showed me that the installation was completed successfully. But the phone is already in boot loop. The only thing that works is Fast Boot. But I can't flash the stock image recovery file, it tells me that the flash sector can't be flashed (or doesn't support flash). I have a backup made with the help of Droid Tool and SP Flash Tool.The problem is that the flash tool cannot connect to the phone.
I have all the drivers installed, and before flashing the TWRP, the phone was recognized by the software.
Is there any way to solve this problem?
Ps:I am writing in the forum for the first time and I apologize if I am not in the right topic.
cybrax said:
Hello, I have an X27 PLUS chinese phone with MT6572 processor and kitkat 442. I rooted him with Kingroot. Then I wanted to flash twrp. Аnd here I made a mistake. Since I didn't have a sd card, I decided to flash the TWRP directly on the phone with "Easy Magic TWRP" 2.8.1.0.
After the flash, it showed me that the installation was completed successfully. But the phone is already in boot loop. The only thing that works is Fast Boot. But I can't flash the stock image recovery file, it tells me that the flash sector can't be flashed (or doesn't support flash). I have a backup made with the help of Droid Tool and SP Flash Tool.The problem is that the flash tool cannot connect to the phone.
I have all the drivers installed, and before flashing the TWRP, the phone was recognized by the software.
Is there any way to solve this problem?
Ps:I am writing in the forum for the first time and I apologize if I am not in the right topic.
Click to expand...
Click to collapse
Hey I got one of them x27 plus wish phone....mtk6572 4.4.2 kitkat .....for true info on device install "device info hw" green icon and activity launcher .....check out the info it gives compared to info from ph settings menu.....but my question did you find way to root of flash a generic android rom?
I used kingroot with laptop.