Database Info

[Q] MT7-TL10 Can not boot.

Hello, after updating my MT7 - TL10 unbootable .
At startup the screen remains black , the LED flashes orange one and a green three times ( three cycles). With a hard reset is the same except that the screen is white.
Someone already you had this problem ? I begin , thank you kindly help me.

Merlin-69 said:
Hello, after updating my MT7 - TL10 unbootable .
At startup the screen remains black , the LED flashes orange one and a green three times ( three cycles). With a hard reset is the same except that the screen is white.
Someone already you had this problem ? I begin , thank you kindly help me.
Click to expand...
Click to collapse
Which kind of update method did you used? 3bts? Or FORCED UPDATE?
Have you tried to go into STOCK recovery (volume up+power button)? Is it working?
Have you downloaded and put in the DLOAD folder the CORRECT firmware for Ur phone?
Please double check and, in case, better to re-download it (be sure it is the correct one for TL-10).
Then try 3btns again.
If procedure works, it' s always a good thing to gointo stock recovery AFTER UPDATE proceure, and apply a full WIPE CACHE AND WIPE DATA/FACTORY RESET.

Hello Tuddu .
I made a forced update .
The method of the three buttons does not work = more white screen LED flashing amber and green three times ( three cycles).
When I connect it to the charger , it is happening. I fear the worst .

Merlin-69 said:
Hello Tuddu .
I made a forced update .
The method of the three buttons does not work = more white screen LED flashing amber and green three times ( three cycles).
When I connect it to the charger , it is happening. I fear the worst .
Click to expand...
Click to collapse
Have you the stock recovery installed?
Does the recovery works (can you enter into recovery properly?). If not, you should try to re flash the stock recovery, of course if the HAM7 is recognised by Windows.
Differently, i fear, it could be an hardware problem...
Sent from my S5+ using XDA Free mobile app

The situation evolved !
I come now to start the phone mode " Fastboot & Rescuemode ." But then I do not know what to do.

Here you could if the bootloader is open, the respective imgs (boot, recovery cust, and system) or flash when closed, flashing with a Huawei HiSuite FW.

can I use fastboot to install : boot.img , recovery.img , system.img .
I extracted the .img from the firmware.

I would still flash the cust.img. Then fastboot reboot and hope it starts. The question is, what your battery still says.
If it does not start, then it is probably a case for the service.

I Flasher cust.img , boot.img , recovery.img , system.img . But it does not start. What can I do more for the mode " Fastboot and rescuemode " ?

You could still try the Huawei HiSuite. Furthermore you can flash a Stock Rom. Much more remains not.

Then I flash a ROMSTOCK using cmd fastboot

Only works with the HiSuite.

tuddu said:
Which kind of update method did you used? 3bts? Or FORCED UPDATE?
Have you tried to go into STOCK recovery (volume up+power button)? Is it working?
Have you downloaded and put in the DLOAD folder the CORRECT firmware for Ur phone?
Please double check and, in case, better to re-download it (be sure it is the correct one for TL-10).
Then try 3btns again.
If procedure works, it' s always a good thing to gointo stock recovery AFTER UPDATE proceure, and apply a full WIPE CACHE AND WIPE DATA/FACTORY RESET.
Click to expand...
Click to collapse
I also have the same problem. I wonder if you could help me out also. I've been having these problem for 3 weeks now. Here's the story. I was going to sell the phone to my friend, so I was unrooting and installing stock firmware on it. I downloaded the stock firmware from Huawei website. Flash the stock recovery extracted from the firmware update.app. Put the firmware in dload on a newly bought 8GB SanDisk, and forced update. The update failed saying that the update.app could not be found even tho it is under 'root of the sdcard'/dload/upload.app. So I flashed CWM and flash the repacked update.app using the Huawei Update Extractor. It was fine until I redo the forced update process. EMUI showed up half way and failed with the same reason, it could not find the update.app. I restart the phone and it is bricked.
Condition right now. BL is unlocked.
- Turn on normally: It flashes [Red Green Green Green] x 3 before turning off.
- Turn on with Vol+ + Power to get to the recovery: Same result as turning on normally.
- Turn on using 3BTNs: It shows "HUAWEI Ascend" logo and stays there for 48 hours. Then I figured it wasn't going to do anything.
- Turn on into bootloader with vol- + power works fine. I can get to the bootloader.
What I've done so far. Most are suggestion on XDA forum, somes are from other sources.
- fastboot flash boot, recovery, cust, userdata, and system of 3 different versions of firmware (MT7-TL10 for Global, Chinese, and MT7-TL09 Global). All firmwares are from Huawei website. None of them work.
- fastboot flash CWM recovery. Didn't work. I could not get to the recovery mode.
- fastboot flash many boot.img from custom roms hoping it would at least take me to the recovery. Didn't work.
- bought another micro sd card, which didn't matter since both cards work fine on other devices.
- Try using older version of Hi-Suite that has the restore function. This is the weird part. Hi-Suite would starts itself as soon as it detects the phone in bootloader mode, but it says "Phone is not connected." Unfortunately, this fails also.
I wish there were a way to force boot the phone into the recovery mode other than the button combos. What do you think I could do? I'll try anything. Thanks.

i have same problem too . anyone get working way ??????

Factory reset, now stuck at TWRP, can't access fastboot and rescue

Ive been running KangVIP with no problems, however I got some adware which refused to go away, so I attempted to factory reset via the phones menu. It then ended up stuck at the TWRP screen. This has happened before so next I tried to restore a previous backup...not successful. I can't access fastboot and rescue to flash the official recovery.
Anyone got any help? Is there a guide to flashing the stock rom or have I borked my phone?

You can not shut down the device and connect it via USB to a PC and boot while holding volume down button into fastboot mode?
Well then you have ruined your phone.

I'm OP, was unable to get into my usual account last night. I'm not sure how, but holding volume up, down and power seemed to kick start it back to life and I'm back running KangVIP. I don't think I'll be resetting it again for a very long time.

Hirs_E_Fruit said:
You can not shut down the device and connect it via USB to a PC and boot while holding volume down button into fastboot mode?
Well then you have ruined your phone.
Click to expand...
Click to collapse
Hi I'm in the a similar boat with my Huawei P8 Max DAV-703L (brought in China but live/use in the US) its only boot looping into TWRPv2.8.7.0. I can put it into Fastboot & Rescue Unlocked Bootloader but don't know what to do since i tried flashing my Android 6 again and no repsponse just TWRP boot loop. Now some how i wiped my ext-sd card as well (really pissed with myself about) Can you help pls on how to get my Huawei P8 Max DAV-703L stock rom back working again?

It happend to me - this is what I did to fix it.
ohiromep8max said:
Ive been running KangVIP with no problems, however I got some adware which refused to go away, so I attempted to factory reset via the phones menu. It then ended up stuck at the TWRP screen. This has happened before so next I tried to restore a previous backup...not successful. I can't access fastboot and rescue to flash the official recovery.
Anyone got any help? Is there a guide to flashing the stock rom or have I borked my phone?
Click to expand...
Click to collapse
I'm not sure whether it was luck or not, but all I did was to go into TWRP and then chose the Mount option, unmounted everything, then went to Reboot and chose Bootloader - that got me back to fastboot where I was able to flash the stock recovery, do a factory reset and get my phone back.

i have similar problem one friend use kingroot change to tpwr. now i try restore frimware but fastboot on screen say unloked on red text but commands not alowed.
and android os not have R/W /system only can r/W on tpwr i try use file explorer remove king root but no boot
who to clean rom? for update.

needrom.com

MATE 7 not booting

Hi, need some urgent help here.
I was trying to install a custom rom, so I unlocked first the bootloader, then flashed twrp 3.0.2 for Android 5.1 and with it I flashed KangVip rom (porto from honor 6).
Problem was it didn't boot, just black screen.
So I supposed the problem was with the rom so I flashed via fastboot the aosp 6, obviously with same results.
I tried lot of stuff (twrp 2.8.x.x, reinstall stock firmware, restore twrp backup of stock full firmware and so on - I did almost everything I could do) and now I'm with a Huge problem: no huawei logo at start, just a white screen and nothing happen. I have twrp 3.0.2 for 5.1 installed right now but I can't install stock recovery.
Please help me, what do I gotta do?
[emoji30]

the ported rom is based on Android 6.0 you have Android 5.1 youk should flash 5.1 based rom..
it's good to flash stock and update official to b560 or b571 depending on which region to have then flash twrp recovery and then flash desire rom..

fazi2015 said:
the ported rom is based on Android 6.0 you have Android 5.1 youk should flash 5.1 based rom..
it's good to flash stock and update official to b560 or b571 depending on which region to have then flash twrp recovery and then flash desire rom..
Click to expand...
Click to collapse
Thx for this.
But I have a problem, I can't install stock recovery and if I try to flash the .img files extracted from update.app nothing happens.
Also, I still have that problem with huawei logo disappeared and a blank white screen instead.
Sent from my HUAWEI GRA-L09 using Tapatalk

boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....

fazi2015 said:
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
Click to expand...
Click to collapse
Solved, thanks!
Sent from my HUAWEI GRA-L09 using Tapatalk

fazi2015 said:
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
Click to expand...
Click to collapse
Hope you can help me out here...I had just gotten my HAM7 for a couple of days. Was on 4.4.2 B120, was able to get it up to B326. Just yesterday I attempted to flash up to B331 and it succeeded according to the "local update" option. Then it went on boot loop. I tried doing the force 3-button option and that worked to the point of saying it succeeded and will reboot. Now I'm stuck on Ascend Mate logo. I can no longer get into factory option mode (V+Power), only fastboot mode. Also, I can't do force update no more so I can't try any other "update.app" unless I'm missing something here.
Any help in getting this unit at least back to working condition will be a BIG help. I just received this two days ago.
Thx!!!!

jfer671 said:
Hope you can help me out here...I had just gotten my HAM7 for a couple of days. Was on 4.4.2 B120, was able to get it up to B326. Just yesterday I attempted to flash up to B331 and it succeeded according to the "local update" option. Then it went on boot loop. I tried doing the force 3-button option and that worked to the point of saying it succeeded and will reboot. Now I'm stuck on Ascend Mate logo. I can no longer get into factory option mode (V+Power), only fastboot mode. Also, I can't do force update no more so I can't try any other "update.app" unless I'm missing something here.
Any help in getting this unit at least back to working condition will be a BIG help. I just received this two days ago.
Thx!!!!
Click to expand...
Click to collapse
are you have unlock bootloader or not..

fazi2015 said:
are you have unlock bootloader or not..
Click to expand...
Click to collapse
Yes, bootloader is unlocked. FYI, I can't do Vol+ Power or 3-button force. I have no idea what went wrong after the B331 update.app flash. It said successful then boot loop after. I have looked all over the forums and tried everything from flashing C900B300 rollback to try and get 4.4.2 that I started out with, but I really don't know which firmware to start with. The last update.app files I was using was the European variants. Phone was originally locked to Ecuador MoviStar network at B120SP04, then I flashed up to B324 5.1.1. Rooted and then wanted to upgrade to B331 so I unrooted and flashed. Now I'm stuck.

jfer671 said:
Yes, bootloader is unlocked. FYI, I can't do Vol+ Power or 3-button force. I have no idea what went wrong after the B331 update.app flash. It said successful then boot loop after. I have looked all over the forums and tried everything from flashing C900B300 rollback to try and get 4.4.2 that I started out with, but I really don't know which firmware to start with. The last update.app files I was using was the European variants. Phone was originally locked to Ecuador MoviStar network at B120SP04, then I flashed up to B324 5.1.1. Rooted and then wanted to upgrade to B331 so I unrooted and flashed. Now I'm stuck.
Click to expand...
Click to collapse
now you should flash twrp recovery in fastboot mode and then flash a custom rom like kangvip I'll send you link soon...

fazi2015 said:
now you should flash twrp recovery in fastboot mode and then flash a custom rom like kangvip I'll send you link soon...
Click to expand...
Click to collapse
Thank you very much....hope that will solve the boot issue and bring this unit back to life

Alright, so I've given up complete hope that I can get my unit back up and running again. I've tried so many ways already with no success (fastboot/adb, force upgrade, etc.,), and even tried to copy my second HAM7 images (via sdk tools) and to no avail.
The thing I'm trying to understand is where exactly do I start with trying to revive? When I first got this device from eBay, it was apparently still on "MoviStar" Telefonica-Spain network so my network bars showed "R" for roaming. Somehow, I was able to flash it from being on V100R001C00B120SP04a and upgrade to B127>B145>B324 which made me able to use my own service normally. It worked fine and I was even able to root it. Decided to do a last upgrade to B331 and while the local update option showed it as successfully installed, it went into boot loop ever since. Hence, I used European firmwares for most of the flashing. My second mate was on B145 and I was able to get that to B331, which is running fine right now.
ATM, I am ONLY able to do Volume-/Power to get into fastboot.
Doesn't work:
- V+/Power (stock recovery)
- V-+/Power (3-button force)
What works:
- V-/Power with USB for fastboot
*Bootloader is unlocked, but I do believe that after flashing the last firmware of B331, I may have done a factory wipe, which probably reset the USB debugging option as well. So, I'm sure I'm stuck with a device that just might be flashed on the wrong firmware and is factory reset which prevents me from flashing a custom rom or even the stock rom???
Any last advice I would be so thankful for...still waiting on the link for KangVip rom from (fazi2015)
All the best...

jfer671 said:
Alright, so I've given up complete hope that I can get my unit back up and running again. I've tried so many ways already with no success (fastboot/adb, force upgrade, etc.,), and even tried to copy my second HAM7 images (via sdk tools) and to no avail.
The thing I'm trying to understand is where exactly do I start with trying to revive? When I first got this device from eBay, it was apparently still on "MoviStar" Telefonica-Spain network so my network bars showed "R" for roaming. Somehow, I was able to flash it from being on V100R001C00B120SP04a and upgrade to B127>B145>B324 which made me able to use my own service normally. It worked fine and I was even able to root it. Decided to do a last upgrade to B331 and while the local update option showed it as successfully installed, it went into boot loop ever since. Hence, I used European firmwares for most of the flashing. My second mate was on B145 and I was able to get that to B331, which is running fine right now.
ATM, I am ONLY able to do Volume-/Power to get into fastboot.
Doesn't work:
- V+/Power (stock recovery)
- V-+/Power (3-button force)
What works:
- V-/Power with USB for fastboot
*Bootloader is unlocked, but I do believe that after flashing the last firmware of B331, I may have done a factory wipe, which probably reset the USB debugging option as well. So, I'm sure I'm stuck with a device that just might be flashed on the wrong firmware and is factory reset which prevents me from flashing a custom rom or even the stock rom???
Any last advice I would be so thankful for...still waiting on the link for KangVip rom from (fazi2015)
All the best...
Click to expand...
Click to collapse
https://mega.co.nz/#!3N4RzbJY!saB4NY...Ao5goVNiSXAjEc
I am not 100% sure about this rom but you can try it in fastboot you should flash twrp recovery first..

fazi2015 said:
https://mega.co.nz/#!3N4RzbJY!saB4NY...Ao5goVNiSXAjEc
I am not 100% sure about this rom but you can try it in fastboot you should flash twrp recovery first..
Click to expand...
Click to collapse
Unfortunately, it says the file is no longer available

jfer671 said:
Unfortunately, it says the file is no longer available
Click to expand...
Click to collapse
try this all information is here
https://forum.xda-developers.com/mate-7/orig-development/rom-kangvip-rom-mate7-emui3-1-b351-t3228597

fazi2015 said:
try this all information is here
https://forum.xda-developers.com/mate-7/orig-development/rom-kangvip-rom-mate7-emui3-1-b351-t3228597
Click to expand...
Click to collapse
Okay, so final result is I'm stuck on a frozen logo now. The twrp bat file again showed success in flashing and rebooted the device, but I'm hung on the "Huawei Ascend" logo. I have to pull the battery to shut it off, otherwise it stays on. So I'm now sure that it's a hard bricked device since I did the stupid thing of factory resetting which probably reset the usb debug...making it almost impossible to flash any firmware now.
Thanks for the help anyways...I really appreciate it. Gonna throw this up on eBay and see if anyone wants it for parts

jfer671 said:
Okay, so final result is I'm stuck on a frozen logo now. The twrp bat file again showed success in flashing and rebooted the device, but I'm hung on the "Huawei Ascend" logo. I have to pull the battery to shut it off, otherwise it stays on. So I'm now sure that it's a hard bricked device since I did the stupid thing of factory resetting which probably reset the usb debug...making it almost impossible to flash any firmware now.
Thanks for the help anyways...I really appreciate it. Gonna throw this up on eBay and see if anyone wants it for parts
Click to expand...
Click to collapse
I know it's annoying but last time I research more and guide you I was have same problem don't give up....

I send you recovery flash in fastboot no need of usb debugging usb debugging need for adb not for fastboot in fastboot flash recovery by your self download it
https://mega.co.nz/#!GRw0CZjQ!iZllDkA6yJeWk7iEA4vEVA94r2nM_YjAuiS8B9IZdm0
then extract the zip go to resource and hold shift and left click then select open command port here then power off device completely boot into fastboot (bootloader) connect the device to pc and in command port type
fastboot flash recovery twrp_2_7.img
after that type
fastboot reboot and hold the volume- button of device it'll boot into recovery if you success then reply..

I've noticed two things when flashing KK or LP. On KK, the phone does a constant boot loop with Huawei logo (on off on off), but on LP the Huawei logo hangs...it doesn't boot loop. Is this an indication or just a fault with both OS?

Honor 6x BLN-L22 Stuck on Boot Screen

i have unlocked my bootloader using Huawei_Multi-Tool_by_Team_MT_v7.1
since then my phone is stuck on boot screen {ur phone has been unlocked so cant be trusted................... Ur device is booting now}
i have tried POwer + Vol Up +Vol Down ........................ It just restart the device then same thing , stuck on boot screen.
Need help here

kdark said:
i have unlocked my bootloader using Huawei_Multi-Tool_by_Team_MT_v7.1
since then my phone is stuck on boot screen {ur phone has been unlocked so cant be trusted................... Ur device is booting now}
i have tried POwer + Vol Up +Vol Down ........................ It just restart the device then same thing , stuck on boot screen.
Need help here
Click to expand...
Click to collapse
Trying to flash custom ROM or just rooting on stock?

Press and hold volume up button it will take you to twrp you should have nandroid bsckup if u dont have then no worry try following flash twrp if you dont have then press power button it will show you same screen(device cant be trusted)from there choose reboot then reboot systen it will again show you same screen but immediately press power button it will boot. ifit dont try different combination sometimes it dont accept input(as i learnedfrom my experiance) if nothing works then i think wiping factory reset is only option and even reset dont work then reflash whole system using dload method

after battery got dischareged.
i charged it only 20%
phone turns on.
then i tried to install DLOAD method Update ---------------------------- it restarts and stuck again -------------------- then i let it discharged completely.
same thing happen if i try to install stock recovery or custom recovery
Also i cant boot into recovery

shashank1320 said:
Trying to flash custom ROM or just rooting on stock?
Click to expand...
Click to collapse
Rooting On stock
then remove some bloatware..............
Custom ROM may be
if i am stuck at boot screen.
nothing i can do

kdark said:
Rooting On stock
then remove some bloatware..............
Custom ROM may be
if i am stuck at boot screen.
nothing i can do
Click to expand...
Click to collapse
Boot into fastboot and check the status of your bootloader.
Or you can flash full stock via dload and then unlock bootloader, install twrpamd root.
I have given a guide in my signature for rooting on 6X.

shashank1320 said:
Boot into fastboot and check the status of your bootloader.
Or you can flash full stock via dload and then unlock bootloader, install twrpamd root.
I have given a guide in my signature for rooting on 6X.
Click to expand...
Click to collapse
I know the steps very well.
#######################
here is info
1. Bootloader is Unlocked.
2. NO info about Custom/stock recovery.
3. DLOAD APP method is not working.
I have Tried to unbrick phone with toolkit.
Now I can only boot into ERECOVERY (but it is getting error while trying to restore system)

kdark said:
I know the steps very well.
#######################
here is info
1. Bootloader is Unlocked.
2. NO info about Custom/stock recovery.
3. DLOAD APP method is not working.
I have Tried to unbrick phone with toolkit.
Now I can only boot into ERECOVERY (but it is getting error while trying to restore system)
Click to expand...
Click to collapse
How about the service center?

[help] Can't boot into system after updating to emui 8

Hi all,
I had an honor 6x BLN-L24 with an unlocked bootloader and custom rom installed, with emui 5. I decided to update to emui 8, using the following guide:
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Unfortunately, now my bootloader is locked and I can't boot into system. I don't have my oem unlock code anymore. Every time my phone boots, it boots into TWRP recovery. I have tried to install Elemental rom, but I still can't boot into system. I also can't find a way to boot into eRecovery.
Essentially, the problem is that I have TWRP installed as the recovery option but a locked bootloader and no OS. I don't what to do from here
Any help would be greatly appreciated.

You can't unlock the bootloader in an official manner anymore, the support about this has been deprecated last year. You should proceed with third party services, in example, DC Phoenix/FunkyHuawei/ecc. - about booting into eRecovery, if you're connected to a computer with an USB cable, you can enter eRecovery manually just by pressing Volume up + Power on when phone is off. You'll boot there.
To me the best thing to do in way to fix this is flashing full stock ROM through dload mode / HuRUpdater. Do you remember your build number for extended?

RedSkull23 said:
You can't unlock the bootloader in an official manner anymore, the support about this has been deprecated last year. You should proceed with third party services, in example, DC Phoenix/FunkyHuawei/ecc. - about booting into eRecovery, if you're connected to a computer with an USB cable, you can enter eRecovery manually just by pressing Volume up + Power on when phone is off. You'll boot there.
To me the best thing to do in way to fix this is flashing full stock ROM through dload mode / HuRUpdater. Do you remember your build number for extended?
Click to expand...
Click to collapse
Hi Redskull23,
Thanks for your help! I used HuRUpdater and flashed boot, recovery, and vendor onto my phone. Now, I'm able to boot into Huawei eRecovery. I'm going to attempt the dload method now.

androidhonor6x said:
Hi Redskull23,
Thanks for your help! I used HuRUpdater and flashed boot, recovery, and vendor onto my phone. Now, I'm able to boot into Huawei eRecovery. I'm going to attempt the dload method now.
Click to expand...
Click to collapse
How did you do that