Database Info

[Q] Can't boot into recovery

Trying to install CyanogenMod for my razr maxx HD. Recently used RSDlite to install 183.46.10 after OTA KK update kept failing. Then used towelroot to root and motopocalype to unlock bootloader. Fastboot screen shows bootloader is unlocked with status code: 3.
I then followed the instructions on the CyanogenMod site to flash CWM 6.0.4.4 recovery using fastboot, and all appeared to work fine.
However, when I try to reboot into recovery, nothing happens. I get hung up on the motorola dual core flashscreen for about a minute or two, then the screen goes black, then the phone reboots normally.
I tried flashing a different copy of CWM, tried TRWP, and tried several third party apps from Google Play store to boot directly into recovery using software reboot instead of hardware keys - all with the same results. I even tried flashing custom CWM recovery using ROM Manager and Rashr, same result.
Do I have a corrupt recovery partition? Any suggestions for how to fix?

You need to install a recovery for that phone specifically.
http://androidhosting.org/Devs/Dhacker29/
Use the recovery files found here.
Edit: on the site I posted, browse to the msm8690 folder. There you will find the recovery files.

to make this even easier here
TWRP http://forum.xda-developers.com/showthread.php?t=2776515
CWM http://forum.xda-developers.com/showthread.php?t=2747535
next time be sure your flashing for this phone and bootloader

billycar11 said:
to make this even easier here
TWRP http://forum.xda-developers.com/showthread.php?t=2776515
CWM http://forum.xda-developers.com/showthread.php?t=2747535
next time be sure your flashing for this phone and bootloader
Click to expand...
Click to collapse
Thanks, guys, total noob mistake. I knew the recovery needed to be specific for the phone, but didn't realize it varied depending on the bootloader. Will try again with the right recovery!

billycar11 said:
to make this even easier here
TWRP http://forum.xda-developers.com/showthread.php?t=2776515
CWM http://forum.xda-developers.com/showthread.php?t=2747535
next time be sure your flashing for this phone and bootloader
Click to expand...
Click to collapse
Those recovery aren't sticking for me. Does anyone have a suggestion to fix that issue.
Pushing the buttons doesn't work.
The only thing that is working is place the phone in fastboot mode and flash the recovery to my device three time and then I will go straight in recovery and there it is.
Sent from my SM-N900V using Tapatalk

TheGman125 said:
Those recovery aren't sticking for me. Does anyone have a suggestion to fix that issue.
Pushing the buttons doesn't work.
The only thing that is working is place the phone in fastboot mode and flash the recovery to my device three time and then I will go straight in recovery and there it is.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Your phone has been upgraded to Kit Kat and the bootloader unlocked, correct? The two recoveries linked to are for phones that already have already been upgraded to KK.
If so, power off your phone.
Then, hold down volume up and then press and hold power. After a few seconds, let go and the boot menu should come up.
Use Volume down to select "Recovery" and then hit "Volume Up". That should boot you into the custom recovery, depending on which one you flashed.
I prefer TWRP. CWM seemed buggy and it wouldn't always boot into it. A lot of times, I'd get a blank screen and would have to reflash it.
Another option is, when it's booted up, hooked up your phone to your pc and use adb to reboot it into recovery using "adb reboot recovery".

iBolski said:
Your phone has been upgraded to Kit Kat and the bootloader unlocked, correct? The two recoveries linked to are for phones that already have already been upgraded to KK.
If so, power off your phone.
Then, hold down volume up and then press and hold power. After a few seconds, let go and the boot menu should come up.
Use Volume down to select "Recovery" and then hit "Volume Up". That should boot you into the custom recovery, depending on which one you flashed.
I prefer TWRP. CWM seemed buggy and it wouldn't always boot into it. A lot of times, I'd get a blank screen and would have to reflash it.
Another option is, when it's booted up, hooked up your phone to your pc and use adb to reboot it into recovery using "adb reboot recovery".
Click to expand...
Click to collapse
Yep.. I had some issue with my devices. I tried the update well root and the devices didn't want to boot up anymore. So I had to RSD lite the devices back to health. So I do have the latest software for the devices. I guess. I am going to use Twrp since you say it boots fine from the boot menu.

TheGman125 said:
Yep.. I had some issue with my devices. I tried the update well root and the devices didn't want to boot up anymore. So I had to RSD lite the devices back to health. So I do have the latest software for the devices. I guess. I am going to use Twrp since you say it boots fine from the boot menu.
Click to expand...
Click to collapse
Is your bootloader unlocked? If not, that is your problem. You need to root, and then unlock the bootloader before you can flash TWRP and use CM.

iBolski said:
Is your bootloader unlocked? If not, that is your problem. You need to root, and then unlock the bootloader before you can flash TWRP and use CM.
Click to expand...
Click to collapse
Yes my bootloader is unlocked. Have code 3 on the devices.

try and unplug from USB when you reboot

HTC ONE E8 dead after Update

i got this phone. since i updated the device to android 5.0.2 there was a bug.my phone stop every 4 minutes and then restarts! i was waiting for android 6 and finally i received it in the past days.but there is a problem again!! while i was trying to setup the phone suddenly it stopped in 89% and then restart.but this time the phone did not work and there was only a red symbol at the center of screen. i tried to reset factory using volume down and power button but it does not help! any one knows what should i do now?!!any usable roms??? guide me please!

1- unlock bootloader in fastboot
2- flash twrp recovery in fastboot
3- get your model twrp clean backup
4- restore this backup in twrp recovery
gl bro

If u see red mark "!" on black screen then u have to hold long Power+Vol+.Then your phone is going to shut down.
Then Power+Vol- to get into bootloader and then start with fastboot and new recovery and backup.

mehrzad1363 said:
1- unlock bootloader in fastboot
2- flash twrp recovery in fastboot
3- get your model twrp clean backup
4- restore this backup in twrp recovery
gl bro
Click to expand...
Click to collapse
kheili mamnon!!
i will try this !!!

moto softbricked (bootloop, can't enter into TWRP recovery )

while i was trying to flash another rom on my device it turned off in the middle of the flashing and since then it is stuck in bootloop , i tried to enter in to the recovery (twrp) but it again gets into the bootloop after showing the TWRP logo, tried flashng the TWRP recovery but the phone is not being detected on PC .... kindly help me people

mmm, try upgrading recovery to the latest from TWRP official site. never used 2.8.5.
have used 2.8.7.0 during lollipop days, and it had no issues

koshikas said:
mmm, try upgrading recovery to the latest from TWRP official site. never used 2.8.5.
have used 2.8.7.0 during lollipop days, and it had no issues
Click to expand...
Click to collapse
thanks for the reply mate , now i am have increment in my problems , the other day i tried to flash another rom and during the flashing my phone went off and since then it is stuck in boot loop(not booting though) i can't enter in to TWRP recovery , (it displays the TWRP logo and again gets stuck in boot loop ) tried connecting to the PC in order to update the recovery but the command prompt isn't recognising the device though i installed ABD tools etc ... a bit too much to ask but can you suggest me what to do next ?

kartikey07 said:
thanks for the reply mate , now i am have increment in my problems , the other day i tried to flash another rom and during the flashing my phone went off and since then it is stuck in boot loop(not booting though) i can't enter in to TWRP recovery , (it displays the TWRP logo and again gets stuck in boot loop ) tried connecting to the PC in order to update the recovery but the command prompt isn't recognising the device though i installed ABD tools etc ... a bit too much to ask but can you suggest me what to do next ?
Click to expand...
Click to collapse
i would while booting the device keep pressing the power button to force shutdown the device. immediately after turning off, press and hold both power button and vol - keys for 10sec or more and release. this will get you into the bootloader screen. on that keep pressing vol - to select 'recovery' and press vol + to go into the recovery. good luck

koshikas said:
i would while booting the device keep pressing the power button to force shutdown the device. immediately after turning off, press and hold both power button and vol - keys for 10sec or more and release. this will get you into the bootloader screen. on that keep pressing vol - to select 'recovery' and press vol + to go into the recovery. good luck
Click to expand...
Click to collapse
yep tried this , on doing so it gets in TWRP recovery (the logo displays) but it again go into bootloop without actually booting into the recovery ... i am kind of stuck

kartikey07 said:
yep tried this , on doing so it gets in TWRP recovery (the logo displays) but it again go into bootloop without actually booting into the recovery ... i am kind of stuck
Click to expand...
Click to collapse
that leaves you only with one option. get into the bootloader screen, and flash the latest stock ROM using fastboot commands. then try flashing custom recovery, custom ROM from the beginning. i would skip flashing bootloader though.

koshikas said:
that leaves you only with one option. get into the bootloader screen, and flash the latest stock ROM using fastboot commands. then try flashing custom recovery, custom ROM from the beginning. i would skip flashing bootloader though.
Click to expand...
Click to collapse
please provide a link for the same tutorial (step by step)

Honor 8 can't boot up to TWRP recovery lost my root access

Hi i own an honor 8 FRD-L09 and it's rooted , so the other day i updated the EMUI from 4.1 to 5.0 and my xposed installer said frame work is not intsllad and then i checked my supper su and it said my phone was not rooted and that this point i was what!!
so tried to boot up to the TWRP recovey and gusses what i cant and frist it showed my the the phone recovey options not the custom TWRP that i installed before. i flased The TWRP Recovey in to my phone and wrote the commoade [adb reboot recovery] so it would boot the TWRP That i just flashed but gets stuck on your devie is booting now for 20 min!!! so i thought and this moment hey what not factory rest your phone and everthing mabye the then i can re root my phone but once agian it got stuck on the same screen as when i tried boot TWRP [ YOUR DEVICE IS BOOTING NOW] So a this point i gave up and i wonder did this happedn to you guys who updated ther honor 8 and can you re root you phone again?
oh P.S when i hold the power and volume down buttom my phone turns on when i hold the power and volume up buttom for tre sec it goes to the honor 8 revory mode not the twrp and its saying download the new version of the recovey and its fails evey time and when hold the power and the volume buttom simultaneously i think it't trying to boot the TWRP recovey but it get's stuck on you deviec is booting now screen.
and soryy for my english the my frist languages

i too faced the same problem. some one please help

While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.

Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Mine won't boot to TWRP and when I use the EMUI boot screen its saying it can't connect to Huawei erecovery servers. So I can't even wipe the root at this point. Any ideas?

Many Thanks!
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Well this worked for me, after a day of googling. the twrp-3.1.1-1-frd.img worked, it may have been following the instructions about "fastboot reboot, while holding the volume up.

hey guys.. having the same issue..
I have DUK-L09C432B183 bootloader unlocked and phone u locked..
I downloaded twrp and side loaded with adb/fastboot
but when I reboot (fastboot reboot) it doesn't enter twrp recovery but emui recovery menu.. any suggestions?
(I tried fastboot reboot whole holding volume down.. didn't work)

ok [EDIT] i could finally get TWRP installed .. i backup everything on external SD
then i flashed MAGISK.zip (v14) and from there phone will show HONOR and jsut now it booted into HUAWEI Erecovery and gives me 2 options "factory data reset "Q or Download latest version and recovery !
any suggestions how i can ROOT it ? should i keep on try with MAGISK or ? thank you guys !
SECOND EDIT
so i did FACTORY data reset.. then i ADB side loaded twrp emmc .. then i installed magisk 13.3 .. rebooted and everythign goodf ! i've twrp and device is rooted !!
all good

Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Thank you so much for linking to that image file! I was looking on the internet for days!

Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Hi,
If I used the official TRWP 3.1.1 first and it didn't work, can I just go ahead and flash the TWRP using the modified twrp.img at the above link to see if that works?

MATE 7 not booting

Hi, need some urgent help here.
I was trying to install a custom rom, so I unlocked first the bootloader, then flashed twrp 3.0.2 for Android 5.1 and with it I flashed KangVip rom (porto from honor 6).
Problem was it didn't boot, just black screen.
So I supposed the problem was with the rom so I flashed via fastboot the aosp 6, obviously with same results.
I tried lot of stuff (twrp 2.8.x.x, reinstall stock firmware, restore twrp backup of stock full firmware and so on - I did almost everything I could do) and now I'm with a Huge problem: no huawei logo at start, just a white screen and nothing happen. I have twrp 3.0.2 for 5.1 installed right now but I can't install stock recovery.
Please help me, what do I gotta do?
[emoji30]

the ported rom is based on Android 6.0 you have Android 5.1 youk should flash 5.1 based rom..
it's good to flash stock and update official to b560 or b571 depending on which region to have then flash twrp recovery and then flash desire rom..

fazi2015 said:
the ported rom is based on Android 6.0 you have Android 5.1 youk should flash 5.1 based rom..
it's good to flash stock and update official to b560 or b571 depending on which region to have then flash twrp recovery and then flash desire rom..
Click to expand...
Click to collapse
Thx for this.
But I have a problem, I can't install stock recovery and if I try to flash the .img files extracted from update.app nothing happens.
Also, I still have that problem with huawei logo disappeared and a blank white screen instead.
Sent from my HUAWEI GRA-L09 using Tapatalk

boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....

fazi2015 said:
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
Click to expand...
Click to collapse
Solved, thanks!
Sent from my HUAWEI GRA-L09 using Tapatalk

fazi2015 said:
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
Click to expand...
Click to collapse
Hope you can help me out here...I had just gotten my HAM7 for a couple of days. Was on 4.4.2 B120, was able to get it up to B326. Just yesterday I attempted to flash up to B331 and it succeeded according to the "local update" option. Then it went on boot loop. I tried doing the force 3-button option and that worked to the point of saying it succeeded and will reboot. Now I'm stuck on Ascend Mate logo. I can no longer get into factory option mode (V+Power), only fastboot mode. Also, I can't do force update no more so I can't try any other "update.app" unless I'm missing something here.
Any help in getting this unit at least back to working condition will be a BIG help. I just received this two days ago.
Thx!!!!

jfer671 said:
Hope you can help me out here...I had just gotten my HAM7 for a couple of days. Was on 4.4.2 B120, was able to get it up to B326. Just yesterday I attempted to flash up to B331 and it succeeded according to the "local update" option. Then it went on boot loop. I tried doing the force 3-button option and that worked to the point of saying it succeeded and will reboot. Now I'm stuck on Ascend Mate logo. I can no longer get into factory option mode (V+Power), only fastboot mode. Also, I can't do force update no more so I can't try any other "update.app" unless I'm missing something here.
Any help in getting this unit at least back to working condition will be a BIG help. I just received this two days ago.
Thx!!!!
Click to expand...
Click to collapse
are you have unlock bootloader or not..

fazi2015 said:
are you have unlock bootloader or not..
Click to expand...
Click to collapse
Yes, bootloader is unlocked. FYI, I can't do Vol+ Power or 3-button force. I have no idea what went wrong after the B331 update.app flash. It said successful then boot loop after. I have looked all over the forums and tried everything from flashing C900B300 rollback to try and get 4.4.2 that I started out with, but I really don't know which firmware to start with. The last update.app files I was using was the European variants. Phone was originally locked to Ecuador MoviStar network at B120SP04, then I flashed up to B324 5.1.1. Rooted and then wanted to upgrade to B331 so I unrooted and flashed. Now I'm stuck.

jfer671 said:
Yes, bootloader is unlocked. FYI, I can't do Vol+ Power or 3-button force. I have no idea what went wrong after the B331 update.app flash. It said successful then boot loop after. I have looked all over the forums and tried everything from flashing C900B300 rollback to try and get 4.4.2 that I started out with, but I really don't know which firmware to start with. The last update.app files I was using was the European variants. Phone was originally locked to Ecuador MoviStar network at B120SP04, then I flashed up to B324 5.1.1. Rooted and then wanted to upgrade to B331 so I unrooted and flashed. Now I'm stuck.
Click to expand...
Click to collapse
now you should flash twrp recovery in fastboot mode and then flash a custom rom like kangvip I'll send you link soon...

fazi2015 said:
now you should flash twrp recovery in fastboot mode and then flash a custom rom like kangvip I'll send you link soon...
Click to expand...
Click to collapse
Thank you very much....hope that will solve the boot issue and bring this unit back to life

Alright, so I've given up complete hope that I can get my unit back up and running again. I've tried so many ways already with no success (fastboot/adb, force upgrade, etc.,), and even tried to copy my second HAM7 images (via sdk tools) and to no avail.
The thing I'm trying to understand is where exactly do I start with trying to revive? When I first got this device from eBay, it was apparently still on "MoviStar" Telefonica-Spain network so my network bars showed "R" for roaming. Somehow, I was able to flash it from being on V100R001C00B120SP04a and upgrade to B127>B145>B324 which made me able to use my own service normally. It worked fine and I was even able to root it. Decided to do a last upgrade to B331 and while the local update option showed it as successfully installed, it went into boot loop ever since. Hence, I used European firmwares for most of the flashing. My second mate was on B145 and I was able to get that to B331, which is running fine right now.
ATM, I am ONLY able to do Volume-/Power to get into fastboot.
Doesn't work:
- V+/Power (stock recovery)
- V-+/Power (3-button force)
What works:
- V-/Power with USB for fastboot
*Bootloader is unlocked, but I do believe that after flashing the last firmware of B331, I may have done a factory wipe, which probably reset the USB debugging option as well. So, I'm sure I'm stuck with a device that just might be flashed on the wrong firmware and is factory reset which prevents me from flashing a custom rom or even the stock rom???
Any last advice I would be so thankful for...still waiting on the link for KangVip rom from (fazi2015)
All the best...

jfer671 said:
Alright, so I've given up complete hope that I can get my unit back up and running again. I've tried so many ways already with no success (fastboot/adb, force upgrade, etc.,), and even tried to copy my second HAM7 images (via sdk tools) and to no avail.
The thing I'm trying to understand is where exactly do I start with trying to revive? When I first got this device from eBay, it was apparently still on "MoviStar" Telefonica-Spain network so my network bars showed "R" for roaming. Somehow, I was able to flash it from being on V100R001C00B120SP04a and upgrade to B127>B145>B324 which made me able to use my own service normally. It worked fine and I was even able to root it. Decided to do a last upgrade to B331 and while the local update option showed it as successfully installed, it went into boot loop ever since. Hence, I used European firmwares for most of the flashing. My second mate was on B145 and I was able to get that to B331, which is running fine right now.
ATM, I am ONLY able to do Volume-/Power to get into fastboot.
Doesn't work:
- V+/Power (stock recovery)
- V-+/Power (3-button force)
What works:
- V-/Power with USB for fastboot
*Bootloader is unlocked, but I do believe that after flashing the last firmware of B331, I may have done a factory wipe, which probably reset the USB debugging option as well. So, I'm sure I'm stuck with a device that just might be flashed on the wrong firmware and is factory reset which prevents me from flashing a custom rom or even the stock rom???
Any last advice I would be so thankful for...still waiting on the link for KangVip rom from (fazi2015)
All the best...
Click to expand...
Click to collapse
https://mega.co.nz/#!3N4RzbJY!saB4NY...Ao5goVNiSXAjEc
I am not 100% sure about this rom but you can try it in fastboot you should flash twrp recovery first..

fazi2015 said:
https://mega.co.nz/#!3N4RzbJY!saB4NY...Ao5goVNiSXAjEc
I am not 100% sure about this rom but you can try it in fastboot you should flash twrp recovery first..
Click to expand...
Click to collapse
Unfortunately, it says the file is no longer available

jfer671 said:
Unfortunately, it says the file is no longer available
Click to expand...
Click to collapse
try this all information is here
https://forum.xda-developers.com/mate-7/orig-development/rom-kangvip-rom-mate7-emui3-1-b351-t3228597

fazi2015 said:
try this all information is here
https://forum.xda-developers.com/mate-7/orig-development/rom-kangvip-rom-mate7-emui3-1-b351-t3228597
Click to expand...
Click to collapse
Okay, so final result is I'm stuck on a frozen logo now. The twrp bat file again showed success in flashing and rebooted the device, but I'm hung on the "Huawei Ascend" logo. I have to pull the battery to shut it off, otherwise it stays on. So I'm now sure that it's a hard bricked device since I did the stupid thing of factory resetting which probably reset the usb debug...making it almost impossible to flash any firmware now.
Thanks for the help anyways...I really appreciate it. Gonna throw this up on eBay and see if anyone wants it for parts

jfer671 said:
Okay, so final result is I'm stuck on a frozen logo now. The twrp bat file again showed success in flashing and rebooted the device, but I'm hung on the "Huawei Ascend" logo. I have to pull the battery to shut it off, otherwise it stays on. So I'm now sure that it's a hard bricked device since I did the stupid thing of factory resetting which probably reset the usb debug...making it almost impossible to flash any firmware now.
Thanks for the help anyways...I really appreciate it. Gonna throw this up on eBay and see if anyone wants it for parts
Click to expand...
Click to collapse
I know it's annoying but last time I research more and guide you I was have same problem don't give up....

I send you recovery flash in fastboot no need of usb debugging usb debugging need for adb not for fastboot in fastboot flash recovery by your self download it
https://mega.co.nz/#!GRw0CZjQ!iZllDkA6yJeWk7iEA4vEVA94r2nM_YjAuiS8B9IZdm0
then extract the zip go to resource and hold shift and left click then select open command port here then power off device completely boot into fastboot (bootloader) connect the device to pc and in command port type
fastboot flash recovery twrp_2_7.img
after that type
fastboot reboot and hold the volume- button of device it'll boot into recovery if you success then reply..

I've noticed two things when flashing KK or LP. On KK, the phone does a constant boot loop with Huawei logo (on off on off), but on LP the Huawei logo hangs...it doesn't boot loop. Is this an indication or just a fault with both OS?