Related
I had a Vibrant before and flashed it constantly. I soft bricked it several time and it was easy just to Odin back to stock and try again. Before I begin to flash Roms on this phone I would like to know how one would fix a bricked Nexus S. I searched "bricked Nexus S" and didn't come up with much.
Sent from my Nexus S using XDA App
Flash a stock img thru fastboot/adb. Just as painless as Odin was if not easier.
Sent from my Nexus S
Yeah I figured that much but I have never used ADB before. What are the commands to flash a stock img and where can I get a stock img? I already have ADB set up, serial # comes up when I enter - adb devices. I'm ready to root and flash but I want to be prepared for anything. I don't want to panic for ten minutes like I did the first time I bricked my Vibrant.
Sent from my Nexus S using XDA App
You should be able to snag a stock image from the development section. As far as what adb commands to use check out any of the root tutorials in development.
Sent from my Nexus S
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
leyvatron said:
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
Click to expand...
Click to collapse
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
kenvan19 said:
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
Click to expand...
Click to collapse
Coolest wife ever? haha
risegeek said:
Coolest wife ever? haha
Click to expand...
Click to collapse
hehe why'd'ya think I married her
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
not enough information is present. you can attempt to get into bootloader / recovery, plug USB to the computer. When plugged, does the computer make a plugged in noise? if it does.. try turning it on, try using adb on it, etc.
as a last resort: if its not rooted or modified in any way, you can go back to best buy and exchange it since you said you've only had it for 3 days
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
First thing to do is pull the battery, let it sit a minute or two, then put the battery back in and try to boot.
Also, try booting into recovery or fastboot. With power off, press and hold volume up button, then press/hold power on switch. You should enter fastboot mode. From fastboot menu, select boot to recovery. The phone will reboot and you'll get to a screen with an "!" and an android robot on it. At that point you press hold power, then press/hold volume up (make note that this is the reverse of what you did earlier).
Once in Recovery, try wiping cache from the menu.
Reboot.
If still no good, then repeat the process but pick factory reset/wipe from the menu in recovery. Note that this will wipe all personal data and apps off the phone but it won't touch your sdcard contents.
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Van_Dyke said:
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Click to expand...
Click to collapse
Last option is to try to trick it into Samsung's Download Mode (see the Odin thread in Development section), but if the keys aren't recognized you can't soft boot into it so you'll need a dongle with a resistor to get there.
Sounds like it's truly a brick at this point. You'll probably have to return it, but I'm concerned about returning a phone that has your personal data on it without being able to wipe it. Doesn't seem like much way around that at this point if you can't get fastboot or download.
get the 301k resistor JIG and then you can go into the download mode even without the 2 keys + usb plug
you can always make your own JIG if you have the materials at home or a nearby Radio shack
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
That's pretty scary that it wouldnt take a charge if run down completelty. But hey handy to know incase it happens to any of us,
If you get any repeat i would take it back to get a fresh battery of course (only right to do so).
here's hoping you never need to though
Van_Dyke said:
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
Click to expand...
Click to collapse
That is scary......
Sent from my Nexus S using XDA App
Bricked
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Noob {MAC User}... Please be gentle
Greetings Everyone,
Okay, so I endeavoured to root my phone last night and was successful. I ran into trouble when the clockwork recovery and superuser permissions kept getting removed each time I reboot.
Now, I'm at the Google splash screen with no way to move forward. I'm a mac user and I don't really get the adb thing. Got adb to work with mac from a youtube video, but still not sure what commands to run.
What I've done so far:
- wiped cache
- wiped/factory data reset
- retraced my steps by using terminal to setup superuser permission from this post (http://forum.xda-developers.com/showthread.php?t=927838)
What I think:
- maybe in all of my clicks I removed the ROM, so the phone doesn't have a ROM to work with.
This maybe a really infantile conclusion, but I know there's a solution (had a rooted G1 that I flashed all the time and thought I bricked once but was able to get it back to stock).
Eagerly waiting for a reply... no cell phone if this can't be fixed.
Tamara
warrenb said:
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Click to expand...
Click to collapse
It would be easier to help you if we knew exactly what you did that caused the problem. You said you tried to unlock it...you mean fastboot oem unlock or something else?
If you can get into fastboot, you're not totally lost, but the computer needs to see the phone to do it.
I'm working in a vacuum here on what your real problem is, but without further details, the things you can try are boot into recovery (from the fastboot mode select boot recovery)...if you're stock recovery, press/hold power, then volume up once you see the android "!". From there wipe cache and whatever else it will let you wipe. Try rebooting. IF that didn't work go back to recovery and try a factory reset of the phone (will delete all your apps and stuff on the phone, but not on the sdcard (pics and stuff).
If none of that works, you can still try getting Clockwork recovery on the phone via fastboot. Boot phone to fastboot and then on computer type the command "fastboot flash recovery <put file name of recovery version you're flashing here>"
Once in clockwork, you should have access to adb via the computer. On your computer go to the Development section here and download any of the various nandroid images posted there. Now you use clockwork mounts and storage menu to mount the sdcard. Then use adb to "adb push <insert path and filename of your nandroid image here> /sdcard"
Unmount the sdcard with the clockwork mounts and storage menu. Now go to the backup menu, select advanced restore and find the nandroid image and restore it.
With any luck, you should be able to boot into a fresh phone.
All right. I messed up. I installed PureMotive's v15 and after Aroma was finished, I clicked "reboot" and....nothing. It briefly flashed the Samsung splash screen, but never did anything past that. It wont boot. It won't boot into recovery. It won't even boot into Download mode to try to Odin back....
It DOES display a charging icon when plugged in via USB. ODIN DOES recognize that something has been plugged in to a COM port; however, it hangs on trying to connect to device (i figured it would, as i can't get into download mode...)
FWIW:
Came from Jovy's last release. Was on Mastamoon's 10.1 prior
Full wipe, cache wipe, dalvik wipe.
I did select custom option, Verizon s3, and the bottom kernel on the Aroma list (forget which one....Ktoonz?)
Not sure what to do, as I have never been here before...
EDIT: ADB not working either....very strange. when trying to run a logcat, it just says waiting for device. Maybe I'm doing something wrong? I'm not terribly proficient at ADB...I am getting a bit concerned though....
i5aac said:
All right. I messed up. I installed PureMotive's v15 and after Aroma was finished, I clicked "reboot" and....nothing. It briefly flashed the Samsung splash screen, but never did anything past that. It wont boot. It won't boot into recovery. It won't even boot into Download mode to try to Odin back....
It DOES display a charging icon when plugged in via USB. ODIN DOES recognize that something has been plugged in to a COM port; however, it hangs on trying to connect to device (i figured it would, as i can't get into download mode...)
FWIW:
Came from Jovy's last release. Was on Mastamoon's 10.1 prior
Full wipe, cache wipe, dalvik wipe.
I did select custom option, Verizon s3, and the bottom kernel on the Aroma list (forget which one....Ktoonz?)
Not sure what to do, as I have never been here before...
EDIT: ADB not working either....very strange. when trying to run a logcat, it just says waiting for device. Maybe I'm doing something wrong? I'm not terribly proficient at ADB...I am getting a bit concerned though....
Click to expand...
Click to collapse
Pull battery hold down power home and vol ip button simultaneously to get to recovery. Hopefully you made a back up prior.
Sent from my SCH-I535 using xda app-developers app
i5aac said:
All right. I messed up. I installed PureMotive's v15 and after Aroma was finished, I clicked "reboot" and....nothing. It briefly flashed the Samsung splash screen, but never did anything past that. It wont boot. It won't boot into recovery. It won't even boot into Download mode to try to Odin back....
It DOES display a charging icon when plugged in via USB. ODIN DOES recognize that something has been plugged in to a COM port; however, it hangs on trying to connect to device (i figured it would, as i can't get into download mode...)
FWIW:
Came from Jovy's last release. Was on Mastamoon's 10.1 prior
Full wipe, cache wipe, dalvik wipe.
I did select custom option, Verizon s3, and the bottom kernel on the Aroma list (forget which one....Ktoonz?)
Not sure what to do, as I have never been here before...
EDIT: ADB not working either....very strange. when trying to run a logcat, it just says waiting for device. Maybe I'm doing something wrong? I'm not terribly proficient at ADB...I am getting a bit concerned though....
Click to expand...
Click to collapse
You didn't brick your phone as it would cease to function.
jmxc23 said:
You didn't brick your phone as it would cease to function.
Click to expand...
Click to collapse
It really has ceased to function. Battery pull to recovery doesn't work. Battery pull to download mode doesn't work. the only sign of life whatsoever is the samsung splash (just for a second), then nothing. plugging the phone in shows a charging animation, but nothing from there.
I've never ran into this but will the phone boot into recovery or download mode if the battery is down to a certain percent? Maybe the battery is dead. Charge it for a few hours and try again.
bobAbooE said:
I've never ran into this but will the phone boot into recovery or download mode if the battery is down to a certain percent? Maybe the battery is dead. Charge it for a few hours and try again.
Click to expand...
Click to collapse
battery is nearly full
jmxc23 said:
You didn't brick your phone as it would cease to function.
Click to expand...
Click to collapse
+1
Bricked phone is a lifeless paper weight.
I believe the correct term for your phone is soft bricked?
Sorry for having no help though :/
sent from that young galaxy on clean ROM!
~ $ adb devices (You have adb setup on your computer right???)
~ $ adb reboot recover # this obviously will get you into recovery
~ $ adb reboot bootloader # this will boot you into download mode
If none of this works im pretty sure Adam Outer has a work around to unbrick the S3. Google is your friend.
Hi I want to know how can I unbrick my Samsung galaxy s 4g. I believe I bricked because now when I turned on only stock in the logo. Please can you help me with this. I'm leontx's wife. Thanks
If it's just showing the logo and it's there for over 15 minutes, you'll probably need to reflash something.
I'd suggest using one of the one-clicks from http://forum.xda-developers.com/showpost.php?p=19601810&postcount=2 and I'd probably suggest the second (Basic with a Twist) choice.
First, you need to get the phone into download mode. Easiest way to do that is to unplug USB cable, pull the battery out, plug the battery back in, and plug the phone back to the computer. Hold the volume buttons on the left and turn on the phone (while holding down the buttons). It should ask you if you want to go into download mode. Press volume+ to confirm, then unplug the phone from your computer and plug it back in (to make the computer realize that there's a device there). Now run the one-click to reflash your phone. If the flash fails, restart the phone and try again. If the phone reboots to a screen showing a little phone and a yellow warning sign, perfect... just flash it again. That's the alternate download screen, and I get it everytime I use Heimdall/Odin/Kies to flash it.
couldn't get into download mode
Hello,thanks for you help,I'm trying to fix my wife's galaxy s after she wiped and factory reset the phone when tried to recovery by herself.Now the phone is stock in the galaxy s 4g logo forever,I tried to get into recovery or download mode but i couldn't.She told me that the phone was giving her a error message about the keyboard app,then she removed the batt and put it back, the battery showed her almost dead like 1% when was like 79% few seconds before,then she called t-mobile and the person told her to do the recovery mode with the bottoms, she did it and the person ask how much batt the phone had, she said 79%.then the person sugested to full charge the batt,and call them(tmobile) back.So here we go... lol:laugh:.She tried to fix it and got into recovery mode and wiped and factory reset the phone,I dont know what she was doing and removed the batt to reboot the phone.and here we are now.When try to get into download mode the pc not recognize it say USB device not reconognized and the phone just show a loading logo but nothing happen.I just want to know if is possible to fix this or toss it,the phone is rooted with a custom rom,I tried with another batt but the same results.Im realy want to recover this phone to give it to my mother in law thank you so much
Leontx said:
Hi I want to know how can I unbrick my Samsung galaxy s 4g. I believe I bricked because now when I turned on only stock in the logo. Please can you help me with this. I'm leontx's wife. Thanks
Click to expand...
Click to collapse
i soft brick may phone yesterday, i use to flash my current rom and then reflash it again [clean flash] i just reflash it to save my game replay..
if you can boot into recovery mode, reflash your current rom and then backup and wipe everything exept sdcard then flash again.
Sounds like the battery crapping out on you & crashing while it was doing something important. Usually, a factory reset and new battery can fix. But, If the reset failed, it's not a biggie. find any of the one clicks that you might like to try (lumin30 has a awesome guide/thread w/ links). Batteries are cheap. Sometimes they will swell up when they die. If it spins easy when placed on flat surface is an easy check. There are a couple threads with links to 10 buck replacements around too.
Sent from my NookTablet using xda app-developers app
eureka !!!
my phone is alive.I could put it in download mode by removing the batt,put it back then holding both volumes bottoms,then connecting the phone to my pc(USB),no power bottom.and voila after putting this in download move everything else is piece of cake thank yall.
Firstly hi to all you clever folks:good:
I dont know what to do now but here is my fault.
1-I flashed a rom kikat to instruction given here,All went well untill the reboot where the samsung logo appears
2-The logo stayed on for 20 minutes and nothing,My battery was 50% at the time.
3-I then loaded my back up from clockwork recovery,rebooted tablet and i was back on 4.1 andriod.
3- i kept getting the 7 error during the the update for the zip.
4-I proceeded to change the file to .doc to take out those first lines,which identifies the product model(i can remember what that was but i fixed it)
5-Now i was getting the 6 error,i then proceeded to fix this via notepad++.(something about changing to hex for unix code)I fixed that
5-while all this the battery was now at 20%.
6-I tried flashing the rom again and this time it worked as all the fixes were in place,as per instruction from the forum.
7- the tablet booted up but still the samsung logo was on,Ok i left it as the first boot takes long,The battery was at 15% at that time.
8-I completely forgot about the tablet,as i was busy fixing a ps3 and psp with cfw.
9-I remembered gawd damnit.
10-Ran to the tablet and saw the tablet off(i then proceeded to put it in recovery mode but alas,all that came up was a battery sign with a loading gif.
11-Now the tablet is dead and it never really booted.I plugged in the usb and instead of charging it shows the battery sign with a loading circle,its as if the software did not complete for the battery monitoring and usb charging.
12-Is there not a way to charge the battery without going via the OS andriod.Is there not a special charging cable that just charge the battery.
13-My tablet is rooted and is modified in everyway.
My solution
Can this work,I take the back cover off and take the battery out,Fine the + and - and connect a 5v charger to these point.....charging it just enough for a recovery process.If there is someone that know of any other way or the battery pin layouts for charging.
Taking it to a repair centre is not an option,even if it still under warranty(my wife will kill me if she found out i rooted 3 tabs in the house.
I need to fix via incognito .I am good in what i do ,but xda members are good in what they do and far better clued up with these problems.Let me know what you guys and gals come up with...........thank you for reading my plight
Use original charger for the tab - USB-Ports and other charger maybe don't have enough power to charge it, or only charge it slow.
Press the Power-Button ~ 30 seconds to turn it into chargeing mode when it's connected.
boot into download-mode and update your recovery (you need up-to-date-recovery to flash KitKat Roms, else you'll get error7) - link in my signature.
redownload the rom.zip and place it on your MicroSD,
Make a wipe data factory reset, format /system, wipe cache and wipe dalvic cache,
flash the rom.zip
reboot your device.
Android-Andi said:
Use original charger for the tab - USB-Ports and other charger maybe don't have enough power to charge it, or only charge it slow.
Press the Power-Button ~ 30 seconds to turn it into chargeing mode when it's connected.
boot into download-mode and update your recovery (you need up-to-date-recovery to flash KitKat Roms, else you'll get error7) - link in my signature.
redownload the rom.zip and place it on your MicroSD,
Make a wipe data factory reset, format /system, wipe cache and wipe dalvic cache,
flash the rom.zip
reboot your device.
Click to expand...
Click to collapse
1-the 30 second thing does not work
2-cant boot into download mode ,i have 3 volts left on battery memory,The tab will not respond
3-the status error 7 i fixed last time and status error 6 i fixed
4-I re downloaded the rom
5-Did the factory reset/format/wipe dalvic and flashed the rom last time,The tab will only boot up the samsung sign,then no further.
btw the tab wont charge ,just a battery icon with loading circle.
Did you flashed anything else? Maybe broken EFS? If s you´ll stuck at Samsung Logo and System won´´t boot.
Can you reach the device on adb in recovery?
In a german forum i had 2 guys breaking EFS by flashing CWM wich wasn´´t made for Tab 2
edit:
You can boot into download-mode from recovery You´´kll find that option.
Android-Andi said:
Did you flashed anything else? Maybe broken EFS? If s you´ll stuck at Samsung Logo and System won´´t boot.
Can you reach the device on adb in recovery?
In a german forum i had 2 guys breaking EFS by flashing CWM wich wasn´´t made for Tab 2
edit:
You can boot into download-mode from recovery You´´kll find that option.
Click to expand...
Click to collapse
You know what i opened the tab and charged the battery with 5v usb at 300ma.The tab booted up and i got into recovery(clock work touch mod)
Its so bad luck for me,i had enough power to do a recovery from zip but somehow the sd card wont work,I tried the sd card in my pc and its actually broken,There is no response.
I loaded my back up zip on another sd card,The tab battery is flat now and i am gonna charge it external again for 2 hours,Then go back to cwm and restore to my original rom backup.Will let you know how its going.
dablakmark8 said:
You know what i opened the tab and charged the battery with 5v usb at 300ma.The tab booted up and i got into recovery(clock work touch mod)
Its so bad luck for me,i had enough power to do a recovery from zip but somehow the sd card wont work,I tried the sd card in my pc and its actually broken,There is no response.
I loaded my back up zip on another sd card,The tab battery is flat now and i am gonna charge it external again for 2 hours,Then go back to cwm and restore to my original rom backup.Will let you know how its going.
Click to expand...
Click to collapse
tablet is back to android 4.1.2
This tab blet will not boot up if i try custom roms.I flashed 3 already.Gonna try one more time
Don´t forget to backup EFS !
Sounds like you forgot something at install-process of the custom rom
Android-Andi said:
Don´t forget to backup EFS !
Sounds like you forgot something at install-process of the custom rom
Click to expand...
Click to collapse
but
Did the battery trick again,Got into recovery and flashed 4.4 kitkat,All is well.
Only one problem now, I have so little internal memory space.I deleted the cwm backup rom,I am trying to create space but cant seem to find whats taking up so much.
If only there was an app that would do this for me.
dablakmark8 said:
but
Did the battery trick again,Got into recovery and flashed 4.4 kitkat,All is well.
Only one problem now, I have so little internal memory space.I deleted the cwm backup rom,I am trying to create space but cant seem to find whats taking up so much.
If only there was an app that would do this for me.
Click to expand...
Click to collapse
Got to Setting-> Storage and in internal storage,,,check for misc.....you might have some residual directory related to games that is not usable sometimes.,,,,,try removing it,,,
lokesh.3440 said:
Got to Setting-> Storage and in internal storage,,,check for misc.....you might have some residual directory related to games that is not usable sometimes.,,,,,try removing it,,,
Click to expand...
Click to collapse
yes i have,there is 8 gigs that is unaccounted for.I can see what is taking up that space
dablakmark8 said:
yes i have,there is 8 gigs that is unaccounted for.I can see what is taking up that space
Click to expand...
Click to collapse
Are you able to remove it now ?
lokesh.3440 said:
Are you able to remove it now ?
Click to expand...
Click to collapse
No i cant see whats taking up space,no hidden files or scrappy stuff,
Hi Guys,
my phone is dead and i have no clue what the issue is.
My S6 just turned off out of nowhere and can't be switched on anymore. It will only show the charge sign for a few seconds after plugin in and then stops/screen turns off. It can't be started at all.
I bought a new battery but don't think this is the problem. i haven't installed it yet, as something else might be broken.
The phone won't turn on when connected to the usb from the laptop, but i can get it into recovery mode as long as it is connected and install a new firmware.
If i unplug the usb in recovery mode, the phone switches off right away so that might be a power issue.
Once i install a new factory rom through Odin, the black/white Samsung boot screen comes on, then the blue installing screen that counts up the installation percentage, and then the phone turns off around 2-6% and says erasing. Then the phone is completely dead again and i can only get a screen picture by entering recovery mode.
What can it be? Any ideas/suggestions?
i attached some picture and a video of the start up in the .zip file, as i can't upload .mp4.
Thanks
Smiler51
I also don't have a boot-loop or something where the phone continuously reboots.
Maybe something related to the memory of the phone?
try flashing firmware with "NAND Erase All" under Options in Odin, this will wipe /data/ partition, if you get stuck in a blank screen reboot in recovery mode and perform a Factory reset to recreate/format the /data/ partition again.
Starnel said:
try flashing firmware with "NAND Erase All" under Options in Odin, this will wipe /data/ partition, if you get stuck in a blank screen reboot in recovery mode and perform a Factory reset to recreate/format the /data/ partition again.
Click to expand...
Click to collapse
Thanks a lot for that tip.
I tried that and the blue installing screen that counts up the installation percentage doesn't stop at 2-6%, but it stops at 26-32% now, then says erasing, reboots into the same blue installation screen and then turns off.
When i unplug the cable, the phone immediately turns off, so there must be some battery issue as well. Not sure if this is related in any way. I can't get into recovery when only running on battery without a USB cable connected.
Anymore ideas what i could try or it could be?
I think, that because of battery your phone died while flashing in Odin and that's why you can't flash anything now
kapiszon53 said:
I think, that because of battery your phone died while flashing in Odin and that's why you can't flash anything now
Click to expand...
Click to collapse
The phone is connected to the USB though. Wouldn't that provide enough juice to power the phone while flashing?
I can install the new battery i bought but if that is not the reason, i can't return it anymore.
Does the USB provide enough power when flashing?
smiler51 said:
Thanks a lot for that tip.
I tried that and the blue installing screen that counts up the installation percentage doesn't stop at 2-6%, but it stops at 26-32% now, then says erasing, reboots into the same blue installation screen and then turns off.
When i unplug the cable, the phone immediately turns off, so there must be some battery issue as well. Not sure if this is related in any way. I can't get into recovery when only running on battery without a USB cable connected.
Anymore ideas what i could try or it could be?
Click to expand...
Click to collapse
This is 99% a dead battery, try replacing it. If you have enough time to disconnect and connect to your Wall charger you could try that.
Usb is not enough to keep the phone on, neither charge the battery at the same time
Starnel said:
This is 99% a dead battery, try replacing it. If you have enough time to disconnect and connect to your Wall charger you could try that.
Usb is not enough to keep the phone on, neither charge the battery at the same time
Click to expand...
Click to collapse
I have installed the new battery.
It is working now... Wow, i didn't know that no charge in the battery will create such a problem
Thanks for the help!