Database Info

New to the android rom system and need some help as im very lost

So i own a Samsung p3110 but i followed a Samsung p3100 video tutorial and download the files of p3100 for it and realize my tablet recognised itself as p3100 instead of p3110 . so my p3110 rom files would not work. Will that affect anything?
and apparently i installed cwm with root and installed cm 13 and i check the root and its gone what happened?
lastly i tried to install lineage os on my tablet , the tablet flashed the p3100 lineage rom and it got stuck on the boot animation. i saw that people needed to update cwm to make the lineage os flashing works . so how can i do that or is there any clues or suggestion that my lineage os rom is not working?
i really need your help , i would be very grateful if you could help me . thanks

Theevanz said:
So i own a Samsung p3110 but i followed a Samsung p3100 video tutorial and download the files of p3100 for it and realize my tablet recognised itself as p3100 instead of p3110 . so my p3110 rom files would not work. Will that affect anything?
and apparently i installed cwm with root and installed cm 13 and i check the root and its gone what happened?
lastly i tried to install lineage os on my tablet , the tablet flashed the p3100 lineage rom and it got stuck on the boot animation. i saw that people needed to update cwm to make the lineage os flashing works . so how can i do that or is there any clues or suggestion that my lineage os rom is not working?
i really need your help , i would be very grateful if you could help me . thanks
Click to expand...
Click to collapse
firstly you have to upgrade your cwm recovery with the latest common twrp from android-andi.
you can download here http://andi34.github.io/recoveries_tab2.html

smart-t78 said:
firstly you have to upgrade your cwm recovery with the latest common twrp from android-andi.
you can download here
Click to expand...
Click to collapse
urm i very new to the rooting community so i do not know how to upgrade the cwm recovery.
do you use odin? i read about using your root devices to update your bootlocker but i am not sure why my device lost root access. so is there a guide that you can hook me up with?
thank for helping me i really really appreciate it

Theevanz said:
urm i very new to the rooting community so i do not know how to upgrade the cwm recovery.
do you use odin? i read about using your root devices to update your bootlocker but i am not sure why my device lost root access. so is there a guide that you can hook me up with?
thank for helping me i really really appreciate it
Click to expand...
Click to collapse
Hi!
Install TWRP via adb : https://www.xda-developers.com/how-to-install-twrp/
By the way, in CM13 the root access can be controlled via "developer options". If you have CM13 already installed, you just need to enable root access in developer options.

osztosa said:
Hi!
Install TWRP via adb :
By the way, in CM13 the root access can be controlled via "developer options". If you have CM13 already installed, you just need to enable root access in developer options.
Click to expand...
Click to collapse
after alot of searching and reading up i found how to make my computer detect my tablet . i did "adb reboot bootloader" and my tablet went into this screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
its stuck there and others say its used for odin and when i typed adb devices my tablet is not there anymore
additional info . my tablet heats up at this stage

Theevanz said:
urm i very new to the rooting community so i do not know how to upgrade the cwm recovery.
do you use odin? i read about using your root devices to update your bootlocker but i am not sure why my device lost root access. so is there a guide that you can hook me up with?
thank for helping me i really really appreciate it
Click to expand...
Click to collapse
if you are on cwm recovery, you only need to download the common twrp as zip. install it with your current cwm and reboot once.
if you have problems with signature verification, you can disable it in cwm settings.

smart-t78 said:
if you are on cwm recovery, you only need to download the common twrp as zip. install it with your current cwm and reboot once.
if you have problems with signature verification, you can disable it in cwm settings.
Click to expand...
Click to collapse
I went to the offical website but there is no zip file. there is only img and tar. where should i get it from?

Theevanz said:
I went to the offical website but there is no zip file. there is only img and tar. where should i get it from?
Click to expand...
Click to collapse
http://andi34.github.io/recoveries_tab2.html
you need 3.0.1-2

smart-t78 said:
http://andi34.github.io/recoveries_tab2.html
you need 3.0.1-2
Click to expand...
Click to collapse
YES IT WORKED LINEAGE IS WORKING. I OWE YOU A BIG ONE! saved my tablet from dieing ??

[RECOVERY] OFFICIAL TWRP for Asus Zenfone Max Pro M2 (X01BD)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Code:
/**
* What you do with your device is your choice.
* None of the developers of this software will be held accountable for any damages to your device or to third parties.
* You should know this by now.
**/
What's this?
This is TeamWin Recovery Project for our Asus Zenfone Max Pro M2 (X01BD)
Known Issues
None
Requirements
Unlocked bootloader
Computer/Laptop
Common sense and a X01BD
Downloads
https://twrp.me/asus/asuszenfonemaxprom2.html
https://github.com/kubersharma001/twrp_device_asus_X01BD/releases/download/v1.0/recovery.img
XDA:DevDB Information
TeamWin Recovery, Tool/Utility for the Asus Zenfone Max Pro M2
Contributors
kubersharma, bauuuuu
Version Information
Status: Stable
Created 2019-04-01
Last Updated 2019-07-11

UNOFFICIAL/PERSONAL BUILDS:
https://sourceforge.net/projects/kubersharma001/files/X01BD/TWRP/
About TWRP:
https://twrp.me/about/
Frequently Asked Questions
Q1 How to flash the recovery image?
A1. Via Fastboot or if you are already in TWRP, then flash the twrp image in recovery partition.
Read FAQs here: https://twrp.me/FAQ/
Sources
twrp_device_source: https://github.com/kubersharma001/twrp_device_asus_X01BD
kernel_source: https://github.com/ArrowOS-Devices/...tree/91f4373a4141cf43379882fa115c7bb51e090ecc
twrp manifest: https://github.com/minimal-manifest-twrp

Superb, Good to know this. This is the most stable recovery for our device, thanks.

Awesome ?

Nice Work
Edit : Just Tried to Flash Stock Oreo along with Decrypt Zip but it is Still Encrypting the Storage

Right now my device is on PBRP
How can I install TWRP now?

Vishurules28 said:
Right now my device is on PBRP
How can I install TWRP now?
Click to expand...
Click to collapse
Via Fastboot mode,
boot your device in fastboot, put recovery.img with adb and fastboot files and run following command
Code:
fastboot flash recovery (recovery name).img

nice_guy75 said:
Via Fastboot mode,
boot your device in fastboot, put recovery.img with adb and fastboot files and run following command
Click to expand...
Click to collapse
Thanks but I found another way
Flashed TWRP as img from PBRP install menu. TWRP was installed successfully.

Stock recovery persisting
Even though I got all OKs on flashing recovery, I still boot into STOCK recovery. IMPORTANT QUESTION: Is this recovery file compatible with the PIE UPDATE?
My Zenfone M2 PRO is on Pie since last week, and I unlocked the bootloader recently with Asus official bootloader unlocker. Help is appreciated.

TheKing88 said:
Even though I got all OKs on flashing recovery, I still boot into STOCK recovery. IMPORTANT QUESTION: Is this recovery file compatible with the PIE UPDATE?
My Zenfone M2 PRO is on Pie since last week, and I unlocked the bootloader recently with Asus official bootloader unlocker. Help is appreciated.
Click to expand...
Click to collapse
Use the twrp from telegram group..that one is working fine.

Thank you my man!! I got it working

I was able to encrypt the device....but when I try to decrypt it always says wrong password...Am I missing anything??

shravankoppesetty said:
I was able to encrypt the device....but when I try to decrypt it always says wrong password...Am I missing anything??
Click to expand...
Click to collapse
Same with me

Hey guy's, TWRP for X01BD is now OFFICIAL!
https://twrp.me/asus/asuszenfonemaxprom2.html
Enjoy

Can we flash the software OS provided in the ASUS website ??
Can we downgarde from pie to oreo provided by Asus in website.?

finally. it's official. thanks you so much.

Vishurules28 said:
Thanks but I found another way
Flashed TWRP as img from PBRP install menu. TWRP was installed successfully.
Click to expand...
Click to collapse
You have X01BD or X01BDA? I have X01BDA, can I flash this official TWRP recovery?
@kubersharma, can I use this official TWRP on X01BDA as well?

nice_guy75 said:
You have X01BD or X01BDA? I have X01BDA, can I flash this official TWRP recovery?
@kubersharma, can I use this official TWRP on X01BDA as well?
Click to expand...
Click to collapse
Yes you can. I have a X01BDA too. The difference is that X01BDA has nfc and X01BD do not.

Decryption not working in Evolution-X ROM, anyone else can confirm the same?

nice_guy75 said:
You have X01BD or X01BDA? I have X01BDA, can I flash this official TWRP recovery?
@kubersharma, can I use this official TWRP on X01BDA as well?
Click to expand...
Click to collapse
Yes, you can.
mauam said:
Yes you can. I have a X01BDA too. The difference is that X01BDA has nfc and X01BD do not.
Click to expand...
Click to collapse
Oh, didn't know that but i don't think it's true since I've seen the X01BDA model in India without NFC as well but i am not sure

Unofficial twrp and custom rom flashing on doogee s70 lite.

To anyone that is not familiar running media Tek chipsets like I am here is a guide and some info for anyone that wants to flash a custom image and recovery on there doogee s70 lite phone. Before I start.
WARNING !!!!!This will void your warranty and potentially damage or brick your phone. Do at your own risk. If your a beginner look into unlocking your bootloader and rooting your phone before attempting this. To do this you will need to unlock your bootloader I did mine by simply enabling developer options. enabling oem unlock and booting into adb and fastboot from my computer. to get into fastboot first intstall the proper drivers and Android device manager on your computer then in a command prop type "adb reboot bootloader" then "fastboot oem unlock" was that simple for me.
Flashing recovery.
First there is no official or unofficial recovery for the doogee s70 lite yet as far as I know. you can port one for this phone using the mediatek scatter file for this phone . there is a guide here on XDA if you want to go that route. What I tried and actually had work since they are almost identical in specs they both use the mediatek hello p23 soc. I downloaded and flashed the unofficial twrp recovery for the doogee s80 lite and so far so good it has the same issues as the s80 lite with encryption ECT ECT but I had no problem flashing it to the recovery partition in fast boot. And when it does boot up the twrp recovery says "ulefone power 5" don't be alarmed I'm sure it's just another twrp image that has been modified if I remember correctly the maker was "Nemo Nemo" anyways thank you for the twrp port. Also you don't have to flash a custom recovery if you don't want to but now you have the option.
I did everything in fastboot and you will have to use fastboot for flashing a custom version of Android.
Flashing a custom rom/os
Ok I did not know this but this device is project treble compatible if you do not know what project treble is look it up. Anyway you can flash project treble compatible generic Android images on this device. I am currently running the unofficial version of lineage os 15.1 on my doogee s70 lite with no major issues or bugs yet.
Also I have not tested it yet to see if it works but from what I can see so far is that it has enabled the Miracast display option again I'm not sure if it works yet I have not tested it I'm also not sure if this phone will support it hardware wise but I did notice it and tried it with no issues or freezing. I Am planning on flashing resurrection remix and trying it out anyway hope that was helpful for more info check out porting on mediatek devices, check out project treble ,also check out the resurrection remix project and of course the lineage os project thank you.

Help
Hi, what version of the linage os 15.1 did you install? Doogee isnt´t in the compatibility list...

It was phussons unofficial lineage os GSI treble rom.
lucaspc82 said:
Hi, what version of the linage os 15.1 did you install? Doogee isnt´t in the compatibility list...
Click to expand...
Click to collapse
It was phussons unofficial lineage os GSI treble rom. Also I did have some compatibility issues but I think I flashed a older version of the GSI rom. This phone checks out as project Treble compatible but no one has done any development specifically for it alone. I had the best results flashing and running the phussons project Treble asop Android 9.0 GSI rom I had cell service and everything worked fine the only issue I had was the mediatek engineering mode would not work. From what I understand it has something to do with mediatek and there processor code not being open source don't quote me on that. but because of something like that nobody has done hardly any dev work on this phone and others with media tek soc's.

Dualthoughts84 said:
It was phussons unofficial lineage os GSI treble rom. Also I did have some compatibility issues but I think I flashed a older version of the GSI rom. This phone checks out as project Treble compatible but no one has done any development specifically for it alone. I had the best results flashing and running the phussons project Treble asop Android 9.0 GSI rom I had cell service and everything worked fine the only issue I had was the mediatek engineering mode would not work. From what I understand it has something to do with mediatek and there processor code not being open source don't quote me on that. but because of something like that nobody has done hardly any dev work on this phone and others with media tek soc's.
Click to expand...
Click to collapse
TI needed to make work miracast. Finally i sold the phone and bought an ulefone armor 6e. That was the solution. Thanks

S80 here, worked using SP_Flash tool to flash twrp and UnofficialLineage18.1(with no GAPPS) IMGs. Used no-verity6 to temporarily gain access to encrypted user partition, reboot into TWRP and factory reset....WHEW... it was about 3 days of fkn around.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[ROM][NAIRO][11][UNOFFICIAL][GAPPS] ArrowOS

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ArrowOS​
ArrowOS is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate to us
Blog: blog.arrowos.net
WHAT WORKS?
Almost everything
WHAT DOESN'T WORK?
You tell me
Be sure to include a log : via the Matlog app included or check how to
DOWNLOADS
Here!
INSTALLATION
Unlocked Bootloader Required: google "unlock motorola bootloader"
Download the ArrowOS zip and copy to your external sd card
Download/Install firmware with the latest version of Moto Flash Tool
(this tool also prepares the b slot for custom rom installation)
Boot to the start/welcome screen
Power off and reboot to the bootloader/fastboot interface (power and volume down)
Install TWRP to slot a and slot b
Code:
fastboot flash recovery TWRP.img
fastboot flash recovery_b TWRP.img
Boot to TWRP (navigate with the volume buttons, select recovery, press power)
FORMAT DATA!!
Flash the ArrowOS zip
REBOOT TO RECOVERY!!
Reboot to system
Profit
*** Dont install Magisk until you have booted the ROM once
ROM Source: https://github.com/ArrowOS
Kernel Source: Stock Motorola Kernel
Device Source(s): https://github.com/omnirom/android_device_motorola_nairo
https://github.com/omnirom/android_device_motorola_dynamic_common
https://github.com/omnirom/android_device_motorola_sm7250_common
Vendor Source: https://github.com/DonkeyCoyote/proprietary_vendor_motorola
Many thanks to @vache for the above device/vendor trees, the flash tool, and building TWRP. The guy's a legend!

Reserved

Just in case..

Thank you to the developer! Finally someone showing the Nairo some love.
Definitely going to test this one…. !

There is also Omni-Rom available on telegram, built by vache, the twrp/device tree builder.
If you search moto g 5g plus official you should find the group.

I followed all steps but the rom won't flash error

Any advice ?

Love this ROM right from day 1!
Vache, will you add it to the ArrowOS website?
Will it have updates?
What about OTA, how can we enable it since TWRP does not allow so.
- Moto camera complain about updates
- As you know, Hey Google does not work
Thanks a lot
Wajdy

wajdyz said:
Love this ROM right from day 1!
Vache, will you add it to the ArrowOS website?
Will it have updates?
What about OTA, how can we enable it since TWRP does not allow so.
- Moto camera complain about updates
- As you know, Hey Google does not work
Thanks a lot
WajdyView attachment 5268655
Click to expand...
Click to collapse
Hey man, yeah there will be updates, more than likely monthly when the new security patch comes out, sooner if there's new features released. As for OTA updates, it won't happen as long as the builds are unofficial. But updating is no problem, just download and flash the update in twrp and reboot

Start of something big? I hope so

fawazed said:
Any advice ?
Click to expand...
Click to collapse
Were you able to resolve?

Got it to install. The essential part for me is -
Download/Install firmware with the latest version of Moto Flash Tool
After that flashing works like a charm. I will post more updates shortly.
Edit: Boot to system failed :-( with unable to open loop device. I tried it multiple times, all the steps from the start, but unfortunately same error. Does it matter if flash the Android 10 or 11?
I will attempt if I get the same error with omnirom.

peacemaker885 said:
Got it to install. The essential part for me is -
Download/Install firmware with the latest version of Moto Flash Tool
After that flashing works like a charm. I will post more updates shortly.
Edit: Boot to system failed :-( with unable to open loop device. I tried it multiple times, all the steps from the start, but unfortunately same error. Does it matter if flash the Android 10 or 11?
I will attempt if I get the same error with omnirom.
Click to expand...
Click to collapse
are you definitely rebooting to recovery after flashing the zip?
and are you formatting data, not just wiping?

Beetle84 said:
are you definitely rebooting to recovery after flashing the zip?
and are you formatting data, not just wiping?
Click to expand...
Click to collapse
Thanks so much for following up. I realized that when I was using the Moto Flash Tool, I was ending it too early. I rebooted the phone after the first "completed" and missed the second phase where it prepares slot b. I truly appreciate your efforts and now running ArrowOS on the Moto G 5G Plus. Thanks so much!

Nice rom do I got brightness issues do I need a logcat for that I will get it later today

wesleyvanneck12345678 said:
Nice rom do I got brightness issues do I need a logcat for that I will get it later today
Click to expand...
Click to collapse
Hey mate, what is the issue exactly?

Hey o.p hope all is well,.
Will this rom work on the 5GAce Kiev version.?

jhjhjhjhjhjh said:
Hey o.p hope all is well,.
Will this rom work on the 5GAce Kiev version.?
Click to expand...
Click to collapse
No I wouldn't think so, but you guys should have something soon, I'm pretty sure one of the LOS devs for g7 power, among other devices, has your phone

Any update of this rom maby the latest security patch

Yeah mate, sorry. Been busy at the moment. The April patch was done a while ago, I forgot to update the OP. I will have it fixed by the end of the day. Then expect the May one in a week or so

General [SHARED][RECOVERY][UNOFFICIAL] OrangeFox-R11.1-Unofficial

At my request, the same user yurxxl from the 4PDA forum collected this recovery for us.
<><><><><><><>​Attention!!!Recovery just for stock firmware on the 12th android, and customs based on them, including customs on the 13th android.
Kernel Source: prebuilt stock generic kernel image

Guys, even though I had a joint with the "fox", even though I recovered it and put it on the drain, which then on the custom, and stitched the magisk several times, everything loaded perfectly and worked, but when I decided to make the archive below, I stitched the "fox", well, and accordingly I wanted to put the magisk, and figushki, the installation goes fine, but the recovery is not loaded.
I'm just in ....E.
So be careful, I wrote to the author, but I can't even imagine the reason, but it looks like the whole snag is in reassembling the recovery in the magisk, just like the same archive below, also reassembles the recovery, but after that everything works fine.
++++++++++++++++++++
And about the mentioned archive, for whom it is very important to have the newest core, I have collected an archive for recovery.I checked the installation in both twrp and fox, it works fine.Well, screenshots to boot.
it was
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
has become

Guys, who have an error when flashing the archive above in OR, try this one

What does this kernel do?

htcspark said:
What does this kernel do?
Click to expand...
Click to collapse
Nothing, it's just that all custom recoveries (twrp and orangefox) use the kernel from global firmware 13.0.4.0, this archive flashes the kernel from the latest global firmware 13.0.5.0

Sometimes I lose my 4g connection, I have to force it to 3g, and then I can go back to 4g.
Does this mean I'm on an older kernel?
I'm running evolution rom android 13.

1

CoopZor said:
Sometimes I lose my 4g connection, I have to force it to 3g, and then I can go back to 4g.
Does this mean I'm on an older kernel?
I'm running evolution rom android 13. View attachment 5868749
Click to expand...
Click to collapse
No, I had this firmware, that's not the point.
But if you want to check, you can completely update the kernel.

I installed this firmware, I will see if I still lose my 4g connection.
I keep you guys updated.
Thanx for the help.
arraki said:
No, I had this firmware, that's not the point.
But if you want to check, you can completely update the kernel.
Click to expand...
Click to collapse

PixelExtended was posted in telegram, but the most interesting thing is that it is written that it is assembled on the latest firmware 13.0.7.0, and that it is a global that is distributed through MiPilot, **** else to do something on the 12th android, it is not clear, well, okay.
I took out the boot from there and compiled an archive for recovery, and the truth is that the kernel is now from March
Who is interested, we try

I kept forgetting to write
Guys, I wrote above about the bug with installing a magisk on custom with this recovery, the solution to this problem is the firmware along with recovery and vendor_boot, a special item has been added to the recovery for this.
You can put this

Hello there! Is there any way to keep the recovery after a xiaomi.eu update. It gets reverted to the stock one

SpookieGames said:
Hello there! Is there any way to keep the recovery after a xiaomi.eu update. It gets reverted to the stock one
Click to expand...
Click to collapse
As I wrote in the twrp topic, the recovery is in boot, so it will always be changed to stock or custom.recovery in the case of customs during firmware/update.
Just after the firmware /update it needs to be reinstalled again.
The latest firmware from xiaomi.eu already hybrid, it can be completely installed through recovery.
Since we have two ways of firmware, the first is stock-based customs, they are usually put in the active slot, so after the firmware, you just need to re-flash the recovery.
But all customs, such as Evo, are put in an inactive slot, you can understand this from the log in the recovery, in theory, the firmware stock updates should also be put, as the last one is put from xiaomi.eu , I do not know, as I do not want to update yet.
So, if the firmware occurs in an inactive slot, then in this case, after installing the firmware, in the "reboot" recovery point, first switch the slot (which will be visible at this point), then we re-flash the recovery, well, vendor_boot, if we set custom.

I updated the first post, added a new build, the markup was corrected in it, some elements did not match, and most importantly, now the recovery can save screenshots to the SD card, the choice depends on where the backup is selected

How to install it?

Am gonna flash this but before I flash ... can someone tell me if this is with root?
Edit : I flashed it and it worked very good

arraki said:
I updated the first post, added a new build, the markup was corrected in it, some elements did not match, and most importantly, now the recovery can save screenshots to the SD card, the choice depends on where the backup is selected
View attachment 5885819
Click to expand...
Click to collapse
Do I flash it as fastboot flash recovery or fastboot flash boot
Edit : just flashed it worked perfectly thanks

If I downloaded orange fox do I have to flash stock_kernel in orange fox or not necessary?
Edit : just flashed it worked perfectly without stock kernel
Device : redmi note 11 pro + 5g global (SKCIMIXM) works perfectly on this device

can i flash this recovery as an img file?

I just got my 11E Pro to get MIUI 14 which now have vendor boot as recovery. As expected, the recovery no longer work when trying to flash to boot
(And yes it works normally when I'm on MIUI 13, despite having Global kernel in orangefox)
We need new orangefox for veux once MIUI 14 rolls out