Unofficial twrp and custom rom flashing on doogee s70 lite.

Unofficial twrp and custom rom flashing on doogee s70 lite. - Android General

To anyone that is not familiar running media Tek chipsets like I am here is a guide and some info for anyone that wants to flash a custom image and recovery on there doogee s70 lite phone. Before I start.
WARNING !!!!!This will void your warranty and potentially damage or brick your phone. Do at your own risk. If your a beginner look into unlocking your bootloader and rooting your phone before attempting this. To do this you will need to unlock your bootloader I did mine by simply enabling developer options. enabling oem unlock and booting into adb and fastboot from my computer. to get into fastboot first intstall the proper drivers and Android device manager on your computer then in a command prop type "adb reboot bootloader" then "fastboot oem unlock" was that simple for me.
Flashing recovery.
First there is no official or unofficial recovery for the doogee s70 lite yet as far as I know. you can port one for this phone using the mediatek scatter file for this phone . there is a guide here on XDA if you want to go that route. What I tried and actually had work since they are almost identical in specs they both use the mediatek hello p23 soc. I downloaded and flashed the unofficial twrp recovery for the doogee s80 lite and so far so good it has the same issues as the s80 lite with encryption ECT ECT but I had no problem flashing it to the recovery partition in fast boot. And when it does boot up the twrp recovery says "ulefone power 5" don't be alarmed I'm sure it's just another twrp image that has been modified if I remember correctly the maker was "Nemo Nemo" anyways thank you for the twrp port. Also you don't have to flash a custom recovery if you don't want to but now you have the option.
I did everything in fastboot and you will have to use fastboot for flashing a custom version of Android.
Flashing a custom rom/os
Ok I did not know this but this device is project treble compatible if you do not know what project treble is look it up. Anyway you can flash project treble compatible generic Android images on this device. I am currently running the unofficial version of lineage os 15.1 on my doogee s70 lite with no major issues or bugs yet.
Also I have not tested it yet to see if it works but from what I can see so far is that it has enabled the Miracast display option again I'm not sure if it works yet I have not tested it I'm also not sure if this phone will support it hardware wise but I did notice it and tried it with no issues or freezing. I Am planning on flashing resurrection remix and trying it out anyway hope that was helpful for more info check out porting on mediatek devices, check out project treble ,also check out the resurrection remix project and of course the lineage os project thank you.

Help
Hi, what version of the linage os 15.1 did you install? Doogee isnt´t in the compatibility list...

It was phussons unofficial lineage os GSI treble rom.
lucaspc82 said:
Hi, what version of the linage os 15.1 did you install? Doogee isnt´t in the compatibility list...
Click to expand...
Click to collapse
It was phussons unofficial lineage os GSI treble rom. Also I did have some compatibility issues but I think I flashed a older version of the GSI rom. This phone checks out as project Treble compatible but no one has done any development specifically for it alone. I had the best results flashing and running the phussons project Treble asop Android 9.0 GSI rom I had cell service and everything worked fine the only issue I had was the mediatek engineering mode would not work. From what I understand it has something to do with mediatek and there processor code not being open source don't quote me on that. but because of something like that nobody has done hardly any dev work on this phone and others with media tek soc's.

Dualthoughts84 said:
It was phussons unofficial lineage os GSI treble rom. Also I did have some compatibility issues but I think I flashed a older version of the GSI rom. This phone checks out as project Treble compatible but no one has done any development specifically for it alone. I had the best results flashing and running the phussons project Treble asop Android 9.0 GSI rom I had cell service and everything worked fine the only issue I had was the mediatek engineering mode would not work. From what I understand it has something to do with mediatek and there processor code not being open source don't quote me on that. but because of something like that nobody has done hardly any dev work on this phone and others with media tek soc's.
Click to expand...
Click to collapse
TI needed to make work miracast. Finally i sold the phone and bought an ulefone armor 6e. That was the solution. Thanks

S80 here, worked using SP_Flash tool to flash twrp and UnofficialLineage18.1(with no GAPPS) IMGs. Used no-verity6 to temporarily gain access to encrypted user partition, reboot into TWRP and factory reset....WHEW... it was about 3 days of fkn around.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

Treble Rom Testing

Disclaimer:
Only use TWRP for zips and Fastboot for images as TWRP isn't 100% stable yet. This would be my recommendation to anyone else looking to mess around with treble and custom roms. That is unless you know what you're doing. Also I am NOT responsible for any dead or bricked devices.
This threads purpose is for testing and documenting working treble roms for our Moto G7.
Roms that work:
Havoc OS
Roms that DON'T work:
All of Erfan's GSI Ports
Resurrection Remix
Q Developer Preview
Pixel Experience
Prerequisites:
Bootloader must be unlocked
ADB must be installed on a working PC
TWRP installed or able to boot from Fastboot
How to install:
Reboot to bootloader
Install boot.img in fastboot (Linked HERE)
Install the rom.img of your choice in fastboot (Rom must be ARM64 AB also make sure to flash system with the command "fastboot flash system -u your_image.img"))
Wipe userdata in fastboot
Reboot to TWRP and tap wipe, advanced wipe, system, then repair or change file system, then resize file system
Install Magisk (optional) and OpenGapps (also optional but recommended) in TWRP
Reboot and enjoy
PSA - If anyone finds any other working roms please report it on this thread and I will test the rom and update the thread accordingly.

Screenshots of Havoc OS on Moto G7
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Very nice. I will be giving this a shot soon.

Try BlissRoms/LineageOS and Aosp Extended

GamingHero said:
Try BlissRoms/LineageOS and Aosp Extended
Click to expand...
Click to collapse
I'll probably give them a try sometime soon here but just a word of advice. I think only phh-treble roms work on our device atm. So any rom based on the phh-treble source code.

I'm not a fan of project treble. the roms are too buggy. I really miss the days of lineage nightlies. there is literally zero development for the G7

Yeah well treble is just fine. No one wants to develop for specific devices anymore cuz once the correct patches are upstreamed to the treble source code the ROMs will work fine. Phh already has 99% of everything working out of the box for the g7. Just not Bluetooth audio and there isn't an overlay for the notch yet (easy fix).

CurbThePain said:
Yeah well treble is just fine. No one wants to develop for specific devices anymore cuz once the correct patches are upstreamed to the treble source code the ROMs will work fine. Phh already has 99% of everything working out of the box for the g7. Just not Bluetooth audio and there isn't an overlay for the notch yet (easy fix).
Click to expand...
Click to collapse
I'll stick to stock, rooted running edxposed for now.

fix-this! said:
I'll stick to stock, rooted running edxposed for now.
Click to expand...
Click to collapse
What modules are you using with edxposed?

Is there a way to install with TWRP?

How did you install RR. Was it fresh? Did you try to dirty flashover phh asop?

@CurbThePain sorry to go kinda off topic, but i have a g7 power, is it necessary to have a different kernel than stock (magisk patched) to boot a gsi on g7? Sorry if its a stupid question, im new to the whole treble/ab devices scene, and after the last rom i used, stock android is very lacking in features (came to the g7 power from sony xzp, existenz rom, non treble, a-only).

MIUI GSI from Erfan's ports works bro

CurbThePain said:
Disclaimer:
Only use TWRP for zips and Fastboot for images as TWRP isn't 100% stable yet. This would be my recommendation to anyone else looking to mess around with treble and custom roms. That is unless you know what you're doing. Also I am NOT responsible for any dead or bricked devices.
This threads purpose is for testing and documenting working treble roms for our Moto G7.
Roms that work:
Havoc OS
Roms that DON'T work:
All of Erfan's GSI Ports
Resurrection Remix
Q Developer Preview
Pixel Experience
Prerequisites:
Bootloader must be unlocked
ADB must be installed on a working PC
TWRP installed or able to boot from Fastboot
How to install:
Reboot to bootloader
Install boot.img in fastboot (Linked HERE)
Install the rom.img of your choice in fastboot (Rom must be ARM64 AB also make sure to flash system with the command "fastboot flash system -u your_image.img"))
Wipe userdata in fastboot
Reboot to TWRP and tap wipe, advanced wipe, system, then repair or change file system, then resize file system
Install Magisk (optional) and OpenGapps (also optional but recommended) in TWRP
Reboot and enjoy
PSA - If anyone finds any other working roms please report it on this thread and I will test the rom and update the thread accordingly.
Click to expand...
Click to collapse
I've gotten MIUI, PixelDust, and Q all to boot. Will be getting back to everyone once I have all the screens organized and might start making threads. Also working on LoS still, just been busy with irl/

thaunknownartist said:
I've gotten MIUI, PixelDust, and Q all to boot. Will be getting back to everyone once I have all the screens organized and might start making threads. Also working on LoS still, just been busy with irl/
Click to expand...
Click to collapse
Any issues with getting the GSI builds to run? All flashed through fastboot correct?
---------- Post added at 06:32 PM ---------- Previous post was at 06:31 PM ----------
thaunknownartist said:
I've gotten MIUI, PixelDust, and Q all to boot. Will be getting back to everyone once I have all the screens organized and might start making threads. Also working on LoS still, just been busy with irl/
Click to expand...
Click to collapse
Was going to attempt a RR install to my G7. Just making sure iylt was as straightforward as it should be.

BlissRoms/LineageOS/Paranoid Android/Dirty Unicorns/MIUI(?)/Bootleggers Rom/Viper OS/PixelDust
GSI left over

Was unable to get Resurection remix or MSM xtended to boot. RR gets stuck at boot animation. phh's trebble runs ofc.

GamingHero said:
BlissRoms/LineageOS/Paranoid Android/Dirty Unicorns/MIUI(?)/Bootleggers Rom/Viper OS/PixelDust
GSI left over
Click to expand...
Click to collapse
how successful were you with bliss roms. I got it to install but then after first boot the systemui stops working and is no longer functional

Druadach said:
how successful were you with bliss roms. I got it to install but then after first boot the systemui stops working and is no longer functional
Click to expand...
Click to collapse
I am with the Stock ROM of the motorola g7, waiting for the warranty to finish

CurbThePain said:
Disclaimer:
Only use TWRP for zips and Fastboot for images as TWRP isn't 100% stable yet. This would be my recommendation to anyone else looking to mess around with treble and custom roms. That is unless you know what you're doing. Also I am NOT responsible for any dead or bricked devices.
This threads purpose is for testing and documenting working treble roms for our Moto G7.
Roms that work:
Havoc OS
Roms that DON'T work:
All of Erfan's GSI Ports
Resurrection Remix
Q Developer Preview
Pixel Experience
Prerequisites:
Bootloader must be unlocked
ADB must be installed on a working PC
TWRP installed or able to boot from Fastboot
How to install:
Reboot to bootloader
Install boot.img in fastboot (Linked HERE)
Install the rom.img of your choice in fastboot (Rom must be ARM64 AB also make sure to flash system with the command "fastboot flash system -u your_image.img"))
Wipe userdata in fastboot
Reboot to TWRP and tap wipe, advanced wipe, system, then repair or change file system, then resize file system
Install Magisk (optional) and OpenGapps (also optional but recommended) in TWRP
Reboot and enjoy
PSA - If anyone finds any other working roms please report it on this thread and I will test the rom and update the thread accordingly.
Click to expand...
Click to collapse
Can somebody tell me the steps to install it? I didn't understand at all.

OrangeFox R10.1 recovery for Infinix Hot S 3

OrangeFox Recovery-R10.1 Unofficial
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Device information
Device: Infinix Hot S 3 X573
Firmware version: X573-QL1668DEF-O-191126V57
Android version: 8.0
Bootloader Status: Locked
OrangeFox Recovery Features
1. Supports Treble and non-Treble ROMs
2. Up-to-date Oreo kernel, built from sources
3. Increased compatibility with TWRP
4. Updated with latest TWRP commits
5. Built-in support for installing init.d functionality
6. Built-in support for installing Magisk
7. Built-in support for installing SuperSU
(v2.82-201705271822 - non-Treble Treble ROMs only)
8. AromaFM
9. White Flashlight
10.Password, torch, led
11. Support for Miui and Custom ROMs
12. MIUI OTA support
13.Better language support
14.ptimized versions of community scripts
15. Alternative lockscreen
16.Fox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
And many more!
Installation
- Flash with Twrp recovery
- Reboot to recovery
- Enjoy
Changes made
Because of X573 bootloader locked.
- Bootsigner addon added to recovery
- Splash theme is disabled
Bugs
1. Recovery Flashlight not working
2. OTA update not work
Note
1. Mount system and vendor manually from fox recovery before applying Sign Boot addon
2. init.d addon patches boot image therefore apply sign Boot addon to sign boot image after install init.d addon
Source:
- Ported from both land and dipper devices
Link
- https://www.androidfilehost.com/?fid=4349826312261825454
Credit
-OrangeFox Team
-TWRP Team
-Maintainers for land and dipper devices (many thanks)
-Adasi_Kaakyire
Thanks to all testers.

link is broken

Please Make Recovery of Infinix Hot 10 (x682)

Dhanuawatade said:
link is broken
Click to expand...
Click to collapse
Link updated enjoy

Skyhuppa said:
Link updated enjoy
Click to expand...
Click to collapse
Thank You For Making..
Is it possible to Install it without TWRP? i mean using Laptop/Fastboot Mode.
Also Possible to Install GSI ROM on locked bootloader by orangefox
thanks

Amm.
Its help me to install any GSI ROM like havoc os? in locked bootloader
Thanks

akshay130301 said:
Thank You For Making..
Is it possible to Install it without TWRP? i mean using Laptop/Fastboot Mode.
Also Possible to Install GSI ROM on locked bootloader by orangefox
thanks
Click to expand...
Click to collapse
Yes, you can install it with pc using any supported tool but fastboot is not possible.
There hasn't been a way to unlock the bootloader. The only way we can enjoy any tweak is what we have achieved, that is root and customize recovery.

My Firmware is X573-QL1668DEF-O-191126V50
1. Is it possible to flash this Recovery without EDL Mode.
Due to Locked Bootloader We can't able to Any ROM that's weird
Any way to Unlock it?

rs130301 said:
Amm.
Its help me to install any GSI ROM like havoc os? in locked bootloader
Thanks
Click to expand...
Click to collapse
Currently I have been able to patch the stock rom which can be flash through customize recovery like Twrp and the rest in locked bootloader state. But no hope yet for gsi or custom rom.

akshay130301 said:
My Firmware is X573-QL1668DEF-O-191126V50
1. Is it possible to flash this Recovery without EDL Mode.
Due to Locked Bootloader We can't able to Any ROM that's weird
Any way to Unlock it?
Click to expand...
Click to collapse
Yes, is possible but first backup your current firmware before trying any thing.
I have created stock rom in zip format which can be flashed with Twrp, PitchBlack and Orangefox recoveries in locked bootloader state. But custom rom can't boot.

Thank You For Support
Actually i am using this phone from 3 Years and no one Supported this phone much.
I really like your support & thank you and your team...
1. Can you tell which software i use for backup stock rom (in .zip mode)
2. Also suggest which software i use to flash Orange Fox ( not in edl mode )
But i need to be in fastboot while flashing recovery.
Let me know actually am new here but understanding
Thanks

rs130301 said:
Amm.
Its help me to install any GSI ROM like havoc os? in locked bootloader
Thanks
Click to expand...
Click to collapse
Last Question..
Am using this firmware X573-QL1668DEF-O-191126V50
U recently replied for backup..
Also tell us which software we use for backup and how i flash it without edl
Becoz opening panel is giving issue and fear of bricks
Please let know

Bilal nawaz said:
Please Make Recovery of Infinix Hot 10 (x682)
Click to expand...
Click to collapse
@Skyhuppa Please make recovery for Infinix Hot 10 (x682c)

[ROM][NAIRO][11][UNOFFICIAL][GAPPS] ArrowOS

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ArrowOS
ArrowOS is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate to us
Blog: blog.arrowos.net
WHAT WORKS?
Almost everything
WHAT DOESN'T WORK?
You tell me
Be sure to include a log : via the Matlog app included or check how to
DOWNLOADS
Here!
INSTALLATION
Unlocked Bootloader Required: google "unlock motorola bootloader"
Download the ArrowOS zip and copy to your external sd card
Download/Install firmware with the latest version of Moto Flash Tool
(this tool also prepares the b slot for custom rom installation)
Boot to the start/welcome screen
Power off and reboot to the bootloader/fastboot interface (power and volume down)
Install TWRP to slot a and slot b
Code:
fastboot flash recovery TWRP.img
fastboot flash recovery_b TWRP.img
Boot to TWRP (navigate with the volume buttons, select recovery, press power)
FORMAT DATA!!
Flash the ArrowOS zip
REBOOT TO RECOVERY!!
Reboot to system
Profit
*** Dont install Magisk until you have booted the ROM once
ROM Source: https://github.com/ArrowOS
Kernel Source: Stock Motorola Kernel
Device Source(s): https://github.com/omnirom/android_device_motorola_nairo
https://github.com/omnirom/android_device_motorola_dynamic_common
https://github.com/omnirom/android_device_motorola_sm7250_common
Vendor Source: https://github.com/DonkeyCoyote/proprietary_vendor_motorola
Many thanks to @vache for the above device/vendor trees, the flash tool, and building TWRP. The guy's a legend!

Reserved

Just in case..

Thank you to the developer! Finally someone showing the Nairo some love.
Definitely going to test this one…. !

There is also Omni-Rom available on telegram, built by vache, the twrp/device tree builder.
If you search moto g 5g plus official you should find the group.

I followed all steps but the rom won't flash error

Any advice ?

Love this ROM right from day 1!
Vache, will you add it to the ArrowOS website?
Will it have updates?
What about OTA, how can we enable it since TWRP does not allow so.
- Moto camera complain about updates
- As you know, Hey Google does not work
Thanks a lot
Wajdy

wajdyz said:
Love this ROM right from day 1!
Vache, will you add it to the ArrowOS website?
Will it have updates?
What about OTA, how can we enable it since TWRP does not allow so.
- Moto camera complain about updates
- As you know, Hey Google does not work
Thanks a lot
WajdyView attachment 5268655
Click to expand...
Click to collapse
Hey man, yeah there will be updates, more than likely monthly when the new security patch comes out, sooner if there's new features released. As for OTA updates, it won't happen as long as the builds are unofficial. But updating is no problem, just download and flash the update in twrp and reboot

Start of something big? I hope so

fawazed said:
Any advice ?
Click to expand...
Click to collapse
Were you able to resolve?

Got it to install. The essential part for me is -
Download/Install firmware with the latest version of Moto Flash Tool
After that flashing works like a charm. I will post more updates shortly.
Edit: Boot to system failed :-( with unable to open loop device. I tried it multiple times, all the steps from the start, but unfortunately same error. Does it matter if flash the Android 10 or 11?
I will attempt if I get the same error with omnirom.

peacemaker885 said:
Got it to install. The essential part for me is -
Download/Install firmware with the latest version of Moto Flash Tool
After that flashing works like a charm. I will post more updates shortly.
Edit: Boot to system failed :-( with unable to open loop device. I tried it multiple times, all the steps from the start, but unfortunately same error. Does it matter if flash the Android 10 or 11?
I will attempt if I get the same error with omnirom.
Click to expand...
Click to collapse
are you definitely rebooting to recovery after flashing the zip?
and are you formatting data, not just wiping?

Beetle84 said:
are you definitely rebooting to recovery after flashing the zip?
and are you formatting data, not just wiping?
Click to expand...
Click to collapse
Thanks so much for following up. I realized that when I was using the Moto Flash Tool, I was ending it too early. I rebooted the phone after the first "completed" and missed the second phase where it prepares slot b. I truly appreciate your efforts and now running ArrowOS on the Moto G 5G Plus. Thanks so much!

Nice rom do I got brightness issues do I need a logcat for that I will get it later today

wesleyvanneck12345678 said:
Nice rom do I got brightness issues do I need a logcat for that I will get it later today
Click to expand...
Click to collapse
Hey mate, what is the issue exactly?

Hey o.p hope all is well,.
Will this rom work on the 5GAce Kiev version.?

jhjhjhjhjhjh said:
Hey o.p hope all is well,.
Will this rom work on the 5GAce Kiev version.?
Click to expand...
Click to collapse
No I wouldn't think so, but you guys should have something soon, I'm pretty sure one of the LOS devs for g7 power, among other devices, has your phone

Any update of this rom maby the latest security patch

Yeah mate, sorry. Been busy at the moment. The April patch was done a while ago, I forgot to update the OP. I will have it fixed by the end of the day. Then expect the May one in a week or so

[ROM][12.1][LIBER][OFFICIAL] Evolution X [17/08/2022]

Evolution X 6.6 for the Motorola One Fusion+ [liber]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!
- Team Evolution X -
@joeyhuab (Founder/Lead Developer)
@peaktogoo (Project Manager/Co-Founder)
@AnierinB (Project Specialist/Co-Founder)
Reach us on Twitter! @EvolutionXROM
Check out our website!
Just flash and check "The Evolver". We have tons of features combined together from different ROMs.
Dual Volte wont work (Any one slot supports Volte)
DO NOT FLASH GAPPS, ALREADY INCLUDED
First Time Install / Clean Flash
1. Make sure you have stock recovery
2. Go to fastboot (bootloader)
3.Download the tool included so as to install the rom much easier
4.Unzip the tool and read the instructions
5.Follow it properly
6.It will Reboot to System and #KeepEvolving
Update / Dirty Flash
1. Same procedure as above, use the dirty flash bat file instead
KEEP IN MIND THERE IS ALSO OTA UPDATES!

Android version: 12.1.0_r12
Security patch level: August 2022
Build author: Manidweep
Kernel Source: https://github.com/sm6150-liber/kernel_motorola_sm6150
ROM Developer: joeyhuab
Source code: https://github.com/Evolution-X

Do banking apps work without magisk ?

Version without gapps? Thanks

Sid_DiCaprio said:
Do banking apps work without magisk ?
Click to expand...
Click to collapse
yes

Is this compatible with the XT2067-2 variant?

Fp not working

System update - veryfication failed over ota. Installs via fastboot but phone do not show when somone calls only ringtone plays but nothing on the screen. New version broken?

Sid_DiCaprio said:
Do banking apps work without magisk ?
Click to expand...
Click to collapse
Yes

After using all available rom for motorola one fusion plus I can say that this rom is more stable and can use as daily driver.
Everything working fine.. Only one problem is widevine decrease to l3... And i think its bacoz of bootloader unlock.
Banking app and UPI aap working fine.. Without magisk.. Root.
But i root my device and by just hide root all app works fine.. Bt in new canary update of magisk which remove many features....ie magisk hide. And module section.. Now cts failed with root.. But u can fix by enabling zygisk and it will work fine..
Only sbi yono don't work with root... Bt yono lite is working fine..
All thanks to developers.

I really liked the ROM, but unfortunately the fingerprint doesn't work on it, I don't know if I did something wrong when installing the ROM, but anyway... I had to go back to Stock ROM, I will wait the factory att to Android 11, is better...

Fingerprint doesnt work for me, and heating a little

Fingerprint not working for me either

jirka108 said:
Version without gapps? Thanks
Click to expand...
Click to collapse
not possible
evox comes with gapps default
there is no vanilla

mschwemberger11 said:
Fingerprint not working for me either
Click to expand...
Click to collapse
use latest
fixed

I followed all the instructions precisely but it failed, stuck at bootloader, I got many errors during flashing, don't know how to fix it now

Marian_Popescu said:
I followed all the instructions precisely but it failed, stuck at bootloader, I got many errors during flashing, don't know how to fix it now
Click to expand...
Click to collapse
I too faced the same issue. In bootloader mode ROM got flashed but with errors. Then it go to Fastbootd and system keeps showing waiting for device. It got struck. I then had to flash stock ROM via lmsa to proceed.
EDIT : This was happening because drivers were not updated on my PC running Win 11. For that I had to connect my phone in bootloader mode to PC. Just went to optional updates. There I installed 2 optional updates one named Qualcomm and the another one named Android ADB, Try again your phone will boot up in this Custom ROM

Gill Android said:
I too faced the same issue. In bootloader mode ROM got flashed but with errors. Then it go to Fastbootd and system keeps showing waiting for device. It got struck. I then had to flash stock ROM via lmsa to proceed.
EDIT : This was happening because drivers were not updated on my PC running Win 11. For that I had to connect my phone in bootloader mode to PC. Just went to optional updates. There I installed 2 optional updates one named Qualcomm and the another one named Android ADB, Try again your phone will boot up in this Custom ROM
Click to expand...
Click to collapse
thank you very much for this tip, much appreciated, the usb drivers were the culprit indeed
problem solved now, thanks!

Hey ich habe mir verschiedene Roms runtergeladen es fehlt immer die Datei payload.bin
mache ich was falsch?
soll fehlt heißen!
Mod translation via GT:
Hey, I've downloaded different ROMs and the payload.bin file is always missing
am I doing something wrong?
should mean missing!

I have a XT2067-3 (running Stock Android 11 - RPIS31.Q2-42-25-1) and have never installed a Custom ROM on it or rooted this device before. I followed Motorola's website instructions to unlock the bootloader using the key provided by them via email.
After that, I successfully flashed the ROM (after a few errors, I had to install the Google USB drivers as well, apart from the Motorola Drivers). When the phone rebooted into fastbootd, my Windows (10) would not recognize the phone. Installing the Google USB drivers through Device Manager worked immediately, incase anyone else runs into this error.
My main question is, can I flash a Custom Recovery (like TWRP) after flashing this ROM?

advaithk said:
I have a XT2067-3 (running Stock Android 11 - RPIS31.Q2-42-25-1) and have never installed a Custom ROM on it or rooted this device before. I followed Motorola's website instructions to unlock the bootloader using the key provided by them via email.
After that, I successfully flashed the ROM (after a few errors, I had to install the Google USB drivers as well, apart from the Motorola Drivers). When the phone rebooted into fastbootd, my Windows (10) would not recognize the phone. Installing the Google USB drivers through Device Manager worked immediately, incase anyone else runs into this error.
My main question is, can I flash a Custom Recovery (like TWRP) after flashing this ROM?
Click to expand...
Click to collapse
I flashed twrp and it's not working ..... The ota updates are not installing as well ( I guess ota updates require a recovery )
I did install another recovery and it's still not working so I manually flashed the update .....

Phone stopped booting after flashed 2 custom rom.

Hi guys
I have an oppo r7sf has 1.5ghz Qualcomm 4gb ram.
I flashed project spectrum first, then installed linage os android 9 and mokee os android 9 also.
Both of them wifi didn't work.
I already asked for that here My old post
Then i flashed lower version of android then NONE of them boot up.
I guaranteed that i installed with the same strategy.
Format data, dalvik, cache and system partion at the advanced wipe section.
Next get the rom and installed both rom, root and gapps.
It just hang in logo for 10s and shut down.
Your browser is not able to display this video.
Now even linage os 9 that i flashed before also not booting.
I even not to install either root or gapps or both but the same result
The only custom os i can boot is project spectrum (flashed again XD)
I am thinking of the recovery of this phone.
I flashed almost all version of twrp but only a *third party* one ran.
Link to the post itself The post
Intrestingly, he has almost the same problem as my phone: error 7, all version has dtb error- happened to all *genuine *twrp
Link to recovery that they uploaded: Third party twrp that worked
I also heard that most oppo phones, new or old are not easy to installed custom rom, and if it did, most essential things will not work with full of bugs.
I think i give up on this phone now. It will be put into my S21 ultra 5G box. I will bury it right after my dead dog's location within a week.
I have prepared, you must be fast!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

wikiepeidia said:
Hi guys
I have an oppo r7sf has 1.5ghz Qualcomm 4gb ram.
I flashed project spectrum first, then installed linage os android 9 and mokee os android 9 also.
Both of them wifi didn't work.
I already asked for that here My old post
Then i flashed lower version of android then NONE of them boot up.
I guaranteed that i installed with the same strategy.
Format data, dalvik, cache and system partion at the advanced wipe section.
Next get the rom and installed both rom, root and gapps.
It just hang in logo for 10s and shut down.
Now even linage os 9 that i flashed also not booting.
The only thing i can boot is project spectrum (flashed again XD)
I am thinking of the recovery of this phone.
I flashed almost all version of twrp but only a *third party* one ran.
Link to the post itself The post
Intrestingly, he has almost the same problem as my phone: error 7, all version has dtb error- happened to all *genuine *twrp
Link to recovery that they uploaded: Third party twrp that worked
Click to expand...
Click to collapse
Oh now i see why the rom didnt work, the rom and twrp i provided you was only for r7 plus
ill try finding twrp and a rom for your phone, ill let you know if i find anything

DieFault said:
Oh now i see why the rom didnt work, the rom and twrp i provided you was only for r7 plus
ill try finding twrp and a rom for your phone, ill let you know if i find anything
Click to expand...
Click to collapse
Download TWRP for r7sf
Download TWRP Open Recovery for r7sf
dl.twrp.me
Download TWRP for r7sf
Download TWRP Open Recovery for r7sf
eu.dl.twrp.me
also, where did you get lineageOS previously? i cannot find a download link for it anywhere!

Ok thank you but hurry up before i bury it!!

DieFault said:
Download TWRP for r7sf
Download TWRP Open Recovery for r7sf
dl.twrp.me
Download TWRP for r7sf
Download TWRP Open Recovery for r7sf
eu.dl.twrp.me
also, where did you get lineageOS previously? i cannot find a download link for it anywhere!
Click to expand...
Click to collapse
Oh here in this page: I even follow instruction here!

wikiepeidia said:
Oh here in this page: I even follow instruction here!
Click to expand...
Click to collapse
there is no old lineage os over there... ill let you know if i find another rom.
for now to revive your phone you can flash the new twrp i gave you and install stock r7sf rom onto it

Database Info

welcome