I have bought two 20mm stainless steel watch bands for my 46mm Watch 4 Classic, neither have fit, wondering if we need a 19mm. Bought a Fullmoso and Acestar, both same result. I also bought a 20mm silicone sport band which fits fine. Anyone find a 20mm stainless steel band that actually fits?
I have a couple of leather straps I bought recently and both 20mm 1 is Fullmoso . I have a 20mm stainless steel I bought 3/4 yrs ago and that fits my 46mm Classic .
Might worth popping in a jewelers if any local and checking some of there straps(you don't have to buy)
Same for me as well, I brought a 20mm stainless steel watch band and it wouldn't fit to begin with, but managed to get it to fit in the end by filling both ends down on the band.
Yikes, didn't want to go that route, did another 20mm that said specifically for Watch 4, Acestar, same issue, then ordered a 19mm Fullmoso, too narrow and too much play....waiting for more to hit the market
Here's the problem... It's not 20mm
Measured with calipers and it's 19.8mm
Is the watch lugs being less than 20mm a wider issue? I don't have calipers to measure.
It would suck if I can't use all the bands I have ordered.
I ended up just taking a Dremel to two 20mm steel bands I had bought for my 46mm classic. I shaved just a hair off each side where the pin goes on the bands and they fit fine after that. It really is a tenth of a mm off or something like the OP showed.
Picked this one up from Amazon and it worked perfectly.
SPGUARD Galaxy Watch 4 Band 40mm/44mm Classic 42mm/46mm 20mm Metal Stainless Steel Bands Compatible with Samsung Galaxy Watch4 40mm/44mm Classic 42mm/46mm for Men Women(Black)
reutermuerte said:
Here's the problem... It's not 20mm
Measured with calipers and it's 19.8mm
Click to expand...
Click to collapse
Indeed! The first problem is that the lugs are curved inward. So the distance between the holes exactly 20mm. HOWEVER, the distance between the lugs at the narrowest point is 19.8 to 19.9mm (like you, I just measured with calipers and it is hard to get an exact reading on something slanting inward). OMG Samsung, what a stupid move. So this could cause a bit of bind if the band is really close to being 20mm wide.
The second problem people seem to have with metal bands is that the band can actually rub against and scratch the circular case, depending on how "thick" the band is.
The third problem is that some people want a more finished look to the band to fill the "gap." To illustrate what I mean, attached is a photo of my most-excellent Casio WaveCeptor. Notice how it connects to the watch body completely.
For all these reasons, I did some searching and found a new and unique metal band for the GW4C- one that fills that gap by design. Nothing like it on Amazon, but on Ebay, there is this:
Stainless Steel Band Strap Belt For Samsung Galaxy Watch 4 Classic 40/42/44/46mm | eBay
Find many great new & used options and get the best deals for Stainless Steel Band Strap Belt For Samsung Galaxy Watch 4 Classic 40/42/44/46mm at the best online prices at eBay! Free shipping for many products!
www.ebay.com
Stainless Steel Band Strap Belt For Samsung Galaxy Watch 4 Classic 40/42/44/46mmSeller information: warehouse_us
Plus it is CHEAP at only $10.99 with free shipping. Seems a bit risky and too good to be true, especially since the price changed from $6.99 to $10.99 since yesterday, but I ordered it. I will post back my experience with it when it arrives next weekend...
crxssi said:
Indeed! The first problem is that the lugs are curved inward. So the distance between the holes exactly 20mm. HOWEVER, the distance between the lugs at the narrowest point is 19.8 to 19.9mm (like you, I just measured with calipers and it is hard to get an exact reading on something slanting inward). OMG Samsung, what a stupid move. So this could cause a bit of bind if the band is really close to being 20mm wide.
The second problem people seem to have with metal bands is that the band can actually rub against and scratch the circular case, depending on how "thick" the band is.
The third problem is that some people want a more finished look to the band to fill the "gap." To illustrate what I mean, attached is a photo of my most-excellent Casio WaveCeptor. Notice how it connects to the watch body completely.
For all these reasons, I did some searching and found a new and unique metal band for the GW4C- one that fills that gap by design. Nothing like it on Amazon, but on Ebay, there is this:
Stainless Steel Band Strap Belt For Samsung Galaxy Watch 4 Classic 40/42/44/46mm | eBay
Find many great new & used options and get the best deals for Stainless Steel Band Strap Belt For Samsung Galaxy Watch 4 Classic 40/42/44/46mm at the best online prices at eBay! Free shipping for many products!
www.ebay.com
Stainless Steel Band Strap Belt For Samsung Galaxy Watch 4 Classic 40/42/44/46mmSeller information: warehouse_us
Plus it is CHEAP at only $10.99 with free shipping. Seems a bit risky and too good to be true, especially since the price changed from $6.99 to $10.99 since yesterday, but I ordered it. I will post back my experience with it when it arrives next weekend...
Click to expand...
Click to collapse
Do you have picture of this band installed on your GW4 you could share?
SirDigitalKnight said:
Do you have picture of this band installed on your GW4 you could share?
Click to expand...
Click to collapse
crxssi said:
Seems a bit risky and too good to be true, especially since the price changed from $6.99 to $10.99 since yesterday, but I ordered it. I will post back my experience with it when it arrives next weekend...
Click to expand...
Click to collapse
Thanks, I missed that part with my very old and tired eyes! Look forward to see how it comes out!
anyone have the exact measurement of the watch. i see a band that is 185mm(7.28 in) so with the watch length would it fit an 8" wrist? Is the watch at least 1 in long?
cmccarter said:
anyone have the exact measurement of the watch.
Click to expand...
Click to collapse
From pin location on top to pin location on the bottom seems to be exactly 5cm.
I bought these (mine are all black, but dont seem to be listed anymore) and they do fit: https://www.amazon.com/dp/B09BVPWFZS
They were a little bit of a pain to get on as you cant have the band straight out from the plane of the watch while inserting the pins. You have to let the band lay like it will when its on your wrist, then they fit. This made it much harder than need be while doing the second pin as you dont get nearly as much play.
I tried a few others and all had the same issue of being too large and hitting the watch chassis.
Anyone get a stainless steel band to fit yet?
Using this modded Aliexpress Rolex replica. The end links are not solid so are easy to bend to fit. There are plenty of non branded ones to that should fit.
spangelaregreat said:
Using this modded Aliexpress Rolex replica. The end links are not solid so are easy to bend to fit. There are plenty of non branded ones to that should fit.
Click to expand...
Click to collapse
Share link pls
Danny17va said:
Share link pls
Click to expand...
Click to collapse
Here you go.
https://www.aliexpress.com/item/4000871651760.html?spm=a2g0s.9042311.0.0.30fd4c4dfKZzHi
i have the ultimate band for my watch 4 classic...bought it on aliexpress...fits perfectly with no gaps AND has 20mm connectors and 22mm band...is much beefier than the tiny 20mm bands...
https://nl.aliexpress.com/item/1005003229958698.html?spm=2114.13010708.0.0.11c94c4dhIq96y
Related
Who agrees? Who dosent? With a nice fossil leather band for 10 bucks. Better or worse than pebble steel? I think better. Pebble steel has more bezil on bottom side, looks tacky. Anyone but a metal band for sw2?
Its hard to compare. I think it depends of bend. I purchase sony branded leather bend and its look even worse then rubber one for me...
I got a black leather one which made it look good, but a little too professional. Then I got a beige nylon strap which looks really good. I'd recommend nylon.
Sent from my LT30p using Tapatalk
Agreed, I bought a cheap brown leather strap for mine on ebay and it looks great, definitely prefer it to the rubber strap that came with the watch. I might try a metal strap next
.
Fossil bands are 5$ at fossil outlet. Everyone post pics of custom watchbands on ur sw2. Shining I love pics of sw2 with 3rd party bands!
I'm all about the NATO straps on mine.
Does anyone have the brazil watchband or know of a site that sells the band seperately? I can't seem to find any.
Many thanks for any advice!
The "Brazil Watch Band" is part of the 'Sony Smartwatch 2 FIFA Edition' and isn't sold separately.
It is so much better than that. Go to the Sony website and look at the photos of the other fabric bands, in different colours. Not only do Sony not sell those separately, they don't sell them at all, not even in Japan. How cool is that?
I have brought the Fifa edition today and it also comes with a black strap
beautiful
playst said:
I have brought the Fifa edition today and it also comes with a black strap
beautiful
Click to expand...
Click to collapse
Yeah, but its not fabric, it comes with the standard black silicone one.
But it means after its over he can switch back...
Sent from my GT-I9300
It won't be exactly the FIFA nato, but howsabout just getting a green and yellow striped Nato strap? Seems those are easy to find....
Nomad1600 said:
It won't be exactly the FIFA nato, but howsabout just getting a green and yellow striped Nato strap? Seems those are easy to find....
Click to expand...
Click to collapse
Can't find 24mm wide NATO strap that is thin enough to fit between the watch and the spring bar. Anything thicker than about 1.2mm won't fit. Have only been able to find 22mm wide NATO strap and it doesn't fit properly with a gap on either side showing silver spring bar. Bought 3 straps so far and I am not happy with the fit of any of them. Be careful with thicker fabric NATO straps as they are stronger than the spring bars Sony supply and will bend/break them is forced.
Its the only thing I am really disappointed about with the SW2. Sony should have left a bigger gap between the watch body and the spring bars OR actually made the fabric straps they advertise on their website available to us mere mortals.
gandalf_grey91 said:
Can't find 24mm wide NATO strap that is thin enough to fit between the watch and the spring bar. Anything thicker than about 1.2mm won't fit. Have only been able to find 22mm wide NATO strap and it doesn't fit properly with a gap on either side showing silver spring bar. Bought 3 straps so far and I am not happy with the fit of any of them. Be careful with thicker fabric NATO straps as they are stronger than the spring bars Sony supply and will bend/break them is forced.
Its the only thing I am really disappointed about with the SW2. Sony should have left a bigger gap between the watch body and the spring bars OR actually made the fabric straps they advertise on their website available to us mere mortals.
Click to expand...
Click to collapse
Have you tried place nato strap before set spring bar? Instead of directly through this gap.
aseeme555076 said:
Have you tried place nato strap before set spring bar? Instead of directly through this gap.
Click to expand...
Click to collapse
Yes, I tried but I could only get one of the spring bars back in place with the thicker NATO strap. And it was bending pretty bad, I was worried it might break. Those Sony spring bars are seem pretty low quality.
Just got my new gear s2 classic, and I'm loving it! I was wondering if anyone knew if the original band that came with it was water proof and sweat resistant? I've heard that leather absorbs sweat and moisture quickly, which causes a funky smell. I'm not sure if the band that came with this watch falls into this category though, because the watch is waterproof, and I know they make waterproof leather bands. Let me know what your guys's experience was with this leather band and if you know what type of leather the watch band is made from. Is it good enough to use in the gym and sweat into, or should i invest in an actual silicon sports band?
The leather band is not waterproof. Probably want to pick up something else for the gym.
I ended up buying some colorful silicone straps that have quick release features that work well
shail222 said:
Just got my new gear s2 classic, and I'm loving it! I was wondering if anyone knew if the original band that came with it was water proof and sweat resistant? I've heard that leather absorbs sweat and moisture quickly, which causes a funky smell. I'm not sure if the band that came with this watch falls into this category though, because the watch is waterproof, and I know they make waterproof leather bands. Let me know what your guys's experience was with this leather band and if you know what type of leather the watch band is made from. Is it good enough to use in the gym and sweat into, or should i invest in an actual silicon sports band?
Click to expand...
Click to collapse
Yeah, the stock ones get stinky pretty fast
Does anyone know where to get a replacement strap fro the Huawei watch 2 classic ? I'm looking for one in stainless steel to match the colour of the grey classic
I think i got this one and it matches the color:
https://www.amazon.de/gp/product/B01N47BF9R/ref=oh_aui_detailpage_o02_s01?ie=UTF8&th=1
no review yet: just installed it, but seems fine ^^
Most of the ones I've been looking at have complaints of the finish not being very durable and scratching or wearing through to the silver base metal very quickly. So I started to research ceramic bands but many of those look too glossy black. Ceramic will be very durable against wearing through to another base color but can be very brittle. Some have complained the bands are brittle and can crack/break if you catch your wrist on something like a door frame as you walk by. Not all of the are quick release so that's another issue if you like to be able to change bands easily (as I do) . Pretty much anything 22mm that goes well with the Samsung Gear S3 Classic will work well with the HW2 classic. One thing I have read is that 22mm Milanese Loop Mesh bands will not always fit because of how far back the pin holes are in the HW2 classic.
This ceramic one (not quick release) actually has a review from an HW2 classic owner with pictures https://www.amazon.com/dp/B01M1DT36...olid=2W6Q0JM9LJ3OW&psc=1&ref_=lv_ov_lig_dp_it
Stainless but also not quick release https://www.amazon.com/dp/B072XGL7Z...olid=2W6Q0JM9LJ3OW&psc=1&ref_=lv_ov_lig_dp_it
adobeman said:
Stainless but also not quick release https://www.amazon.com/dp/B072XGL7Z...olid=2W6Q0JM9LJ3OW&psc=1&ref_=lv_ov_lig_dp_it
Click to expand...
Click to collapse
I ordered this on amazon a month ago to the day. I just looked at my band when I stumbled across your thread and see that I've got more than a dozen spots that have worn through to silver (they're all on the bottom far side of my wrist).
Smoke steel band
https://www.fossil.com/us/en/produc...5267!&ef_id=WyiK1wAAAcwbifds:20180829045353:s
This one comes close, but 60$ is restrictive price! Would love to get similar strap.
I bought this one in ceramic black 20mm. Looks like they're they might be out of stock now.
https://www.amazon.com/gp/aw/d/B07BSYYHKQ?psc=1&ref=yo_pop_mb_pd_title&th=1
https://www.amazon.co.uk/gp/product/B071GF1LWY/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Durable ceramic strap that looks great on watch2 classic
what size wrist will the standard leather band fit? I assume id is a range. i am thinking of gett a classic but want to be sure it will fit my wrist. my wrist is 8-8.25 inches around
The standard band is not leather - it's silicone. And it's a size large, so if it doesn't fit your wrist, you'll have to get an aftermarket band that does.
tnx for the reply. i did manage to find a local tmoble store that I could try on the watches. while the classic looks nice don't think its worth the extra bucks at this time. the standard strap will fit me so will start with that but think i will go with a ss mesh as a standard carry.