So I want to unlock my phone's bootloader to flash a custom ROM (I know how to), but whenever I open the unlock tool with the phone connected and in fastboot, it says phone not connected, any problem? I've been getting the 'invalid input' error before, I just uninstalled android stk to temporarily fix it, is that the problem? Or do I have to factory reset the phone?
It's running Android 9 MIUI 12.0.1 PEKMIXM
wassupDUDE said:
So I want to unlock my phone's bootloader to flash a custom ROM (I know how to), but whenever I open the unlock tool with the phone connected and in fastboot, it says phone not connected, any problem? I've been getting the 'invalid input' error before, I just uninstalled android stk to temporarily fix it, is that the problem? Or do I have to factory reset the phone?
It's running Android 9 MIUI 12.0.1 PEKMIXM
Click to expand...
Click to collapse
Well does your cable transfer data?
LR7875 said:
Well does your cable transfer data?
Click to expand...
Click to collapse
Absolutely. I con run ADB commands perfectly.
Did you try an older version of the unlock tool?
LR7875 said:
Did you try an older version of the unlock tool?
Click to expand...
Click to collapse
I tried the version that was released when the phone was released, but it didn't even have an option to unlock my phone, so I tried a third party app called XiaoMiTool V2, and it came so close to unlocking the phone, but it kept giving an error: Failed ADB connection.
Have you enabled both oem unlock and usb debugging in developer options? If you haven't do it now(the developer options are accessible from setting>about phone > all variables> click 7 times miui version and you can access that in settings>more settings)
LR7875 said:
Have you enabled both oem unlock and usb debugging in developer options? If you haven't do it now(the developer options are accessible from setting>about phone > all variables> click 7 times miui version and you can access that in settings>more settings)
Click to expand...
Click to collapse
If I didn't, how can I run ADB commands?? And yes, I did also turn on OEM unlocking, and associated Mi account with the device, though I did not wait the 7 days.
I have the same problem. I have waited more than 7 days actually. Any solution ? Thanks
Related
Hi
My phone is international NXT-L29
I was on Ephemeral B180 rom but i decided to upgrade it to get emui 4.1
I flashed back stock b180 rom, and after I flashed stock b321 rom
ROM works great but i would like to get root and twrp back again, but everytime I try to go through fastboot i get this screen on picture.
I logged into my dc unlocker again and followed the procedures (manufacture mode, unlocking,...) and dc unloccker tool informs that the phone was unlocked...but no, when I do adb reboot bootloader i still get the same message on the picture.
I saw other suggestions here on XDA, i confirm oem unlock is activated on developer options...i made factory reset and then "vol+- power" (with or without phone connected to PC) but i dont't get any option to unlock bootloader. I always arrive to a menu saying that the phone is looking for upgrade and tries until 5% is reached... (if I keep waiting it does not fisplat error message, only waits and waits and after a while it reboots normally (i don't have any dload folder either on phone or sd card)
Any suggestion to solve this is highly appreciated
many thanks
Try to get ur unlock code from huawei website maybe this can help.
Did you run the bootloader unlock command with your unlock code again?
Ephemera said:
Did you run the bootloader unlock command with your unlock code again?
Click to expand...
Click to collapse
the only command my phone accept is adb reboot bootloader
Then i get the screen of picture that I posted, which says that it is a cold reboot (?)
Whem I reach this point it doens not respond to anything else taht I type on Command line (I type fastboot oem unlock (and the code) but on pc screen i read 'ewaiting device' and nothing happens on phone
gm007 said:
Try to get ur unlock code from huawei website maybe this can help.
Click to expand...
Click to collapse
I retrived my code from DC Unlocker (it has an option to read bootload code) but the problem is thar when I get de Fastboot&Rescue Mode the phone does not react to any command i can type on PC
Can I replace the stock boot.img that comes inside the UPDATE.APP file byone decrypted boot image of same rom?
If that would be possible then flashing this "modified" UPDATE.APP would solve the problem?
Many Thanks
pasil.pt said:
I retrived my code from DC Unlocker (it has an option to read bootload code) but the problem is thar when I get de Fastboot&Rescue Mode the phone does not react to any command i can type on PC
Click to expand...
Click to collapse
Hi pasil.pt,
try to update the fastboot mode driver
http://forum.xda-developers.com/showpost.php?p=69382774&postcount=202
grofock said:
Hi pasil.pt,
try to update the fastboot mode driver
http://forum.xda-developers.com/showpost.php?p=69382774&postcount=202
Click to expand...
Click to collapse
I don't see any kedacom usb device folder...
Check if the device isnfound by the computer. Restart in fastboot mode then on your computer type "fastboot devices" you should get a device and its serial. If you're not getting anything its a driver issue.
Ephemera said:
Check if the device isnfound by the computer. Restart in fastboot mode then on your computer type "fastboot devices" you should get a device and its serial. If you're not getting anything its a driver issue.
Click to expand...
Click to collapse
I did not try the command fastboot devices, but as per the new picture attached when I run adb devices the computer finds my phone
the problem is, then, when next i run 'adb reboot bootloader'...the device goes into fastboot&rescue mode and the device is not recognized by computer anymore
pasil.pt said:
I did not try the command fastboot devices, but as per the new picture attached when I run adb devices the computer finds my phone
the problem is, then, when next i run 'adb reboot bootloader'...the device goes into fastboot&rescue mode and the device is not recognized by computer anymore
Click to expand...
Click to collapse
Open control panel when your phone is in this state (it's fastboot mode) and you should see the folder I talked about.
It seems drivers issue, i hate windows 10
Try different usb port,and try to remove the drivers and install them again.
Make sure no usb device connected to any other ports.
grofock said:
Open control panel when your phone is in this state (it's fastboot mode) and you should see the folder I talked about.
Click to expand...
Click to collapse
YES!!!!!!
many thanks to you. grofock, and to ephemera, and XDA
At last i got it done. (Huawei are so tricky compared to samsung...but at least they do not explode
gm007 said:
It seems drivers issue, i hate windows 10
Try different usb port,and try to remove the drivers and install them again.
Make sure no usb device connected to any other ports.
Click to expand...
Click to collapse
You were probably right because i recently changed PC and aeverytime w10 upgrades I pray...
Have the the same problem, but didn't find the solution. Try different laptops and different cables. Windows can't recognise my Mate 8 L29 after B320 update cause of the wrong descriptor.
timasan said:
Have the the same problem, but didn't find the solution. Try different laptops and different cables. Windows can't recognise my Mate 8 L29 after B320 update cause of the wrong descriptor.
Click to expand...
Click to collapse
try grofock's hints about control panel and Device manager on windows....
pasil.pt said:
try grofock's hints about control panel and Device manager on windows....
Click to expand...
Click to collapse
I try it on four different PCs and still error 43 "wrong descriptor".
timasan said:
I try it on four different PCs and still error 43 "wrong descriptor".
Click to expand...
Click to collapse
Maybe explain more what you did,what are you trying to do and which tools you used.
gm007 said:
Maybe explain more what you did,what are you trying to do and which tools you used.
Click to expand...
Click to collapse
I'm trying to install drivers for Mate 8. I did it on different PC with Win 10 and 7. With different cables. Try to change or delete drivers for USB hub and etc. In fastboot mode and normal with usb debug and w/o.
timasan said:
I'm trying to install drivers for Mate 8. I did it on different PC with Win 10 and 7. With different cables. Try to change or delete drivers for USB hub and etc. In fastboot mode and normal with usb debug and w/o.
Click to expand...
Click to collapse
Did you install hisuite it has all the drivers and make sure to enable allow hisuite to use hdb in phone settings under security.
Model: MAH-L09C432B156
EMU: 5.0
Android Ver: 7.0 NOT ROOTED!
No access to Devlepoer options for USB Debugging
Hi I have a Huawei Mate 9 which is FRP locked, I have gained the unlocking code from Huawei and have all relevent software and instructions to unlock Bootloader and remove the FRP protecton but I am really struggling with connecting the device in CMD with adb.
I have drivers installed and have allowed connections to phone with HiSuite on device and PC, I am unable to get into Developer settings due to FRP protection bur according to what I have seen in every walkthrough shows that this should not be a problem, even though I am unable to enabe USB debugging. Anyway I did have it connected once but have not been able to since so if anone can tell me where i might be going wrong I would be grateful.
After resetting phone and following instuctions via Huawei to prepare device I hold Vol- and plug in USB to Boot into Fastboot/Recovery mode.
Open CMD and execute Adb.exe in command, after that I enter command \adb devices which gets deamon running but showing no device.
I have tried going into what settings I am able to enter and enable USB in any way possible but still to no joy.
I have looked at posts on here but not found anything that seems to help as yet or I have just not looked in correct place.
Please can someone help as this is frustrating. Thanks Stew.
If you entered fastboot already try "fastboot devices" instead of adb
Did you go into about phone and tap the "build number" 7 times to enable developer options? If so you should be able to access and enable USB debugging
Sent from my MHA-AL00 using XDA-Developers Legacy app
" I have gained the unlocking code from Huawei "
please could you tell me how did you get that frp unlocking code from stupid Huawei?
they didn't answer my emails for one month now!
jr313 said:
Did you go into about phone and tap the "build number" 7 times to enable developer options? If so you should be able to access and enable USB debugging
Sent from my MHA-AL00 using XDA-Developers Legacy app
Click to expand...
Click to collapse
frp lock doesnt matter if you dont have oem unlock permission it wont help try using HWOTA with unlock code
i am in same boat since a month now and unable to bring the device back to life as i dont have usb debugging enabled and oem unlock permission and phone is bricked through huawei own official app and firmware
(26/09/21) Note.- This tool is primarily for realme 6Pro on RUI2.0, and is expected to work on it without issues. However deep-test apks sometimes work for other devices too... If it's working on yours then good, if not then there's nothing that can be done except find the correct one for your device [c.realme.com]. These tools have in-built checks and I have no idea which parameters it considers, if I had to guess I'd say a certain fw version requirement and the model of chipset. So if you have any device other than RMX2061/3 and this tool didn't work, I'm sorry.
If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.
Your warranty may now be void.Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*
Prerequisites:
ADB and Fastboot.
Deeptesting APK for A11.
Steps for Unlock:-
Backup your data.
Install deeptesting.apk.
Open the app and click start applying.
Wait for application to be summited and processed.
Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.
Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.
Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.
Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).
Use volume and power button to select unlock the bootloader.
Phone will format and reboot.
*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*
Thank you
key combinations for fastboot mode not working
dks4deepak said:
key combinations for fastboot mode not working
Click to expand...
Click to collapse
Use adb reboot-bootloader.
debdeep98 said:
Use adb reboot-bootloader.
Click to expand...
Click to collapse
when stuck at boot /recovery destroyed screen. there is no adb.
dks4deepak said:
when stuck at boot /recovery destroyed screen. there is no adb.
Click to expand...
Click to collapse
Locked on custom partitions?
Motherboard change is the only option now.
Good morning,
i tried this deep testing version on my realme 8 5g (android 11 UI 2.0),
but it doesn't work and the message comes out
"Failed to submit application. - This phone model does not support deep testing."
what can I do?
freder_ said:
Good morning,
i tried this deep testing version on my realme 8 5g (android 11 UI 2.0),
but it doesn't work and the message comes out
"Failed to submit application. - This phone model does not support deep testing."
what can I do?
Click to expand...
Click to collapse
Wait for realme to allow bl unlocks on 8 5G.
debdeep98 said:
If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.
Your warranty may now be void.Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*
Prerequisites:
ABD and Fastboot.
Deeptesting APK for A11.
Steps for Unlock:-
Backup your data.
Install deeptesting.apk.
Open the app and click start applying.
Wait for application to be summited and processed.
Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.
Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.
Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.
Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).
Use volume and power button to select unlock the bootloader.
Phone will format and reboot.
*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*
Click to expand...
Click to collapse
Deep testing apk you shared doesnt work on realmi 7i UI.2.0 Android 11
DeSmanAryPotter said:
Deep testing apk you shared doesnt work on realmi 7i UI.2.0 Android 11
Click to expand...
Click to collapse
Yeah it's for the 6Pro. When realme allows unlocks on 7i it'll work.
debdeep98 said:
If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.
Your warranty may now be void.Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*
Prerequisites:
ABD and Fastboot.
Deeptesting APK for A11.
Steps for Unlock:-
Backup your data.
Install deeptesting.apk.
Open the app and click start applying.
Wait for application to be summited and processed.
Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.
Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.
Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.
Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).
Use volume and power button to select unlock the bootloader.
Phone will format and reboot.
*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*
Click to expand...
Click to collapse
I can not install the app, how can I do?
Facux3 said:
I can not install the app, how can I do?
Click to expand...
Click to collapse
Device and Android version.
nice work
the adb folder is not opening , what to do ? im using windows 10
What do you mean? Access denied? Try downloading platform tools again.
p.pc said:
the adb folder is not opening , what to do ? im using windows 10
Click to expand...
Click to collapse
How about Realme X7 Pro?
lfnisme said:
How about Realme X7 Pro?
Click to expand...
Click to collapse
You can try. See if it works.
App not installed on realme X2 Pro
debdeep98 said:
If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.
Your warranty may now be void.Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*
Prerequisites:
ABD and Fastboot.
Deeptesting APK for A11.
Steps for Unlock:-
Backup your data.
Install deeptesting.apk.
Open the app and click start applying.
Wait for application to be summited and processed.
Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.
Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.
Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.
Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).
Use volume and power button to select unlock the bootloader.
Phone will format and reboot.
*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*
Click to expand...
Click to collapse
My device is realme x2 (Chinese rom). when I tried to install the deep testing app it says an app with same signature has already been installed . But I did not install that app never before. How can I do this?
My device is realme x2 (Chinese rom). when I tried to install the deep testing app it says an app with same signature has already been installed . But I did not install that app never before. How can I do this?
Hello. I'm an owner of a Xiaomi Redmi 9A and I have following rooting problems with it:
1. while beeing in phone's fastboot mode and after sending from the computer's terminal (after sucessfull connection):
"fastboot oem unlock"
the phone "thinks" for a short bit before restarting itself without doing anything
2. I have a Xiaomi account bound to the phone and when selecting the "check unlock state" the phone ask me to turn off wifi, enable the (paid) data transfer and bind the phone to the account
3. while using the official Xaiomi unlock tool (with was downloaded from the phone producer's website), the phone isn't even seen in it
Could anyone help me ?
Try installing usb drivers or the phone will never be detected.
VD171 said:
Try installing usb drivers or the phone . never be detected.
Click to expand...
Click to collapse
in case of adb and fastboot, I had used them on Linux.
Only the official unlocking tool was for Windows, on with the usb drivers were installed.
Linux detect it without any issue
Just use it to unlock on Linux:
XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone
XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!
xiaomitool.com
VD171 said:
Just use it to unlock on Linux:
XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone
XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!
xiaomitool.com
Click to expand...
Click to collapse
thanks, but it seem to don't work correctly with my phone.
After my phone had become detected when was in the fastboot mode and after clicking the "select" button in the app, the phone has rebooted to the normal mode and asked to scan again. It hasn't done anything except the mentioned above.
mcgiwer said:
thanks, but it seem to don't work correctly with my phone.
After my phone had become detected when was in the fastboot mode and after clicking the "select" button in the app, the phone has rebooted to the normal mode and asked to scan again. It hasn't done anything except the mentioned above.
Click to expand...
Click to collapse
Did you enable usb debugging on developer settings?
Did you allow the usb debugging for the actual computer?
VD171 said:
Did you enable usb debugging on developer settings?
Did you allow the usb debugging for the actual computer?
Click to expand...
Click to collapse
yes in both cases... I have even enabled the "oem unlock" option in the setting
Install windows on partition 30Gb, change cable
yaro666 said:
Install windows on partition 30Gb, change cable
Click to expand...
Click to collapse
The cable is new and I won't wipe my Linux to install a Windows (about with I have a bad opinion)
Make a dual boot, just resize partition, you need 30Gb and in 45min you will know what is the problem.
Or you can try to liveboot windows from usb stick.
yaro666 said:
Make a dual boot, just resize partition, you need 30Gb and in 45min you will know what is the problem.
Or you can try to liveboot windows from usb stick.
Click to expand...
Click to collapse
Question: Why do you push so much on me to install Windows?
This forum is dedicated to mobile phones and my topic is about anormal phone behaviour of a phone while attempt to root it. Wiping out a safe Linux and installing a Windows won't help at all....
I tryed to root the phone on friend's laptop with a Windows (with the latest drivers and software installed) and it didn't worked.
I suspect that the producer probably has fabrically instaled a damaged or improper firmware
As you wish. Windows is more device friendly. I just suggest to do it on W, nothing more.
You state that fastboot works, but Linux don't see your phone, like in case you don't have drivers for adb. We don't know if you installed everything on Linux properly
yaro666 said:
As you wish. Windows is more device friendly. I just suggest to do it on W, nothing more.
You state that fastboot works, but Linux don't see your phone, like in case you don't have drivers for adb. We don't know if you installed everything on Linux properly
Click to expand...
Click to collapse
hello. You had missread my post. I wrote that it isn't seen only in the unlock software. Fastboot and ADB detect it correctly
yes:
my desktop (cause im in bootloader mode i'll need to use it) is artix linux with kde. sadly i cant install on it adb/fastboot and other drivers due to lack of systemd and empty repos so will do it probably from a random linux-based bootable usb...
my mobile is (as was in title) - xiaomi redmi go - european version.
what means ? my mobile have encryption after removing system what makes me unable to boot things... for the now i can still boot stock ROM. although i wanted to remove all associations with google in system (all google apps, bugs caused by removal etc...)
any ideas what i should do with it? wanna have it to tomorrow cause we use our mobiles at work and my current mobile got "marked as over outdated" by boss so i cant use
why noone ?
This same things happen with me also but You need a USB cable to connect your phone to PC. You need to download ADB and Fastboot Tools to your PC and Extract it First of all, you need to enable the developer option and activate the USB debugging on Xiaomi Redmi Go. Now activate the OEM unlock status on your Xiaomi Redmi Go DinarGuru.com
Christinakim said:
This same things happen with me also but You need a USB cable to connect your phone to PC. You need to download ADB and Fastboot Tools to your PC and Extract it First of all, you need to enable the developer option and activate the USB debugging on Xiaomi Redmi Go. Now activate the OEM unlock status on your Xiaomi Redmi Go
Click to expand...
Click to collapse
this i actually know. i have one heavily modded lg so im not a newbie. its more about "encryption unsuccesful" broked roms leading to non-booting state (bootloop) etc... nothing from xda surely doesnt work, yep
surely nothing from : https://forum.xda-developers.com/m/techyminati.8245761/ works. was trying loads of times always bootloop. recovery posible to load but then tends to not make factory reset and lock in "encryption unusccesful", and thats worst... im in europe but have global version btw...
dead chat ?