How To Guide Proper way of installing TWRP - Samsung Galaxy A12

Disclaimer: I AM NOT RESPONSIBLE FOR ANY DEVICE OR SD CARD DAMAGE
Instruction:
1. Download the two files below
2. Make sure to unlock your bootloader first
3. Extract the TWRP zip file
4. Reboot your device to download mode
5. Then open odin and load twrp to AP slot then go to Options then unchecked the auto reboot
6. Do not unplug usb cable hold the <Power Button> + <Vol. Down> after black screen appears hold the <Vol. Up> + <Vol. Down> to enter Downlod Mode.
7. Then open odin again and load the vbmeta to AP slot go to Options then unchecked auto reboot
8. Remove usb cable then reboot your devices by pressing <Power Button> + <Vol. Down> then if black screen appears press the <Power Button> + <Vol. Up> until it reboots to TWRP
Special Thanks to
edward0181 for his TWRP
cyb3rx7 for the vbmeta

How do I flash a gsi?

James 144 said:
How do I flash a gsi?
Click to expand...
Click to collapse
still try out but failed

James 144 said:
How do I flash a gsi?
Click to expand...
Click to collapse
when i try to flash dot os gsi but i can't boot to dot os i don't know why

Jayke770 said:
when i try to flash dot os gsi but i can't boot to dot os i don't know why
Click to expand...
Click to collapse
That call : bootloop there some bypass or modified file idk where we can find it to get out of bootloop

What are the correct steps to test a gsi rom?

Jayke770 said:
when i try to flash dot os gsi but i can't boot to dot os i don't know why
Click to expand...
Click to collapse
Did you try an A or A/B ROM? This phone only supports A/B. If you use A/B, you have to disable DM_verity

i flash the A only

Jayke770 said:
when i try to flash dot os gsi but i can't boot to dot os i don't know why
Click to expand...
Click to collapse
cyb3rx7 said:
That call : bootloop there some bypass or modified file idk where we can find it to get out of bootloop
Click to expand...
Click to collapse
The bootloop is happending by the kernel. It is because this device uses dm-verfiy. so that means when swiping to allow system modifications you wount be able to boot to system if you are using the stock kernel.

LAST_krypton said:
The bootloop is happending by the kernel. It is because this device uses dm-verfiy. so that means when swiping to allow system modifications you wount be able to boot to system if you are using the stock kernel.
Click to expand...
Click to collapse
oh so you mean also we need custom kernel ?

cyb3rx7 said:
oh so you mean also we need custom kernel ?
Click to expand...
Click to collapse
If you are useing the method of flashing the vbmeta then twrp, yes. If you pre roted your phone and then installed twrp there is no need for a custom kernel.

in that case.. in some situation we cannot boot directly to system or twrp.. so we need the vbmeta to install the twrp but the system will gone

Jayke770 said:
in that case.. in some situation we cannot boot directly to system or twrp.. so we need the vbmeta to install the twrp but the system will gone
Click to expand...
Click to collapse
After flashing vbmeta system woun't be gone, after swipeing allow system modifications and if you haven't pre rooted your phone before that or installed a custom kernel, your device will be bootlooped.

LAST_krypton said:
After flashing vbmeta system woun't be gone, after swipeing allow system modifications and if you haven't pre rooted your phone before that or installed a custom kernel, your device will be bootlooped.
Click to expand...
Click to collapse
if ever and how?

LAST_krypton said:
If you are useing the method of flashing the vbmeta then twrp, yes. If you pre roted your phone and then installed twrp there is no need for a custom kernel.
Click to expand...
Click to collapse
i try it with root brfore still can't boot to os stack it bootloop

I managed to install twrp on the A125M, however when installing a gsi it gives me a mount error and the error -1

Related

Cant Flash Custom Recovery j710f

Hello everyone,ive issue about flashing custom recovery to my phone after i flash it to stock rom
Its android version is 8.1.0
Baseband version j710fxxu5brc3
Tnx
Lelouch? said:
Hello everyone,ive issue about flashing custom recovery to my phone after i flash it to stock rom
Its android version is 8.1.0
Baseband version j710fxxu5brc3
Tnx
Click to expand...
Click to collapse
you need to wipe the data partition after flashing it in twrp, then you can boot it
Also the error that im getting is recocery image check failed...sorry for late reply
michaeladige said:
you need to wipe the data partition after flashing it in twrp, then you can boot it
Click to expand...
Click to collapse
Do i have to do that at twrp recovery or at stock recovery?...sorry for noob question
Lelouch? said:
Do i have to do that at twrp recovery or at stock recovery?...sorry for noob question
Click to expand...
Click to collapse
twrp recovery
michaeladige said:
twrp recovery
Click to expand...
Click to collapse
Im still at stock recovery...how will i flash a twrp because when i flash it errors with recovery image check failed
Lelouch? said:
Im still at stock recovery...how will i flash a twrp because when i flash it errors with recovery image check failed
Click to expand...
Click to collapse
have you checked the OEM unlock option in the developer options in the settings??
Flash magisk and dont allow system r/w thats dm verify
michaeladige said:
have you checked the OEM unlock option in the developer options in the settings??
Click to expand...
Click to collapse
Yes
ORIGINALNAME123 said:
Flash magisk and dont allow system r/w thats dm verify
Click to expand...
Click to collapse
How can i flash it?
When i flash the magisk zip it errors with signature verification
When i try to root it or flash the patched magisk patched boot it errors with boot image signature check failed...
Sorry for late reply
Lelouch? said:
How can i flash it?
Click to expand...
Click to collapse
Look, i had this issue too i already said what to do.
1. Enable OEM unlock and USB debugging in developer settings
2. flash twrp (but don't boot into it)
3. boot up your phone to system
4. then boot to twrp and where it asks you to like enable system r/w or no select no
5. wipe data
6. from your laptop/pc move magisk.zip to phone
7. flash magisk
8. done
ORIGINALNAME123 said:
Look, i had this issue too i already said what to do.
1. Enable OEM unlock and USB debugging in developer settings
2. flash twrp (but don't boot into it)
3. boot up your phone to system
4. then boot to twrp and where it asks you to like enable system r/w or no select no
5. wipe data
6. from your laptop/pc move magisk.zip to phone
7. flash magisk
8. done
Click to expand...
Click to collapse
i flashed the twrp 3.2.3.0 after i boot up and boot to recovery it still the stock recovery

Rooting for March Update?

Hello fellow A2 Lite owners!
I just got this device today and would LOVE to root 10.0.7.0, However it seems like the only way to go through this is by using a patched boot image which is not viable because none have showed up for 10.0.7.0 yet.
Will there be any other solutions for this? Thank you.
lgstylus2root said:
Hello fellow A2 Lite owners!
I just got this device today and would LOVE to root 10.0.7.0, However it seems like the only way to go through this is by using a patched boot image which is not viable because none have showed up for 10.0.7.0 yet.
Will there be any other solutions for this? Thank you.
Click to expand...
Click to collapse
I personally feel installing twrp offians twrp and flashing magisk is easyer
rob420p said:
I personally feel installing twrp offians twrp and flashing magisk is easyer
Click to expand...
Click to collapse
Obviously, It is my preferred way since I used it on a couple of devices including my Redmi Note 4 and Mi Pad.
My concern is not OTA but whether it would somehow break the ROM
Yes, I am aware of Mi Flash, Flashing stock ROMS, and other techniques but it's just that i don't have time for such long endeavors and would like to have a safe-ish way.
However I will try to get twrp running temporarily to install magisk.
lgstylus2root said:
Obviously, It is my preferred way since I used it on a couple of devices including my Redmi Note 4 and Mi Pad.
My concern is not OTA but whether it would somehow break the ROM
Yes, I am aware of Mi Flash, Flashing stock ROMS, and other techniques but it's just that i don't have time for such long endeavors and would like to have a safe-ish way.
However I will try to get twrp running temporarily to install magisk.
Click to expand...
Click to collapse
No it will not break the ROM I'm running the March update with twrp n magisk the only thing that does not work is backup n restore there is a new twrp 3.3.3.0 but I haven't installed it yet.
rob420p said:
No it will not break the ROM I'm running the March update with twrp n magisk the only thing that does not work is backup n restore there is a new twrp 3.3.3.0 but I haven't installed it yet.
Click to expand...
Click to collapse
How did you get TWRP to work? I am using the official image but whenever i boot into the .img, click cancel as instructed, and install the twrp zip, the result is that when i try to boot into recovery it says System has been destroyed (recovery only, normal boot is ok)
lgstylus2root said:
How did you get TWRP to work? I am using the official image but whenever i boot into the .img, click cancel as instructed, and install the twrp zip, the result is that when i try to boot into recovery it says System has been destroyed (recovery only, normal boot is ok)
Click to expand...
Click to collapse
Go to the pa ROM page and use that twrp that's offians twrp.the best guild ive seen n is type in customdriod mi a2 lite twrp and that page is the best in my opinion to follow I'll see if I can get a link for the page in a minute
Won't let me simend the link
rob420p,
Please provide links.
rob420p said:
Won't let me simend the link
Click to expand...
Click to collapse
Would you be capable of private messaging me the link?
I might have been able to find the link:
ww w.thecustom droid.com /install-twrp-recovery-root-xiaomi-mi-a2-a2-lite
Obviously remove all spaces.
lgstylus2root said:
I might have been able to find the link:
ww w.thecustom droid.com /install-twrp-recovery-root-xiaomi-mi-a2-a2-lite
Obviously remove all spaces.
Click to expand...
Click to collapse
I have followed this guide but it would always result in the installed version of TWRP not installing correctly, and the system mentioning "The System has been destroyed, Press power button to shut down"
How can i resolve this?
I just uploaded the boot and patched_boot imgs for 10.0.7.0 (March update) here are the links:
Stock boot.img : https://drive.google.com/open?id=17ukUahutrGCcx38ZXfzMaCCle71M_QuP
Patched boot.img with latest Magisk (07.04.2019 - I suggest patching the stock on your own to root the device) : https://drive.google.com/open?id=1RxFZcwi0utL3qGp9LKDMneBbggNMHmGY
marstonpear said:
I just uploaded the boot and patched_boot imgs for 10.0.7.0 (March update) here are the links:
Stock boot.img : https://drive.google.com/open?id=17ukUahutrGCcx38ZXfzMaCCle71M_QuP
Patched boot.img with latest Magisk (07.04.2019 - I suggest patching the stock on your own to root the device) : https://drive.google.com/open?id=1RxFZcwi0utL3qGp9LKDMneBbggNMHmGY
Click to expand...
Click to collapse
I figured out how to do it either way, thank you for your efforts however!
lgstylus2root said:
I figured out how to do it either way, thank you for your efforts however!
Click to expand...
Click to collapse
You can add the links to the main thread so that people can see :good:
Hi
Im trying to root V10.0.7.0.PDLMIXM Android on my A2 Lite with Magisk.
After fastboot boot patched_boot.img
Im getting bootloop, phone cannot boot (google lines endless loading).
After restart, goes well but no root.
Please help ! Thanks
max-damage said:
Hi
Im trying to root V10.0.7.0.PDLMIXM Android on my A2 Lite with Magisk.
After fastboot boot patched_boot.img
Im getting bootloop, phone cannot boot (google lines endless loading).
After restart, goes well but no root.
Please help ! Thanks
Click to expand...
Click to collapse
Search before asking : https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
I did search and I followed procedure.
My phone fails to boot on step 10. when I load temporary patched boot.img over fastboot.
Thats my current problem.
I tried to load up downloaded pached boot.img for version V10.0.7.0.PDLMIXM
I also tried to make patched boot.img from original boot.img over phone via Magisk. It doesnt work, bootloop again.
max-damage said:
I did search and I followed procedure.
My phone fails to boot on step 10. when I load temporary patched boot.img over fastboot.
Thats my current problem.
I tried to load up downloaded pached boot.img for version V10.0.7.0.PDLMIXM
I also tried to make patched boot.img from original boot.img over phone via Magisk. It doesnt work, bootloop again.
Click to expand...
Click to collapse
I'm stuck with the same problem.
Booting with patched_boot.img (made on my own or downloaded from this forum) make the phone not starting, blocked on white screen.
Have you already solved?
lgstylus2root said:
How did you get TWRP to work? I am using the official image but whenever i boot into the .img, click cancel as instructed, and install the twrp zip, the result is that when i try to boot into recovery it says System has been destroyed (recovery only, normal boot is ok)
Click to expand...
Click to collapse
Only boot twrp not to Flash it...
Boot twrp command » fastboot boot twrp.img
Flash twrp command » fastboot flash recovery twrp.img
I assume you tried "flashing twrp" command, if that's the case it will replace your boot.img to twrp.img that's why it appears the "system has been destroyed" error... Try the "boot twrp command" if you want to access twrp temporarily... Coz right now we cant do(flash full twrp recovery) that as far as I know....
Winchester316 said:
Only boot twrp not to Flash it...
Boot twrp command » fastboot boot twrp.img
Flash twrp command » fastboot flash recovery twrp.img
I assume you tried "flashing twrp" command, if that's the case it will replace your boot.img to twrp.img that's why it appears the "system has been destroyed" error... Try the "boot twrp command" if you want to access twrp temporarily... Coz right now we cant do(flash full twrp recovery) that as far as I know....
Click to expand...
Click to collapse
I believe we can I have heard reports offains 3.3.3. Twrp can do it I haven't tryed yet.but I did have twrp with root running on the march update but I'm on pa now

[Solved][PX5 GS] Can not use custom recovery

I would like to flash custom recovery -> in order to use custom ROM -> in order to gain split screen in my 7" device (ehhh)
I have root, adb, access to bootloader (everything what I need..) but it does not work in default way.. - I mean flashing just by fastboot flash recovery TWRP.img
I have checked those TWRP builds
https://twrpbuilder.github.io/downloads/twrp/ (type px5)
Flashing worked fine (no error, success message)
But after rebooting to recovery I still have original recovery. Note: I have to reboot to system, and then to recovery by adb command. There is no reset button on my device, I can only enter bootloader by long pressing volume button while booting.
I saw `backup` partition in my device. Is it possible that system is reverting recovery partition? How to fix that so I can use TWRP
SZAMAN92 said:
I would like to flash custom recovery -> in order to use custom ROM -> in order to gain split screen in my 7" device (ehhh)
I have root, adb, access to bootloader (everything what I need..) but it does not work in default way.. - I mean flashing just by fastboot flash recovery TWRP.img
I have checked those TWRP builds
https://twrpbuilder.github.io/downloads/twrp/ (type px5)
Flashing worked fine (no error, success message)
But after rebooting to recovery I still have original recovery. Note: I have to reboot to system, and then to recovery by adb command. There is no reset button on my device, I can only enter bootloader by long pressing volume button while booting.
I saw `backup` partition in my device. Is it possible that system is reverting recovery partition? How to fix that so I can use TWRP
Click to expand...
Click to collapse
That TWRP don't work in PX5. I'm trying to get it work
Good luck!
Please inform me if you will succeed.
Have you first tried to boot TWRP without flashing? I'd most certianly want to try that before flashing something.
Did that work?
This might sound super silly, but did you also unlock the bootloader first? (Sorry, I'm not familiar with your specific device so this may or may not apply in your situation)
stokedcrf said:
Have you first tried to boot TWRP without flashing? I'd most certianly want to try that before flashing something.
Did that work?
This might sound super silly, but did you also unlock the bootloader first? (Sorry, I'm not familiar with your specific device so this may or may not apply in your situation)
Click to expand...
Click to collapse
Any advice is welcome thanks
But without unlocking bootloader I would not be able to go to bootloader and use fastboot tool right? So I concluded it is already unlocked.
I tried
fastboot boot TWRP.img
Image was downloaded and booted (success message was printed in console), I lost connection with device so it went in some other mode then bootloader, but after 30 seconds of black screen I have switch power off and back on to restart.
SZAMAN92 said:
Any advice is welcome thanks
But without unlocking bootloader I would not be able to go to bootloader and use fastboot tool right? So I concluded it is already unlocked.
I tried
fastboot boot TWRP.img
Image was downloaded and booted (success message was printed in console), I lost connection with device so it went in some other mode then bootloader, but after 30 seconds of black screen I have switch power off and back on to restart.
Click to expand...
Click to collapse
What android version you have ? 8 ?
tuga_z said:
What android version you have ? 8 ?
Click to expand...
Click to collapse
9
Build nr: rk3368-userdebug 9 PQ2A 190305
Kernel v: 4.4.167
MCU: MTCE_GS_V3.07_3
It is that build:
https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 9/HA/HA_px5_9.0_ota(20190528)升级包.7z
I tried using A8 roms but I can not flash it with original recovery.. It requires device name be PX5 (I have rk3368). If I remove checking from rom updater script, signature verification fails.
I have tried recovery from Malaysk pack (extracted from update.zip), tried RecoveryInstaller from malaysk, lot of TWRP which I have found in web.
Nothing worked.
However as a last chance I used bootable SD from Malaysk - recovery (for android 8) successfully installed, Malyask rom installed. Im happy now
BTW. If you want you system to not revert recovery - you need to remove "/system/recovery-from-boot.p"
SZAMAN92 said:
I have tried recovery from Malaysk pack (extracted from update.zip), tried RecoveryInstaller from malaysk, lot of TWRP which I have found in web.
Nothing worked.
However as a last chance I used bootable SD from Malaysk - recovery (for android 8) successfully installed, Malyask rom installed. Im happy now
BTW. If you want you system to not revert recovery - you need to remove "/system/recovery-from-boot.p"
Click to expand...
Click to collapse
By this you mean that you no longer need TWRP for android 8 ?
tuga_z said:
By this you mean that you no longer need TWRP for android 8 ?
Click to expand...
Click to collapse
I mean I already have Recovery v8. So I was been able to flash custom A8 ROM.
However if you would implement TWRP please message me It is always better.
SZAMAN92 said:
I mean I already have
However if you would implement TWRP please message me It is always better.
Click to expand...
Click to collapse
Except if you ever want to update your unit or MCU, then it's pretty much useless.
marchnz said:
Except if you ever want to update your unit or MCU, then it's pretty much useless.
Click to expand...
Click to collapse
Maybe you are right. But at least it is easier to backup / restore whole device with TWRP.

How to flash corvus os 15 Android r in redmi 10x 5g

341 redmi 10x 5G
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
https://unofficialtwrp.com/wp-content/uploads/2019/11/vbmeta.zip
1 flash miui recovery img
Go to fastboot and type fastboot flash recovery recovery1.img
After that hold power button and volume up button until you see a Chinese menu with three options first select option two after that option one and after that option two after wiping data you will see that three options again select option one and select option one then hold volume down button until you see fastboot
Type fastboot reboot fastboot
Wait
You will see fastbootd then rename corvus image to system.img
Then type
Fastboot flash system.img
Click power button
Wait
When you see corvus boot animation hold power button and volume down button until you see fastboot
Rename twrp image to recovery.img
Then type
Fastboot flash recovery recovery.img
Fastboot flash vbmeta vbmeta.img
Fastboot flash misc misc.bin
Fastboot boot recovery.img
In twrp flash permissiver 5 then reboot to system
Done.
If you want gapps download magisk app
Downloading Magisk App... | Magisk Manager
The download will automatically start in 5 seconds, please click here to access the download URL directly. If you are confused and want to know how to install the Magisk Manager on your phone you can click here.
magiskmanager.com
When it's download rename it to magisk.zip
Go to twrp
Flash it
Reboot to system rename it to magisk.apk and install it after that download this file
https://sourceforge.net/projects/magiskgapps/files/r/Core/MagiskGApps-core-V1.0.zip/download
After that go to magisk in modules go to install from storage and select zip you downloaded flash it with magisk after reboot you will see play store is added to your app drawer install Google apps you need from play store
https://sourceforge.net/projects/tipzbuilds/files/GSIs/CorvusROM/Alpha/20210329/Corvus_v15.0-RavenClaw-treble_arm64_ab-nonlite-29032021-Unofficial-1117.img.xz/download
While this technique certainly appears to have been researched. Running though the instructions has resulted in my device caught in a boot-loop. A pretty serious one too. I can no longer access the bootloader or recovery/
I fear the state my device is in is 'soft bricked/ I have no clue have to resolve this and without access to the bootloader I can't rollback anything.
Some friendly notes for Hsnmastoor:
You should re-format the post. Writing the instructions then at the end supply the links and file attachments in the order in which they should be run As it is, the instructions are confusing .
If anyone has any ideas how to correct the boot loop, plug me in
resirch26 said:
While this technique certainly appears to have been researched. Running though the instructions has resulted in my device caught in a boot-loop. A pretty serious one too. I can no longer access the bootloader or recovery/
I fear the state my device is in is 'soft bricked/ I have no clue have to resolve this and without access to the bootloader I can't rollback anything.
Some friendly notes for Hsnmastoor:
You should re-format the post. Writing the instructions then at the end supply the links and file attachments in the order in which they should be run As it is, the instructions are confusing .
If anyone has any ideas how to correct the boot loop, plug
Click to expand...
Click to collapse
You flashed permissive in twrp?
Hsnmastoor said:
You flashed permissive in twrp?
Click to expand...
Click to collapse
If not flash it
Hsnmastoor said:
If not flash it
Click to expand...
Click to collapse
sim card inactive
Hsnmastoor said:
You flashed permissive in twrp?
Click to expand...
Click to collapse
I can't flash anything. I no longer have access to the bootloader or recovery. Phone is stuck in a bootloop.
resirch26 said:
I can't flash anything. I no longer have access to the bootloader or recovery. Phone is stuck in a bootloop.
Click to expand...
Click to collapse
Hold power button and volume down for fastboot. Power with volume up for recovery
dothaison said:
sim card inactiv
Click to expand...
Click to collapse
Can you check IMEI?
Hsnmastoor said:
Bạn có thể kiểm tra IMEI không?
Click to expand...
Click to collapse
I can't test IMEI
Hsnmastoor said:
Can you check IMEI?
Click to expand...
Click to collapse
can you give me nvdata backup? . I have lost my IMEI.
Hsnmastoor said:
Can you check IMEI?
Click to expand...
Click to collapse
I have lost IMEI. Can you give me a backup nvram ? thank you.
dothaison said:
I have lost IMEI. Can you give me a backup nvram ? thank you.
Click to expand...
Click to collapse
Nvram.img
drive.google.com
Has anyone flashed this successfully?
any bugs? i flashed crdroid. it's too buggy
Hi everybody,
Still mad at myself for buying this phone (with MediaTek SOC) because of the lack of custom ROM support. Never had this issue before with any of my phones. If only i knew this before. The hardware of the phone is great, but the software makes it really frustrating to work with.
So i've tried a lot of things to either mod the original (Chinese) ROM so it's at least functional. And i have also tried multiple of these GSI ROM install methods. Everytime without succes.
I've tried your previous method with the 'GSI installer' and the one from this guide. Neither of them worked. (Boot loop). I have a feeling i run into trouble because (if i'm correct) the original ROM uses a 'super' partition and not a 'system' partition.
If i remember correctly the GSI installer couldn't continue because it couldn't find the system partition.
In this guide (for corvus) i figured i'd flash the system.img to my super partition. Of cource that doesn't work either. If only it was that simple.
Everytime it fails i have to flash back to a standard xiaomi ROM and start all over again. Because for some reason the TWRP backups also dont work for me.
So maybe i'm missing a step in the guide or i've already tried so much to mod my phone i've changed settings/partitions that shouldn't have been changed for this guide to work.
My bootloader is unlocked, i have/had TWRP 3.41 installed.
After a fail i flash back to the original ROM using Xiaomi ABD/Fastboot Tools (xiaomiABDFastbootTools.jar)
Any help would be appreciated!
I never had issue when I flashed the GSI from the crdroid guide did you make sure that you put the GSI installer.zip and the image file rename to system.img to the root internal storage??
Yes i did. It could also find the system.img file, but just wasn't able to flash it.
Can you tell mw what ROM you were flashing from?
Abducted23 said:
Yes i did. It could also find the system.img file, but just wasn't able to flash it.
Can you tell mw what ROM you were flashing from?
Click to expand...
Click to collapse
First I flashed crdroid. but did not like it. then I flashed blissrom using the same guide for crdroid. i just downloaded the rom posted on the guide. while for the bliss rom the arm64-bgN
Did you wipe data first before flashing?

Stuck at TWRP splash screen

I recently updated to MIUI v12.5.1.0.RCDMIXM using a recovery zip through TWRP. A few days later I decided to flash Magisk by patching the boot.img from the same zip and flashed using fastboot.
Everything worked fine until I rebooted to recovery using the Magisk app. Now it's stuck at the TWRP splash screen, can't even reboot or enter fastboot with power and volume buttons because it will always try to boot to TWRP.
What do I need to do to fix this?
This is where I got the TWRP
Just erase/format the MISC partition.
This partition holds a "go to recovery" parameter.
VD171 said:
Just erase/format the MISC partition.
This partition holds a "go to recovery" parameter.
Click to expand...
Click to collapse
Okay, but how exactly can I do that? It's been stuck like this since last night and won't go to fastboot with vol keys..
Can you use TWRP ?
If not, you need sp flash tool.
Try to flash boot.img and recovery.img.
VD171 said:
Can you use TWRP ?
If not, you need sp flash tool.
Try to flash boot.img and recovery.img.
Click to expand...
Click to collapse
TWRP is stuck at the state in the picture I sent.
I'll try using SP Flash, but I think I remember that Xiaomi devices have SLA auth to prevent unauthorized flashing using SP Flash. Will your scatter file work without it?
VD171 said:
Can you use TWRP ?
If not, you need sp flash tool.
Try to flash boot.img and recovery.img.
Click to expand...
Click to collapse
I just realized that the zip file or any other version does not include a stock recovery.img...
Do you have the Global v12.5.1.0 stock recovery? Or I could just use any version like vbmeta?
The phone's battery just drained, if I try to plug it would try to boot into twrp again so I kept it unplugged since I need it to be turned off for SP Flash
Reyproject said:
TWRP is stuck at the state in the picture I sent.
I'll try using SP Flash, but I think I remember that Xiaomi devices have SLA auth to prevent unauthorized flashing using SP Flash. Will your scatter file work without it?
Click to expand...
Click to collapse
Exactly.
You need to bypass EDL auth:
[GUIDE] How To bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com
Reyproject said:
I just realized that the zip file or any other version does not include a stock recovery.img...
Do you have the Global v12.5.1.0 stock recovery? Or I could just use any version like vbmeta?
The phone's battery just drained, if I try to plug it would try to boot into twrp again so I kept it unplugged since I need it to be turned off for SP Flash
Click to expand...
Click to collapse
You said "fastboot", so you need the fastboot ROM.
SP flash tool does NOT need the device to be turned off, it just need to REBOOT.
If you try to flash while a reboot to another reboot, it will works perfectly.
Which magisk did you flash? 23 is not working for 9A
yaro666 said:
Which magisk did you flash? 23 is not working for 9A
Click to expand...
Click to collapse
Magisk V23.0 is the BEST MAGISK EVER !
yaro666 said:
Which magisk did you flash? 23 is not working for 9A
Click to expand...
Click to collapse
It does tho, i've been using it since the first use of this phone (12 and 12.5)
Applewubs said:
It does tho, i've been using it since the first use of this phone (12 and 12.5)
Click to expand...
Click to collapse
Are you still in 12.5? Do you also use a custom recovery in that version?
Just managed to access a laptop and got to fix the situation. Turns out I can still use adb even though TWRP is stuck on the logo screen.
First tried the `fastboot erase misc` command but misc partition doesn't exist on the device.
Tried `fastboot continue` but won't let me use the command and `fastboot reboot` just makes it go to recovery and get stuck again.
I flashed Orange Fox Recovery and it was still stuck at it's splash screen. So I went back to fastboot and for some reason `fastboot reboot` worked now and booted to system, further restarts are normal now.
Now I'm curious, why won't custom recoveries work with MIUI 12.5? When I tried accessing root, every folder (ex. system) is in this format [1;34system[0m, does it have something to do with that?
Still trying to get the stock recovery, but there's no fastboot rom file for this version yet...
yaro666 said:
Which magisk did you flash? 23 is not working for 9A
Click to expand...
Click to collapse
Magisk v23 works just fine, just patch the boot.img file of your ROM version and flash it with custom recovery or fastboot.
Reyproject said:
Are you still in 12.5? Do you also use a custom recovery in that version?
Click to expand...
Click to collapse
Theres one TWRP that doesnt have a splashscreen, in that one just block and unblock the screen while on recovery and it'll work fine. BUT your internal storage isn't going to be accesible, its encrypted and (for some reason) on 12.5 twrp cant unlock the storage, you'll have to do everything on your sdcard
Reyproject said:
Just managed to access a laptop and got to fix the situation. Turns out I can still use adb even though TWRP is stuck on the logo screen.
First tried the `fastboot erase misc` command but misc partition doesn't exist on the device.
Tried `fastboot continue` but won't let me use the command and `fastboot reboot` just makes it go to recovery and get stuck again.
I flashed Orange Fox Recovery and it was still stuck at it's splash screen. So I went back to fastboot and for some reason `fastboot reboot` worked now and booted to system, further restarts are normal now.
Now I'm curious, why won't custom recoveries work with MIUI 12.5? When I tried accessing root, every folder (ex. system) is in this format [1;34system[0m, does it have something to do with that?
Still trying to get the stock recovery, but there's no fastboot rom file for this version yet...
Click to expand...
Click to collapse
I thinks its because they cant unlock the storage, they keep trying and just keeps stuck on trying.

Categories

Resources