Database Info

[ROM][UNOFFICIAL] [[Cynogen Mod 12.1]] Huawei Y6 PRO [TIT-AL00]

I am not make this ROM​
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Now I want to showing,How to instal CM12.1 for Huawei Y6 pro
Start->
1st
*click me and read it
*Requirements file :
Cynogen Mod 12.1: Download
Gapps: Download
#Install Process
1. Downloaded Rom and gapps put in sd card.
2.. Power off your Phone
3. Press Vol+ and power button and go to Recovery mode
4. CWM recovery mod and wipe menu, wipe data and go back to menu and go to munt... and format System and go back to menu.
5. Now select Install zip>choose zip form external_sd card>select ROM and wait.
6. Then install GAPPS.
7.REBOOT
8. 1st time boot take a sometimes like 5-10min.Don't worry.
*Tested on Huawei Y6 pro TIT-AL00.
BUG
*USB OTG NOT WORK
---------------------------------------------------------------------------------------------------------------------------
enjoy Cynogen MOD 12.1:good::good:

Is this rooted? Thanks!

hello,
thanks for the rom. really love cynogenmod. just a quick question, is it ok to install gapps stock package from opengapps website?
is this attached gapps package is mini/micro/pico?

CyanogenMod Marshmallow Huawei Tit-AL00
Please Link for Cyanogenmod HUAWEI TIT-AL00 Marshmallow version quick. Bored of Lollipop.

Can you tell me that how to install using twrp recovery and the procedure to go back to precious rom (i have twrp backup)

Is this rom work in Huawei Y6 Pro TIT-L01 ?

Work on TIT L01 ?

[TREBLE][ROM] Android P sGSI

Code:
/* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this TREBLE
* SUPPORT before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
What will it take?
PItchBlack
Lineage treble build
Android P PQ1A sGSI
Patches
Google Play Services(Save in SD card. Otherwise, you can not advance to step 10)
Data Transfer Tool (Save in SD card. Otherwise, you can not advance to step 10)
How to install?
Flash this PItchBlack with treble support (thanks @sayad1)
Format data and Wipe /dalvik/system/cache/data and internal storage
Install this Lineage treble build
Reboot. After restarting, go back to Pitchblack
Wipe Factory Reset
Install Android P PQ1A sGSI
Mount vendor on PItchBlack
Install all these patches in the following order:
POST-sGSI_1_v0.15.zip
POST-sGSI_2_v0.18.zip
POST-sGSI_3_v0.6.zip
sGSIFix_3.zip
POST-sGSI_Pixelv1.zip
POST-sGSI_Pixelv4_ims.zip (for volte)
Reboot
Install the Google Play Services and Data Transfer Tool using their respective apk
Reboot again
Go back to PIckBlack and install this last patch:
LagFix_Jan19_Pixel_3_XL.zip
Enjoy
Bugs
Notch
You Tell me
Notes
Wait for all updates to be installed to start using the phone.
Credits
candiesdoodle by the patches

Cairo100 said:
What will it take?
PItchBlack
Lineage treble build
Android P PQ1A sGSI
Patches
Google Play Services(Save in SD card. Otherwise, you can not advance to step 10)
Data Transfer Tool(Save in SD card. Otherwise, you can not advance to step 10)
How to install?
Flash this PItchBlack with treble support (thanks @sayad1)
Install this Lineage treble build
Wipe Factory Reset
Mount vendor on PItchBlack
Reboot
Reboot again
Enjoy
Bugs
Notch
You Tell me
Notes
Wait for all updates to be installed to start using the phone.
Credits
candiesdoodle by the patches
Click to expand...
Click to collapse
This is not new

Meh

g070140 said:
This is not new
Click to expand...
Click to collapse
This ROM was ported from Pixel 3 XL.
Maybe someone like me wanted to use but could not boot. So I decided to create the topic with the fixes and instructions needed for these people to enjoy ROM.

[TWRP][OFFICIAL] TWRP 3.3.0-0 for UMIDIGI F1 Play [MT6771]

This TWRP Recovery Is Compiled From Source & Officially Supported
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. Now unplug your device and then hold power button untill the phone turned off,after that press power button while holding vol down(-) button simultaneously and you will boot into TWRP recovery mode.
Enjoy !
Downloads
Official TWRP Page: https://twrp.me/oukitel/umidigif1playhtml
Unofficial GitHub Release : Here (release name : TWRP-OUKITEL-WP1)
Version Information
ROM OS Version: 8.1 Oreo
Source Code: Device Tree
Based On: TWRP
Credits
Omni Team for minimal TWRP source
@chankruze (myself) for device tree and compilation.
SUPPORT
Official Telegram Group
Official Telegram Channel

Does anyone knows if this can be installed on the "normal" F1 (not the F1 Play)?

If I unpack this and swap kernel for the F1 can I post it in F1 thread to share. Or can the f1 be added as a build branch?
EDIT:
Well it boots, but does not have working MTP.
the one i have been using already(a ported one) has working MTP, I will stay with it.

chankruze said:
This TWRP Recovery Is Compiled From Source & Officially Supported
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. Now unplug your device and then hold power button untill the phone turned off,after that press power button while holding vol down(-) button simultaneously and you will boot into TWRP recovery mode.
Enjoy !
Downloads
Official TWRP Page: https://twrp.me/oukitel/umidigif1playhtml
Unofficial GitHub Release : Here (release name : TWRP-OUKITEL-WP1)
Version Information
ROM OS Version: 8.1 Oreo
Source Code: Device Tree
Based On: TWRP
Credits
Omni Team for minimal TWRP source
@chankruze (myself) for device tree and compilation.
SUPPORT
Official Telegram Group
Official Telegram Channel
Click to expand...
Click to collapse
for UMIDIGI F1 will it ?

Is the BL unlockable with just the old fasboot bl unlock commands? It's a little hard to find info on this thing. Must not be very popular yet.

Does this work on Android 9.0

#Starlord37# said:
Does this work on Android 9.0
Click to expand...
Click to collapse
This is for F1 play (which is 9.0 out of the box)

BZ0RG said:
This is for F1 play (which is 9.0 out of the box)
Click to expand...
Click to collapse
Ok I was wondering because it said android 8.1

@Starlord37 The last official release works well too (available at twrp website)

Just owned my F1 play.
Soon I will make my rom for it
Gesendet von meinem F1 mit Tapatalk

[RECOVERY][PBRRP] Pitch Black Recovery 2.9.0 for Ulefone Armor 6 [TESTING]

Note: This going to be official soon
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this project
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Pitch Black Recovery Project (PBRP) is a custom recovery project based on Team Win Recovery Project (TWRP) developed by Reza Adi, maintained by Manjot Sidhu and Mohd Faraz and themed by FireWolf.
Prerequisites
1. Unlocked bootloader.
Bugs
1. Test it, those sides which others haven't tested yet
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
Method 1 (Fastboot Installation)
1. Go to the fastboot mode.
2. Download the pbrp-2.9.0-build-02.img and transfer it to the adb folder (rename is optional for simplicity).
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this PBRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery pbrp-2.9.0-build-02.img
BooM ! PBRP flashed successfully.
Method 2 (TWRP Installation)
1. As far i know there is an official twrp. If you have it installed in your device, then this is just a piece of cake
2. Flash PitchBlack-Armor_6-2.9.0-20190716-1537-UNOFFICIAL.zip from twrp.
3. It will reboot to recovery automatically after that.
BooM ! PBRP flashed successfully.
Notes
DM-Verity patch added to flashable zip
Force Encryption patch also added to flashable zip
Downloads
Both Image & Zip=> https://www.androidfilehost.com/?w=files&flid=296747
Contributors
chankruze
Source Code: https://github.com/N00bTree/android_device_ulefone_Armor_6
Version Information
Status: Testing

Honestly, thank you so much for this.
I can confirm it works on the Ulefone Armor 6 for me. I just tried it and works perfectly.

[ROM][UNOFFICIAL][8.1.0]LineageOS 15.1 - 20211229

Code:
/*
* Your (probably expired) warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS 15.1 for MI MIX
Beware, you are about to enter a dangerous zone!​
ABOUT
This is an unofficial Oreo build for the Xiaomi MI MIX (lithium) based on official LineageOS 15.1 for MI MIX.
This build is not made solely for the intention of public release, but more for my personal use. Therefore, updates are not guaranteed, and you should expect changes in functionalities compared to official LineageOS 15.1. I always upload my builds on xda, so that it may benefit those who needed, especially for older Android builds like this.
Read the sections below carefully to understand the status of this ROM and how to prepare your device for installation.
CREDITS
Full credits to @bgcngm , Xiaomi MI MIX, MSM8996, LineageOS and all other developers. This is a build completely based on official LineageOS 15.1 sources for MI MIX. I do not contribute anything except performing source modification and compiling builds.
INSTALLATION FROM STOCK
Follow these steps if you are coming from stock. You will need access to a PC.
1. Check for unlocked bootloader. Go to About Phone, toggle MIUI version until Developer Options is enabled.
2. Go to Developer Options in Additional Settings. Check for Unlock Status of your device.
3. If it is not unlocked, follow the instructions to pair a Xiaomi account and unlock the device using your PC.
4. After unlocked, download the latest copy of stock MIUI (optional: flashtool) and reflash the device with the option flash_all (Clean All) using Fastboot, if you haven't flash as such before on your device.
5. Reboot into system and ensure everything is okay.
6. Now, download latest official TWRP and flash from Fastboot.
Code:
fastboot flash recovery ./path/to/twrp-3.2.1-0-lithium.img
7. Reboot recovery by executing 'fastboot reboot' while holding Volume Up.
INSTALLATION
Please backup your Persist partition, and store in a dry, safe place.
Code:
adb pull /dev/block/bootdevice/by-name/persist
The below instructions assumes that your device has TWRP and latest firmware installed. All your data will be destroyed in the process.
1. Reboot recovery. Wipe /cache, /system. Then, run Format Data.
2. Proceed to flash my builds.
3. Flash ARM64 GAPPS and SU if desired, or Magisk if you need systemless root support.
4. Prepare a coffee or tea and sit back on your couch. Click to reboot system, BUT DO NOT SWIPE TO INSTALL TWRP APP or you will end up in a bootloop!
DOWNLOAD
Google Drive
SOURCE
GitHub - leewp14/local_manifests
Contribute to leewp14/local_manifests development by creating an account on GitHub.
github.com
GitHub - hikuii/android_kernel_xiaomi_msm8996
Contribute to hikuii/android_kernel_xiaomi_msm8996 development by creating an account on GitHub.
github.com

LineageOS 15.1
LATEST BUILD
lineage-15.1-20211229-UNOFFICIAL-lithium
kernel-62801657fd55aff025e17f429f2e050581dae278
NOT WORKING/UNTESTED
- DRM: untested
BUILD-SPECIFIC NOTES
- Snap has been removed in favor of AOSP's Camera2.
- SELinux is enforcing.
- SafetyNet passes out of the box (as of time of release)
INSTALLATION NOTES
- When prompted in TWRP, do not install TWRP Updater app as it will cause softbrick.
- To pass SafetyNet, you must install Magisk and enable MagiskHide.

Changelog
20211229
- general: ASB 2021-10 (no further ASB updates for 8.1.0)
- device: remove XiaomiDoze
- device: enable autosuspend decouple from display
- device: spoof bootloader status to circumvent SafetyNet detection
​​OLD CHANGELOG
20210320
- general: initial build, ASB 2021-03
- device: remove Snap
​
​