Code:
*** Disclamer
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
[B][U][SIZE="5"]Introduction[/SIZE][/U][/B]
[QUOTE]
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1.2 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
LIneageOS 14.1 has now been ported from source and is available for the Brown 1. This ROM is not recommended to be used as a daily driver because of its issues. As usual do not hesitate to let us know of any issues regarding this ROM.
[/QUOTE]
[B][U][SIZE="5"]Installation instructions[/SIZE][/U][/B]
[QUOTE]
-- 1. Unlock the bootloader of your device on PC through ADB. Do a research about it on Google.
• Before proceeding, please make sure that you have already installed MediaTek USB Drivers on your PC, otherwise it will not work!
• Plug your Brown 1 to your PC
• Go to a folder, and right click to reveal the “Open Command Window Here” option by holding the “Shift” button and by clicking the right button of your mouse simultaneously.
• Type this line “adb reboot bootloader”
• Once your Brown 1 is in its bootloader, type this another line “fastboot oem unlock”
• Now, once it’s unlocked, It will erase everything stored in your phone’s Internal Storage. Please do a backup of your files first to avoid losing your files.
• Congrats, Bootloader is now unlocked!
2. After unlocking the bootloader, flash TWRP via PC.
• Before proceeding, please make sure that you have already downloaded all the files in your SD Card, otherwise, your Brown 1 will encounter a bootloop.
• Install MediaTek USB Drivers and “15 Second ADB Installer” from XDA.
• After installing. Download the PitchBlack Recovery File.
• Now, go to the folder where the pitchblack recovery is downloaded, and right click to reveal the “Open Command Window Here” option by holding the “Shift” button and by clicking the right button of your mouse simultaneously.
• Type this line “adb reboot bootloader”
• Your Brown 1 should boot now into its bootloader, now, type this line “fastboot flash recovery PBRP-2.9.0-20190119-V4701_I01-UNOFFICIAL.img”
• After that, type this line “fastboot boot PBRP-2.9.0-20190119-V4701_I01-UNOFFICIAL.img”
• Your Brown 1 should boot automatically to PitchBlack Recovery.
• Done!
3. Decrypt your phone.
• If you’re now on Pitch Black Recovery, ignore the “Enter your encryption password” dialogue, and then flash “Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip” from your SD Card to decrypt your Brown 1.
• After that, reboot your phone to recovery mode again, and then perform a factory reset.
• Done!
4. (OPTIONAL) Firmware Backup
• Click the “Backup” Button
• Swipe to perform the action
• Done! You can use this backup file when you encountered a bootloop, or something like that.
5. Flash Lineage OS 14.1
• Root first, Flash "Magisk (v18.0).zip" on PitchBlack Recovery
• After that, Click the “Wipe” button
• Perform a clean wipe by clicking the “Advanced” button and ticking system, data, dalvik and cache. Do not wipe your SD Card or your Internal Storage.
• Locate where the Custom ROM is stored and look for this file “lineage-14.1-20190525-UNOFFICIAL-V4701_I01.zip"
• And then, Flash it.
• After flashing it, flash Google Apps by looking for “open_gapps-arm64-7.1-mini-20190119.zip”
•After flashing Google Apps, flash Magisk again to obtain root access, look for "Magisk (v18.0).zip"
• After flashing all those files, reboot your system and enjoy!
• Congratulations! You have now flashed Lineage OS 14.1 on your Brown 1! Please take note that first boot will take 5 to 10 minutes, so please be patient.
[/QUOTE]
[B][U][SIZE="5"]Changelog[/SIZE][/U][/B]
[QUOTE]
[CODE]
Current changelog: -- v1.0 (20190525)
[note] -- • First Initial Release
• March 2019 Security Patch from Sources
• Based from Nokia 3
What's working?
-- - Connectivity
• Wi-Fi
• Bluetooth
• Hotspot
• RIL
• SIM Cards
• LTE Connectivity
- Miscellaneous
• Audio
• Flashlight
• Some Sensors
• Offline Charging (No Glitches)
- Recording
• Screen Recorder (Both in-built and app built)
• Audio Recorder
• Screen Capture
- Others
• Almost Everything Works
Click to expand...
Click to collapse
What are the bugs?
-- - Minor
• Camera - There's issues you might face when recording in video mode; The Camera app force closes once the mode's been changed to video mode
• Music App - The Application force closes everytime you open it. There will be a patch soon.
• FM Radio - The Application force closes everytime you open it.
• MTP Host - The Application force closes.
• CM Audio Service - The Application force closes.
- Major
• Android Application Installation - You won't be able to finish the installation of an application from Google Play Store or Android Package Installer if an error pops-up. The solution to install an application is to reboot the device everytime you encounter an error. There's no fix for this bug this time.
• Fingerprint Sensor - The fingerprint sensor of your phone won't be able to detect your fingerprint even when you point it to the sensor. There will be a patch soon.
Click to expand...
Click to collapse
Download
-- Lineage OS 14.1 for brown 1 (V4701_I01)
https://www.mediafire.com/file/jt2jf5sqc4xcg8q/lineage-14.1-20190525-UNOFFICIAL-V4701_I01.zip/
Click to expand...
Click to collapse
Credits
Code:
* • Lineage OS Team – For the continuation of the CyanogenMod Project; for developing this AOSP based ROM
* • Optimitist ROM Portings (My Team) – For distributing the ROM that I ported
* • Brahm Daniel Verano (me) – For making this possible to Brown 1 and MediaTek MT6735 devices
XDA:DevDB Information
Lineage OS 14.1 for brown 1, ROM for all devices (see above for details)
Contributors
LiaFourté, Team Xenomorph
ROM OS Version: 7.1.x Nougat
ROM Kernel: Linux 3.18.x
ROM Firmware Required: Stock Firmware
Based On: Lineage OS
Version Information
Status: Alpha
Current Stable Version: v1.5 FINAL (20190905)
Stable Release Date: 2019-09-05
Current Beta Version: v1.1 (20190725)
Beta Release Date: 2019-07-25
Created 2019-06-09
Last Updated 2020-08-13
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-R with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
Pixel Experience Team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 16.1
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
We recommend MindTheGapps as it has been thoroughly tested and it works well with the ROM, some other minimal GApps packages still have issues, however feel free to try other GApps if you want to, just try MindTheGapps if you have any GApps related issues
MindTheGapps: https://androidfilehost.com/?w=files&flid=322935
Mirror: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Does this ROM include GApps or do I have to flash them separately?
A. No, we do not include prebuilt GApps, because of possible licensing issues with Google Software and because some users do not want GApps preinstalled as they want to use alternative services like MicroG or just prefer flashing a GApps "flavor" of their liking.
Q. Does this ROM use the camera or gallery app from stock?
A. It depends on the device. In most cases these apps include proprietary libs/code and cannot be included in the device trees on Github or we risk having the ROM banned from Github. In this case, we might try to make them installable (separate from the ROM zip), or we might provide a version of these apps with the ROM that doesn't include any proprietary libs. It's also sometimes the case that these apps are simply not included because we didn't feel the need to do so for the device in question.
Q. Does this ROM have Extended/Scrolling screenshot?
A. No, extended screenshot was implemented using an app extracted and modified from manufacturer firmware/system images and is proprietary as well. It led to the closing of many ROM's sources on GitHub.
Q. Does this ROM have FaceUnlock?
A. No, FaceUnlock was also an app extracted and modified from some manufacturers. Even Google removed the Trusted Face (FaceUnlock) feature for security reasons on Android 9.0/10.x. Adding the modified feature did the same to ROM sources as described above.
Q. Can you add (insert favorite weather provider)?
A. No, we cannot add more weather providers as the implementations change and we (the ROM) now have to pay for most services, and that is not cheap, so we decided to use the best free service that we could find, the only way to add your own is for users to apply for their own API key to use their preferred service.
Q. Does this ROM have private official builds with the above proprietary libs included?
A. No, we believe in open source software, this way users know what's in the build and can replicate it themselves, all official builds are built on our build servers using the public sources from github and no one can (or would) add their own private sources to the build.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behavior on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache, and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android R. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
On Clean Flash: mandatory for first install !!!At the beginning, if you are on Stock OOS 11 ROM with locked bootloader, please follow the instructions for unlocking bootloader here: https://wiki.lineageos.org/devices/instantnoodle/install
1. Download the ROM and GApps to your PC with proper adb & fastboot setup.
Also download to your PC instantnoodle-recovery.img from HERE
2. Boot to bootloader and run in cmd (windows) / terminal (linux)
fastboot flash recovery instantnoodle-recovery.img
4. Boot to recovery. Tap on Factory Reset (this will erase everything on your device) then return to main menu
3. Connect your device to your PC and tap on Apply Update -> Apply from ADB and
4. Flash the ROM zip file using
adb sideload aicp_instantnoodle_r-16.1-WEEKLY-{date}.zip
5. Once its finished, reboot to recovery to flash the GApps (optional, needed for e.g. Google Playstore to work). This is mandatory becoz will switch automatically current slot and will flash GAPPS.
Once it boots to recovery, tap on Apply Update -> Apply from ADB then run
adb sideload GAPPS.zip
6. Reboot and set up your device.
7. Reboot back into recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The main workflow for flashing via recovery:
reboot to recovery -> adb sideload ROM.zip -> reboot recovery -> adb sideload GAPPS.zip -> reboot to system
Click to expand...
Click to collapse
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 21.4 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
Go to Aicp Extras -> Update Centre then install new Weekly Build.
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source: We are building Neutrino Kernel adopted to our sources with permission by Kernel Dev
GitHub - AICP/kernel_oneplus_sm8250
Contribute to AICP/kernel_oneplus_sm8250 development by creating an account on GitHub.
github.com
Device tree source:
AICP/device_oneplus_instantnoodle
Device tree for OnePlus 8. Contribute to AICP/device_oneplus_instantnoodle development by creating an account on GitHub.
github.com
Common device tree source:
GitHub - AICP/device_oneplus_sm8250-common
Contribute to AICP/device_oneplus_sm8250-common development by creating an account on GitHub.
github.com
Vendor source:
AICP/proprietary_vendor_oneplus
Contribute to AICP/proprietary_vendor_oneplus development by creating an account on GitHub.
github.com
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Join us on our Discord Channel
Contributors:
(mention all the devs who have contributed to your device tree, kernel, vendor, etc,
only mention the main ones though, probably the top four or so, otherwise this list will be a mile long xD)
Information:[/U[
ROM OS Version: 11.1
Kernel: Linux 4.19.176
ROM {Firmware|Vendor} OnePlus8Oxygen_15.E.35_OTA_0350.
Status: {STABLE}
Release Date: 04-03-2021
You want to see a "normal" night at the "DEV office", click here!!
AICP recovery: link HERE
---------------------------------------------------------------------------------------------------------------
New build guys
10.04.2021 UPDATE
Download aicp_instantnoodle_r-16.1-WEEKLY-20210410.zip from HERE
Changelog: link HERE
No GAPPS in the ROM.zip.
** İf you are comming from older version - no need to flash clean.
-- if you are rooted: Just go to Updater in AicpExtras choose the downloaded zip from your storage and install the update.
-- if you aren't rooted:
**** Download the zip. Connect your phone to your PC. and run adb root in terminal (or cmd windows for Win). Then run adb shell setenforce 0 and install downloaded zip as local upgrade from Updater in AicpExtras. You'll be on enforcing selinux mode after reboot
-- You can flash in recovery via adb sideload. İf you choose this way, don't forget to reboot to recovery and flash your GAPPS.zip via adb sideload again.
-- if you want to clean flash:
**** reboot to recovery. Format data then follow the procedure given below:
flash rom.zip via adb sideload -> reboot recovery -> flash gapps.zip via adb sideload -> reboot to system
What's new:
1. April '21 ASB merged
2. Added ALipay fingerprint payment support
3. Screenbrightness fixes for all 3 devices
4. Many fixes including SafetyNet (fixed again)
Enjoy !!!
---------------------------------------------------------------------------------------------------------------
04.04.2021 Build !!!
Download aicp_instantnoodle_r-16.1-WEEKLY-20210404.zip from HERE.
Changelog: link HERE.
-- There is no GAPPS in the ROM.zip.Download GAPPS from:
MindTheGapps or OpenGapps Android 11 Nano
How to install:
1. Go to recovery. Format data if you want to flash clean.
2. Apply Update from ADB
3. then adb sideload aicp_instantnoodle_r-16.1-WEEKLY-20210404.zip
4. Reboot to recovery
5. Flash Gapps via adb sideload GAPPS.zip
** İmportant: Android Auto fails to connect with OpenGapps. All good with MindTheGapps
** There is no DevicePersonalization app in these - if you want, I can provide a modified GAPPS package
6. If you want to switch in between GAPPS packages, just flash other GAPPS package on the new flash. Clean flash isn't trivial, but recommended....
*** Next flashes can go through Updater or adb sideload.
** If you flash via Updater, backup tool will handle your gapps - no need to reflash them again.
** GAPPS need to be flashed on every update if you flash via adb sideload. Flash them as it is described above.
What's new?
** Stock vibration patterns are back
** App Lock from AOSP-A
** Neutrino Kernel updated to 4.19.183
** and many more....
All feedbacks are appreciated, as always.
Cheerz
---------------------------------------------------------------------------------------------------------------
For those who want to ROOT their devices:
Download Magisk 21.4 zip: link HERE
** boot to recovery
** flash via adb sideload magisk.zip:
** reboot.
** Note that you HAVE to do this on every update.
** SafetyNet is fixed on March 5 build !!!
Enjoy !!
Which Camera we can use:
1. Using this Camera: GCam_7.3.018_Urnyx05-v2.1_Wichaya_V3.1.1_snapcam.apk
2. Also I have thix xml file under GCam/Configs7 : nrG Wichaya 7.3.018_v3.1.1.xml
finally! thanks
Very nice. Quick question. Are Verizon a11 blobs merged ? No custom rom currently gets data for us Verizon op8 users?
mattie_49 said:
Very nice. Quick question. Are Verizon a11 blobs merged ? No custom rom currently gets data for us Verizon op8 users?
Click to expand...
Click to collapse
No unfortunately. Doubt it'll work on Verizon.
semdoc said:
No unfortunately. Doubt it'll work on Verizon.
Click to expand...
Click to collapse
Thanks for quick response. I'm gonna try later anyway. He he. Why is it so hard for us to get data/signal on custom roms. Qti telephony ? Or the 5g modem that gets mm wave?
mattie_49 said:
Thanks for quick response. I'm gonna try later anyway. He he. Why is it so hard for us to get data/signal on custom roms. Qti telephony ? Or the 5g modem that gets mm wave?
Click to expand...
Click to collapse
most likely qti telephony....
Rebuilt and re-uploaded initial build. The issue was broken adb sideload . Now fixed and all should be fine.
Download aicp_instantnoodle_r-16.1-WEEKLY-20210305.zip from HERE
Cheers.
Thanks for the rom, working great, but has same issue as all lineage based roms...video calls have audio distorted (too loud) and bad feedback from mic. Any fixes in the pipeline? Thanks again!
passion8059 said:
Thanks for the rom, working great, but has same issue as all lineage based roms...video calls have audio distorted (too loud) and bad feedback from mic. Any fixes in the pipeline? Thanks again!
Click to expand...
Click to collapse
Will check it out Thanx for feedback
passion8059 said:
Thanks for the rom, working great, but has same issue as all lineage based roms...video calls have audio distorted (too loud) and bad feedback from mic. Any fixes in the pipeline? Thanks again!
Click to expand...
Click to collapse
Can you please test this build:
Download aicp_instantnoodle_r-16.1-WEEKLY-20210307.zip from HERE
** Attempt to fix audio ssues.
If you are rooted: Just download the build to your device. Choose from AicpExtras -> Updater and flash after choosing from right upper corner.
If you aren't rooted:
1. go to recovery and flash via adb sideload and reboot.
All feeedbacks are appreciated.
semdoc said:
Can you please test this build:
Download aicp_instantnoodle_r-16.1-WEEKLY-20210307.zip from HERE
** Attempt to fix audio ssues.
If you are rooted: Just download the build to your device. Choose from AicpExtras -> Updater and flash after choosing from right upper corner.
If you aren't rooted:
1. go to recovery and flash via adb sideload and reboot.
All feeedbacks are appreciated.
Click to expand...
Click to collapse
Will update and report back accordingly. Thanks
passion8059 said:
Will update and report back accordingly. Thanks
Click to expand...
Click to collapse
Have tried video call today, mic seems to be fixed but on max volume (I have 2 young boys who won't be quiet ;-)) it still distorts so have to knock it down a bit and struggle to hear what is being said.
passion8059 said:
Have tried video call today, mic seems to be fixed but on max volume (I have 2 young boys who won't be quiet ;-)) it still distorts so have to knock it down a bit and struggle to hear what is being said.
Click to expand...
Click to collapse
LUK merged fixes for all 3 op8 devices today...
So you'll get test builds later today...
hello what interests me can we record the conversation natively?
doc411 said:
hello what interests me can we record the conversation natively?
Click to expand...
Click to collapse
Yes, we have that option in our Dialer.
semdoc said:
Yes, we have that option in our Dialer.
Click to expand...
Click to collapse
thank you very much for your quick rest
New build guys.
You can download aicp_instantnoodle_r-16.1-WEEKLY-20210309.zip from HERE.
-- Please test audio, calls - including whatsapp & telegram calls in all aspects..
-- OOS Style Clear all notificaitons button added
-- Kernel Update by Neutrino kernel dev.
Changelog: link HERE
Cheerz guys
Thanks for the update. Ringing at max is distorted still and there is a severe memory lag where you watch YouTube videos it'll play but then buffer then play again. I'm on a good broadband connection (500mb) and WiFi 6 coverage. Have cleared caches and used ex kernel manager to clear memory buffers but still the same.
hello everyone, im just new here with my redmi 6 with global rom and unlock bootloader. when i accidentally flash a different rom with it. and now my redmi 6 is stuck on MI-Recovery 3.0
is there anyone who can help me with this problem. please
attached below is a photo of my redmi 6.
thanks
Click reboot and immediately, at the exact instant that the screen is blank, start holding down Volume Down and Power buttons together for a couple of seconds.
You will be in fastboot mode.
Then download this file https://dl.google.com/developers/android/qt/images/gsi/vbmeta.img
Move this to your fastboot folder on PC.
In fastboot execute
fastboot --disable-verification flash vbmeta vbmeta.img
Then follow the steps to install a software called TWRP.
[RECOVERY][UNOFFICIAL] TWRP for Xiaomi Redmi 6 (cereus) by TWRPBuilder
TWRP Recovery 3.2.3-0 For Xiaomi Redmi 6 (cereus) by TWRPBuilder #include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed...
forum.xda-developers.com
Then install a custom operating system.
[ROM][UNOFFICIAL] Lineage OS 17.1
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from...
forum.xda-developers.com
Move the ROM zip to the phone.
Select wipe, then select factory reset. After success select flash then select your ROM zip(lineage-17.1-xxx.zip) and flash.
Then flash opengapps the same way( ARM64, Android 11, Pico)
The Open GApps Project
OpenGApps.org offers information and pre-built packages of The Open GApps Project. The Open GApps Project is an open-source effort to script the automatic generation of up-to-date Google Apps packages. All Android versions and platforms supported.
opengapps.org
Then reboot. Disable 'install twrp app'.
LR7875 said:
Click reboot and immediately, at the exact instant that the screen is blank, start holding down Volume Down and Power buttons together for a couple of seconds.
You will be in fastboot mode.
Then download this file https://dl.google.com/developers/android/qt/images/gsi/vbmeta.img
Move this to your fastboot folder on PC.
In fastboot execute
fastboot --disable-verification flash vbmeta vbmeta.img
Then follow the steps to install a software called TWRP.
[RECOVERY][UNOFFICIAL] TWRP for Xiaomi Redmi 6 (cereus) by TWRPBuilder
TWRP Recovery 3.2.3-0 For Xiaomi Redmi 6 (cereus) by TWRPBuilder #include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed...
forum.xda-developers.com
Then install a custom operating system.
[ROM][UNOFFICIAL] Lineage OS 17.1
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from...
forum.xda-developers.com
Move the ROM zip to the phone.
Select wipe, then select factory reset. After success select flash then select your ROM zip(lineage-17.1-xxx.zip) and flash.
Then flash opengapps the same way( ARM64, Android 11, Pico)
The Open GApps Project
OpenGApps.org offers information and pre-built packages of The Open GApps Project. The Open GApps Project is an open-source effort to script the automatic generation of up-to-date Google Apps packages. All Android versions and platforms supported.
opengapps.org
Then reboot. Disable 'install twrp app'.
Click to expand...
Click to collapse
thanks for this one sir. I will try this one and make an update later. Thanks and crossfinger
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Hi everyone i want to share a gsi vendor image that boots most Q and P roms for the samsung galaxy j4 core.
How to install:
reboot to twrp go to format data type yes *this will format all your data*
go back to wipe and select system,vendor,cache,data and dalvik then swipe to wipe
go to install click on install image select the gsi image file then swipe to flash
now select install zip and click on the vendor image you have downloaded and swipe to flash
finally you can flash gapps if your gsi doesn't include them *note: if you dont have enough space to install gapps to to wipe select system and select repair or change file system click on resize system then swipe to reisze*
and if you are into rooting flash magisk zip file
note try to not install gsi roms that aren't over 1.2gb lineageos 17.1 and dotos are prefered
BUGS:
none
What works:
-boots
-offline charging
-sound
-wifi
-gps
-bluetooth
-mtp
-RIL
if you want to report a bug be sure to include logcat
After this thread started to gain downloads, i decided pushed another update with improved peformance!
Download:
V2 Google drive: https://drive.google.com/file/d/1z-OrGTjv9HD9SL2j30EYyUA__xjmhIaR/view?usp=sharing
V1 Google drive: https://drive.google.com/file/d/14-XNmD_19Mt-dFSReBZk8luoeY2ZoD9r/view?usp=sharing
Credits:
@leohiper10 for the sources and allowing me to use his vendor image from his lineageos 16 build (doesnt use his vendor build anymore with V2).
myself for taking my time to test and fix the bugs
XDA: DevDB Information
Fggevhy Vendor for galaxy j4 core
ROM OS Version: 10 Q
ROM Kernel: Linux 3.x
ROM Firmware Required: latest bootloader and dtbo
Based On: Project Treble
Version Information
Status: Stable
Current Stable Version: V2.0
Current Beta Version: V2.0
Stable Release Date: 2021-11-08
Created 2021-09-20
Last Updated 2021-11-08
happy flashing!
Forgot to mention that the gsi image must be arm Aonly i will add that later
Changelog: 08/11/2021
-.img format instead of flashable zip
-Set screen density to 411
-Fixed pretty much all bugs in the older release
-Fixed Unknown baseband bug and unkown imei with old version on j410f
-Better peformance!
Changelog: 22/10/2021
-baked custom kernel onto it
-fixed call audio
-fixed crashing issue of qcrilmsg (responsable for ril)
-fixed wifi issue on j410F
-fixed dual sim on J410F/DS
How u fixed call audio ?
I tried flashing lineage and aosp. With both after going through the process, when I reboot system in twrp, it always reboots to download mode.
Device model: sm-j410f
NsovoXD said:
I tried flashing lineage and aosp. With both after going through the process, when I reboot system in twrp, it always reboots to download mode.
Device model: sm-j410f
Click to expand...
Click to collapse
try with orangefox
also if you have issues flash the first release of the vendor then update to v2
Has anyone tried this /vendor with a Lineage 18.1 GSI? Asking for a friend.
LegoLivesMatter said:
Has anyone tried this /vendor with a Lineage 18.1 GSI? Asking for a friend.
Click to expand...
Click to collapse
should work!