Related
Using a GSI on your shiny new A2 Lite? How have your experiences been? Which GSIs have you been using? Have some GSIs work better than others for the A2 Lite? If so, which?
I want this to be a thread for talking about people's experiences with using Project Treble's Generic System Images in the Xiaomi Mi A2 Lite.
Just to tide us over until there are proper, less "generic", ROMs being developed for this phone.
Tried the Pixel Experience 9.0 GSI, worked fine and all, but camera is not working, been wanting to try another one in the next few days.
Using latest PixelExperience P as daily driver, everything works fine (except Wifi-Hotspot). Got a semi-working Gcam port now, stock camera worked though it had few features. Mi a1 camera port magisk module works, too. All in all I have the feeling that our phone is well-suited for GSI flashing. So if you'd like too, go ahead and try some GSIs. Bricking should be rather hard, but in case of bootloop, just flash stock ROM through Xiaomi Flash tool (worked for me).
opal06 said:
Using latest PixelExperience P as daily driver, everything works fine (except Wifi-Hotspot).
Click to expand...
Click to collapse
How is the battery ?
I'm using hotspot almost everyday, guess I'll wait for another rom
Tayloro said:
How is the battery ?
I'm using hotspot almost everyday, guess I'll wait for another rom
Click to expand...
Click to collapse
Battery life is good, with normal usage (some browsing, some gaming and texting, few short calls and some videos) I get through the day with 50% battery left. I am using Googles AI battery optimization as well as Greenify Magisk module. Can't post screen shots from settings because those stats are wrong/not working correctly. I'm using BetterBatteryStats instead, which normally shows me average usage of ranging from 2.5 to 3 % per hour.
Edit: Wifi-hotspot not working seems to be a common bug for all GSIs based on phh's work (so, basically all). Probably, we'll have to wait for a custom ROM specifically made for A2 lite. I hope to see some soon!
My experience with gsi:
I tried the following roms. (now with links)
1) Pixel Experience Oreo: https://download.pixelexperience.org/treble_gsi/
- smooth
- everything works except hotspot
- nice rom but not enough customizations for me
- no rounded corners -> you will loose some info on both sides of statusbar
2) Beno-Rom: https://basketbuild.com/uploads/devs/yshalsager/GSI/Benzo/arm64-ab/benzorom-9-unofficial-20180920-ab-arm64.img.xz
- soo smooth
- everything works incl. hotspot except camera and flashlight -> it´s a pity becouse it´s a great rom!
- rounded corners and notch are recognized -> no lost info anywhere
- some other adjustments for gsi treble
- enough customizations especially for pie
3) Havoc 2.0 Pie: https://sourceforge.net/projects/havoc-os/files/arm64ab/
- booting only with twrp as boot kernel! Everything works except wifi (like on every rom, when booting from twrp)
- laggy (like every rom that boots with twrp as kernel)
-> we need a new twrp! Then we can enjoy havoc.
- tons of customizations, no problem with rounded corners.
4) AEX 5.5 - 5.8: https://androidfilehost.com/?w=files&flid=271118&sort_by=date&sort_dir=DESC
- fc ui -> interacting with phone nearly impossible. 2x pwr gesture opens camera and it works.
- Normally my favorite rom, especially becouse it offers rounded corners and the ajustment -> but there´s somthing wrong with that roms
-> it someone gets it running pleas pm me!
5) AEX 6 Pie: https://androidfilehost.com/?w=files&flid=271118&sort_by=date&sort_dir=DESC
- Everything works - even hotspot seems to work -> forgot to put in sim, but hotspot started...
- same sources and developer as AEX 5.x but this one works - strange....
- smooth and stable, but nearly no customizations right now
6) RR Oreo: https://sourceforge.net/projects/resurrectionremix-oreo/files/arm64ab/
- everything works
- smooth
- safetynet works after flashing universal safetynet fix
7) CrDroid Oreo: https://androidfilehost.com/?fid=5862345805528041177
- smooth and stable
- everything works, but safetynet not fixable -> flashing universal safetynetfix fixes device not certified but but still basic integrity false...
- even though safetynet not working, playstore and everything works normal
- my daily driver right now!
8) Arrow OS Pie: https://sourceforge.net/projects/arrow-os/files/arrow-9.x/GSI/
- everything exact like on Havoc Pie (3) - only less customizations
-> boots only laggy with twrp as kernel
Chears!
Voodoojonny said:
My experience with gsi:
I tried the following roms.
1) Pixel Experience Pie:
- smooth
- everything works except hotspot
- nice rom but not enough customizations for me
- no rounded corners -> you will loose some info on both sides of statusbar
2) Beno-Rom
- soo smooth
- everything works incl. hotspot except camera and flashlight -> it´s a pity becouse it´s a great rom!
- rounded corners and notch are recognized -> no lost info anywhere
- some other adjustments for gsi treble
- enough customizations especially for pie
3) Havoc 2.0 Pie
- not booting at all -> tried all kernels - no dm veryfy, no encryption, disabled encryption in vendor - idk.
4) AEX 5.5 - 5.8
- fc ui -> interacting with phone nearly impossible. 2x pwr gesture opens camera and it works.
- Normally my favorite rom, especially becouse it offers rounded corners and the ajustment -> but there´s somthing wrong with that roms
-> it someone gets it running pleas pm me!
5) AEX 6 Pie
- Everything works - even hotspot seems to work -> forgot to put in sim, but hotspot started...
- same sources and developer as AEX 5.x but this one works - strange....
- smooth and stable, but nearly no customizations right now
6) RR Oreo
- everything works
- smooth
- safetynet works after flashing universal safetynet fix
7) CrDroid Oreo
- smooth and stable
- everything works, but safetynet not fixable -> flashing universal safetynetfix fixes device not certified but but still basic integrity false...
- even though safetynet not working, playstore and everything works normal
- my daily driver right now!
Can someone share the original build.prop? There are entries about the notch and rounded corners. Perhaps some roms will respond to these entries.
Chears!
Click to expand...
Click to collapse
do you install all this rom by twrp unofficial?
Voodoojonny said:
Can someone share the original build.prop?
Click to expand...
Click to collapse
https://github.com/TadiT7/xiaomi_da...ODLMIFF-release-keys/system/system/build.prop
notthesun said:
do you install all this rom by twrp unofficial?
Click to expand...
Click to collapse
Only via fastboot! Changing to decrypt breaks wifi!
cpu004 said:
https://github.com/TadiT7/xiaomi_da...ODLMIFF-release-keys/system/system/build.prop
Click to expand...
Click to collapse
I did some testing with build.prop.
-> all data about notch and rounded corners are in the additional.prop
-> in original build.prop system.prop and additional.prop from /vendor are being importet. Importing them in Lineage´s build.prop leads to bootloop...
to roll back to stock is enough flash the stock system.img with fastboot?
Thanks!
Paolo
ilpolpi65 said:
to roll back to stock is enough flash the stock system.img with fastboot?
Thanks!
Paolo
Click to expand...
Click to collapse
Normally yes!
Voodoojonny said:
My experience with gsi:
I tried the following roms.
1) Pixel Experience Pie:
- smooth
- everything works except hotspot
- nice rom but not enough customizations for me
- no rounded corners -> you will loose some info on both sides of statusbar
2) Beno-Rom
- soo smooth
- everything works incl. hotspot except camera and flashlight -> it´s a pity becouse it´s a great rom!
- rounded corners and notch are recognized -> no lost info anywhere
- some other adjustments for gsi treble
- enough customizations especially for pie
3) Havoc 2.0 Pie
- not booting at all -> tried all kernels - no dm veryfy, no encryption, disabled encryption in vendor - idk.
4) AEX 5.5 - 5.8
- fc ui -> interacting with phone nearly impossible. 2x pwr gesture opens camera and it works.
- Normally my favorite rom, especially becouse it offers rounded corners and the ajustment -> but there´s somthing wrong with that roms
-> it someone gets it running pleas pm me!
5) AEX 6 Pie
- Everything works - even hotspot seems to work -> forgot to put in sim, but hotspot started...
- same sources and developer as AEX 5.x but this one works - strange....
- smooth and stable, but nearly no customizations right now
6) RR Oreo
- everything works
- smooth
- safetynet works after flashing universal safetynet fix
7) CrDroid Oreo
- smooth and stable
- everything works, but safetynet not fixable -> flashing universal safetynetfix fixes device not certified but but still basic integrity false...
- even though safetynet not working, playstore and everything works normal
- my daily driver right now!
Can someone share the original build.prop? There are entries about the notch and rounded corners. Perhaps some roms will respond to these entries.
Chears!
Click to expand...
Click to collapse
Hi,
I was using redmi note 3 pro before with latest RR rom. I'm kinda fan of RR.
Recently i bought mi A2 lite. And I'm new with this treble thing. And I want to use RR on this device. My phone is new and didn't do any tweaks yet. Not even unlock bootloader.
My humble request to u brother, can u guide me through for the first time how can I flash RR on it. after that I can mange further updates and other things.
Good wishes for u. And Thanks in advance.
GOD bless.
hasanzahir said:
Hi,
I was using redmi note 3 pro before with latest RR rom. I'm kinda fan of RR.
Recently i bought mi A2 lite. And I'm new with this treble thing. And I want to use RR on this device. My phone is new and didn't do any tweaks yet. Not even unlock bootloader.
My humble request to u brother, can u guide me through for the first time how can I flash RR on it. after that I can mange further updates and other things.
Good wishes for u. And Thanks in advance.
GOD bless.
Click to expand...
Click to collapse
Ok, let´s start:
Some words before starting:
RR treble runs perfectly. Good bb, everything works, incl. camera, wifi hotspot, etc.
But: becouse of the rounded corners of the display, some info of the statusbar gets lost - especially if you reduce ui-size -> I´m trying to find a solution!
Omni doen´t have this problems, but it has no gapps included and installing gapps without twrp is a pain in the ass!
-> finally I did it using twrp and after that reflashing stock recovery and format data with stock...
Treble Roms runs smoother and more stable with the july build. If you updated to august stock I would suggest to reflash 9.6.4.0 via miflash!
https://forum.xda-developers.com/mi-a2-lite/how-to/ota-v9-6-4-0-odlmiff-t3823913
Before starting, you shold root your kernel with this guide: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
1.) Download latest AB arm 64 gsi build: https://sourceforge.net/projects/resurrectionremix-oreo/files/arm64ab/system-180818-arm64-ab-gapps-su.img/download I would always use the gappsed version - twrp still not running for daisy...
2.) If you don´t have fastboot and adb download it from here: https://forum.xda-developers.com/showthread.php?t=2588979
3.) copy system-180818-arm64-ab-gapps-su.img to adb folder and rename it to system.img
4.a) Windows 7: right klick on white space in your adb-folder: open command prompt here
4.b) Windows 10: open command prompt and navigate to your adb folder
5.) Power off your Smartphone and press pwr and vol- together -> fastboot opens and connect your phone to your pc
6.) type in your command prompt fastboot oem unlock - Important: this will format your SD - All data will be lost If you perform that step! -> Backup before!
7.) Phone will reboot, erase data and boot up. Power off again after boot up. Power + vol- -> fastboot
8.) Type in your command prompt fastboot flash system system.img
Important: If you havn´t rooted your device via magisk before doing this, you have to follow the next steps too! if you are already rooted: fastboot reboot Violla
9.) Don´t reboot stay in fastboot and download a prerooted kernel from here: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952, copy the patched kernel into fastboot folder and type: fastboot boot patched_boot.img
10.) Now it boots up and tells you that your data is encrypted and can´t be read. At this point you can put in whatever you want. Then you get the message reset phone! Say yes!
11.) Your phone will boot up and erase data! While it´s doing this, press vol-, then your phone will boot after that into fastboot
12.) fastboot boot patched_boot.img. Now it should boot up normal and after setting up google you should reinstall magisk via magisk manager!
Violla - Now you have RR on your Mi A2 Lite!
Voodoojonny said:
Ok, let´s start:
Some words before starting:
RR treble runs perfectly. Good bb, everything works, incl. camera, wifi hotspot, etc.
But: becouse of the rounded corners of the display, some info of the statusbar gets lost - especially if you reduce ui-size -> I´m trying to find a solution!
Omni doen´t have this problems, but it has no gapps included and installing gapps without twrp is a pain in the ass!
-> finally I did it using twrp and after that reflashing stock recovery and format data with stock...
Treble Roms runs smoother and more stable with the july build. If you updated to august stock I would suggest to reflash 9.6.4.0 via miflash!
https://forum.xda-developers.com/mi-a2-lite/how-to/ota-v9-6-4-0-odlmiff-t3823913
1.) Download latest AB arm 64 gsi build: https://sourceforge.net/projects/re.../system-180818-arm64-ab-gapps-su.img/download I would always use the gappsed version - twrp still not running for daisy...
2.) If you don´t have fastboot and adb download it from here: https://forum.xda-developers.com/showthread.php?t=2588979
3.) copy system-180818-arm64-ab-gapps-su.img to adb folder and rename it to system.img
4.a) Windows 7: right klick on white space in your adb-folder: open command prompt here
4.b) Windows 10: open command prompt and navigate to your adb folder
5.) Power off your Smartphone and press pwr and vol- together -> fastboot opens and connect your phone to your pc
6.) type in your command prompt fastboot oem unlock - Important: this will format your SD - All data will be lost If you perform that step! -> Backup before!
7.) Phone will reboot, erase data and boot up. Power off again after boot up. Power + vol- -> fastboot
8.) Type in your command prompt fastboot flash system system.img
Violla - Now you have RR on your Mi A2 Lite!
Click to expand...
Click to collapse
You are so kind and generous brother. I'm trying now. Will keep u posted.
Thanks for ur time bro.
Update: @Voodoojonny brother, I did what u told me to do. after flash RR system image and reboot it bootlooped. like, it shows Android One screen for 3/4 min and then reboot again. any solution brother?
Thanks in advance
hasanzahir said:
You are so kind and generous brother. I'm trying now. Will keep u posted.
Thanks for ur time bro.
Update: @Voodoojonny brother, I did what u told me to do. after flash RR system image and reboot it bootlooped. like, it shows Android One screen for 3/4 min and then reboot again. any solution brother?
Thanks in advance
Click to expand...
Click to collapse
Oh sorry, I forgot something. I hope I didn´t brought you into trouble!
To boot into a gsi treble rom, you need a prerooted kernel! https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
You shold boot from a patched kernel and install root via magisk as discribed in the link above!
Sorry, I just forgot this point, idk why!
I edited the guide above! Please follow steps 9-12!
Voodoojonny said:
Oh sorry, I forgot something. I hope I didn´t brought you into trouble!
To boot into a gsi treble rom, you need a prerooted kernel! https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
You shold boot from a patched kernel and install root via magisk as discribed in the link above!
Sorry, I just forgot this point, idk why!
I edited the guide above! Please follow steps 9-12!
Click to expand...
Click to collapse
Thanks for ur reply brother. after doing so it shows a screen where it ask me to give password to start android. then I turned off my device and it start by itself and stuck on android one screen. trying to find way to do it right.
Update: I put password 1234 and it start and tell me reset phone. I click reset and keep vol- button and it boot up in fastboot. then I command fastboot boot patched_boot.img again and its boot up then dycripted my phone then reboot again and everything is fine now.
Thank U brother for ur kind help. GOD bless u.
Ok, I finally able to flash RR oreo on my A2 lite. Thanks to @Voodoojonny for his time and effort on me to achieve that. Here is my experience on this ROM.
Bootup fine. Everything works so far. Some annoyance though.
1. Rom can't recognise notch. So u will miss some information on status bar and can't customise that much. Because maximum items will coverup by notch.
2. In rom camera quality is very poor and almost no option there. I tried some other cameras from magisk but none is working. (Can anyone suggest me any good camera mod please?)
3. Notification light doesn't work while charging.
4. Can't remove the google widget from home screen which is kinda annoying. (Can anyone suggest me how to get rid off that please?)
5. Headphone not working. Can't recognise any headphone/earphone.
NB: 1. can anyone tell me how to update this rom since I don't have TWRP installed. Should I download the rom zip to pc and flash via fastboot or do I need to do anything more.
2. If I want to check any other GSI roms how is the procedure? Do I need to go back stock rom again and start from beginning or can I just flash via fastboot? Should I need to flash patched boot.img everytime? If that so then which version?
Thanks in advance. Peace.
hasanzahir said:
Ok, I finally able to flash RR oreo on my A2 lite. Thanks to @Voodoojonny for his time and effort on me to achieve that. Here is my experience on this ROM.
Bootup fine. Everything works so far. Some annoyance though.
1. Rom can't recognise notch. So u will miss some information on status bar and can't customise that much. Because maximum items will coverup by notch.
2. In rom camera quality is very poor and almost no option there. I tried some other cameras from magisk but none is working. (Can anyone suggest me any good camera mod please?)
3. Notification light doesn't work while charging.
4. Can't remove the google widget from home screen which is kinda annoying. (Can anyone suggest me how to get rid off that please?)
5. Headphone not working. Can't recognise any headphone/earphone.
NB: 1. can anyone tell me how to update this rom since I don't have TWRP installed. Should I download the rom zip to pc and flash via fastboot or do I need to do anything more.
2. If I want to check any other GSI roms how is the procedure? Do I need to go back stock rom again and start from beginning or can I just flash via fastboot? Should I need to flash patched boot.img everytime? If that so then which version?
Thanks in advance. Peace.
Click to expand...
Click to collapse
1. So far no solution! I`ve put the time to the left side of the statusbar so I don´t miss too much!
2. Install magisk module mi a2 camera and give the permissions manually via apps section. You will have a fully working camera with all options - everything is working!
3. I guess that´s not that big problem
4. use another launcher - evie is great!
5. that seems to be the biggest problem!
If there is a newer version of rr you can flash it via fastboot using fastboot flash system [imagename].img Boot.img is always the same. No need to reflash it!
For round corners try:
adb shell settings put secure sysui_rounded_size 26.0
adb shell settings put secure sysui_rounded_content_padding 8.0
DISCLAIMER
I am in no way responsible for dead sd cards, lost basebands, online or physical war or anything else for that matter last time i checked i couldnt warp through space and make you install it, rom is 100% tested and confirmed working.
DEVICE
Make Alcatel
Model Pixi 3 (4.5)
Model No 4027A
Kernel ver 3.4.67
Fs type eMMC + EXT4
ROM
Name LineageOS
Version 14.1
SDK ver 25
LineageAPI Guava(7)
NOTES
This build was compiled from MicroMax A102 sources and is using the stock untouched pixi 3.4.67 kernel please note that there may be the possibility of bugs
Manually Patched with LineageOS root 14.1, root management is in developer options.
Comes Preloaded with Gapps.
NOT WORKING
Video recording does not work i will look into seeing if i can get it fixed
FLASHING
Ideally use TWRP to install as the rom is set to use meta-data for permissions CWM does not support Meta-data.
1. Copy rom to your sd card.
2. Boot to TWRP.
3. Factory data reset.
4. Install LineageOS.zip.
5. Wipe cache/dalvik
6. Reboot
7. First boot should take no longer than 10 minutes to boot to the LineageOS Setup wizard.
LINK
LineageOS_14.1_MT6572_PIXI_3_4027A
https://drive.google.com/file/d/1Dw8Vj_4yYcba-lbxsH4irY1qOMWFtdmP/view?usp=drivesdk
Welcome to lineage os 14.1 pixi 4027a
Ok
The fact that this ran on 3.4.67 is what drove me into believing that getting the LeapFrog Epic to run at least Lollipop is possible.
Matty1993 said:
Welcome to lineage os 14.1 pixi 4027a
Click to expand...
Click to collapse
hello I already installed the rom bro but my network goes out E how can I put it 3G PLEASE
Bugs
1. Flashlight (Camera and System)
2. Notifications light
3. Mobile Data (comes out with data [E])
4. Noce I can play videos in Gallery and in Files
DjDragon102018 said:
Bugs
1. Flashlight (Camera and System)
2. Notifications light
3. Mobile Data (comes out with data [E])
4. Noce I can play videos in Gallery and in Files
Click to expand...
Click to collapse
Sorry for late reply phones been busted so havent been able to login,
Right hmmm strange that is what country are you in and also network provider if you could provide that info just to rule out your network provider as i get 3g data reception in australia here but ill look intothe ril see if i cant tweak it and see about an update to fix the other stuff to probably next week sometime.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is AOSP?
AOSP (Android Open Source Project) is Android just as Google publishes, without any other modifications or additions. More or less AOSP is the Pixel devices stock ROM without gapps and proprietary additions. Check out the screenshots to know more!
What's working?
Boots
RIL (Calls, SMS)
Mobile data
Bluetooth
WiFi/hotspot
Media (audio/video)
Camera
Camcorder
GPS
Fingerprint
NFC
Sensors
etc.
Bugs?
BT CALLS/voWiFi/voLTE
How to install?
Wipe system, data, dalvik's cache and cache Do not wipe vendor
TWRP:Install > select Image > select if they ask "system" select System and then the AOSP_A40......Image > install
Ofox: Tap on the Image > As system image
Reboot recovery
Flash Gapps
reboot system
Enjoy the goodness of Android 11.
Downloads
ROM: AOSP_VANILLA_STOCK_A40_R [Systemimage only]
Screenshots
Attachment
Sources
https://github.com/aosp-mirror
NOTE: For reporting any bugs, describe the issue properly and make sure to accompany it with a logcat. Without a logcat, bugs cannot and will not be fixed.
Don't forget to hit the thanks button to show love and support my work.
XDAevDB Information
AOSP 11.0, ROM for the Samsung Galaxy A40
Contributors
Kevios12
Source Code: Kernel Tree
ROM OS Version: 11.0.0
ROM Kernel: Linux 4.x
ROM Firmware Required: OneUI 2.0 or ALT+F4
Based On: AOSP
Version Information
Status: Stable
Created 2021-04-30
Last Updated xxxx-xx-xx
(Based On: AOSP) Roms unfortunately do not have the option to make sim2 passive while sim1 is active (or vice versa). Is there a solution to this?
I have installed the ROM with TWRP and my phone is now bricked, I cannot even get into TWRP anymore. Any idea what I could do now?
- Install order was: Unlocked bootloader, used Odin to install TWRP, flashed Multidisabler, reboot, then followed the instructions here
- Black screen followed the "reboot" button in TWRP
- I can reboot the phone by pressing all three buttons but this will only give me the Samsung warning I have to confirm and then black screen again
- this phone uses Exynos CPUs
- OneUI 3.1 was installed before. Is that the issue? I read "Firmware required" as "Minimum Firmware required"...
Edit: I can NOT reboot the phone while a USB cable is plugged in.
Yes OneUI 2.0 is required. OneUI3 FW is GAY! And you can go instand to twrp by pressing power + vol - then if restart hold power+vol+ if samsung logo come, release powerbutton and wait. Have u the A40 for sure? the rom is testet and works, nobody has a brick or whatever. Flash This image as system_image only no wipe vendor or everything btw. look in other treads for my custom vendor it will works.
kevios12 said:
Yes OneUI 2.0 is required. OneUI3 FW is GAY!
Click to expand...
Click to collapse
So I managed to flash OneUI 2.0 and then repeated the whole process and now your ROM boots. I can't connect to WIFI though (yes I made sure I used the correct password). It just says "connecting failed". Also, when I call someone, there is no call window. Is this ROM compatible with FlameGApps?
Also, yes, definitely the A40.
only u can Try gapps idk if flame works. did u use WPA2/3? combinied
My router uses WPA2/3 combined and Android does not give me an option.
I was now able to connect to another Wifi and tried to update my apps. It tells me I had not enough space. But I have over 50 GB free.
Edit: So, the Wifi problem depends on encryption. WPA+WPA2 works, WPA2+WPA3 does not work. I think that is a bug.
Also, I cannot get Play Store to install anything. It always complains about not enough space despite me having no apps installed and lots of free space on both internal and external memory. Cleaning cache did not help. This happens with both NikGapps and FlameGApps. FlameGApps works way better though.
Also explaine better, it should work maybe bug of gapps
I tried the rom , but it’s stuck on the android logo , any help?
Have u installed vendor? ... the custom one
kevios12 said:
Also explaine better, it should work maybe bug of gapps
Click to expand...
Click to collapse
Possible, but I do not know. Might also be partitioning. I did nothing but flash ROM and flash Gapps, then boot and run through the Gapps initial setup tool that automatically started (connect wifi etc). Then I tried to install any app from the Play Store. It always says I need to free up space before I can install an app. But I have lots of space, tens of GB.
hmm thats weird
It is weird indeed... also, are there known issues with phone calls with a Bluetooth headset? I couldn't use mine today, even though it was properly connected.
kevios12 said:
Have u installed vendor? ... the custom one
Click to expand...
Click to collapse
I did
CozmoGM said:
I did
Click to expand...
Click to collapse
Nevermind , i think i did something wrong , but i reflashed the rom and everything and now it works.
Konzertheld said:
It is weird indeed... also, are there known issues with phone calls with a Bluetooth headset? I couldn't use mine today, even though it was properly connected.
Click to expand...
Click to collapse
known bug, like voLTE/voWIFI/BT CALLS BUG/EXYNOS WONT WORK
kevios12 said:
known bug
Click to expand...
Click to collapse
So... please put that in your description above instead of stating "bugs: none". Other ROMs named the bug with Bluetooth etc and yours didn't, so I assumed it was not relevant. I would not have downloaded it if I knew.
Konzertheld said:
So... please put that in your description above instead of stating "bugs: none". Other ROMs named the bug with Bluetooth etc and yours didn't, so I assumed it was not relevant. I would not have downloaded it if I knew.
Click to expand...
Click to collapse
Well the problem is when you are developer & tester at the same time, because nobody feels like doing it, or you really do everything alone ... mistakes can happen!
Important information:
This thread is for LineageOS 18.1 opensource builds for OPPO A57. The following will not be supported in this thread:
Custom Kernels
Mods
Modified system files
Xposed
Magisk
What's not working:
Home button (including Fingerprint)
Empty IMEI
Camera (including Flashlight)
Sensors
WiFi (MAC address and WiFi 5)
probably more
Installation:
If you are on the stock OS, you will first need a custom recovery. You can get the recommended Lineage recovery here.
If you are coming from stock or other ROMs, you need to do a factory reset.
As always, make sure to backup before installing this ROM.
Download link:
SourceForge
Recommended Google Apps package:
MindTheGapps
Bug reports:
How to submit a bug report
Gitlab Issues
Donate to support development:
Donate via PayPal to Ricky
Donate via PayPal to LineageOS
Source Code:
Device tree
Kernel
LineageOS Github
Contributors
@tipzrickycheung, Lineage Team
ROM OS Version: 11.x R
ROM Kernel: Linux 3.18.x
ROM Firmware Required:
Based On: LineageOS
Reserved.
Interesting don't worry these pics belong to tipZ team
Been waiting. Always ready for testing
And just be sure, it doesn't need unlocked bootloader, right?
impawstarlight said:
Been waiting. Always ready for testing
And just be sure, it doesn't need unlocked bootloader, right?
Click to expand...
Click to collapse
Nah, this phone doesn't even support unlocking.
I tried it yesterday but it went black screen right after booting (after playing bootanimation for like 5 minutes). It seemed to be powered on but the screen was totally like off. And adb logcat was crazy with error messages like java exceptions & avc denied read/write etc. Gonna try again today since I forgot to screenshot it.
Attempt 2
# Was using stock firmware
# Installed TWRP 3.6.0_9-2 with MiFlash 2020.3.14.0
# Allowed system modification at TWRP startup
# Wiped data, dalvik/art, cache
# Installed ROM, no error in TWRP
# Rebooting: bootanimation plays, 180 degree rotated
# Black screen. But screen is actually on
# Phone connects to PC only in adb mode, no MTP
# Screen sharing to PC, still black
# Rebooting doesn't help, and the bootanimation takes like 5 mins every time
Here's some logcat.
impawstarlight said:
Attempt 2
# Was using stock firmware
# Installed TWRP 3.6.0_9-2 with MiFlash 2020.3.14.0
# Allowed system modification at TWRP startup
# Wiped data, dalvik/art, cache
# Installed ROM, no error in TWRP
# Rebooting: bootanimation plays, 180 degree rotated
# Black screen. But screen is actually on
# Phone connects to PC only in adb mode, no MTP
# Screen sharing to PC, still black
# Rebooting doesn't help, and the bootanimation takes like 5 mins every time
Here's some logcat.
Click to expand...
Click to collapse
Hey...
You should text it in his telegram group.
Oppo A57 / R9s (2016) Community
You can view and join @OppoA57R9sCommunity right away.
t.me
impawstarlight said:
Attempt 2
# Was using stock firmware
# Installed TWRP 3.6.0_9-2 with MiFlash 2020.3.14.0
# Allowed system modification at TWRP startup
# Wiped data, dalvik/art, cache
# Installed ROM, no error in TWRP
# Rebooting: bootanimation plays, 180 degree rotated
# Black screen. But screen is actually on
# Phone connects to PC only in adb mode, no MTP
# Screen sharing to PC, still black
# Rebooting doesn't help, and the bootanimation takes like 5 mins every time
Here's some logcat.
Click to expand...
Click to collapse
This phone is a bit weird that the screen likes rotating on different variants of the phones, very nicely done, OPPO.
It will take a while to boot after the boot animation stops as it is loading SystemUI, you can try to format userdata as encryption seems to be dead currently.
tipzrickycheung said:
This phone is a bit weird that the screen likes rotating on different variants of the phones, very nicely done, OPPO.
It will take a while to boot after the boot animation stops as it is loading SystemUI, you can try to format userdata as encryption seems to be dead currently.
Click to expand...
Click to collapse
how i can install this kernel?
I have same problem
I see in twrp this rom have 2 system but I'm remove 1 system even make it not work
Bollim said:
how i can install this kernel?
I have same problem
Click to expand...
Click to collapse
You have to FORMAT DATA and type yes. The option is present by the side of advanced wipe. It is going to format your internal storage, so you have to flash it with SD card or otg
Successfully booted LOS 18.1
Cipher07 said:
Successfully booted LOS 18.1
Click to expand...
Click to collapse
Hello,
Please excuse me but does calling and camera work fine? Also does audio, wifi home button work? Please reply!
Sheikhti said:
Hello,
Please excuse me but does calling and camera work fine? Also does audio, wifi home button work? Please reply!
Click to expand...
Click to collapse
"No calling" because no imei, camera is also not working, audio is not implemented so "no audio", "wifi works", home button is also not working. Sed. There is no fix for above and not coming anytime soon. Maybe after two to three years. RIP this phone
New Update
20220522
Fixed Audio (speakers, microphones, earpiece, line out)
Fixed adsprpcd
Fixed SIM card detection and some capabilities
Download
tipzrickycheung said:
New Update
20220522
Fixed Audio (speakers, microphones, earpiece, line out)
Fixed adsprpcd
Fixed SIM card detection and some capability
Click to expand...
Click to collapse
Is simcard working now?
New Update
20220526
Cleaned up init scripts
Enabled ZRAM
Fixed Encryption
Enabled Sound Trigger
Download
tipzrickycheung said:
New Update
20220526
Cleaned up init scripts
Enabled ZRAM
Fixed Encryption
Enabled Sound Trigger
Download
Click to expand...
Click to collapse
SimCard Working?
TELEGRAM CHANNEL ADDED: HERE
TELEGRAM CHAT GROUP: HERE
I normally build roms for Oneplus devices, but one of Xperia users donated and asked to build for Xperia XA2 Ultra. XA2 Ultra doesn't have a lot of options, so, here it is:
I have been building Android roms since 2012 for various devices including multiple Sonys, Lenovo Zuk, Oneplus 3, Oneplus 5, 6, 8 and 9. You can check my Oneplus 6 or Oneplus 6T or Oneplus 8 threads and browse my profile.
Jaguar rom is focused on hardening of AndroidOS and kernel. As such, the rom has hardened bionic, art, framework and tightened security.
1 Rom control with custom Power options, Statusbar, Buttons, Navbar, Quicksettings, Lockscreen, Notifications, Gestures, Themes etc...
2. Heavily modified Art, Bionic System/Vold and System/Security
3. Telephony response to Type Zero sms ('silently acknowledged') disabled
4. Toggle to disable Captive Portal logging.
5. Speakerphone proximity sensor toggle - could be set to automatically switch to speaker when not at the ear
6. IMEI and phone numbers hidden in About menu
7. Built-in encrypted DNS providers, such as: Cloudflare (US); LibreDns (Germany); AdguardDns (Cyprus); and PowerDns (Netherlands)
8. Wakelock and Alarmblocker
9. Fully working Call recording with the button visible in Dialer
10. Deskclock app modified to work with PowerOn alarm. The app will boot the phone 2 minutes before scheduled time to trigger the alarm on time
11. Default Dark mode
12. All regular customizations plus. You tell me which feature is missing.
The rom has 2 versions Vanilla (no Gapps) and Full. So, pick according to your needs.
Install instructions
Xperia AX2 Ultra is somewhat easier to deal with (because it doesn't have virtual partitions). So, the only requirement is to be on the latest stock firmware in both slots, and unlocked bootloader, of course. If you have been using Lineageos 18-19, you already have it. If not, install stock and then use Lineage's copy-partitions zip to populate another slot.
1. Either boot official TWRP and flash the rom followed by factory reset, or boot my recovery and sideload the rom also followed by factory reset.:
The command to boot recovery (from fastboot) is simple:
fastboot boot 'recovery name' (without quotes).
The first boot might take longer, because your phone will be encrypted.
2. Magisk: only versions 24.3 and higher will pass Safetynet. However, don't use TWRP, or any other recovery, because you won't boot. Rather install Magisk as a regular app, take boot.img I provide (the same as recovery), put it on your internal storage and patch from the app. Then install the new image (Magisk will tell you where it would save it) via fastboot: fastboot flash boot boot.img.
Download rom V20.2-VANILLA: Here
Download rom V20.2-FULL: Here
Download recovery (same as boot.img): Here
All subsequent releases will be in post #3.
XDAevDB Information
JAGUAR R, ROM for Sony Xperia AX2 Ultra
Contributors
optimumpro
Kernel Source Code (for now Lineage kernel): Here
ROM OS Version: 11.x R
ROM Kernel: Linux 4.x
ROM Firmware Required: no lower than Android 11 + unlocked bootloader
Based On: AOSP/Lineage/DirtyUnicorn/Crdroid
Version Information
Status: Stable
Current Stable Version: See post #3
Stable Release Date: 2021-01-26
Created: 2021-01-29
Updated: 2022-10-18
Credit: AOSP, Lineage, DU, Crdroid, GrapheneOS, CalyxOS
Why not Android 12? Because Google's major new releases don't become stable until at least r50+. Why? Ask Google. My view is: their primary focus is on advertising revenue, hence, everything else is on the back burner.
In addition, I personally dislike Android 12 (12L): you get some minor UI changes in exchange for giving up more privacy..
Screenshots: see Here
Magisk 25 and LSposed are loading now.
October 18. New release V025:
1. October security patches
2. Android r60
3. System webview to 106.x
4. Ability to disable screenshots saving: when disabled, screenshots are taken, but not saved
Native video still doesn't work and probably will never work due to the phone's low ram
Dirty flashing is fine on a previous release
Download rom V25 VANILLA: Here
Download rom V25 FULL: Here
September 13. New release V-24: major update
1. September security patches
2. Android r59
3.Ability to change clock size in statusbar and quicksettings
4. Rom is now compatible with Magisk 25 and Lsposed
5. AOD is fully working
6. DIaler: toggle for post-call snackbar
7. System webview to 105.x
Native gallery still cannot play videos and probably won't ever, as Jaguar takes more ram than Lineage: XA's 4GB of RAM is simply not enough. Use VLC player, which works fine.
Download rom V24-VANILLA: Here
Download rom V24-FULL: Here
August 21. New release V-23
1. August security patches
2. Android r58
3. Video playing may or may not be fixed (no longer have the device)
Dirty flashing is fine on a previous release
Download rom V-23 VANILLA: Here
Download rom V-23 FULL: Here
July 8. New release V-22
1. July security patches
2. Android r57
3. Automatic sleep/suspend mode (scheduled by a user) in Settings/Battery
4. 'Internet permission missing' issue with several apps fixed. Now, all apps including Googleplay, as well as third party apps, have no problems connecting to the internet (no F/C)
5. Many under the hood improvements
Dirty flashing on top of a previous release is fine. Otherwise, clean flash.
Download rom V-22 FULL: Here
Download rom V-22 VANILLA: Here
Does miracast work in this rom, and when mirroring could it black/turn off the screen. This is possible with the stock firmware and i hope that its also possible with the jaguar rom.
July 8. New release V-22
1. July security patches
2. Android r57
3. Automatic sleep/suspend mode (scheduled by a user) in Settings/Battery
4. 'Internet permission missing' issue with several apps fixed. Now, all apps including Googleplay, as well as third party apps, have no problems connecting to the internet (no F/C)
5. Many under the hood improvements
Download in post #3.
Newpipe does not work and possibly other videoplayback applications, doesn 't work in the browser . Only YouTube video plays. And could you integrate audio boost Ainur narsil, Viper or Sound Enhancement Sony Xperia 10 and then magisk is not needed
TheStormRanger said:
Newpipe does not work and possibly other videoplayback applications, doesn 't work in the browser . Only YouTube video plays. And could you integrate audio boost Ainur narsil, Viper or Sound Enhancement Sony Xperia 10 and then magisk is not needed
Click to expand...
Click to collapse
That's because you are using MicroG and you have NOT enabled 'signature spoofing' in Settings/Privacy. Most Google apps will NOT work with MicroG, unless signature spoofing is enabled.
optimumpro said:
That's because you are using MicroG and you have NOT enabled 'signature spoofing' in Settings/Privacy. Most Google apps will NOT work with MicroG, unless signature spoofing is enabled.
Click to expand...
Click to collapse
I am using the full version 22. Everything is already installed there. Changing the settings doesn't help. Newpipe and other software always work without Google services and MicroG. It's sad that not all software works. Your firmware is good, including Bluetooth and security tweaks
TheStormRanger said:
I am using the full version 22. Everything is already installed there. Changing the settings doesn't help. Newpipe and other software always work without Google services and MicroG. It's sad that not all software works. Your firmware is good, including Bluetooth and security tweaks
Click to expand...
Click to collapse
The same for me. Video playback doesn't work. I don't have microg installed. Even the video stored on the phone, or the video recorded with the camera doesn't work. Other than that, everything seems to be working great.
Sorry for my English...
My problem is cannot use Video Playing (From Facebook and other app)
If I play video , it show only black screen . How to fix it
[email protected] said:
Sorry for my English...
My problem is cannot use Video Playing (From Facebook and other app)
If I play video , it show only black screen . How to fix it
TheStormRanger said:
I am using the full version 22. Everything is already installed there. Changing the settings doesn't help. Newpipe and other software always work without Google services and MicroG. It's sad that not all software works. Your firmware is good, including Bluetooth and security tweaks
Click to expand...
Click to collapse
branja6 said:
The same for me. Video playback doesn't work. I don't have microg installed. Even the video stored on the phone, or the video recorded with the camera doesn't work. Other than that, everything seems to be working great.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
One of you would have to post a logcat running when you are trying to play videos.
optimumpro said:
One of you would have to post a logcat running when you are trying to play videos.
Click to expand...
Click to collapse
Ok, I installed a clean V22 full and a Newpipe app. And I attach the logcat. Newpipe works fine on the original firmware and Lineage and others
branja6 said:
The same for me. Video playback doesn't work. I don't have microg installed. Even the video stored on the phone, or the video recorded with the camera doesn't work. Other than that, everything seems to be working great.
Click to expand...
Click to collapse
So far the workaround to an extent is using VLC media player, so this may be some type of codec issue... Hopefully it can be resolved soon
August 21. New release V-23
1. August security patches
2. Android r58
3. Video playing may or may not be fixed (no longer have the device)
Download in post #3.
How long is the first load? I feel like it's been loading for a long time now. At least 10 minutes. Installed in twrp the latest version, was coming from stock 8. Didn't read I needed firmware 11+ until just now. Do I just wait for the phone battery to die and try again? I had planned on installing Magisk after boot, but at this point I'm not sure it is even going to boot.
rjdeleon said:
How long is the first load? I feel like it's been loading for a long time now. At least 10 minutes. Installed in twrp the latest version, was coming from stock 8. Didn't read I needed firmware 11+ until just now. Do I just wait for the phone battery to die and try again? I had planned on installing Magisk after boot, but at this point I'm not sure it is even going to boot.
Click to expand...
Click to collapse
You can always shutdown the phone by pressing 'power key' and 'volume up and down' together for 5-10 seconds.
TWRP doesn't flash well and certainly doesn't work when flashing Magisk (you'll get bootloop).
Don't use V23. Use V22. Get recovery from post #1 and flash it in fastboot like this:
fastboot flash boot_a boot.img
then
fastboot flash boot_b boot.img
Disconnect the phone and start it in recovery by pressing 'power button' and 'volume down' at the same time. Once in recovery, wipe system, then side load V22.
optimumpro said:
You can always shutdown the phone by pressing 'power key' and 'volume up and down' together for 5-10 seconds.
TWRP doesn't flash well and certainly doesn't work when flashing Magisk (you'll get bootloop).
Don't use V23. Use V22. Get recovery from post #1 and flash it in fastboot like this:
fastboot flash boot_a boot.img
then
fastboot flash boot_b boot.img
Disconnect the phone and start it in recovery by pressing 'power button' and 'volume down' at the same time. Once in recovery, wipe system, then side load V22.
Click to expand...
Click to collapse
Thank you, in recovery now about to sideload the V22, then I will reboot into the system and then reboot into recovery and sideload the V23 on top. Should I install Magisk before the V23? Or just go straight into V22 to V23? Again, thank you for responding.
rjdeleon said:
Thank you, in recovery now about to sideload the V22, then I will reboot into the system and then reboot into recovery and sideload the V23 on top. Should I install Magisk before the V23? Or just go straight into V22 to V23? Again, thank you for responding.
Click to expand...
Click to collapse
Don't use v23. I will post v24 tomorrow. I described how to apply Magisk in the OP.
ugh, unfortunately cannot sideload to it for some reason:
adb: sideload connection failed: no devices/emulators found
adb: trying pre-KitKat sideload method...
adb: pre-KitKat sideload connection failed: no devices/emulators found
I am in ADB Sideload though so who knows, maybe I need to switch computers.
rjdeleon said:
ugh, unfortunately cannot sideload to it for some reason:
adb: sideload connection failed: no devices/emulators found
adb: trying pre-KitKat sideload method...
adb: pre-KitKat sideload connection failed: no devices/emulators found
I am in ADB Sideload though so who knows, maybe I need to switch computers.
Click to expand...
Click to collapse
That means there is no connection between your phone and pc. May be adb drivers etc. Try to open the terminal as administrator.