Dear members,
Screen was broken, and I changed it carefully. Unfortunately when I assembled everything back i discovered that my front camera dosen't flop out. I tried to move it by hand and the camera works good. But mechanic motor, that should flop front camera out, doesn't work. My question If will I change only the motor it will solve it (mean may be any other part that can cause this fault). Otherwise maybe you know any other solution before changing motor.
This is a part:
Motor Camera Frontal Engrenagem Motorola Moto One Hyper ( Xt2027-1 )
Smarts Parts. Fornecedor das melhores peças e acessórios para a sua Assistência Técnica.
www.smartsparts.com.br
Thank in advance,
Dima
Related
hallo
i need to replace my front speaker in my mda compact
do you know if any phone has same or almoust the same front speaker?
what dimmension has our front speaker?
thanks a lot
arek
hai dood
its same nokia 3100,3200
If u had a front camera from a titan can you put it in the arrive?? I only ask because my rom comes with front cam driver and i want to put it to use
That would be a very interesting and cool project. I'd love to see pics if you decide to try but I'd have to guess the different hardware would make it impossible for a regular Joe.
My assumption is that there aren't any contacts to attach the camera.....but I haven't studied the phone motherboard.
That being said, you could probably install a second camera on the same circuits as the rear camera and have some sort of manual switch......tricky surgery on your phone, but not out of the realm of possibility for someone who can solder.
A front camera, a removable micro-sd, and a 4.7" screen, which comes the last, are all what I wanted. Now maybe the gyro sensor to make it the perfect blend. We sprint SERO, so stuck.
I have a Doogee DG300 Voyager and there is a problem with the front camera. It is not enabled and I want to enable it
The bootloader is in Chinese and I couldn't understand much except when I was on the camera tests the back cam was all ready but the front cam had a message "not tested". I don't know what I should actually do or what should I search for. I need directions of some short.
Help someone for crying out loud ffs
have you tried actually using the camera app and switching to the front camera?
Hi all,
several days ago I noticed that the camera of my Mate 9 (MHA-L09C432) is not focusing.
Then I saw at this this thread that the camera module could be shifted.
Because the focus is working in properly in b/w mode I gave it a try.
Today I disassembled my phone (which was not easy) and saw that the bottom part of the dual camera module was slipped out of the fixture for 1-2mm.
After correcting this problem, cleaning the lenses and reassembling the phone I am now able to focus on objects in a range of about 1m again. But if the camera is not parallel to the object it is very difficult to focus...
But the main problem is, that i am not able to focus on an object which is more than 1m away... The object is always blurry and when i choose manual focus I am already on the maximum of the focus range...
In b/w mode everything works perfectly fine!
I cant see any impurities on the color-lens...
Does anybody have similar issues? What could be done to solve this problem? Could a new camera module solve this problem?
Thank you for any help in advance!
I fixed this problem by replacing the entire camera module.
I tried several things but only this solved the problem...
I do have the same problem exactly
So you probably have to replace your camera module...
The Mate 9 is not so easy to open up...
htcdesire-hd said:
So you probably have to replace your camera module...
The Mate 9 is not so easy to open up...
Click to expand...
Click to collapse
I replaced camera module, and it worked for a few days then the same issue returned. It will focus close up (-+ 1m distance) but far distance 3m to infinity will be out of focus. I can get the camera to refocus correctly (sometimes!) by sharply slapping the phone display face down onto the palm of my hand. It only works face down.
This happens with origin camera lens and replacement lens I installed.
I guess my only solution to have a working color camera on a phone is to buy a new phone that isn't made by Huawei, as a search of Internet suggests it isn't just Mate9 model that has this problem??
palatkik said:
I replaced camera module, and it worked for a few days then the same issue returned. It will focus close up (-+ 1m distance) but far distance 3m to infinity will be out of focus. I can get the camera to refocus correctly (sometimes!) by sharply slapping the phone display face down onto the palm of my hand. It only works face down.
This happens with origin camera lens and replacement lens I installed.
I guess my only solution to have a working color camera on a phone is to buy a new phone that isn't made by Huawei, as a search of Internet suggests it isn't just Mate9 model that has this problem??
Click to expand...
Click to collapse
Sounds like your camera is slipping inside the bracket... I revented this problem by pressing the camera module in place and carefully fixing it with hot glue... Don't block the autofocus or the lens with hot glue. Only a very thin layer from the edge of the camera case to the bracket is required.
htcdesire-hd said:
Sounds like your camera is slipping inside the bracket... I revented this problem by pressing the camera module in place and carefully fixing it with hot glue... Don't block the autofocus or the lens with hot glue. Only a very thin layer from the edge of the camera case to the bracket is required.
Click to expand...
Click to collapse
Thanks for feedback, I will try again to install the camera more securely.
htcdesire-hd said:
Sounds like your camera is slipping inside the bracket... I revented this problem by pressing the camera module in place and carefully fixing it with hot glue... Don't block the autofocus or the lens with hot glue. Only a very thin layer from the edge of the camera case to the bracket is required.
Click to expand...
Click to collapse
I tried fixing the camera in the 'bracket' as you say - by glueing it down. Its just a space on the board it fits into, so I'm not sure about any bracket. I have now tried it with two camera modules (the original and a replacement I bought). Both cameras give the same unfocused result on anything more than 1-2 m away. Strangely on scenic shots some parts of the shot are in focus whilst most of the scene is out of focus. The front camera and monochrome camera are OK. The aperture option on the color camera doesn't work at all, if I try and edit depth of field after taking photo it has no effect. There's also a setting in the camera app to restore defaults, which has no effect also.
Hey! im facing an issue. I replaced the motherboard with new one and the flir camera doesnt work on the new pcb and the camera works on the old pcb. So is the camera paired/linked to the pcb? So is there a way to flash the old camera information to the new pcb? i tryed again with the old pcb and it works.
interested in this question as well , any solution?