Hello everyone. I already wrote this message before but somehow it didn't post.
The problem:
After a software update with Odin, the GPS does not lock on to satellites. It finds them faster than before, but doesn't lock
After seeing this, I've tried multiple software versions (KE 7/8/4 etc - 500 mb+ files) Still the same. Even tried hard reset.
Played around with lbslabtests when I used these versions. No change there helped.
What should I do?
ArtoriusC said:
Hello everyone. I already wrote this message before but somehow it didn't post.
The problem:
After a software update with Odin, the GPS does not lock on to satellites. It finds them faster than before, but doesn't lock
After seeing this, I've tried multiple software versions (KE 7/8/4 etc - 500 mb+ files) Still the same. Even tried hard reset.
Played around with lbslabtests when I used these versions. No change there helped.
What should I do?
Click to expand...
Click to collapse
Flash latest radio?
and how do i do that an where can i get a radio image?
Hello.
I am also having exactly the same problem. I've flashed mine with LR 6.0, then GPS cant lock anymore. LR 6.1 still gives the same condition.
How to fix this?
I accidentaly flashed the edge version of twrp to my regular s6, 920r4. Now my touchscreen is reversed along the xaxis. When I dial *#2663#, nothing happens, only a dialtone goes on. Any suggestions?
Reflash regular S6 5.1.1 stock ROM via odin.
I did that, still no fix. Then I did a full reset, no fix.
Bring your S6 back to Samsung for repair.
roydok said:
Bring your S6 back to Samsung for repair.
Click to expand...
Click to collapse
Obviously my knox is tripped after flashing TWRP, would samsung be able to fix this anyway?
I hope so...
In other related threads, members were able to use the "secret codes" to update the TSP firmware. Could I perhaps install say the firmware for the 920F, then access the secret codes on that firmware, and in that process update the TSP firmware?
Flash this S6 regular S920R4 5.1.1 stock ROM instead of G920F:
http://www.sammobile.com/firmwares/download/48614/G920R4TYU2BOF7_G920R4USC2BOF7_USC/
Posting this for future reference for anyone that comes across this issue. The instructions below resolved my reversed issue.
@ScottBroker - If that happens again, you will not need to exchange your device. In the dialer, input *#2663# and select the "TSP FW update (General)". In order to do this, you would have to actually press "TSP FW update (Internal Storage)" since your horizontal touch is reversed.
This did not do anything for me. Could i just use the right one instead and all should go well? or there be another solution?
lagvoid said:
Posting this for future reference for anyone that comes across this issue. The instructions below resolved my reversed issue.
@ScottBroker - If that happens again, you will not need to exchange your device. In the dialer, input *#2663# and select the "TSP FW update (General)". In order to do this, you would have to actually press "TSP FW update (Internal Storage)" since your horizontal touch is reversed.
Click to expand...
Click to collapse
I finally got this issue fixed after almost half a year. I updated the firmware to a newer version, using the software update on the phone. My issue is finally fixed. I think that perhaps the several months new software update was different enough to require a complete changing of the recovery software.
Or at least something like that!
No longer will I be using my old s4, running liquidsmooth, that restarts 3-4 times a day. With a shattered screen at that!
Resurrecting the Thread
lagvoid said:
Posting this for future reference for anyone that comes across this issue. The instructions below resolved my reversed issue.
@ScottBroker - If that happens again, you will not need to exchange your device. In the dialer, input *#2663# and select the "TSP FW update (General)". In order to do this, you would have to actually press "TSP FW update (Internal Storage)" since your horizontal touch is reversed.
Click to expand...
Click to collapse
A year after OP, I've ran into the same issue as the OP.
I accidentally flashed an edge kernal (I think, might've just been an incorrect baseband) on my flat S6 (920t). Tried things from flashing correct kernals to wiping to Odin restoring stock firmware. Nothing worked, then I found this and my problem was resolved in 2.4 seconds. I laughed at myself for this one :silly:
(Note: I had a TWRP backup, but didn't try restoring because it was from a previous firmware and I'm not sure it would've worked, which is why I searched for other solutions...and found this one!)
Hi I have got same problem. but afters tiping *#2663# nothing hapend. What can I do?
Ishmael89 said:
A year after OP, I've ran into the same issue as the OP.
I accidentally flashed an edge kernal (I think, might've just been an incorrect baseband) on my flat S6 (920t). Tried things from flashing correct kernals to wiping to Odin restoring stock firmware. Nothing worked, then I found this and my problem was resolved in 2.4 seconds. I laughed at myself for this one :silly:
(Note: I had a TWRP backup, but didn't try restoring because it was from a previous firmware and I'm not sure it would've worked, which is why I searched for other solutions...and found this one!)
Click to expand...
Click to collapse
wolkowicz said:
Hi I have got same problem. but afters tiping *#2663# nothing hapend. What can I do?
Click to expand...
Click to collapse
Which model do you have? The dialer menus might be specific to the model/carrier, I'm not certain about that though.
After rebooting my phone couple of times it works. Thanks!!!
Ishmael89 said:
A year after OP, I've ran into the same issue as the OP.
I accidentally flashed an edge kernal (I think, might've just been an incorrect baseband) on my flat S6 (920t). Tried things from flashing correct kernals to wiping to Odin restoring stock firmware. Nothing worked, then I found this and my problem was resolved in 2.4 seconds. I laughed at myself for this one :silly:
(Note: I had a TWRP backup, but didn't try restoring because it was from a previous firmware and I'm not sure it would've worked, which is why I searched for other solutions...and found this one!)
Click to expand...
Click to collapse
Ishmael89 said:
Which model do you have? The dialer menus might be specific to the model/carrier, I'm not certain about that though.
Click to expand...
Click to collapse
wolkowicz said:
After rebooting my phone couple of times it works. Thanks!!!
Click to expand...
Click to collapse
No problem, glad it worked out and you can use your phone regularly now!
As I have found multiple threads for the same issue, I figured I would post the info in a few of them so if anyone else come looking for the issue and fix - they can get right to the howto instead of digging through multiple threads like I did. More info about the issue was found on the following link/s - https://1024kb.co.nz/galaxy-s6-reversed-touchscreen/ & https://forum.xda-developers.com/showpost.php?p=62289392&postcount=9
You DO not have to flash any stock roms or other versions of twrp to fix this, as it will NOT fix the issue, as near as I can tell something corrupted or changed the setting somewhere on the hidden section of the phone's firmware. All you need to do is access a hidden engineers menu, click on a button and your done.
The hidden adjustment setting is accessible through keypad *#2336# (reverse-entered as #*2114*) (you have to do this as the touchscreen is still reversed so you are unable to enter *#2336# normally). Once the task completed I then was able to press the back key and have it function as normal which confirmed the fix.
Hello everyone,
As this is my first thread, and I have been reading previous assists based on IMEI fixing and couldn't find the answer I am looking for, I really hope that the XDA community can help me fix my Galaxy S4 I9500. I will try to explain the problem the best I can, and I will create a list of every solution I have tried in the 3 week phone fixing saga I have.
1. The problem :
My friend decided he does not need this phone anymore, everything was fine with it except the battery was swollen(but I bought a new one so it doesn't matter). The day before he gave it to me, he accidentaly dropped it in the toilet and it couldn't boot. I opened the phone, cleaned it with alchohol and the phone booted up normally. The thing I noticed was that in the status bar the network symbol was replaced with No signal symbol. I tried 3 SIM cards and none worked. I decided to downgrade to 4.4.2 KitKat version and this is where everything went even worse. I used Odin to downgrade a firmware downloaded from sammobile.com, but I didn't create an /efs backup because I have flashed an Alcatel Idol 2 before and there were no problems with the IMEI or so. It turns out that Samsung devices are different and I am left with NO EFS BACKUP. I know, I should have checked what to do before flashing the device, but what's done is done. The device is doing everything great, there are no problems with Wi-Fi or Bluetooth either, except I cant connect to a network because IMEI is null/null and the Baseband is unknown. The thing is, I am not sure if the IMEI is wiped completely because of a hardware problem, or it's software related because of the /efs folder, because I am not a developer, but a civil engineer :silly:
2. Solutions I've tried so far :
- Flashed many different Android versions;
- Flashed a Lollypop with adonis.pit with Re-partition checked on Odin;
- Tried writing an IMEI and repairing the EFS with Octoplus box;
- Tried flashing an EFS backup from my friend's Galaxy S4 I9500 ( IT IS ILLEGAL IN MANY COUNTRIES, NOT IN MINE, BUT I WANTED TO TRY AND CHANGE THE IMEI LATER SO IT WOULD NOT BE A PROBLEM );
- Tried flashing with a IMEI_null_fix.tar.md5 file which i found on a forum and that didn't fix it either;
- Tried KIES to return the stock ROM but either it does not recognize my device, or it says that my device could not be initialized or so;
- Took the phone to service, but in my town the only service we have is not very professional and they didn't even know the IMEI null does not mean that I will have no wireless connection/bluetooth connection, so they didn't fix it either;
- Tried with EFS Pro, Terminal Emulator and programs similar to those, 3rd party and PlayStore ones;
- Maybe other things but I could not remember because I think I tried everything...
I don't know if the problem can be fixed, but deep inside me I hope that there is a solution, and I think this is the best place to search for help, because it is a great phone and I don't want to throw it away just like that.
Thanks in advance everyone, hope you can come up with a solution.
Anyone please ?
You may get more help in the s4 forum as this is the s6 forum mate.
christopherrrg said:
You may get more help in the s4 forum as this is the s6 forum mate.
Click to expand...
Click to collapse
An admin redirected this thread here, its not me haha...
Thread closed.
OP reposted in the correct section.
Hi all itzyaboi back again with another big miss that I've made...
So let me give you a quick story of what happened...
I tried flashing a custom kernal in my galaxy s6 edge sm-g925i and ended up flashing the wrong one without even taking a backup :silly::silly:
so it got bricked real nice I tried flashing stock firmware no luck it gave me "SW check fail device 4 binary 3" error
So after loads of research I found out the appropriate firmware sorta.....
I flashed it every thing looked great then all of a sudden Drk error pops up.
I fixed it by flashing twrp because that's the only fix I found and that's the only thing working then when phone turns on I keep getting this one error whenever I tried to change my password the setting crashes and I'm not able to use any of the stuff in the setting...
it only happens when I try to change password or add fingerprint.... :crying::crying:
Any kind of help regarding the fix would be appreciated :
Edit: I was also wondering is there anyway to go full stock now?
Thanks XDA
Hello. I posted here long time ago about having a inverted touch after I had to flash my dl1010q due to some virus that installed apps faster than I could delete them.
After finding a supposedly correct firmware and flashing it, I got hit by the dreaded inverted touch.
After more reading here I figured out how to edit my sys prop to get the inverted touch fixed.
But I'm still having issues with "running out of memory" without having a bunch installed and "gps" not working anymore.
I ve tried several firmwares that were supposed be be stock but so far nothing worked.
If someone out there still has the original file, please let me know. Any other help is also appreciated.
Thank you all