Database Info

(ROM) A530FXXU2BRG1 Oreo A530F

Closed per OP request
Download Odin v3.13.1
Extract the firmware file you just downloaded. You should get 5 files:
AP (System & Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_OXM (OXM CSC file, will wipe your phone)
Add each file to it's respective field in Odin v3.13.1.
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a blue box will show up with the COM port number.
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS'. Once the flash is complete, your phone will reboot.

Works on SM-A530F/DS ? Middle east version

Yes.

Can you check if has treble support?
Enviado desde mi SM-A530F mediante Tapatalk

Michiel0912 said:
Download Odin v3.13.1
Extract the firmware file you just downloaded. You should get 5 files:
AP (System & Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_OXM (OXM CSC file, will wipe your phone)
Add each file to it's respective field in Odin v3.13.1.
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a blue box will show up with the COM port number.
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS'. Once the flash is complete, your phone will reboot.
https://mega.nz/#!SnZySaQS
Click to expand...
Click to collapse
No key, we need key to download

Are you sure that it doesnt have any problem to flash it after i flash it can i still use my sim and have a network ?
Sorry for my bad english

Link updated.

Nadeem.alawashreh said:
Are you sure that it doesnt have any problem to flash it after i flash it can i still use my sim and have a network ?
Sorry for my bad english
Click to expand...
Click to collapse
I just tested it with my own A530F Dual Sim version and it works.
If you are not sure, don't do it. Flashing is always a risk.

Marco Lomas said:
Can you check if has treble support?
Enviado desde mi SM-A530F mediante Tapatalk
Click to expand...
Click to collapse
getprop ro.treble.enabled
false

Michiel0912 said:
Yes.
Click to expand...
Click to collapse
Michiel0912 said:
I just tested it with my own A530F Dual Sim version and it works.
If you are not sure, don't do it. Flashing is always a risk.
Click to expand...
Click to collapse
I know how to flash it but i need to know if it works perfect without any problem because after i flash it i cant get back to my firmware because i cant find ?

Thats sad :c thanks!!
Michiel0912 said:
getprop ro.treble.enabled
false
Click to expand...
Click to collapse
Enviado desde mi SM-A530F mediante Tapatalk

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my phone informations if you can help me please

I don't know what you want me to say?

I want to know if i flashed this firmware could i still use my sim and have a network on my mobile
And can i keep my file or it will erase everything

I don't have your version of phone.
Data will be erased as stated in the OP.

Is it different from yours that what i need to know

If you go into download mode, what is your product name?

SM-A530F
On sammobile they said if i use HOME_CSC_OXM i wont lose my data can i do it ?

SM-A530F, I don't have HOME_CSC_OXM.

Michiel0912 said:
getprop ro.treble.enabled
false
Click to expand...
Click to collapse
Can you switch it to true?

Lg g7 thinq (lg710pm) to (g710ulm10g)

Few weeks ago i got a LG G7 “UNLOCKED” on ebay, the phone had a sticker where it said model “LGG710PM”, the bad news i was stuck with a FIRMWARE LM-G710ULM (V10b-LAO-COM) MAY 2018. I tried updating the phone via OTA or LGBridge and i had no luck. So i looked online for the correct KDZ file for the LGG710PM and also no luck, So what i did is look for a G710ULM KDZ, but the only one the i could find was the G710ULM10G_00 (https://www.mylgphones.com/lg-g7-thinq-project-fi-stock-firmware-g710ulm10g.html) . So after searching online and watching some videos on youtube if this could work, i found a youtuber video (MAXLEE) he change a FIRMWARE of sprint to a Canadian FIRMWARE and it work he did it on a LG G6. So what i did is try it on MY G7 model LGG710PM“ the only thing is that on the G7 there's a few more steps to do:
1) Download G710ULM10G_00 KDZ file
https://www.mylgphones.com/lg-g7-thinq-project-fi-stock-firmware-g710ulm10g.html
2) Download LGUP and install (make sure to use this link for download and follow instructions, like this you don't get an error when
you insert the KDZ file and hit START).
https://mega.nz/#!kCpHBaia!xZmico6MYL1T07ffuc8z6cCbs5oU4pKEz5VG-AwfvV0
A) Make sure you don't have LGBrige installed, if so UNINSTALL and delete any folder of LGBridge after you have uninstalled
(C:\Program Files (x86)\LG Electronics)
B) Download the LGUP zip file and unzip, if you don't have the drivers install lgdrives(The file is inside the folder LGUP-LG G7 ThinQ).
After that install “LGUP_Install_Ver_1_14_3 (1).msi “ file.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
C) After installing LGUP you must go to C:\Program Files (x86)\LG Electronics\LGUP and copy the first three files(CODEFIRE, LOG,
model) from the UNZIPED FILE from step B.
D) Go to file “model” (C:\Program Files (x86)\LG Electronics\LGUP\model) then go to file “common”....go to step “E” don't close the
window….
E) Go to the UNZIP FOLDER, go to file WindowsLGFirmwareExtract-1.2.6.1-Release. Run “WindowsLGFirmwareExtract.exe” and select
the KDZ file you downloaded, then make sure you
check on “LGUPc.dll. EXTRACT KDZ.
F) A file “LGUPc.dll” will be created, Copy that file into the folder “common”...... you should had left that window open from step “D”. Rename the actual “LGUP_Common.dll” to
“LGUP_CommonDDD.dll” and “LGUPc.dll” to “LGUP_Common.dll” and then deltate the “LGUP_CommonDDD.dll”.
Open LGUP...put your phone in download mode... select the KDZ file you downloaded from step “1” and in PROCESS select REFURBISH…. Then click START.

Thanks for posting the guide but I don't see any links to download the files on step 2

hytl said:
Thanks for posting the guide but I don't see any links to download the files on step 2
Click to expand...
Click to collapse
True, already put the link, thanks.

Radha09 said:
True, already put the link, thanks.
Click to expand...
Click to collapse
Thank you. I wonder after we upgrade to this firmware, will we be able to get OTA update?

hytl said:
Thank you. I wonder after we upgrade to this firmware, will we be able to get OTA update?
Click to expand...
Click to collapse
i hope so....

I got SPC Code does not match error.

hytl said:
I got SPC Code does not match error.
Click to expand...
Click to collapse
Where did you get that error?

After I click start in LGUP

hytl said:
After I click start in LGUP
Click to expand...
Click to collapse
Did you see the video from Victor Hernandez i know its in Spanish but just to make sure you made the steps.... and one more thing i forgot to mention is that before putting start you need to have you phone in download mode here's a link ....... https://www.youtube.com/watch?v=EkKfPPBzJ1c

Radha09 said:
Where did you get that error?
Click to expand...
Click to collapse
Radha09 said:
Did you see the video from Victor Hernandez i know its in Spanish but just to make sure you made the steps.... and one more thing i forgot to mention is that before putting start you need to have you phone in download mode here's a link ....... https://www.youtube.com/watch?v=EkKfPPBzJ1c
Click to expand...
Click to collapse
Thanks. It's flashing now. I didn't put the phone into download mode.

hytl said:
Thanks. It's flashing now. I didn't put the phone into download mode.
Click to expand...
Click to collapse
:good:

hytl said:
Thanks. It's flashing now. I didn't put the phone into download mode.
Click to expand...
Click to collapse
Cool, sorry that i forgot to mention that step.....hope it works for you too.

Could you please post screenshot of your phone software info? Is your SN under Hardware info blank?

hytl said:
Could you please post screenshot of your phone software info? Is your SN under Hardware info blank?
Click to expand...
Click to collapse
SN under Hardware is BLANK that has always been that way.... cant fix that.

I just checked with LGBridge. It still says "Cannot check software version. Please try again". I don't think we will be able to do OTA update in the future.

hytl said:
I just checked with LGBridge. It still says "Cannot check software version. Please try again". I don't think we will be able to do OTA update in the future.
Click to expand...
Click to collapse
Yeah, i think its because the firmware is from another hardware and not the sprint.... at least we are not stuck on MAY......

Radha09 said:
Where did you get that error?
Click to expand...
Click to collapse
Radha09 said:
Yeah, i think its because the firmware is from another hardware and not the sprint.... at least we are not stuck on MAY......
Click to expand...
Click to collapse
Yeah. I'm glad that we aren't stuck on May patch anymore. I don't remember but I don't think I had wifi calling before I flash this. Now I got wifi calling, so great. Thanks for the great guide.

Great! So is safe to flash then . Besides S/N still blank, any other side effect after flash? I assume storage 64gb still same, imie # still same, phone still unlocked, lte signal better? Good to see wifi calling is enabled.
Sent from my LM-G710 using Tapatalk

jonahy said:
Great! So is safe to flash then . Besides S/N still blank, any other side effect after flash? I assume storage 64gb still same, imie # still same, phone still unlocked, lte signal better? Good to see wifi calling is enabled.
Click to expand...
Click to collapse
Yes I guess it's safe it worked for me and also for member hytl. Everything is working fine, the phone is still unlocked, and everything else is the same nothing changes. You get battery improvement and camera. LTE signal it's the same for me.

Thanks Im gonna try later.. Do I need to do factory rest before flash and after?

error: "Flash preloader error"

I'm trying to flash my Redmi 9A using the MiFlash tool but I keep getting the following error: "Flash preloader error"
I've tried looking it up in google but can't find anything related.
Anyone has any idea on how to fix this error?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Kargax said:
I'm trying to flash my Redmi 9A using the MiFlash tool but I keep getting the following error: "Flash preloader error"
I've tried looking it up in google but can't find anything related.
Anyone has any idea on how to fix this error?
View attachment 5252807
Click to expand...
Click to collapse
Yes me too
Except I have now also turned mine into a bootloop.

Kargax said:
I'm trying to flash my Redmi 9A using the MiFlash tool but I keep getting the following error: "Flash preloader error"
I've tried looking it up in google but can't find anything related.
Anyone has any idea on how to fix this error?
View attachment 5252807
Click to expand...
Click to collapse
If you try to flash the original rom check out this video. It is in Spanish but I think it can help you. At the time it helped me revive a Xiaomi Redmi 8.

sakeyo said:
If you try to flash the original rom check out this video. It is in Spanish but I think it can help you. At the time it helped me revive a Xiaomi Redmi 8.
Click to expand...
Click to collapse
ok - I had the same problem. I needed a cheap Westernized Xiaomi to ensure I can look after my child's digital wellbeing. Was really annoying - I purchased it expecting it to be the same as previous models and years where I have converted for colleagues here in China. However, there were problems immediately.
Seven days for a bootloader unlock - bugger that. Also, unable to install GAPPS without changing to GLobal Rom? urgh!
ok - I have a strange set up involving a MacBook pro and parallels. Mosty it works for my nowadays limited android needs. Certainly, I didn't expect this phone to be such a hassle. After the initial 7 days wait for bootloader (actually 9 - because I tried another count too), I had everything set up with multiple options.
None of the software worked... maybe the problem was the apple parallels thing, but I tried a **** load of things. Finally, bootlooped it... after trying to implement the TWRP. As if wasn't going to accidentally do this with the multitude of options to accidentally mess with.
So ... Long story ... short, I ended up not using parallels or software at all.
Did the fastboot/adb solve via Mac. Super annoying, because I don't really know and was unable to find out which I files I was supposed to flash.
Managed to un-bootloop from a Chinese Rom, but couldn't get any of the Roms downloaded to work... Was wondering even if my 9A 4gb 64gb mem was even classified as a Redmi 9A in global areas?
Anyway, finally fastboot Flashed a whole heap of files from a European from that did the trick. Think it was this one:
dandelion_eea_global_images_V12.0.11.0.QCDEUXM_20210225.0000.00_10.0_eea
But I seriously have no idea which files I was supposed to and which order etc.
I think I went something like fastboot flashed: recovery, boot, Vbmeta_system, vbmeta, vbmeta_vendor, userdata, super, recovery.
Super stressful....
HOpe this is some help.
Good luck.

s327374 said:
Yes me too
Except I have now also turned mine into a bootloop.
Click to expand...
Click to collapse
how did you fix it?

Kargax said:
I'm trying to flash my Redmi 9A using the MiFlash tool but I keep getting the following error: "Flash preloader error"
I've tried looking it up in google but can't find anything related.
Anyone has any idea on how to fix this error?
View attachment 5252807
Click to expand...
Click to collapse
did you find a solution?

Sikelela Mazingi said:
how did you fix it?
Click to expand...
Click to collapse
If your device can boots finely, you can skip flashing preloader.

VD171 said:
If your device can boots finely, you can skip flashing preloader.
Click to expand...
Click to collapse
itis stuck in bootloop

VD171 said:
If your device can boots finely, you can skip flashing preloader.
Click to expand...
Click to collapse
how do i Skip it?

just put the stock rom folder in the C disk partition, luckily it worked for me.

Fixed!
Here's what you do:
1) Make sure there are no spaces in the name of your ROM folder and MiFlash folder
2) Move your rom folder inside MiFlash folder.
3) Now move that MiFlash folder inside C drive. Directly inside C drive, not any other folder.
Go back and flash

RyanCr7 said:
Fixed!
Here's what you do:
1) Make sure there are no spaces in the name of your ROM folder and MiFlash folder
2) Move your rom folder inside MiFlash folder.
3) Now move that MiFlash folder inside C drive. Directly inside C drive, not any other folder.
Go back and flash
Click to expand...
Click to collapse
ERES EL MEJOR , FUISTE EL UNICO QUE ME AYUDO A REVIVIR MI CELULAR TE ESTOY MUY AGRADECIDO , CASI PIENSO QUE TODO ESTABA PERDIDO

Question Poco X3 Pro HardBrick Used Mi FLash Tool and get error sahara_rx_data:237

I tried a lot of things and i dont know what to do next ,but MI FLASH dose not need an autorized account but displays 2 erors:
First:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Second:
If someone knows how to solve it, please reply.

Try to rename your folders into short names. I think I had the same issue yesterday, after renaming it was fine.

IkarusVC said:
Try to rename your folders into short names. I think I had the same issue yesterday, after renaming it was fine.
Click to expand...
Click to collapse
No ,its not the problem.
It failed again after 90sec.

Antonio7489 said:
No ,its not the problem.
It failed again after 90sec.
Click to expand...
Click to collapse
Hi, Put the files inside C:\ not on your desktop and try

TempAccount10001 said:
Hi, Put the files inside C:\ not on your desktop and try
Click to expand...
Click to collapse
I get the same error after 90sec,its from somthing related to sahara_rx_data:237

try redownloading your rom, maybe it' corrupted. then flash again

icodix said:
try redownloading your rom, maybe it' corrupted. then flash again
Click to expand...
Click to collapse
Trust me i redownloaded the fastboot firmware around 3 Times ,its not about that.

Normally it shows the Device ID (it has 8 letters, like in Fastboot).
How do you connect your device on which OS.

SmartJuwel said:
Normally it shows the Device ID (it has 8 letters, like in Fastboot).
How do you connect your device on which OS.
Click to expand...
Click to collapse
This is if u don't have a driver

Antonio7489 said:
I get the same error after 90sec,its from somthing related to sahara_rx_data:237
Click to expand...
Click to collapse
Try getting latest mi flash tool

Its on EDL mode .. this is why no id only COM
I have a bricked one too, trying to solve it
In unloock tool :
it said snapdragon 855(sm8150) when reading the SoC
But the firmware only have firehose sm7150
Is this an issue? Or it already included in sm7150?
Need someone help to unbrick the phone
Tried multible firmwares with different versions
EFT pro, Unlocktool, Xiaome tool, pro all these tools and even Qifil
Is it from SoC? Because its auto EDL mode without test point
Help plz

SoJustMe said:
Its on EDL mode .. this is why no id only COM
I have a bricked one too, trying to solve it
In unloock tool :
it said snapdragon 855(sm8150) when reading the SoC
But the firmware only have firehose sm7150
Is this an issue? Or it already included in sm7150?
Need someone help to unbrick the phone
Tried multible firmwares with different versions
EFT pro, Unlocktool, Xiaome tool, pro all these tools and even Qifil
Is it from SoC? Because its auto EDL mode without test point
Help plz
Click to expand...
Click to collapse
Friend it's nothing to be done , send it to an authorized Xiaomi repair center and claim warranty while you have it.The phone can't exit edl mode without access codes, I repaired mine at a repair center authorized by Xiaomi , they replaced the motherboard (it taked around week) and then they send it back quickly.Trust me it's the only safe way(if you didn't open the back of the phone,then there is no warranty to be claimed) , you just need to tell them that the phone freezed,turned itself off and is not responding to power button,if you can drain it's battery so nothing is to be seen(any possible logs),good luck with repairing the phone.

Help! My phone wont flash

Hello! i am super sorry if this is the wrong forum but i don't know where to post this.
My samsung phone randomly died after i flashed twrp, no problem i thought because this is the phone i put custom roms onto.
Welp i was very wrong. It kept saying unrecognized usb is connected with windows but sometimes it went through. And when i went to flash the stock rom it kept doing this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I really don't know what is causing it but i think the emmc is fried.
Any help will be very appreciated!
Thank you in advance.

Use Samsung's ODIN to flash.

jwoegerbauer said:
Use Samsung's ODIN to flash.
Click to expand...
Click to collapse
I did, that was the log when i tried to flash

not sure what you have done to that phone, are you sure usb jack and cable is healthy? lost connection sounds like hardware issue.
However, the only other flash tool is heimdall, but it needs files extracted and converted.
https://github.com/amo13/Heimdall/releases
if you're 100% sure the usb-connection is healthy, try to re-partition with pit file extracted from CSC.
TRY AT OWN RISK
https://technastic.com/odin-nand-erase-samsung

aIecxs said:
not sure what you have done to that phone, are you sure usb jack and cable is healthy? lost connection sounds like hardware issue.
However, the only other flash tool is heimdall, but it needs files extracted and converted.
https://github.com/amo13/Heimdall/releases
if you're 100% sure the usb-connection is healthy, try to re-partition with pit file extracted from CSC.
TRY AT OWN RISK
https://technastic.com/odin-nand-erase-samsung
Click to expand...
Click to collapse
Update:
There is no PIT file for this phone at all, heimdall dosent work at all soo i think im screwed

probably... unless you mention device model. then we can tell you where to get pit file and how heimdall works.

aIecxs said:
probably... unless you mention device model. then we can tell you where to get pit file and how heimdall works.
Click to expand...
Click to collapse
Its a gt-s6310n
Hope a pit file exists.

Oh Jelly Bean Android 4.1.2 wow. you can try older version of Odin3. But most likely EMMC is weared-out.
download stock ROM according to your region code.
https://samfw.com/firmware/GT-S6310N
extract CSC_*.tar.md5 with 7-zip and find the pit file.

aIecxs said:
Oh Jelly Bean Android 4.1.2 wow. you can try older version of Odin3. But most likely EMMC is weared-out.
download stock ROM according to your region code.
https://samfw.com/firmware/GT-S6310N
extract CSC_*.tar.md5 with 7-zip and find the pit file.
Click to expand...
Click to collapse
I have never seen a CSC without a pit file.

Did not find any pit file (maybe due the fact that device comes carrier locked)
however try with Odin v3.10 or older
GlassROM Young N - ROM for GT-S6310N
Check this thread for a working ROM! Description GlassROM Young N is a ROM (the first one, if I am not in error) for the Samsung Galaxy Young GT-S6310N (not S6310!, but the N variant). I was horrified by this low-end device, because there...
forum.xda-developers.com

aIecxs said:
Did not find any pit file (maybe due the fact that device comes carrier locked)
however try with Odin v3.10 or older
GlassROM Young N - ROM for GT-S6310N
Check this thread for a working ROM! Description GlassROM Young N is a ROM (the first one, if I am not in error) for the Samsung Galaxy Young GT-S6310N (not S6310!, but the N variant). I was horrified by this low-end device, because there...
forum.xda-developers.com
Click to expand...
Click to collapse
I tried to use odin v3.10 but it wont stop doing this and now i think its completely dead.

no clue. I can help you with heimdall if you post errors.

aIecxs said:
no clue. I can help you with heimdall if you post errors.
Click to expand...
Click to collapse
I downloaded hemdall and im reading the README and it says "Put your device into download mode and plug it in." its something for drivers but it keeps saying USB device not recognized

repair usb jack (or replace mainboard)
https://www.aliexpress.com/item/1005002342422692.html

aIecxs said:
repair usb jack (or replace mainboard)
https://www.aliexpress.com/item/1005002342422692.html
Click to expand...
Click to collapse
Its dead.
Welp thank you alecxs for all your help, you were very helpful with this.