Maybe someone knows how to activate the speakers to work in stereo mode, make a modification Dual Speakers as on many other phones?
The original mixer_paths.xml file from the G100 firmware is attached.
Cannot I believe, requires ACDB edits
I'm sorry, but I didn't understand the question.
ilia3367 said:
Maybe someone knows how to activate the speakers to work in stereo mode, make a modification Dual Speakers as on many other phones?
The original mixer_paths.xml file from the G100 firmware is attached.
Click to expand...
Click to collapse
did you success？
我也希望有人弄这个！
Related
Q&A for Sound Mod v4.0 for Z3 [XLoud, Clear Phase, DSP, Dolby, Stereo speaker]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Sound Mod v4.0 for Z3 [XLoud, Clear Phase, DSP, Dolby, Stereo speaker]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
dj_richard05 said:
Can someone plz upload the lollipop kernel as I have the zip file downloaded and cannot extract the kernel file.
Click to expand...
Click to collapse
Hello. Sorry for my English. There is some risk to my speakers use this mod ? I can break them by forcing more volume?
alvadom said:
Hello. Sorry for my English. There is some risk to my speakers use this mod ? I can break them by forcing more volume?
Click to expand...
Click to collapse
No their is no risk to speaker
you need to use normal mod
if there is any mod with name Louder sound then do not use it
otherwise my mod have same volume as sony stock. I just enable Stereo sound notification and sony sound settings
Can someone please upload the lollipop kernel. I wanna use this awesome mod
Clear Phase itself off .. Anyone else with this problem?
Se gostou do meu trabalho, clique em thanks.
Xperia Z3 - Sensation by Ogunja - D6643
I installed Stereo Sound Ringtone Speakers + Louder Sound and now the sound of caller's voice in any calls sounds super louder. It's like i'm with the Audio Output turned ON. And the minimum volume still louder.
It's because the Louder Sound part of the mod?
Any way to fix it?
What happen if i only install Stereo Sound Ringtone Only overwriting the previous mod? It will correct it?
Using Lollipop btw.
Thanks!
working perfect on 276. thanks!
Bluetooth bitpool to minimum 64bit would really help both Android in general but also this sound mod.. Is this something you can look into op??
Same here....any idea?
ogunja said:
Clear Phase itself off .. Anyone else with this problem?
Se gostou do meu trabalho, clique em thanks.
Xperia Z3 - Sensation by Ogunja - D6643
Click to expand...
Click to collapse
Can I install Louder Headset only?
Rooted just to get this mod. The instructions were not very clear but I do have stereo ringing but not stereo loudspeaker in call. Can't see beats audio, dolby or any other option.
Any videos for this mod?
Sent from my D6603 using XDA Free mobile app
I need only headphones boost and stereo, my firmware is .28 can you please make it? And maybe tell me that I need change in "mixer_paths.xml" for headphones headphones. Thanks
I am currently running 5.5 without any backup (no risk no fun :b). Can I just flash 6.0 on the top or do I have to revert back first?
Sent from my D6603 using Tapatalk
No reproduce los archivos en formato flac (hr) en mi Xperia z3
Headphones & Stereo only
Make for me Only Headphones & Stereo please....
Dolby app force closes after flashing 7.0v need help plz ... Before it was working fine on 6.4v
Not working for me sound Mod 7.0, I've try with 3 different roms. I enable awesome player and nothing. I disabled Sony stock sound.
Enviado desde mi D6603 mediante Tapatalk
I flashed the loud version of this mod and it's a bit too loud at min. Volume.
So I want to flash the normal version, do I have to restore system first? Or can I directly flash it ontop without issues?
A quick reply is appreciated. Thanks.
Good work
The down firing speaker on the op6 is not that loud. Is it possible for someone to create a mod to increase the volume or use the earpiece speaker as secondary speaker??
Yes we need this for op6 that'd be aw3some!
yes... one just need to edit mixer_path.xml to gain this...
@muntasir, would you be knowing how it would be done ?
Up this thread so that there will be development
anupsnair said:
@muntasir, would you be knowing how it would be done ?
Click to expand...
Click to collapse
It was done on the galaxy note 8. Look at this thread : https://forum.xda-developers.com/galaxy-note-8/themes/dual-speaker-mod-note8-exynos-t3676091.
I m wainting for my replacement phone and can t try for the moment. You can compare the note 8 file and the 1+6 one to try yourself. Otherwise, wheni will receive mine, i will try and if all run as expected, i will share.
jkr192 said:
It was done on the galaxy note 8. Look at this thread : https://forum.xda-developers.com/galaxy-note-8/themes/dual-speaker-mod-note8-exynos-t3676091.
I m wainting for my replacement phone and can t try for the moment. You can compare the note 8 file and the 1+6 one to try yourself. Otherwise, wheni will receive mine, i will try and if all run as expected, i will share.
Click to expand...
Click to collapse
Thanks, but i'm not sure if it works for op6 because I think different speakers are used. Not an expert here, but it might damage the speakers if the configuration is not compatible with the speakers.
On a side note, if there's gonna be development please post in the mods forum.
FYI OOS doesn't have a mixer_paths.xml file the only thing I see that might work is the audio_policy.conf file but it's highly unlikely. Not sure about LOS, but that might have a mixer_paths file
deleted
TURBO2012 said:
hi.... when time permits, i am going to look into it.... i was going to do it anyways.....i know what to look.... i did this for samsung 7.... paths are different, but i can trans-code this...
t
Click to expand...
Click to collapse
Thanks so much!!! Shall look forward to it :good:
These are the only mixer_paths files I was able to find in the system file. Hopefully, one of these is what is needed.
https://drive.google.com/drive/folders/1aAiW4axh9DokknuP5ZT_mDbrNM65btQ_?usp=sharing
Hey guys! I think that there isnt a GoogleCam support thread for the Sony XZ3, so let's start one!
All of the ports for the Google Camera can be found on this site: https://www.celsoazevedo.com/files/android/google-camera/. The problem is our Sony XZ3 isn't supported by the newer versions. I have tried one older version that was working, but the quality was bad compared to the stock cam so it wasnt worth it.
Let's use this thread to find a working settings file for the newer Google Camera ports or for discussion on anything related to this port for XZ3.
We need fully supported gcam for Sony XZ3.
Any updates?
Unlocked Bootloader can solve this problem
durrjunaid said:
Unlocked Bootloader can solve this problem
Click to expand...
Click to collapse
Which Gcam can be used after bootloader unlocked
durrjunaid said:
Unlocked Bootloader can solve this problem
Click to expand...
Click to collapse
Don't think so, the problem is with the level of support that the Camera gives, I can't recall the exact thing, but it was something along the lines whether the camera can support RAW output, which is not the case with the XZ3.
duckwind said:
Don't think so, the problem is with the level of support that the Camera gives, I can't recall the exact thing, but it was something along the lines whether the camera can support RAW output, which is not the case with the XZ3.
Click to expand...
Click to collapse
No solution to get raw support. Too bad for xz3. So unlocked BL only for taste new android without any camera mod?
duckwind said:
Don't think so, the problem is with the level of support that the Camera gives, I can't recall the exact thing, but it was something along the lines whether the camera can support RAW output, which is not the case with the XZ3.
Click to expand...
Click to collapse
I think it is possible via magisk or via custom recovery
durrjunaid said:
I think it is possible via magisk or via custom recovery
Click to expand...
Click to collapse
Magisk can change the raw support?
Waklu88 said:
Magisk can change the raw support?
Click to expand...
Click to collapse
[MAGISK][APP][FIX]Google Camera with HDR+ on FRONT/BACK, Portrait mod fix and Guides
As everyone was asking for some guides and fixes of the Google Camera on our Mi Note 3 device, I decided to help you out with a guide and all necessary resources to get it working. First of all, for people new to Google Camera, follow dimi89 's...
forum.xda-developers.com
durrjunaid said:
[MAGISK][APP][FIX]Google Camera with HDR+ on FRONT/BACK, Portrait mod fix and Guides
As everyone was asking for some guides and fixes of the Google Camera on our Mi Note 3 device, I decided to help you out with a guide and all necessary resources to get it working. First of all, for people new to Google Camera, follow dimi89 's...
forum.xda-developers.com
Click to expand...
Click to collapse
Wow, that does say enabling Camera2Api, have you tried that?
Has anyone tried magisk mod on XZ3 for Gcam? Has it worked for anyone? Any updates will be helpful. Really stressed that this device is capable enough but is tied down by software limitations.
Speaker output is low compared to the stock rom which was louder and clearer!
Can you please fix this in the September update?
Thank you very much for your hard work!
Asusdada said:
Speaker output is low compared to the stock rom which was louder and clearer!
Can you please fix this in the September update?
Thank you very much for your hard work!
Click to expand...
Click to collapse
LOL please reply in the thread for rom you are using, Include your phone's name exampl:
(Xiaomi redmi 9 pro)
Lineage OS
Volume Low, A lot lower and less clear than Stock rom
and also if you're using magisk, search for low volume fix module
or use viper4Android
I am sorry.
Phone- Asus max pro m1.
- Pixel experience v-11 rom, august update.
I have to shout to be heard by people when I call them by phone.
No, I am not using magisk. My phone is not rooted.
Thanks
MOD ACTION:
Thread closed as duplicate of https://forum.xda-developers.com/posts/85485259/
If i try to connect my bluetooth headphones on pixel experience they dont work can someone tell me how to fix this?
Edit: i found the solution if you guys are having problems like me make sure you have the "Use System Wide BT HAL" checkbox enabled on the Misc page of Treble App. If not, enable and reboot.
elosanta said:
If i try to connect my bluetooth headphones on pixel experience they dont work can someone tell me how to fix this?
Edit: i found the solution if you guys are having problems like me make sure you have the "Use System Wide BT HAL" checkbox enabled on the Misc page of Treble App. If not, enable and reboot.
Click to expand...
Click to collapse
How did you install pixel experience rom on Samsung A22 5g model?
Rifath836 said:
How did you install pixel experience rom on Samsung A22 5g model?
Click to expand...
Click to collapse
I used a GSI
Offtopic but your post made me realize it was a treble setting behind why V4A or any other audio mods weren't working. This was a problem that confused me for weeks. Thank you.